# Copyright (c) 2020 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. """Algorithms to generate tables. """ import logging import csv import re from collections import OrderedDict from xml.etree import ElementTree as ET from datetime import datetime as dt from datetime import timedelta from copy import deepcopy import plotly.graph_objects as go import plotly.offline as ploff import pandas as pd from numpy import nan, isnan from yaml import load, FullLoader, YAMLError from pal_utils import mean, stdev, classify_anomalies, \ convert_csv_to_pretty_txt, relative_change_stdev, relative_change REGEX_NIC = re.compile(r'(\d*ge\dp\d\D*\d*[a-z]*)') def generate_tables(spec, data): """Generate all tables specified in the specification file. :param spec: Specification read from the specification file. :param data: Data to process. :type spec: Specification :type data: InputData """ generator = { u"table_merged_details": table_merged_details, u"table_soak_vs_ndr": table_soak_vs_ndr, u"table_perf_trending_dash": table_perf_trending_dash, u"table_perf_trending_dash_html": table_perf_trending_dash_html, u"table_last_failed_tests": table_last_failed_tests, u"table_failed_tests": table_failed_tests, u"table_failed_tests_html": table_failed_tests_html, u"table_oper_data_html": table_oper_data_html, u"table_comparison": table_comparison, u"table_weekly_comparison": table_weekly_comparison } logging.info(u"Generating the tables ...") for table in spec.tables: try: if table[u"algorithm"] == u"table_weekly_comparison": table[u"testbeds"] = spec.environment.get(u"testbeds", None) generator[table[u"algorithm"]](table, data) except NameError as err: logging.error( f"Probably algorithm {table[u'algorithm']} is not defined: " f"{repr(err)}" ) logging.info(u"Done.") def table_oper_data_html(table, input_data): """Generate the table(s) with algorithm: html_table_oper_data specified in the specification file. :param table: Table to generate. :param input_data: Data to process. :type table: pandas.Series :type input_data: InputData """ logging.info(f" Generating the table {table.get(u'title', u'')} ...") # Transform the data logging.info( f" Creating the data set for the {table.get(u'type', u'')} " f"{table.get(u'title', u'')}." ) data = input_data.filter_data( table, params=[u"name", u"parent", u"show-run", u"type"], continue_on_error=True ) if data.empty: return data = input_data.merge_data(data) sort_tests = table.get(u"sort", None) if sort_tests: args = dict( inplace=True, ascending=(sort_tests == u"ascending") ) data.sort_index(**args) suites = input_data.filter_data( table, continue_on_error=True, data_set=u"suites" ) if suites.empty: return suites = input_data.merge_data(suites) def _generate_html_table(tst_data): """Generate an HTML table with operational data for the given test. :param tst_data: Test data to be used to generate the table. :type tst_data: pandas.Series :returns: HTML table with operational data. :rtype: str """ colors = { u"header": u"#7eade7", u"empty": u"#ffffff", u"body": (u"#e9f1fb", u"#d4e4f7") } tbl = ET.Element(u"table", attrib=dict(width=u"100%", border=u"0")) trow = ET.SubElement(tbl, u"tr", attrib=dict(bgcolor=colors[u"header"])) thead = ET.SubElement( trow, u"th", attrib=dict(align=u"left", colspan=u"6") ) thead.text = tst_data[u"name"] trow = ET.SubElement(tbl, u"tr", attrib=dict(bgcolor=colors[u"empty"])) thead = ET.SubElement( trow, u"th", attrib=dict(align=u"left", colspan=u"6") ) thead.text = u"\t" if tst_data.get(u"show-run", u"No Data") == u"No Data": trow = ET.SubElement( tbl, u"tr", attrib=dict(bgcolor=colors[u"header"]) ) tcol = ET.SubElement( trow, u"td", attrib=dict(align=u"left", colspan=u"6") ) tcol.text = u"No Data" trow = ET.SubElement( tbl, u"tr", attrib=dict(bgcolor=colors[u"empty"]) ) thead = ET.SubElement( trow, u"th", attrib=dict(align=u"left", colspan=u"6") ) font = ET.SubElement( thead, u"font", attrib=dict(size=u"12px", color=u"#ffffff") ) font.text = u"." return str(ET.tostring(tbl, encoding=u"unicode")) tbl_hdr = ( u"Name", u"Nr of Vectors", u"Nr of Packets", u"Suspends", u"Cycles per Packet", u"Average Vector Size" ) for dut_data in tst_data[u"show-run"].values(): trow = ET.SubElement( tbl, u"tr", attrib=dict(bgcolor=colors[u"header"]) ) tcol = ET.SubElement( trow, u"td", attrib=dict(align=u"left", colspan=u"6") ) if dut_data.get(u"threads", None) is None: tcol.text = u"No Data" continue bold = ET.SubElement(tcol, u"b") bold.text = ( f"Host IP: {dut_data.get(u'host', '')}, " f"Socket: {dut_data.get(u'socket', '')}" ) trow = ET.SubElement( tbl, u"tr", attrib=dict(bgcolor=colors[u"empty"]) ) thead = ET.SubElement( trow, u"th", attrib=dict(align=u"left", colspan=u"6") ) thead.text = u"\t" for thread_nr, thread in dut_data[u"threads"].items(): trow = ET.SubElement( tbl, u"tr", attrib=dict(bgcolor=colors[u"header"]) ) tcol = ET.SubElement( trow, u"td", attrib=dict(align=u"left", colspan=u"6") ) bold = ET.SubElement(tcol, u"b") bold.text = u"main" if thread_nr == 0 else f"worker_{thread_nr}" trow = ET.SubElement( tbl, u"tr", attrib=dict(bgcolor=colors[u"header"]) ) for idx, col in enumerate(tbl_hdr): tcol = ET.SubElement( trow, u"td", attrib=dict(align=u"right" if idx else u"left") ) font = ET.SubElement( tcol, u"font", attrib=dict(size=u"2") ) bold = ET.SubElement(font, u"b") bold.text = col for row_nr, row in enumerate(thread): trow = ET.SubElement( tbl, u"tr", attrib=dict(bgcolor=colors[u"body"][row_nr % 2]) ) for idx, col in enumerate(row): tcol = ET.SubElement( trow, u"td", attrib=dict(align=u"right" if idx else u"left") ) font = ET.SubElement( tcol, u"font", attrib=dict(size=u"2") ) if isinstance(col, float): font.text = f"{col:.2f}" else: font.text = str(col) trow = ET.SubElement( tbl, u"tr", attrib=dict(bgcolor=colors[u"empty"]) ) thead = ET.SubElement( trow, u"th", attrib=dict(align=u"left", colspan=u"6") ) thead.text = u"\t" trow = ET.SubElement(tbl, u"tr", attrib=dict(bgcolor=colors[u"empty"])) thead = ET.SubElement( trow, u"th", attrib=dict(align=u"left", colspan=u"6") ) font = ET.SubElement( thead, u"font", attrib=dict(size=u"12px", color=u"#ffffff") ) font.text = u"." return str(ET.tostring(tbl, encoding=u"unicode")) for