# Copyright (c) 2016 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. *** Variables *** | &{if_settings}= | enabled=True # Bridge domain settings | ${bd_name}= | bd1 | &{bd_settings}= | flood=${True} | forward=${True} | learn=${True} | ... | unknown-unicast-flood=${True} | arp-termination=${False} | &{bd_if_settings}= | split_horizon_group=${0} | bvi=${False} # Names for AC lists | ${acl_name_macip}= | macip | ${acl_name_l3_ip4}= | acl_l3_ip4 | ${acl_name_l3_ip6}= | acl_l3_ip6 | ${acl_name_l4}= | acl_l4 | ${acl_name_mixed}= | acl_mixed | ${acl_name_icmp}= | acl_icmp | ${acl_name_icmpv6}= | acl_icmpv6 | ${acl_name_reflex}= | acl_reflex *** Settings *** | Resource | resources/libraries/robot/default.robot | Resource | resources/libraries/robot/honeycomb/honeycomb.robot | Resource | resources/libraries/robot/honeycomb/interfaces.robot | Resource | resources/libraries/robot/honeycomb/bridge_domain.robot | Resource | resources/libraries/robot/honeycomb/access_control_lists.robot | Resource | resources/libraries/robot/testing_path.robot | Resource | resources/libraries/robot/traffic.robot | Library | resources.libraries.python.honeycomb.HcAPIKwACL.ACLKeywords | Library | resources.libraries.python.Trace | Library | resources.libraries.python.IPv4Setup | Library | resources.libraries.python.IPv4Util | Library | resources.libraries.python.IPv6Util | Library | resources.libraries.python.Routing | Test Setup | Clear Packet Trace on All DUTs | ${nodes} | Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes} | ... | AND | Read plugin-ACL configuration from VAT | ${node} | ... | AND | Clear plugin-acl settings | ${node} | ${dut_to_tg_if1} | Suite Setup | Vpp All ra suppress link layer | ${nodes} | Suite Teardown | ... | Restart Honeycomb and VPP | ${node} | Documentation | *Honeycomb access control lists test suite for ACL plugin.* | Force Tags | honeycomb_sanity | honeycomb_odl *** Test Cases *** | TC01: ACL MAC filtering through plugin-acl node - bridged | | [Documentation] | | ... | [Top] TG=DUT1=TG. | | ... | [Enc] Eth-IPv4-TCP. | | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ | | ... | and configure L2 MAC ACL on ingress interface. | | ... | [Ver] Send simple TCP packets from one TG interface to the other,\ | | ... | using different MACs. Receive all packets except those with\ | | ... | MACs in the filtered ranges. | | [Teardown] | Run Keywords | | ... | Show Packet Trace on All DUTs | ${nodes} | AND | | ... | Clear plugin-acl Settings | ${node} | ${dut_to_tg_if1} | AND | | ... | Honeycomb Removes All Bridge Domains | | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} | | Given Setup Interfaces And Bridge Domain For plugin-acl Test | | ... | macip | ${acl_name_macip} | | When Honeycomb Creates ACL Chain Through ACL plugin | | ... | ${dut_node} | ${acl_name_macip} | ${acl_settings} | macip=${True} | | And Honeycomb Assigns plugin-acl Chain To Interface | | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_macip} | | ... | ingress | macip=${True} | | When Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | TCP | ${src_port} | ${dst_port} | | And Run Keyword And Expect Error | TCP/UDP Rx timeout | | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${classify_src} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | TCP | ${src_port} | ${dst_port} | | And Run Keyword And Expect Error | TCP/UDP Rx timeout | | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${classify_src2} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | TCP | ${src_port} | ${dst_port} | TC02: ACL IPv4 filtering through plugin-acl node - bridged | | [Documentation] | | ... | [Top] TG=DUT1=TG. | | ... | [Enc] Eth-IPv4-TCP. | | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ | | ... | and configure L3 IPv4 ACL on ingress interface with src/dst IP | | ... | and protocol number. | | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ | | ... | to the other, using different IPv4 IPs. Receive all packets except\ | | ... | those with IPs