# Copyright (c) 2016 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. *** Settings *** | Documentation | Keywords for VLAN tests | Resource | resources/libraries/robot/default.robot | Resource | resources/libraries/robot/l2_xconnect.robot | Library | resources.libraries.python.L2Util | Library | resources.libraries.python.InterfaceUtil | Library | resources.libraries.python.NodePath *** Keywords *** | VLAN subinterfaces initialized on 3-node topology | | [Arguments] | ${DUT1} | ${INT1} | ${DUT2} | ${INT2} | ${SUB_ID} | | ... | ${OUTER_VLAN_ID} | ${INNER_VLAN_ID} | ${TYPE_SUBIF} | | [Documentation] | *Create two subinterfaces on DUTs.* | | ... | | ... | *Arguments:* | | ... | - DUT1 - Node to add sub-interface. | | ... | - INT1 - Interface name on which create sub-interface. | | ... | - DUT2 - Node to add sub-interface. | | ... | - INT2 - Interface name on which create sub-interface. | | ... | - SUB_ID - ID of the sub-interface to be created. | | ... | - OUTER_VLAN_ID - Outer VLAN ID. | | ... | - INNER_VLAN_ID - Inner VLAN ID. | | ... | - TYPE_SUBIF - Type of sub-interface. | | ... | | ... | _Set testcase variables with name and index of created interfaces:_ | | ... | - subif_name_1 | | ... | - subif_index_1 | | ... | - subif_name_2 | | ... | - subif_index_2 | | ... | | ${INT1_name}= | Get interface name | ${DUT1} | ${INT1} | | ${subif_name_1} | ${subif_index_1}= | Create subinterface | ${DUT1} | | ... | ${INT1_name} | ${SUB_ID} | | ... | ${OUTER_VLAN_ID} | ${INNER_VLAN_ID} | | ... | ${TYPE_SUBIF} | | ${INT2_name}= | Get interface name | ${DUT2} | ${INT2} | | ${subif_name_2} | ${subif_index_2}= | Create subinterface | ${DUT2} | | ... | ${INT2_name} | ${SUB_ID} | | ... | ${OUTER_VLAN_ID} | ${INNER_VLAN_ID} | | ... | ${TYPE_SUBIF} | | Set Interface State | ${DUT1} | ${subif_index_1} | up | | Set Interface State | ${DUT2} | ${subif_index_2} | up | | Set Test Variable | ${subif_name_1} | | Set Test Variable | ${subif_index_1} | | Set Test Variable | ${subif_name_2} | | Set Test Variable | ${subif_index_2} | VLAN dot1q subinterfaces initialized on 3-node topology | | [Arguments] | ${DUT1} | ${INT1} | ${DUT2} | ${INT2} | ${SUB_ID} | | [Documentation] | *Create two dot1q subinterfaces on DUTs.* | | ... | | ... | *Arguments:* | | ... | - DUT1 - Node to add sub-interface. | | ... | - INT1 - Interface name on which create VLAN sub-interface. | | ... | - DUT2 - Node to add sub-interface. | | ... | - INT2 - Interface name on which create VLAN sub-interface. | | ... | - SUB_ID - ID of the sub-interface to be created. | | ... | | ... | _Set testcase variables with name and index of created interfaces:_ | | ... | - subif_name_1 | | ... | - subif_index_1 | | ... | - subif_name_2 | | ... | - subif_index_2 | | ... | | ... | *Example:* | | ... | | ... | \| VLAN dot1q subinterfaces initialized on 3-node topology \ | | ... | \| ${nodes['DUT1']} \| ${dut1_if2} \| ${nodes['DUT2']} \ | | ... | \| ${dut1_if2} \| 10 \| | | ... | | ${INT1_NAME}= | Get interface name | ${DUT1} | ${INT1} | | ${INT2_NAME}= | Get interface name | ${DUT2} | ${INT2} | | ${subif_name_1} | ${subif_index_1}= | Create Vlan Subinterface | | | ... | ${DUT1} | ${INT1_NAME} | ${SUB_ID} | | ${subif_name_2} | ${subif_index_2}= | Create Vlan Subinterface | | | ... | ${DUT2} | ${INT2_NAME} | ${SUB_ID} | | Set Interface State | ${DUT1} | ${subif_index_1} | up | | Set Interface State | ${DUT2} | ${subif_index_2} | up | | Set Test Variable | ${subif_name_1} | | Set Test Variable | ${subif_index_1} | | Set Test Variable | ${subif_name_2} | | Set Test Variable | ${subif_index_2} | L2 tag rewrite method setup on interfaces | | [Arguments] | ${DUT1} | ${SUB_INT1} | ${DUT2} | ${SUB_INT2} | | ... | ${TAG_REWRITE_METHOD} | | [Documentation] | *Setup tag rewrite on sub-interfaces on DUTs.* | | ... | | ... | *Arguments:* | | ... | - DUT1 - Node to rewrite tags. | | ... | - SUB_INT1 - Interface on which rewrite tags. | | ... | - DUT2 - Node to rewrite tags. | | ... | - SUB_INT2 - Interface on which rewrite tags. | | ... | - TAG_REWRITE_METHOD - Method of tag rewrite. | | ... | | L2 Vlan tag rewrite | ${DUT1} | ${SUB_INT1} | ${TAG_REWRITE_METHOD} | | L2 Vlan tag rewrite | ${DUT2} | ${SUB_INT2} | ${TAG_REWRITE_METHOD} | Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect | | [Arguments] | ${DUT1} | ${INT1} | ${SUB_INT1} | | ... | ${DUT2} | ${INT2} | ${SUB_INT2} | | [Documentation] | *Add interface and subinterface to bidirectional | | ... | L2-xconnect on DUTs.