suite in suites.values: html_table = str() for test_data in data.values: if test_data[u"parent"] not in suite[u"name"]: continue html_table += _generate_html_table(test_data) if not html_table: continue try: file_name = f"{table[u'output-file']}{suite[u'name']}.rst" with open(f"{file_name}", u'w') as html_file: logging.info(f" Writing file: {file_name}") html_file.write(u".. raw:: html\n\n\t") html_file.write(html_table) html_file.write(u"\n\t



\n") except KeyError: logging.warning(u"The output file is not defined.") return logging.info(u" Done.") def table_merged_details(table, input_data): """Generate the table(s) with algorithm: table_merged_details specified in the specification file. :param table: Table to generate. :param input_data: Data to process. :type table: pandas.Series :type input_data: InputData """ logging.info(f" Generating the table {table.get(u'title', u'')} ...") # Transform the data logging.info( f" Creating the data set for the {table.get(u'type', u'')} " f"{table.get(u'title', u'')}." ) data = input_data.filter_data(table, continue_on_error=True) data = input_data.merge_data(data) sort_tests = table.get(u"sort", None) if sort_tests: args = dict( inplace=True, ascending=(sort_tests == u"ascending") ) data.sort_index(**args) suites = input_data.filter_data( table, continue_on_error=True, data_set=u"suites") suites = input_data.merge_data(suites) # Prepare the header of the tables header = list() for column in table[u"columns"]: header.append( u'"{0}"'.format(str(column[u"title"]).replace(u'"', u'""')) ) for suite in suites.values: # Generate data suite_name = suite[u"name"] table_lst = list() for test in data.keys(): if data[test][u"parent"] not in suite_name: continue row_lst = list() for column in table[u"columns"]: try: col_data = str(data[test][column[ u"data"].split(u" ")[1]]).replace(u'"', u'""') # Do not include tests with "Test Failed" in test message if u"Test Failed" in col_data: continue col_data = col_data.replace( u"No Data", u"Not Captured " ) if column[u"data"].split(u" ")[1] in (u"name", ): if len(col_data) > 30: col_data_lst = col_data.split(u"-") half = int(len(col_data_lst) / 2) col_data = f"{u'-'.join(col_data_lst[:half])}" \ f"- |br| " \ f"{u'-'.join(col_data_lst[half:])}" col_data = f" |prein| {col_data} |preout| " elif column[u"data"].split(u" ")[1] in (u"msg", ): # Temporary solution: remove NDR results from message: if bool(table.get(u'remove-ndr', False)): try: col_data = col_data.split(u" |br| ", 1)[1] except IndexError: pass col_data = f" |prein| {col_data} |preout| " elif column[u"data"].split(u" ")[1] in \ (u"conf-history", u"show-run"): col_data = col_data.replace(u" |br| ", u"", 1) col_data = f" |prein| {col_data[:-5]} |preout| " row_lst.append(f'"{col_data}"') except KeyError: row_lst.append(u'"Not captured"') if len(row_lst) == len(table[u"columns"]): table_lst.append(row_lst) # Write the data to file if table_lst: separator = u"" if table[u'output-file'].endswith(u"/") else u"_" file_name = f"{table[u'output-file']}{separator}{suite_name}.csv" logging.info(f" Writing file: {file_name}") with open(file_name, u"wt") as file_handler: file_handler.write(u",".join(header) + u"\n") for item in table_lst: file_handler.write(u",".join(item) + u"\n") logging.info(u" Done.") def _tpc_modify_test_name(test_name, ignore_nic=False): """Modify a test name by replacing its parts. :param test_name: Test name to be modified. :param ignore_nic: If True, NIC is removed from TC name. :type test_name: str :type ignore_nic: bool :returns: Modified test name. :rtype: str """ test_name_mod = test_name.\ replace(u"-ndrpdrdisc", u""). \ replace(u"-ndrpdr", u"").\ replace(u"-pdrdisc", u""). \ replace(u"-ndrdisc", u"").\ replace(u"-pdr", u""). \ replace(u"-ndr", u""). \ replace(u"1t1c", u"1c").\ replace(u"2t1c", u"1c"). \ replace(u"2t2c", u"2c").\ replace(u"4t2c", u"2c"). \ replace(u"4t4c", u"4c").\ replace(u"8t4c", u"4c") if ignore_nic: return re.sub(REGEX_NIC, u"", test_name_mod) return test_name_mod def _tpc_modify_displayed_test_name(test_name): """Modify a test name which is displayed in a table by replacing its parts. :param test_name: Test name to be modified. :type test_name: str :returns: Modified test name. :rtype: str """ return test_name.\ replace(u"1t1c", u"1c").\ replace(u"2t1c", u"1c"). \ replace(u"2t2c", u"2c").\ replace(u"4t2c", u"2c"). \ replace(u"4t4c", u"4c").\ replace(u"8t4c", u"4c") def _tpc_insert_data(target, src, include_tests): """Insert src data to the target structure. :param target: Target structure where the data is placed. :param src: Source data to be placed into the target stucture. :param include_tests: Which results will be included (MRR, NDR, PDR). :type target: list :type src: dict :type include_tests: str """ try: if include_tests == u"MRR": target[u"mean"] = src[u"result"][u"receive-rate"] target[u"stdev"] = src[u"result"][u"receive-stdev"] elif include_tests == u"PDR": target[u"data"].append(src[u"throughput"][u"PDR"][u"LOWER"]) elif include_tests == u"NDR": target[u"data"].append(src[u"throughput"][u"NDR"][u"LOWER"]) except (KeyError, TypeError): pass def _tpc_generate_html_table(header, data, out_file_name, legend=u"", footnote=u"", sort_data=True, title=u"", generate_rst=True): """Generate html table from input data with simple sorting possibility. :param header: Table header. :param data: Input data to be included in the table. It is a list of lists. Inner lists are rows in the table. All inner lists must be of the same length. The length of these lists must be the same as the length of the header. :param out_file_name: The name (relative or full path) where the generated html table is written. :param legend: The legend to display below the table. :param footnote: The footnote to display below the table (and legend). :param sort_data: If True the data sorting is enabled. :param title: The table (and file) title. :param generate_rst: If True, wrapping rst file is generated. :type header: list :type data: list of lists :type out_file_name: str :type legend: str :type footnote: str :type sort_data: bool :type title: str :type generate_rst: bool """ try: idx = header.index(u"Test Case") except ValueError: idx = 0 params = { u"align-hdr": ( [u"left", u"right"], [u"left", u"left", u"right"], [u"left", u"left", u"left", u"right"] ), u"align-itm": ( [u"left", u"right"], [u"left", u"left", u"right"], [u"left", u"left", u"left", u"right"] ), u"width": ([15, 9], [4, 24, 10], [4, 4, 32, 10]) } df_data = pd.DataFrame(data, columns=header) if sort_data: df_sorted = [df_data.sort_values( by=[key, header[idx]], ascending=[True, True] if key != header[idx] else [False, True]) for key in header] df_sorted_rev = [df_data.sort_values( by=[key, header[idx]], ascending=[False, True] if key != header[idx] else [True, True]) for key in header] df_sorted.extend(df_sorted_rev) else: df_sorted = df_data fill_color = [[u"#d4e4f7" if idx % 2 else u"#e9f1fb" for idx in range(len(df_data))]] table_header = dict( values=[f"{item.replace(u',', u',