in the filtered ranges and UDP protocol payload. | | [Teardown] | Run Keywords | | ... | Show Packet Trace on All DUTs | ${nodes} | AND | | ... | Read plugin-ACL configuration from VAT | ${node} | AND | | ... | Clear plugin-acl Settings | ${node} | ${dut_to_tg_if1} | AND | | ... | Honeycomb Removes All Bridge Domains | | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} | | Given Setup Interfaces And Bridge Domain For plugin-acl Test | | ... | l3_ip4 | ${acl_name_l3_ip4} | | When Honeycomb Creates ACL Chain Through ACL plugin | | ... | ${dut_node} | ${acl_name_l3_ip4} | ${acl_settings} | | And Honeycomb Assigns plugin-acl Chain To Interface | | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l3_ip4} | ingress | | Then Send TCP Or UDP Packet | ${tg_node} | | ... | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | UDP | ${src_port} | ${dst_port} | | And Send TCP Or UDP Packet | ${tg_node} | | ... | ${classify_src} | ${classify_dst} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | TCP | ${src_port} | ${dst_port} | | And Run Keyword And Expect Error | TCP/UDP Rx timeout | | ... | Send TCP Or UDP Packet | ${tg_node} | | ... | ${classify_src} | ${classify_dst} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | UDP | ${src_port} | ${dst_port} | TC03: ACL IPv6 filtering through plugin-acl node - bridged | | [Documentation] | | ... | [Top] TG=DUT1=TG. | | ... | [Enc] Eth-IPv6-TCP. | | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ | | ... | and configure L3 IPv6 ACL on ingress interface with src/dst IP | | ... | and protocol number. | | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ | | ... | to the other, using different IPv6 IPs. Receive all packets except\ | | ... | those with IPs in the filtered ranges and UDP protocol payload. | | [Teardown] | Run Keywords | | ... | Show Packet Trace on All DUTs | ${nodes} | AND | | ... | Read plugin-ACL configuration from VAT | ${node} | AND | | ... | Clear plugin-acl Settings | ${node} | ${dut_to_tg_if1} | AND | | ... | Honeycomb Removes All Bridge Domains | | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} | | Given Setup interfaces and bridge domain for plugin-acl test | | ... | l3_ip6 | ${acl_name_l3_ip6} | | When Honeycomb Creates ACL Chain Through ACL plugin | | ... | ${dut_node} | ${acl_name_l3_ip6} | ${acl_settings} | | And Honeycomb Assigns plugin-acl Chain To Interface | | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l3_ip6} | ingress | | Then Send TCP Or UDP Packet | ${tg_node} | | ... | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | UDP | ${src_port} | ${dst_port} | | And Send TCP Or UDP Packet | ${tg_node} | | ... | ${classify_src} | ${classify_dst} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | TCP | ${src_port} | ${dst_port} | | And Run Keyword And Expect Error | TCP/UDP Rx timeout | | ... | Send TCP Or UDP Packet | ${tg_node} | | ... | ${classify_src} | ${classify_dst} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | UDP | ${src_port} | ${dst_port} | TC04: ACL port filtering through plugin-acl node - bridged | | [Documentation] | | ... | [Top] TG=DUT1=TG. | | ... | [Enc] Eth-IPv4-TCP. | | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ | | ... | and and configure L4 port ACL on ingress interface | | ... | with src/dst port ranges. | | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ | | ... | to the other, using different ports. Receive all packets except\ | | ... | those with ports in the filtered ranges. | | [Teardown] | Run Keywords | | ... | Show Packet Trace on All DUTs | ${nodes} | AND | | ... | Read plugin-ACL configuration from VAT | ${node} | AND | | ... | Clear plugin-acl Settings | ${node} | ${dut_to_tg_if1} | AND | | ... | Honeycomb Removes All Bridge Domains | | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} | | Given Setup interfaces and bridge domain for plugin-acl test | | ... | L4 | ${acl_name_l4} | | When Honeycomb Creates ACL Chain Through ACL plugin | | ... | ${dut_node} | ${acl_name_l4} | ${acl_settings} | | And