* | | ... | | ... | *Arguments:* | | ... | - DUT1 - Node to add bidirectional cross-connect. | | ... | - INT1 - Interface to add to the cross-connect. | | ... | - SUB_INT1 - Sub-interface to add to the cross-connect. | | ... | - DUT2 - Node to add bidirectional cross-connect. | | ... | - INT2 - Interface to add to the cross-connect. | | ... | - SUB_INT2 - Sub-interface to add to the cross-connect. | | ... | | L2 setup xconnect on DUT | ${DUT1} | ${INT1} | ${SUB_INT1} | | L2 setup xconnect on DUT | ${DUT2} | ${INT2} | ${SUB_INT2} | Vlan Subinterface Created | | [Documentation] | Create VLAN sub-interface on DUT and set admin status up. | | ... | | ... | *Arguments:* | | ... | - dut_node - Node to add VLAN sub-intreface. Type: dictionary | | ... | - interface - Interface to create VLAN sub-interface. Type: string | | ... | - vlan_id - VLAN ID. Type: integer | | ... | | ... | *Return:* | | ... | - vlan_name - VLAN sub-interface name. Type: string | | ... | - vlan_index - VLAN sub-interface SW index. Type: integer | | ... | | ... | *Example:* | | ... | | ... | \| Vlan Subinterface Created \| ${nodes['DUT1']} \| port3 \| 100 \| | | ... | | [Arguments] | ${dut_node} | ${interface} | ${vlan_id} | | [Return] | ${vlan_name} | ${vlan_index} | | ${interface_name}= | Get interface name | ${dut_node} | ${interface} | | ${vlan_name} | ${vlan_index}= | Create Vlan Subinterface | | ... | ${dut_node} | ${interface_name} | ${vlan_id} | | Set Interface State | ${dut_node} | ${vlan_index} | up | Tagged Subinterface Created | | [Documentation] | Create tagged sub-interface on DUT. Type of tagged \ | | ... | sub-intreface depends on type_subif value: | | ... | - one_tag -> VLAN | | ... | - two_tags -> QinQ VLAN | | ... | - two_tags dot1ad - DOT1AD | | ... | | ... | *Arguments:* | | ... | - dut_node - Node to add VLAN sub-intreface. Type: dictionary | | ... | - interface - Interface to create tagged sub-interface. Type: string | | ... | - subif_id - Sub-interface ID. Type: integer | | ... | - outer_vlan_id - VLAN (outer) ID (Optional). Type: integer | | ... | - inner_vlan_id - VLAN inner ID (Optional). Type: integer | | ... | - type_subif - Sub-interface type (Optional). Type: string | | ... | | ... | *Return:* | | ... | - subif_name - Sub-interface name. Type: string | | ... | - subif_index - Sub-interface SW index. Type: integer | | ... | | ... | *Example:* | | ... | | ... | \| Tagged Subinterface Created \| ${nodes['DUT1']} \| port1 \| 10 \ | | ... | \| outer_vlan_id=100 \| inner_vlan_id=200 \ | | ... | \| type_subif=two_tags dot1ad \| | | ... | | [Arguments] | ${dut_node} | ${interface} | ${subif_id} | | ... | ${outer_vlan_id}=${None} | ${inner_vlan_id}=${None} | | ... | ${type_subif}=${None} | | [Return] | ${subif_name} | ${subif_index} | | ${interface_name}= | Get interface name | ${dut_node} | ${interface} | | ${subif_name} | ${subif_index}= | Create Subinterface | | ... | ${dut_node} | ${interface_name} | ${subif_id} | | ... | outer_vlan_id=${outer_vlan_id} | inner_vlan_id=${inner_vlan_id} | | ... | type_subif=${type_subif} | L2 Tag Rewrite Method Is Set On Interface | | [Documentation] | Set L2 tag rewrite on (sub-)interface on DUT | | ... | | ... | *Arguments:* | | ... | - dut_node - Node to set L2 tag rewrite method. Type: dictionary | | ... | - interface - (Sub-)interface name or SW index to set L2 tag rewrite | | ... | method. Type: string or integer | | ... | - tag_rewrite_method - Tag rewrite method. Type: string | | ... | - push_dot1q - True to push tags as Dot1q, False to push tags as | | ... | Dot1ad (Optional). Type: boolean | | ... | - tag1_id - VLAN tag1 ID (Optional). Type: integer | | ... | - tag2_id - VLAN tag2 ID (Optional). Type: integer | | ... | | ... | *Return:* | | ... | | ... | - No value returned | | ... | | ... | *Example:* | | ... | | ... | \| L2 Tag Rewrite Method Is Set On Interface \| ${nodes['DUT1']} \ | | ... | \| 9 \| pop-1 \| | | ... | \| L2 Tag Rewrite Method Is Set On Interface \| ${nodes['DUT2']} \ | | ... | \| 10 \| translate-1-2 \| push_dot1q=${False} \| tag1_id=10 \ | | ... | \| tag1_id=20 \| | | ... | | [Arguments] | ${dut_node} | ${interface} | ${tag_rewrite_method} | | ... | ${push_dot1q}=${True} | ${tag1_id}=${None} | ${tag2_id}=${None} | | ${result}= | Evaluate | isinstance($interface, int) | | ${interface_name}= | Run Keyword If | ${result} | Set Variable | ${interface} | | ... | ELSE | Get interface name | ${dut_node} | ${interface} | | L2 Vlan Tag Rewrite | ${dut_node} | ${interface_name} | ${tag_rewrite_method} | | ... | push_dot1q=${push_dot1q} | tag1_id=${tag1_id} | tag2_id=${tag2_id}