')}
" for item in header], fill_color=u"#7eade7", align=params[u"align-hdr"][idx], font=dict( family=u"Courier New", size=12 ) ) fig = go.Figure() if sort_data: for table in df_sorted: columns = [table.get(col) for col in header] fig.add_trace( go.Table( columnwidth=params[u"width"][idx], header=table_header, cells=dict( values=columns, fill_color=fill_color, align=params[u"align-itm"][idx], font=dict( family=u"Courier New", size=12 ) ) ) ) buttons = list() menu_items = [f"{itm} (ascending)" for itm in header] menu_items.extend([f"{itm} (descending)" for itm in header]) for idx, hdr in enumerate(menu_items): visible = [False, ] * len(menu_items) visible[idx] = True buttons.append( dict( label=hdr.replace(u" [Mpps]", u""), method=u"update", args=[{u"visible": visible}], ) ) fig.update_layout( updatemenus=[ go.layout.Updatemenu( type=u"dropdown", direction=u"down", x=0.0, xanchor=u"left", y=1.002, yanchor=u"bottom", active=len(menu_items) - 1, buttons=list(buttons) ) ], ) else: fig.add_trace( go.Table( columnwidth=params[u"width"][idx], header=table_header, cells=dict( values=[df_sorted.get(col) for col in header], fill_color=fill_color, align=params[u"align-itm"][idx], font=dict( family=u"Courier New", size=12 ) ) ) ) ploff.plot( fig, show_link=False, auto_open=False, filename=f"{out_file_name}_in.html" ) if not generate_rst: return file_name = out_file_name.split(u"/")[-1] if u"vpp" in out_file_name: path = u"_tmp/src/vpp_performance_tests/comparisons/" else: path = u"_tmp/src/dpdk_performance_tests/comparisons/" with open(f"{path}{file_name}.rst", u"wt") as rst_file: rst_file.write( u"\n" u".. |br| raw:: html\n\n
\n\n\n" u".. |prein| raw:: html\n\n
\n\n\n"
            u".. |preout| raw:: html\n\n    
\n\n" ) if title: rst_file.write(f"{title}\n") rst_file.write(f"{u'`' * len(title)}\n\n") rst_file.write( u".. raw:: html\n\n" f' \n\n' ) # TODO: Use html (rst) list for legend and footnote if legend: rst_file.write(legend[1:].replace(u"\n", u" |br| ")) if footnote: rst_file.write(footnote.replace(u"\n", u" |br| ")[1:]) def table_soak_vs_ndr(table, input_data): """Generate the table(s) with algorithm: table_soak_vs_ndr specified in the specification file. :param table: Table to generate. :param input_data: Data to process. :type table: pandas.Series :type input_data: InputData """ logging.info(f" Generating the table {table.get(u'title', u'')} ...") # Transform the data logging.info( f" Creating the data set for the {table.get(u'type', u'')} " f"{table.get(u'title', u'')}." ) data = input_data.filter_data(table, continue_on_error=True) # Prepare the header of the table try: header = [ u"Test Case", f"Avg({table[u'reference'][u'title']})", f"Stdev({table[u'reference'][u'title']})", f"Avg({table[u'compare'][u'title']})", f"Stdev{table[u'compare'][u'title']})", u"Diff", u"Stdev(Diff)" ] header_str = u";".join(header) + u"\n" legend = ( u"\nLegend:\n" f"Avg({table[u'reference'][u'title']}): " f"Mean value of {table[u'reference'][u'title']} [Mpps] computed " f"from a series of runs of the listed tests.\n" f"Stdev({table[u'reference'][u'title']}): " f"Standard deviation value of {table[u'reference'][u'title']} " f"[Mpps] computed from a series of runs of the listed tests.\n" f"Avg({table[u'compare'][u'title']}): " f"Mean value of {table[u'compare'][u'title']} [Mpps] computed from " f"a series of runs of the listed tests.\n" f"Stdev({table[u'compare'][u'title']}): " f"Standard deviation value of {table[u'compare'][u'title']} [Mpps] " f"computed from a series of runs of the listed tests.\n" f"Diff({table[u'reference'][u'title']}," f"{table[u'compare'][u'title']}): " f"Percentage change calculated for mean values.\n" u"Stdev(Diff): " u"Standard deviation of percentage change calculated for mean " u"values." ) except (AttributeError, KeyError) as err: logging.error(f"The model is invalid, missing parameter: {repr(err)}") return # Create a list of available SOAK test results: tbl_dict = dict() for job, builds in table[u"compare"][u"data"].items(): for build in builds: for tst_name, tst_data in data[job][str(build)].items(): if tst_data[u"type"] == u"SOAK": tst_name_mod = tst_name.replace(u"-soak", u"") if tbl_dict.get(tst_name_mod, None) is None: groups = re.search(REGEX_NIC, tst_data[u"parent"]) nic = groups.group(0) if groups else u"" name = ( f"{nic}-" f"{u'-'.join(tst_data[u'name'].split(u'-')[:-1])}" ) tbl_dict[tst_name_mod] = { u"name": name, u"ref-data": list(), u"cmp-data": list() } try: tbl_dict[tst_name_mod][u"cmp-data"].append( tst_data[u"throughput"][u"LOWER"]) except (KeyError, TypeError): pass tests_lst = tbl_dict.keys() # Add corresponding NDR test results: for job, builds in table[u"reference"][u"data"].items(): for build in builds: for tst_name, tst_data in data[job][str(build)].items(): tst_name_mod = tst_name.replace(u"-ndrpdr", u"").