Honeycomb Assigns plugin-acl Chain To Interface | | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l4} | ingress | | Then Send TCP Or UDP Packet | ${tg_node} | | ... | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | TCP | ${src_port} | ${dst_port} | | And Run Keyword And Expect Error | TCP/UDP Rx timeout | | ... | Send TCP Or UDP Packet | ${tg_node} | | ... | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | TCP | ${classify_src} | ${classify_dst} | | And Run Keyword And Expect Error | TCP/UDP Rx timeout | | ... | Send TCP Or UDP Packet | ${tg_node} | | ... | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | TCP | ${classify_src+5} | ${classify_dst+5} | TC05: ACL filtering with IPv4 address and TCP port in one rule - bridged | | [Documentation] | | ... | [Top] TG=DUT1=TG. | | ... | [Enc] Eth-IPv4-TCP. | | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ | | ... | and configure a mixed rule with src/dst IP, TCP protocol | | ... | and port ranges. | | ... | [Ver] Send simple TCP packets from one TG interface to the other,\ | | ... | using IPs and ports. Receive all packets except those with\ | | ... | both IPs and ports in the filtered ranges. | | [Teardown] | Run Keywords | | ... | Show Packet Trace on All DUTs | ${nodes} | AND | | ... | Read plugin-ACL configuration from VAT | ${node} | AND | | ... | Clear plugin-acl Settings | ${node} | ${dut_to_tg_if1} | AND | | ... | Honeycomb Removes All Bridge Domains | | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} | | Given Setup Interfaces And Bridge Domain For plugin-acl Test | | ... | mixed | ${acl_name_mixed} | | When Honeycomb Creates ACL Chain Through ACL plugin | | ... | ${dut_node} | ${acl_name_mixed} | ${acl_settings} | | And Honeycomb Assigns plugin-acl Chain To Interface | | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_mixed} | ingress | | Then Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | TCP | ${src_port} | ${dst_port} | | Then Send TCP Or UDP Packet | ${tg_node} | | ... | ${classify_src_ip} | ${classify_dst_ip} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | TCP | ${src_port} | ${dst_port} | | And Run Keyword And Expect Error | TCP/UDP Rx timeout | | ... | Send TCP Or UDP Packet | ${tg_node} | | ... | ${classify_src_ip} | ${classify_dst_ip} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | TCP | ${classify_src_port} | ${classify_dst_port} | TC06: ACL ICMP packet filtering - bridged | | [Documentation] | | ... | [Top] TG=DUT1=TG. | | ... | [Enc] Eth-IPv4-ICMP. | | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ | | ... | and configure a ICMP protocol filtering by ICMP type and code. | | ... | [Ver] Send ICMP packets from one TG interface\ | | ... | to the other, using different codes and types. Receive all packets\ | | ... | except those with types and codes in the filtered ranges. | | [Tags] | EXPECTED_FAILING # Bug VPP-624, ICMP type/code values are not matched | | [Teardown] | Run Keywords | | ... | Show Packet Trace on All DUTs | ${nodes} | AND | | ... | Read plugin-ACL configuration from VAT | ${node} | AND | | ... | Clear plugin-acl Settings | ${node} | ${dut_to_tg_if1} | AND | | ... | Honeycomb Removes All Bridge Domains | | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} | | Given Setup interfaces and bridge domain for plugin-acl test | | ... | icmp | ${acl_name_icmp} | | When Honeycomb Creates ACL Chain Through ACL plugin | | ... | ${dut_node} | ${acl_name_icmp} | ${acl_settings} | | And Honeycomb Assigns plugin-acl Chain To Interface | | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_icmp} | ingress | | Then Send ICMP packet with type and code | ${tg_node} | | ... | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | ${icmp_type} | ${icmp_code} | | Then Send ICMP packet with type and code | ${tg_node} | | ... | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | ${classify_type} | ${icmp_code} | | And Run Keyword And Expect Error | ICMP echo Rx timeout | | ... | Send