\ replace(u"-mrr", u"") if tst_name_mod not in tests_lst: continue try: if tst_data[u"type"] not in (u"NDRPDR", u"MRR", u"BMRR"): continue if table[u"include-tests"] == u"MRR": result = (tst_data[u"result"][u"receive-rate"], tst_data[u"result"][u"receive-stdev"]) elif table[u"include-tests"] == u"PDR": result = \ tst_data[u"throughput"][u"PDR"][u"LOWER"] elif table[u"include-tests"] == u"NDR": result = \ tst_data[u"throughput"][u"NDR"][u"LOWER"] else: result = None if result is not None: tbl_dict[tst_name_mod][u"ref-data"].append( result) except (KeyError, TypeError): continue tbl_lst = list() for tst_name in tbl_dict: item = [tbl_dict[tst_name][u"name"], ] data_r = tbl_dict[tst_name][u"ref-data"] if data_r: if table[u"include-tests"] == u"MRR": data_r_mean = data_r[0][0] data_r_stdev = data_r[0][1] else: data_r_mean = mean(data_r) data_r_stdev = stdev(data_r) item.append(round(data_r_mean / 1e6, 1)) item.append(round(data_r_stdev / 1e6, 1)) else: data_r_mean = None data_r_stdev = None item.extend([None, None]) data_c = tbl_dict[tst_name][u"cmp-data"] if data_c: if table[u"include-tests"] == u"MRR": data_c_mean = data_c[0][0] data_c_stdev = data_c[0][1] else: data_c_mean = mean(data_c) data_c_stdev = stdev(data_c) item.append(round(data_c_mean / 1e6, 1)) item.append(round(data_c_stdev / 1e6, 1)) else: data_c_mean = None data_c_stdev = None item.extend([None, None]) if data_r_mean is not None and data_c_mean is not None: delta, d_stdev = relative_change_stdev( data_r_mean, data_c_mean, data_r_stdev, data_c_stdev) try: item.append(round(delta)) except ValueError: item.append(delta) try: item.append(round(d_stdev)) except ValueError: item.append(d_stdev) tbl_lst.append(item) # Sort the table according to the relative change tbl_lst.sort(key=lambda rel: rel[-1], reverse=True) # Generate csv tables: csv_file = f"{table[u'output-file']}.csv" with open(csv_file, u"wt") as file_handler: file_handler.write(header_str) for test in tbl_lst: file_handler.write(u";".join([str(item) for item in test]) + u"\n") convert_csv_to_pretty_txt( csv_file, f"{table[u'output-file']}.txt", delimiter=u";" ) with open(f"{table[u'output-file']}.txt", u'a') as txt_file: txt_file.write(legend) # Generate html table: _tpc_generate_html_table( header, tbl_lst, table[u'output-file'], legend=legend, title=table.get(u"title", u"") ) def table_perf_trending_dash(table, input_data): """Generate the table(s) with algorithm: table_perf_trending_dash specified in the specification file. :param table: Table to generate. :param input_data: Data to process. :type table: pandas.Series :type input_data: InputData """ logging.info(f" Generating the table {table.get(u'title', u'')} ...") # Transform the data logging.info( f" Creating the data set for the {table.get(u'type', u'')} " f"{table.get(u'title', u'')}." ) data = input_data.filter_data(table, continue_on_error=True) # Prepare the header of the tables header = [ u"Test Case", u"Trend [Mpps]", u"Short-Term Change [%]", u"Long-Term Change [%]", u"Regressions [#]", u"Progressions [#]" ] header_str = u",".join(header) + u"\n" incl_tests = table.get(u"include-tests", u"MRR") # Prepare data to the table: tbl_dict = dict() for job, builds in table[u"data"].items(): for build in builds: for tst_name, tst_data in data[job][str(build)].items(): if tst_name.lower() in table.get(u"ignore-list", list()): continue if tbl_dict.get(tst_name, None) is None: groups = re.search(REGEX_NIC, tst_data[u"parent"]) if not groups: continue nic = groups.group(0) tbl_dict[tst_name] = { u"name": f"{nic}-{tst_data[u'name']}", u"data": OrderedDict() } try: if incl_tests == u"MRR": tbl_dict[tst_name][u"data"][str(build)] = \ tst_data[u"result"][u"receive-rate"] elif incl_tests == u"NDR": tbl_dict[tst_name][u"data"][str(build)] = \ tst_data[u"throughput"][u"NDR"][u"LOWER"] elif incl_tests == u"PDR": tbl_dict[tst_name][u"data"][str(build)] = \ tst_data[u"throughput"][u"PDR"][u"LOWER"] except (TypeError, KeyError): pass # No data in output.xml for this test tbl_lst = list() for tst_name in tbl_dict: data_t = tbl_dict[tst_name][u"data"] if len(data_t) < 2: continue classification_lst, avgs, _ = classify_anomalies(data_t) win_size = min(len(data_t), table[u"window"]) long_win_size = min(len(data_t), table[u"long-trend-window"]) try: max_long_avg = max( [x for x in avgs[-long_win_size:-win_size] if not isnan(x)]) except ValueError: max_long_avg = nan last_avg = avgs[-1] avg_week_ago = avgs[max(-win_size, -len(avgs))] if isnan(last_avg) or isnan(avg_week_ago) or avg_week_ago == 0.0: rel_change_last = nan else: rel_change_last = round( ((last_avg - avg_week_ago) / avg_week_ago) * 1e2, 2) if isnan(max_long_avg) or isnan(last_avg) or max_long_avg == 0.0: rel_change_long = nan else: rel_change_long = round( ((last_avg - max_long_avg) / max_long_avg) * 1e2, 2) if classification_lst: if isnan(rel_change_last) and isnan(rel_change_long): continue if isnan(last_avg) or isnan(rel_change_last) or \ isnan(rel_change_long): continue tbl_lst.append( [tbl_dict[tst_name][u"name"], round(last_avg / 1e6, 2), rel_change_last, rel_change_long, classification_lst[-win_size+1:].count(u"regression"), classification_lst[-win_size+1:].count(u"progression")]) tbl_lst.sort(key=lambda rel: rel[0]) tbl_sorted = list() for nrr in range(table[u"window"], -1, -1): tbl_reg = [item for item in tbl_lst if item[4] == nrr] for nrp in range(table[u"window"], -1, -1): tbl_out = [item for item in tbl_reg if item[5] == nrp] tbl_out.sort(key=lambda rel: rel[2]) tbl_sorted.extend(tbl_out) file_name = f"{table[u'output-file']}{table[u'output-file-ext']}" logging.info(f" Writing file: {file_name}") with open(file_name, u"wt") as file_handler: file_handler.write(header_str) for test in tbl_sorted: file_handler.write(u",".join([str(item) for item in test]) + u'\n') logging.info(f" Writing file: {table[u'output-file']}.txt") convert_csv_to_pretty_txt(file_name, f"{table[u'output-file']}.txt") def _generate_url(testbed, test_name): """Generate URL to a trending plot from the name of the test case. :param testbed: The testbed used for testing. :param test_name: The name of the test case. :type testbed: str :type test_name: str :returns: The URL to the plot with the trending data for the given test case. :rtype str """ if u"x520" in test_name: nic = u"x520" elif u"x710" in test_name: nic = u"x710" elif u"xl710" in test_name: nic = u"xl710" elif u"xxv710" in test_name: nic = u"xxv710" elif u"vic1227" in test_name: nic = u"vic1227" elif u"vic1385" in test_name: nic = u"vic1385" elif u"x553" in test_name: nic = u"x553" elif u"cx556" in test_name or u"cx556a" in test_name: nic = u"cx556a" else: nic = u"" if u"64b" in test_name: frame_size = u"64b" elif u"78b" in test_name: frame_size = u"78b" elif u"imix" in test_name: frame_size = u"imix" elif u"9000b" in test_name: frame_size = u"9000b" elif u"1518b" in test_name: frame_size = u"1518b" elif u"114b" in test_name: frame_size = u"114b" else: frame_size = u"" if u"1t1c" in test_name or \ (u"-1c-" in test_name and testbed in (u"3n-hsw", u"3n-tsh", u"2n-dnv", u"3n-dnv")): cores = u"1t1c" elif u"2t2c" in test_name or \ (u"-2c-" in test_name and testbed in (u"3n-hsw", u"3n-tsh", u"2n-dnv", u"3n-dnv")): cores = u"2t2c" elif u"4t4c" in test_name or \ (u"-4c-" in test_name and testbed in (u"3n-hsw", u"3n-tsh", u"2n-dnv", u"3n-dnv")): cores = u"4t4c" elif u"2t1c" in test_name or \ (u"-1c-" in test_name and testbed in (u"2n-skx", u"3n-skx", u"2n-clx")): cores = u"2t1c" elif u"4t2c" in test_name or \ (u"-2c-" in test_name and testbed in (u"2n-skx", u"3n-skx", u"2n-clx")): cores = u"4t2c" elif u"8t4c" in test_name or \ (u"-4c-" in test_name and testbed in (u"2n-skx", u"3n-skx", u"2n-clx")): cores = u"8t4c" else: cores = u"" if u"testpmd" in test_name: driver = u"testpmd" elif u"l3fwd" in test_name: driver = u"l3fwd" elif u"avf" in test_name: driver = u"avf" elif u"rdma" in test_name: driver = u"rdma" elif u"dnv" in testbed or u"tsh" in testbed: driver = u"ixgbe" else: driver = u"dpdk" if u"acl" in test_name or \ u"macip" in test_name or \ u"nat" in test_name or \ u"policer" in test_name or \ u"cop" in test_name: bsf = u"features" elif u"scale" in test_name: bsf = u"scale" elif u"base" in test_name: bsf = u"base" else: bsf = u"base" if u"114b" in test_name and u"vhost" in test_name: domain = u"vts" elif u"testpmd" in test_name or u"l3fwd" in test_name: domain = u"dpdk" elif u"memif" in test_name: domain = u"container_memif" elif u"srv6" in test_name: domain = u"srv6" elif u"vhost" in test_name: domain = u"vhost" if u"vppl2xc" in test_name: driver += u"-vpp" else: driver += u"-testpmd" if u"lbvpplacp" in test_name: bsf += u"-link-bonding" elif u"ch" in test_name and u"vh" in test_name and u"vm" in test_name: domain = u"nf_service_density_vnfc" elif u"ch" in test_name and u"mif" in test_name and u"dcr" in test_name: domain = u"nf_service_density_cnfc" elif u"pl" in test_name and u"mif" in test_name and u"dcr" in test_name: domain = u"nf_service_density_cnfp" elif u"ipsec" in test_name: domain = u"ipsec" if u"sw" in test_name: bsf += u"-sw" elif u"hw" in test_name: bsf += u"-hw" elif u"ethip4vxlan" in test_name: domain = u"ip4_tunnels" elif u"ip4base" in test_name or u"ip4scale" in test_name: domain = u"ip4" elif u"ip6base" in test_name or u"ip6scale" in test_name: domain = u"ip6" elif u"l2xcbase" in test_name or \ u"l2xcscale" in test_name or \ u"l2bdbasemaclrn" in test_name or \ u"l2bdscale" in test_name or \ u"l2patch" in test_name: domain = u"l2" else: domain = u"" file_name = u"-".join((domain, testbed, nic)) + u".html#" anchor_name = u"-".join((frame_size, cores, bsf, driver)) return file_name + anchor_name def table_perf_trending_dash_html(table, input_data): """Generate the table(s) with algorithm: table_perf_trending_dash_html specified in the specification file. :param table: Table to generate. :param input_data: Data to process. :type table: dict :type input_data: InputData """ _ = input_data if not table.get(u"testbed", None): logging.error( f"The testbed is not defined for the table " f"{table.get(u'title', u'')}." ) return logging.info(f" Generating the table {table.get(u'title', u'')} ...") try: with open(table[u"input-file"], u'rt') as csv_file: csv_lst = list(csv.reader(csv_file, delimiter=u',', quotechar=u'"')) except KeyError: logging.warning(u"The input file is not defined.") return except csv.Error as err: logging.warning( f"Not possible to process the file {table[u'input-file']}.\n" f"{repr(err)}" ) return # Table: dashboard = ET.Element(u"table", attrib=dict(width=u"100%", border=u'0')) # Table header: trow = ET.SubElement(dashboard, u"tr", attrib=dict(bgcolor=u"#7eade7")) for idx, item in enumerate(csv_lst[0]): alignment = u"left" if idx == 0 else u"center" thead = ET.SubElement(trow, u"th", attrib=dict(align=alignment)) thead.text = item # Rows: colors = { u"regression": ( u"#ffcccc", u"#ff9999" ), u"progression": ( u"#c6ecc6", u"#9fdf9f" ), u"normal": ( u"#e9f1fb", u"#d4e4f7" ) } for r_idx, row in enumerate(csv_lst[1:]): if int(row[4]): color = u"regression" elif int(row[5]): color = u"progression" else: color = u"normal" trow = ET.SubElement( dashboard, u"tr", attrib=dict(bgcolor=colors[color][r_idx % 2]) ) # Columns: for c_idx, item in enumerate(row): tdata = ET.SubElement( trow, u"td", attrib=dict(align=u"left" if c_idx == 0 else u"center") ) # Name: if c_idx == 0 and table.get(u"add-links", True): ref = ET.SubElement( tdata, u"a", attrib=dict( href=f"../trending/" f"{_generate_url(table.get(u'testbed', ''), item)}" ) ) ref.text = item else: tdata.text = item try: with open(table[u"output-file"], u'w') as html_file: logging.info(f" Writing file: {table[u'output-file']}") html_file.write(u".. raw:: html\n\n\t") html_file.write(str(ET.tostring(dashboard, encoding=u"unicode"))) html_file.write(u"\n\t



\n") except KeyError: logging.warning(u"The output file is not defined.") return def table_last_failed_tests(table, input_data): """Generate the table(s) with algorithm: table_last_failed_tests specified in the specification file. :param table: Table to generate. :param input_data: Data to process. :type table: pandas.Series :type input_data: InputData """ logging.info(f" Generating the table {table.get(u'title', u'')} ...") # Transform the data logging.info( f" Creating the data set for the {table.get(u'type', u'')} " f"{table.get(u'title', u'')}." ) data = input_data.filter_data(table, continue_on_error=True) if data is None or data.empty: logging.warning( f" No data for the {table.get(u'type', u'')} " f"{table.get(u'title', u'')}." ) return tbl_list = list() for job, builds in table[u"data"].items(): for build in builds: build = str(build) try: version = input_data.metadata(job, build).get(u"version", u"") except KeyError: logging.error(f"Data for {job}: {build} is not present.") return tbl_list.append(build) tbl_list.append(version) failed_tests = list() passed = 0 failed = 0 for tst_data in data[job][build].values: if tst_data[u"status"] != u"FAIL": passed += 1 continue failed += 1 groups = re.search(REGEX_NIC, tst_data[u"parent"]) if not groups: continue nic = groups.group(0) failed_tests.append(f"{nic}-{tst_data[u'name']}") tbl_list.append(str(passed)) tbl_list.append(str(failed)) tbl_list.extend(failed_tests) file_name = f"{table[u'output-file']}{table[u'output-file-ext']}" logging.info(f" Writing file: {file_name}") with open(file_name, u"wt") as file_handler: for test in tbl_list: file_handler.write(test + u'\n') def table_failed_tests(table, input_data): """Generate the table(s) with algorithm: table_failed_tests specified in the specification file. :param table: Table to generate. :param input_data: Data to process. :type table: pandas.Series :type input_data: InputData """ logging.info(f" Generating the table {table.get(u'title', u'')} ...") # Transform the data logging.info( f" Creating the data set for the {table.get(u'type', u'')} " f"{table.get(u'title', u'')}." ) data = input_data.filter_data(table, continue_on_error=True) test_type = u"MRR" if u"NDRPDR" in table.get(u"filter", list()): test_type = u"NDRPDR" # Prepare the header of the tables header = [ u"Test Case", u"Failures [#]", u"Last Failure [Time]", u"Last Failure [VPP-Build-Id]", u"Last Failure [CSIT-Job-Build-Id]" ] # Generate the data for the table according to the model in the table # specification now = dt.utcnow() timeperiod = timedelta(int(table.get(u"window", 7))) tbl_dict = dict() for job, builds in table[u"data"].items(): for build in builds: build = str(build) for tst_name, tst_data in data[job][build].items(): if tst_name.lower() in table.get(u"ignore-list", list()): continue if tbl_dict.get(tst_name, None) is None: groups = re.search(REGEX_NIC, tst_data[u"parent"]) if not groups: continue nic = groups.group(0) tbl_dict[tst_name] = { u"name": f"{nic}-{tst_data[u'name']}", u"data": OrderedDict() } try: generated = input_data.metadata(job, build).\ get(u"generated", u"") if not generated: continue then = dt.strptime(generated, u"%Y%m%d %H:%M") if (now - then) <= timeperiod: tbl_dict[tst_name][u"data"][build] = ( tst_data[u"status"], generated, input_data.metadata(job, build).get(u"version", u""), build ) except (TypeError, KeyError) as err: logging.warning(f"tst_name: {tst_name} - err: {repr(err)}") max_fails = 0 tbl_lst = list() for tst_data in tbl_dict.values(): fails_nr = 0 fails_last_date = u"" fails_last_vpp = u"" fails_last_csit = u"" for val in tst_data[u"data"].values(): if val[0] == u"FAIL": fails_nr += 1 fails_last_date = val[1] fails_last_vpp = val[2] fails_last_csit = val[3] if fails_nr: max_fails = fails_nr if fails_nr > max_fails else max_fails tbl_lst.append([ tst_data[u"name"], fails_nr, fails_last_date, fails_last_vpp, f"{u'mrr-daily' if test_type == u'MRR' else u'ndrpdr-weekly'}" f"-build-{fails_last_csit}" ]) tbl_lst.sort(key=lambda rel: rel[2], reverse=True) tbl_sorted = list() for nrf in range(max_fails, -1, -1): tbl_fails = [item for item in tbl_lst if item[1] == nrf] tbl_sorted.extend(tbl_fails) file_name = f"{table[u'output-file']}{table[u'output-file-ext']}" logging.info(f" Writing file: {file_name}") with open(file_name, u"wt") as file_handler: file_handler.write(u",".join(header) + u"\n") for test in tbl_sorted: file_handler.write(u",".join([str(item) for item in test]) + u'\n') logging.info(f" Writing file: {table[u'output-file']}.txt") convert_csv_to_pretty_txt(file_name, f"{table[u'output-file']}.txt") def table_failed_tests_html(table, input_data): """Generate the table(s) with algorithm: table_failed_tests_html specified in the specification file. :param table: Table to generate. :param input_data: Data to process. :type table: pandas.Series :type input_data: InputData """ _ = input_data if not table.get(u"testbed", None): logging.error( f"The testbed is not defined for the table " f"{table.get(u'title', u'')}." ) return logging.info(f" Generating the table {table.get(u'title', u'')} ...") try: with open(table[u"input-file"], u'rt') as csv_file: csv_lst = list(csv.reader(csv_file, delimiter=u',', quotechar=u'"')) except KeyError: logging.warning(u"The input file is not defined.") return except csv.Error as err: logging.warning( f"Not possible to process the file {table[u'input-file']}.\n" f"{repr(err)}" ) return # Table: failed_tests = ET.Element(u"table", attrib=dict(width=u"100%", border=u'0')) # Table header: trow = ET.SubElement(failed_tests, u"tr", attrib=dict(bgcolor=u"#7eade7")) for idx, item in enumerate(csv_lst[0]): alignment = u"left" if idx == 0 else u"center" thead = ET.SubElement(trow, u"th", attrib=dict(align=alignment)) thead.text = item # Rows: colors = (u"#e9f1fb", u"#d4e4f7") for r_idx, row in enumerate(csv_lst[1:]): background = colors[r_idx % 2] trow = ET.SubElement( failed_tests, u"tr", attrib=dict(bgcolor=background) ) # Columns: for c_idx, item in enumerate(row): tdata = ET.SubElement( trow, u"td", attrib=dict(align=u"left" if c_idx == 0 else u"center") ) # Name: if c_idx == 0: ref = ET.SubElement( tdata, u"a", attrib=dict( href=f"../trending/" f"{_generate_url(table.get(u'testbed', ''), item)}" ) ) ref.text = item else: tdata.text = item try: with open(table[u"output-file"], u'w') as html_file: logging.info(f" Writing file: {table[u'output-file']}") html_file.write(u".. raw:: html\n\n\t") html_file.write(str(ET.tostring(failed_tests, encoding=u"unicode"))) html_file.write(u"\n\t