ICMP packet with type and code | ${tg_node} | | ... | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | ${classify_type} | ${classify_code} | TC07: ACL ICMPv6 packet filtering - bridged | | [Documentation] | | ... | [Top] TG=DUT1=TG. | | ... | [Enc] Eth-IPv6-ICMP. | | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ | | ... | and configure a ICMPv6 protocol filtering by ICMPv6 type and code. | | ... | [Ver] Send ICMPv6 packets from one TG interface\ | | ... | to the other, using different codes and types. Receive all packets\ | | ... | except those with the filtered type and code. | | [Tags] | EXPECTED_FAILING # Bug VPP-624, ICMP type/code values are not matched | | [Teardown] | Run Keywords | | ... | Show Packet Trace on All DUTs | ${nodes} | AND | | ... | Read plugin-ACL configuration from VAT | ${node} | AND | | ... | Clear plugin-acl Settings | ${node} | ${dut_to_tg_if1} | AND | | ... | Honeycomb Removes All Bridge Domains | | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} | | Given Setup interfaces and bridge domain for plugin-acl test | | ... | icmpv6 | ${acl_name_icmpv6} | | When Honeycomb Creates ACL Chain Through ACL plugin | | ... | ${dut_node} | ${acl_name_icmpv6} | ${acl_settings} | | And Honeycomb Assigns plugin-acl Chain To Interface | | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_icmpv6} | ingress | | Then Send ICMP packet with type and code | ${tg_node} | | ... | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | ${icmp_type} | ${icmp_code} | | Then Send ICMP packet with type and code | ${tg_node} | | ... | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | ${classify_type} | ${icmp_code} | | And Run Keyword And Expect Error | ICMP echo Rx timeout | | ... | Send ICMP packet with type and code | ${tg_node} | | ... | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | ${classify_type} | ${classify_code} | TC08: ACL reflexive IPv4 filtering through plugin-acl node - bridged | | [Documentation] | | ... | [Top] TG=DUT1=TG. | | ... | [Enc] Eth-IPv4-TCP. | | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG,\ | | ... | configure a "drop all" ACL on ingress and reflexive ACL on egress. | | ... | [Ver] Send a simple TCP packet to VPP interface 1 and do not receive\ | | ... | it back. Then send the packet with reversed src/dst IP address\ | | ... | to VPP interface 2 and receive it from interface 1(this should create\ | | ... | a reflexive "permit" rule) Finally, send the original packet again\ | | ... | and receive it from interface 2. | | [Tags] | EXPCETED_FAILING # Bug VPP-633, VPP crashes when any packet hits a reflexive rule | | [Teardown] | Run Keywords | | ... | Show Packet Trace on All DUTs | ${nodes} | AND | | ... | Read plugin-ACL configuration from VAT | ${node} | AND | | ... | Clear plugin-acl Settings | ${node} | ${dut_to_tg_if1} | AND | | ... | Honeycomb Removes All Bridge Domains | | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} | | Given Setup Interfaces And Bridge Domain For plugin-acl Test | | ... | reflex | ${acl_name_reflex} | | When Honeycomb Creates ACL Chain Through ACL plugin | | ... | ${dut_node} | ${acl_name_reflex} | ${acl_settings} | | And Honeycomb Assigns plugin-acl Chain To Interface | | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_reflex} | egress | | And Import Variables | resources/test_data/honeycomb/plugin_acl.py | | ... | block_all | block_all | | When Honeycomb Creates ACL Chain Through ACL plugin | | ... | ${dut_node} | block_all | ${acl_settings} | | And Honeycomb Assigns plugin-acl Chain To Interface | | ... | ${dut_node} | ${dut_to_tg_if1} | block_all | ingress | | And Run Keyword And Expect Error | TCP/UDP Rx timeout | | ... | Send TCP Or UDP Packet | ${tg_node} | | ... | ${classify_src} | ${classify_dst} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | TCP | ${src_port} | ${dst_port} | | And Send TCP Or UDP Packet | ${tg_node} | | ... | ${classify_dst} | ${classify_src} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if2_mac} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if2_mac} | | ... | TCP | ${dst_port} | ${src_port} | | And Send TCP Or UDP Packet | ${tg_node} | | ... | ${classify_src} | ${classify_dst} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | TCP | ${src_port} | ${dst_port} # Routing section # =============== | TC09: ACL IPv4 filtering through plugin-acl node - routed | | [Documentation] | | ... | [Top] TG=DUT1=TG. | | ... | [Enc] Eth-IPv4-TCP. | | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\ | | ... | interfaces to TG, add ARP entry and routes, and configure L3 IPv4 ACL\ | | ... | on ingress interface with src/dst IP and protocol. | | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ | | ... | to the other, using different IPv4 IPs. Receive all packets except\ | | ... | those with IPs in the filtered ranges and UDP protocol payload. | | [Tags] | EXPECTED_FAILING # routed interfaces not yet supported by ACL plugin (no Jira id available) | | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test | | ... | l3_ip4 | ${acl_name_l3_ip4} | | When Honeycomb Creates ACL Chain Through ACL plugin | | ... | ${dut_node} | ${acl_name_l3_ip4} | ${acl_settings} | | And Honeycomb Assigns plugin-acl Chain To Interface | | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l3_ip4} | ingress | | Then Send TCP Or UDP Packet | ${tg_node} | | ... | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | UDP | ${src_port} | ${dst_port} | | And Send TCP Or UDP Packet | ${tg_node} | | ... | ${classify_src} | ${classify_dst} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | TCP | ${src_port} | ${dst_port} | | And Run Keyword And Expect Error | TCP/UDP Rx timeout | | ... | Send TCP Or UDP Packet | ${tg_node} | | ... | ${classify_src} | ${classify_dst} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | UDP | ${src_port} | ${dst_port} | TC10: ACL IPv6 filtering through plugin-acl node - routed | | [Documentation] | | ... | [Top] TG=DUT1=TG. | | ... | [Enc] Eth-IPv6-TCP. | | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv6 addresses on both\ | | ... | interfaces to TG, add IP neighbor entry and routes, and configure\ | | ... | L3 IPv6 ACL on ingress interface with src/dst IP and next-header. | | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ | | ... | to the other, using different IPv6 IPs. Receive all packets except\ | | ... | those with IPs in the filtered ranges and UDP protocol payload. | | [Tags] | EXPECTED_FAILING # routed interfaces not yet supported by ACL plugin (no Jira id available) | | Given Path for 2-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | And Import Variables | resources/test_data/honeycomb/plugin_acl.py | | ... | L3_IP6 | ${acl_name_l3_ip6} | | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up | | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up # TODO: Configure addresses through Honeycomb when implemented. (Honeycomb-102) | | And Set Interface Address | ${dut_node} | | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length} | | And Set Interface Address | ${dut_node} | | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length} | | And VPP RA suppress link layer | ${dut_node} | ${dut_to_tg_if2} # TODO: Configure route through Honeycomb when implemented.(Honeycomb-58) | | And Add IP Neighbor | | ... | ${node} | ${dut_to_tg_if2} | ${gateway} | ${tg_to_dut_if2_mac} | | And VPP Route Add | ${node} | ${dst_net} | ${prefix_length} | | ... | ${gateway} | interface=${dut_to_tg_if2} | use_sw_index=False | | And VPP Route Add | ${node} | ${classify_dst_net} | ${prefix_length} | | ... | ${gateway} | interface=${dut_to_tg_if2} | use_sw_index=False | | When Honeycomb Creates ACL Chain Through ACL plugin | | ... | ${dut_node} | ${acl_name_l3_ip6} | ${acl_settings} | | And Honeycomb Assigns plugin-acl Chain To Interface | | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l3_ip6} | ingress | | Then Send TCP Or UDP Packet | ${tg_node} | | ... | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | UDP | ${src_port} | ${dst_port} | | And Send TCP Or UDP Packet | ${tg_node} | | ... | ${classify_src} | ${classify_dst} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | TCP | ${src_port} | ${dst_port} | | And Run Keyword And Expect Error | TCP/UDP Rx timeout | | ... | Send TCP Or UDP Packet | ${tg_node} | | ... | ${classify_src} | ${classify_dst} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | UDP | ${src_port} | ${dst_port} | TC11: ACL port filtering through plugin-acl node - routed | | [Documentation] | | ... | [Top] TG=DUT1=TG. | | ... | [Enc] Eth-IPv4-TCP. | | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\ | | ... | interfaces to TG, add ARP entry and routes, and configure L4 port ACL\ | | ... | on ingress interface with src/dst port ranges. | | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ | | ... | to the other, using different ports. Receive all packets except\ | | ... | those with ports in the filtered ranges. | | [Tags] | EXPECTED_FAILING # routed interfaces not yet supported by ACL plugin (no Jira id available) | | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test | | ... | L4 | ${acl_name_l4} | | When Honeycomb Creates ACL Chain Through ACL plugin | | ... | ${dut_node} | ${acl_name_l4} | ${acl_settings} | | And Honeycomb Assigns plugin-acl Chain To Interface | | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l4} | ingress | | Then Send TCP Or UDP Packet | ${tg_node} | | ... | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | TCP | ${src_port} | ${dst_port} | | And Run Keyword And Expect Error | TCP/UDP Rx timeout | | ... | Send TCP Or UDP Packet | ${tg_node} | | ... | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | TCP | ${classify_src} | ${classify_dst} | | And Run Keyword And Expect Error | TCP/UDP Rx timeout | | ... | Send TCP Or UDP Packet | ${tg_node} | | ... | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | TCP | ${classify_src+5} | ${classify_dst+5} | TC12: ACL filtering with IPv4 address and TCP port in one rule - routed | | [Documentation] | | ... | [Top] TG=DUT1=TG. | | ... | [Enc] Eth-IPv4-TCP. | | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\ | | ... | interfaces to TG, add ARP entry and routes and configure a mixed | | ... | rule with src/dst IP, TCP protocol and port ranges. | | ... | [Ver] Send simple TCP packets from one TG interface to the other,\ | | ... | using IPs and ports. Receive all packets except those with\ | | ... | both IPs and ports in the filtered ranges. | | [Tags] | EXPECTED_FAILING # routed interfaces not yet supported by ACL plugin (no Jira id available) | | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test | | ... | mixed | ${acl_name_mixed} | | When Honeycomb Creates ACL Chain Through ACL plugin | | ... | ${dut_node} | ${acl_name_mixed} | ${acl_settings} | | And Honeycomb Assigns plugin-acl Chain To Interface | | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_mixed} | ingress | | Then Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | TCP | ${src_port} | ${dst_port} | | Then Send TCP Or UDP Packet | ${tg_node} | | ... | ${classify_src_ip} | ${classify_dst_ip} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | TCP | ${src_port} | ${dst_port} | | And Run Keyword And Expect Error | TCP/UDP Rx timeout | | ... | Send TCP Or UDP Packet | ${tg_node} | | ... | ${classify_src_ip} | ${classify_dst_ip} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dst_mac} | | ... | TCP | ${classify_src_port} | ${classify_dst_port} | TC13: ACL ICMP packet filtering - routed | | [Documentation] | | ... | [Top] TG=DUT1=TG. | | ... | [Enc] Eth-IPv4-TCP. | | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\ | | ... | interfaces to TG, add ARP entry and routes, and configure ICMP ACL\ | | ... | on ingress interface with ICMP type and code. | | ... | [Ver] Send ICMP packets from one TG interface\ | | ... | to the other, using different codes and types. Receive all packets\ | | ... | except those with the filtered type and code. | | [Tags] | EXPECTED_FAILING # Bug VPP-624, ICMP type/code values are not matched # routed interfaces not yet supported by ACL plugin (no Jira id available) | | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test | | ... | icmp | ${acl_name_icmp} | | When Honeycomb Creates ACL Chain Through ACL plugin | | ... | ${dut_node} | ${acl_name_icmp} | ${acl_settings} | | And Honeycomb Assigns plugin-acl Chain To Interface | | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_icmp} | ingress | | Then Send ICMP packet with type and code | ${tg_node} | | ... | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | ${icmp_type} | ${icmp_code} | | Then Send ICMP packet with type and code | ${tg_node} | | ... | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | ${classify_type} | ${icmp_code} | | And Run Keyword And Expect Error | TCP/UDP Rx timeout | | ... | Send ICMP packet with type and code | ${tg_node} | | ... | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | ${classify_type} | ${classify_code} | TC14: ACL ICMPv6 packet filtering - routed | | [Documentation] | | ... | [Top] TG=DUT1=TG. | | ... | [Enc] Eth-IPv4-TCP. | | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv6 addresses on both\ | | ... | interfaces to TG, add ARP entry and routes, and configure ICMP ACL\ | | ... | on ingress interface with ICMPv6 type and code. | | ... | [Ver] Send ICMPv6 packets from one TG interface\ | | ... | to the other, using different codes and types. Receive all packets\ | | ... | except those with the filtered type and code. | | [Tags] | EXPECTED_FAILING # Bug VPP-624, ICMP type/code values are not matched # routed interfaces not yet supported by ACL plugin (no Jira id available) | | Given Path for 2-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | And Import Variables | resources/test_data/honeycomb/plugin_acl.py | | ... | L3_IP6 | ${acl_name_l3_ip6} | | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up | | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up # TODO: Configure addresses through Honeycomb when implemented. (Honeycomb-102) | | And Set Interface Address | ${dut_node} | | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length} | | And Set Interface Address | ${dut_node} | | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length} | | And VPP RA suppress link layer | ${dut_node} | ${dut_to_tg_if2} # TODO: Configure route through Honeycomb when implemented.(Honeycomb-58) | | And Add IP Neighbor | | ... | ${node} | ${dut_to_tg_if2} | ${gateway} | ${tg_to_dut_if2_mac} | | And VPP Route Add | ${node} | ${dst_net} | ${prefix_length} | | ... | ${gateway} | interface=${dut_to_tg_if2} | use_sw_index=False | | And VPP Route Add | ${node} | ${classify_dst_net} | ${prefix_length} | | ... | ${gateway} | interface=${dut_to_tg_if2} | use_sw_index=False | | When Honeycomb Creates ACL Chain Through ACL plugin | | ... | ${dut_node} | ${acl_name_icmp} | ${acl_settings} | | And Honeycomb Assigns plugin-acl Chain To Interface | | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_icmp} | ingress | | Then Send ICMP packet with type and code | ${tg_node} | | ... | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | ${icmp_type} | ${icmp_code} | | Then Send ICMP packet with type and code | ${tg_node} | | ... | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | ${classify_type} | ${icmp_code} | | And Run Keyword And Expect Error | TCP/UDP Rx timeout | | ... | Send ICMP packet with type and code | ${tg_node} | | ... | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | ${classify_type} | ${classify_code} | TC15: ACL reflexive IPv4 filtering through plugin-acl node - bridged | | [Documentation] | | ... | [Top] TG=DUT1=TG. | | ... | [Enc] Eth-IPv4-TCP. | | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\ | | ... | interfaces to TG, add ARP entries and routes,\ | | ... | configure a "drop all" ACL on ingress and reflexive ACL on egress. | | ... | [Ver] Send a simple TCP packet to VPP interface 1 and do