\n") except KeyError: logging.warning(u"The output file is not defined.") return def table_comparison(table, input_data): """Generate the table(s) with algorithm: table_comparison specified in the specification file. :param table: Table to generate. :param input_data: Data to process. :type table: pandas.Series :type input_data: InputData """ logging.info(f" Generating the table {table.get(u'title', u'')} ...") # Transform the data logging.info( f" Creating the data set for the {table.get(u'type', u'')} " f"{table.get(u'title', u'')}." ) columns = table.get(u"columns", None) if not columns: logging.error( f"No columns specified for {table.get(u'title', u'')}. Skipping." ) return cols = list() for idx, col in enumerate(columns): if col.get(u"data-set", None) is None: logging.warning(f"No data for column {col.get(u'title', u'')}") continue tag = col.get(u"tag", None) data = input_data.filter_data( table, params=[u"throughput", u"result", u"name", u"parent", u"tags"], data=col[u"data-set"], continue_on_error=True ) col_data = { u"title": col.get(u"title", f"Column{idx}"), u"data": dict() } for builds in data.values: for build in builds: for tst_name, tst_data in build.items(): if tag and tag not in tst_data[u"tags"]: continue tst_name_mod = \ _tpc_modify_test_name(tst_name, ignore_nic=True).\ replace(u"2n1l-", u"") if col_data[u"data"].get(tst_name_mod, None) is None: name = tst_data[u'name'].rsplit(u'-', 1)[0] if u"across testbeds" in table[u"title"].lower() or \ u"across topologies" in table[u"title"].lower(): name = _tpc_modify_displayed_test_name(name) col_data[u"data"][tst_name_mod] = { u"name": name, u"replace": True, u"data": list(), u"mean": None, u"stdev": None } _tpc_insert_data( target=col_data[u"data"][tst_name_mod], src=tst_data, include_tests=table[u"include-tests"] ) replacement = col.get(u"data-replacement", None) if replacement: rpl_data = input_data.filter_data( table, params=[u"throughput", u"result", u"name", u"parent", u"tags"], data=replacement, continue_on_error=True ) for builds in rpl_data.values: for build in builds: for tst_name, tst_data in build.items(): if tag and tag not in tst_data[u"tags"]: continue tst_name_mod = \ _tpc_modify_test_name(tst_name, ignore_nic=True).\ replace(u"2n1l-", u"") if col_data[u"data"].get(tst_name_mod, None) is None: name = tst_data[u'name'].rsplit(u'-', 1)[0] if u"across testbeds" in table[u"title"].lower() \ or u"across topologies" in \ table[u"title"].lower(): name = _tpc_modify_displayed_test_name(name) col_data[u"data"][tst_name_mod] = { u"name": name, u"replace": False, u"data": list(), u"mean": None, u"stdev": None } if col_data[u"data"][tst_name_mod][u"replace"]: col_data[u"data"][tst_name_mod][u"replace"] = False col_data[u"data"][tst_name_mod][u"data"] = list() _tpc_insert_data( target=col_data[u"data"][tst_name_mod], src=tst_data, include_tests=table[u"include-tests"] ) if table[u"include-tests"] in (u"NDR", u"PDR"): for tst_name, tst_data in col_data[u"data"].items(): if tst_data[u"data"]: tst_data[u"mean"] = mean(tst_data[u"data"]) tst_data[u"stdev"] = stdev(tst_data[u"data"]) cols.append(col_data) tbl_dict = dict() for col in cols: for tst_name, tst_data in col[u"data"].items(): if tbl_dict.get(tst_name, None) is None: tbl_dict[tst_name] = { "name": tst_data[u"name"] } tbl_dict[tst_name][col[u"title"]] = { u"mean": tst_data[u"mean"], u"stdev": tst_data[u"stdev"] } if not tbl_dict: logging.warning(f"No data for table {table.get(u'title', u'')}!") return tbl_lst = list() for tst_data in tbl_dict.values(): row = [tst_data[u"name"], ] for col in cols: row.append(tst_data.get(col[u"title"], None)) tbl_lst.append(row) comparisons = table.get(u"comparisons", None) if comparisons and isinstance(comparisons, list): for idx, comp in enumerate(comparisons): try: col_ref = int(comp[u"reference"]) col_cmp = int(comp[u"compare"]) except KeyError: logging.warning(u"Comparison: No references defined! Skipping.") comparisons.pop(idx) continue if not (0 < col_ref <= len(cols) and 0 < col_cmp <= len(cols)) or \ col_ref == col_cmp: logging.warning(f"Wrong values of reference={col_ref} " f"and/or compare={col_cmp}. Skipping.") comparisons.pop(idx) continue tbl_cmp_lst = list() if comparisons: for row in tbl_lst: new_row = deepcopy(row) add_to_tbl = False for comp in comparisons: ref_itm = row[int(comp[u"reference"])] if ref_itm is None and \ comp.get(u"reference-alt", None) is not None: ref_itm = row[int(comp[u"reference-alt"])] cmp_itm = row[int(comp[u"compare"])] if ref_itm is not None and cmp_itm is not None and \ ref_itm[u"mean"] is not None and \ cmp_itm[u"mean"] is not None and \ ref_itm[u"stdev"] is not None and \ cmp_itm[u"stdev"] is not None: delta, d_stdev = relative_change_stdev( ref_itm[u"mean"], cmp_itm[u"mean"], ref_itm[u"stdev"], cmp_itm[u"stdev"] ) new_row.append( { u"mean": delta * 1e6, u"stdev": d_stdev * 1e6 } ) add_to_tbl = True else: new_row.append(None) if add_to_tbl: tbl_cmp_lst.append(new_row) tbl_cmp_lst.sort(key=lambda rel: rel[0], reverse=False) tbl_cmp_lst.sort(key=lambda rel: rel[-1][u'mean'], reverse=True) rcas = list() rca_in = table.get(u"rca", None) if rca_in and isinstance(rca_in, list): for idx, itm in enumerate(rca_in): try: with open(itm.get(u"data", u""), u"r") as rca_file: rcas.append( { u"title": itm.get(u"title", f"RCA{idx}"), u"data": load(rca_file, Loader=FullLoader) } ) except (YAMLError, IOError) as err: logging.warning( f"The RCA file {itm.get(u'data', u'')} does not exist or " f"it is corrupted!" ) logging.debug(repr(err)) tbl_for_csv = list() for line in tbl_cmp_lst: row = [line[0], ] for idx, itm in enumerate(line[1:]): if itm is None: row.append(u"NT") row.append(u"NT") else: row.append(round(float(itm[u'mean']) / 1e6, 3)) row.append(round(float(itm[u'stdev']) / 1e6, 3)) for rca in rcas: rca_nr = rca[u"data"].get(row[0], u"-") row.append(f"[{rca_nr}]" if rca_nr != u"-" else u"-") tbl_for_csv.append(row) header_csv = [u"Test Case", ] for col in cols: header_csv.append(f"Avg({col[u'title']})") header_csv.append(f"Stdev({col[u'title']})") for comp in comparisons: header_csv.append( f"Avg({comp.get(u'title', u'')})" ) header_csv.append( f"Stdev({comp.get(u'title', u'')})" ) header_csv.extend([rca[u"title"] for rca in rcas]) legend_lst = table.get(u"legend", None) if legend_lst is None: legend = u"" else: legend = u"\n" + u"\n".join(legend_lst) + u"\n" footnote = u"" for rca in rcas: footnote += f"\n{rca[u'title']}:\n" footnote += rca[u"data"].get(u"footnote", u"") csv_file = f"{table[u'output-file']}-csv.csv" with open(csv_file, u"wt", encoding='utf-8') as file_handler: file_handler.write( u",".join([f'"{itm}"' for itm in header_csv]) + u"\n" ) for test in tbl_for_csv: file_handler.write( u",".join([f'"{item}"' for item in test]) + u"\n" ) if legend_lst: for item in legend_lst: file_handler.write(f'"{item}"\n') if footnote: for itm in footnote.split(u"\n"): file_handler.write(f'"{itm}"\n') tbl_tmp = list() max_lens = [0, ] * len(tbl_cmp_lst[0]) for line in tbl_cmp_lst: row = [line[0], ] for idx, itm in enumerate(line[1:]): if itm is None: new_itm = u"NT" else: if idx < len(cols): new_itm = ( f"{round(float(itm[u'mean']) / 1e6, 1)} " f"\u00B1{round(float(itm[u'stdev']) / 1e6, 1)}". replace(u"nan", u"NaN") ) else: new_itm = ( f"{round(float(itm[u'mean']) / 1e6, 1):+} " f"\u00B1{round(float(itm[u'stdev']) / 1e6, 1)}". replace(u"nan", u"NaN") ) if len(new_itm.rsplit(u" ", 1)[-1]) > max_lens[idx]: max_lens[idx] = len(new_itm.rsplit(u" ", 1)[-1]) row.append(new_itm) tbl_tmp.append(row) tbl_final = list() for line in tbl_tmp: row = [line[0], ] for idx, itm in enumerate(line[1:]): if itm in (u"NT", u"NaN"): row.append(itm) continue itm_lst = itm.rsplit(u"\u00B1", 1) itm_lst[-1] = \ f"{u' ' * (max_lens[idx] - len(itm_lst[-1]))}{itm_lst[-1]}" row.append(u"\u00B1".join(itm_lst)) for rca in rcas: rca_nr = rca[u"data"].get(row[0], u"-") row.append(f"[{rca_nr}]" if rca_nr != u"-" else u"-") tbl_final.append(row) header = [u"Test Case", ] header.extend([col[u"title"] for col in cols]) header.extend([comp.get(u"title", u"") for comp in comparisons]) header.extend([rca[u"title"] for rca in rcas]) # Generate csv tables: csv_file = f"{table[u'output-file']}.csv" with open(csv_file, u"wt", encoding='utf-8') as file_handler: file_handler.write(u";".join(header) + u"\n") for test in tbl_final: file_handler.write(u";".join([str(item) for item in test]) + u"\n") # Generate txt table: txt_file_name = f"{table[u'output-file']}.txt" convert_csv_to_pretty_txt(csv_file, txt_file_name, delimiter=u";") with open(txt_file_name, u'a', encoding='utf-8') as txt_file: txt_file.write(legend) txt_file.write(footnote) # Generate html table: _tpc_generate_html_table( header, tbl_final, table[u'output-file'], legend=legend, footnote=footnote, sort_data=False, title=table.get(u"title", u"") ) def table_weekly_comparison(table, in_data): """Generate the table(s) with algorithm: table_weekly_comparison specified in the specification file. :param table: Table to generate. :param in_data: Data to process. :type table: pandas.Series :type in_data: InputData """ logging.info(f" Generating the table {table.get(u'title', u'')} ...") # Transform the data logging.info( f" Creating the data set for the {table.get(u'type', u'')} " f"{table.get(u'title', u'')}." ) incl_tests = table.get(u"include-tests", None) if incl_tests not in (u"NDR", u"PDR"): logging.error(f"Wrong tests to include specified ({incl_tests}).") return nr_cols = table.get(u"nr-of-data-columns", None) if not nr_cols or nr_cols < 2: logging.error( f"No columns specified for {table.get(u'title', u'')}. Skipping." ) return data = in_data.filter_data( table, params=[u"throughput", u"result", u"name", u"parent", u"tags"], continue_on_error=True ) header = [ [u"VPP Version", ], [u"Start Timestamp", ], [u"CSIT Build", ], [u"CSIT Testbed", ] ] tbl_dict = dict() idx = 0 tb_tbl = table.get(u"testbeds", None) for job_name, job_data in data.items(): for build_nr, build in job_data.items(): if idx >= nr_cols: break if build.empty: continue tb_ip = in_data.metadata(job_name, build_nr).get(u"testbed", u"") if tb_ip and tb_tbl: testbed = tb_tbl.get(tb_ip, u"") else: testbed = u"" header[2].insert(1, build_nr) header[3].insert(1, testbed) header[1].insert( 1, in_data.metadata(job_name, build_nr).get(u"generated", u"") ) header[0].insert( 1, in_data.metadata(job_name, build_nr).get(u"version", u"") ) for tst_name, tst_data in build.items(): tst_name_mod = \ _tpc_modify_test_name(tst_name).replace(u"2n1l-", u"") if not tbl_dict.get(tst_name_mod, None): tbl_dict[tst_name_mod] = dict( name=tst_data[u'name'].rsplit(u'-', 1)[0], ) try: tbl_dict[tst_name_mod][-idx - 1] = \ tst_data[u"throughput"][incl_tests][u"LOWER"] except (TypeError, IndexError, KeyError, ValueError): pass idx += 1 if idx < nr_cols: logging.error(u"Not enough data to build the table! Skipping") return cmp_dict = dict() for idx, cmp in enumerate(table.get(u"comparisons", list())): idx_ref = cmp.get(u"reference", None) idx_cmp = cmp.get(u"compare", None) if idx_ref is None or idx_cmp is None: continue header[0].append( f"Diff({header[0][idx_ref - idx].split(u'~')[-1]} vs " f"{header[0][idx_cmp - idx].split(u'~')[-1]})" ) header[1].append(u"") header[2].append(u"") header[3].append(u"") for tst_name, tst_data in tbl_dict.items(): if not cmp_dict.get(tst_name, None): cmp_dict[tst_name] = list() ref_data = tst_data.get(idx_ref, None) cmp_data = tst_data.get(idx_cmp, None) if ref_data is None or cmp_data is None: cmp_dict[tst_name].append(float('nan')) else: cmp_dict[tst_name].append( relative_change(ref_data, cmp_data) ) tbl_lst = list() for tst_name, tst_data in tbl_dict.items(): itm_lst = [tst_data[u"name"], ] for idx in range(nr_cols): item = tst_data.get(-idx - 1, None) if item is None: itm_lst.insert(1, None) else: itm_lst.insert(1, round(item / 1e6, 1)) itm_lst.extend( [ None if itm is None else round(itm, 1) for itm in cmp_dict[tst_name] ] ) tbl_lst.append(itm_lst) tbl_lst.sort(key=lambda rel: rel[0], reverse=False) tbl_lst.sort(key=lambda rel: rel[-1], reverse=True) # Generate csv table: csv_file = f"{table[u'output-file']}.csv" with open(csv_file, u"wt", encoding='utf-8') as file_handler: for hdr in header: file_handler.write(u",".join(hdr) + u"\n") for test in tbl_lst: file_handler.write(u",".join( [ str(item).replace(u"None", u"-").replace(u"nan", u"-"). replace(u"null", u"-") for item in test ] ) + u"\n") txt_file = f"{table[u'output-file']}.txt" convert_csv_to_pretty_txt(csv_file, txt_file, delimiter=u",") # Reorganize header in txt table txt_table = list() with open(txt_file, u"rt", encoding='utf-8') as file_handler: for line in file_handler: txt_table.append(line) try: txt_table.insert(5, txt_table.pop(2)) with open(txt_file, u"wt", encoding='utf-8') as file_handler: file_handler.writelines(txt_table) except IndexError: pass # Generate html table: hdr_html = [ u"
".join(row) for row in zip(*header) ] _tpc_generate_html_table( hdr_html, tbl_lst, table[u'output-file'], sort_data=True, title=table.get(u"title", u""), generate_rst=False )