not receive\ | | ... | it back. Then send the packet with reversed src/dst IP address\ | | ... | to VPP interface 2 and receive it from interface 1(this should create\ | | ... | a reflexive "permit" rule) Finally, send the original packet again\ | | ... | and receive it from interface 2. | | [Tags] | EXPECTED_FAILING # routed interfaces not yet supported by ACL plugin (no Jira id available) # Bug VPP-633, VPP crashes when any packet hits a reflexive rule | | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test | | ... | reflex | ${acl_name_reflex} | | And Add ARP on DUT | | ... | ${node} | ${dut_to_tg_if1} | ${gateway2} | ${tg_to_dut_if1_mac} | | And VPP Route Add | | ... | ${node} | ${src_net} | ${prefix_length} | ${gateway2} | | ... | interface=${dut_to_tg_if1} | use_sw_index=False | | And VPP Route Add | | ... | ${node} | ${classify_src_net} | ${prefix_length} | ${gateway2} | | ... | interface=${dut_to_tg_if1} | use_sw_index=False | | When Honeycomb Creates ACL Chain Through ACL plugin | | ... | ${dut_node} | ${acl_name_reflex} | ${acl_settings} | | And Honeycomb Assigns plugin-acl Chain To Interface | | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_reflex} | egress | | And Import Variables | resources/test_data/honeycomb/plugin_acl.py | | ... | block_all | block_all | | When Honeycomb Creates ACL Chain Through ACL plugin | | ... | ${dut_node} | block_all | ${acl_settings} | | And Honeycomb Assigns plugin-acl Chain To Interface | | ... | ${dut_node} | ${dut_to_tg_if1} | block_all | ingress | | And Run Keyword And Expect Error | TCP/UDP Rx timeout | | ... | Send TCP Or UDP Packet | ${tg_node} | | ... | ${classify_src} | ${classify_dst} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | TCP | ${src_port} | ${dst_port} | | And Send TCP Or UDP Packet | ${tg_node} | | ... | ${classify_dst} | ${classify_src} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if2_mac} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if2_mac} | | ... | TCP | ${dst_port} | ${src_port} | | And Send TCP Or UDP Packet | ${tg_node} | | ... | ${classify_src} | ${classify_dst} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | TCP | ${src_port} | ${dst_port} *** Keywords *** | Setup interface IPs and routes for IPv4 plugin-acl test | | [Arguments] | ${test_data_id} | ${acl_name} | | Path for 2-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | Import Variables | resources/test_data/honeycomb/plugin_acl.py | | ... | ${test_data_id} | ${acl_name} | | Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up | | Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up | | Honeycomb sets interface ipv4 address with prefix | ${dut_node} | | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length} | | Honeycomb sets interface ipv4 address with prefix | ${dut_node} | | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length} # TODO: Configure routes through Honeycomb once routing tests are added | | Add ARP on DUT | | ... | ${node} | ${dut_to_tg_if2} | ${gateway} | ${tg_to_dut_if2_mac} | | VPP Route Add | | ... | ${node} | ${dst_net} | ${prefix_length} | ${gateway} | | ... | interface=${dut_to_tg_if2} | use_sw_index=False | | VPP Route Add | | ... | ${node} | ${classify_dst_net} | ${prefix_length} | ${gateway} | | ... | interface=${dut_to_tg_if2} | use_sw_index=False | Setup interfaces and bridge domain for plugin-acl test | | [Arguments] | ${test_data_id} | ${acl_name} | | Path For 2-node Testing Is Set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | Import Variables | resources/test_data/honeycomb/plugin_acl.py | | ... | ${test_data_id} | ${acl_name} | | Honeycomb Sets Interface State | ${dut_node} | ${dut_to_tg_if1} | up | | Honeycomb Sets Interface State | ${dut_node} | ${dut_to_tg_if2} | up | | Honeycomb Creates first L2 Bridge Domain | | ... | ${dut_node} | ${bd_name} | ${bd_settings} | | Honeycomb Adds Interfaces To Bridge Domain | | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} | | ... | ${bd_name} | ${bd_if_settings}