# Copyright (c) 2016 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. *** Settings *** | Resource | resources/libraries/robot/ipsec.robot | Library | resources.libraries.python.Trace | Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO | ... | VM_ENV | HW_ENV | SKIP_VPP_PATCH | Test Setup | Run Keywords | Set up functional test | ... | AND | Configure topology for IPv4 IPsec testing | Test Teardown | Run Keywords | VPP IPsec Show | ${dut_node} | ... | AND | Tear down functional test | Documentation | *IPv4 IPsec tunnel mode test suite.* | ... | ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ | ... | between nodes. | ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure\ | ... | loopback an physical interface IPv4 addresses, static ARP record, route\ | ... | and IPsec manual keyed connection in tunnel mode. | ... | *[Ver] TG verification:* ESP packet is sent from TG to DUT1. ESP packet\ | ... | is received on TG from DUT1. | ... | *[Ref] Applicable standard specifications:* RFC4303. *** Variables *** | ${tg_spi}= | ${1000} | ${dut_spi}= | ${1001} | ${ESP_PROTO}= | ${50} | ${tg_if_ip4}= | 192.168.100.2 | ${dut_if_ip4}= | 192.168.100.3 | ${tg_lo_ip4}= | 192.168.3.3 | ${dut_lo_ip4}= | 192.168.4.4 | ${ip4_plen}= | ${24} *** Test Cases *** | TC01: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity | | [Documentation] | | ... | [Top] TG-DUT1. | | ... | [Ref] RFC4303. | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ | | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel mode. | | ... | [Ver] Send and receive ESP packet between TG and VPP node. | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | When Configure manual keyed connection for IPSec | | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} | | ... | ${dut_tun_ip} | ${tg_tun_ip} | | Then Send IPsec Packet and verify ESP encapsulation in received packet | ${tg_node} | ${tg_if} | ${dut_if_mac} | | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} | | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} | | ... | ${dut_tun_ip} | TC02: VPP process ESP packet in Tunnel Mode with AES-CBC-192 encryption and SHA1-96 integrity | | [Documentation] | | ... | [Top] TG-DUT1. | | ... | [Ref] RFC4303. | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ | | ... | algorithm AES-CBC-192 and integrity algorithm SHA1-96 in tunnel mode. | | ... | [Ver] Send and receive ESP packet between TG and VPP node. | | [Tags] | SKIP_PATCH | | ${encr_alg}= | Crypto Alg AES CBC 192 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | When Configure manual keyed connection for IPSec | | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} | | ... | ${dut_tun_ip} | ${tg_tun_ip} | | Then Send IPsec Packet and verify ESP encapsulation in received packet | ${tg_node} | ${tg_if} | ${dut_if_mac} | | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} | | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} | | ... | ${dut_tun_ip} | TC03: VPP process ESP packet in Tunnel Mode with AES-CBC-256 encryption and SHA1-96 integrity | | [Documentation] | | ... | [Top] TG-DUT1. | | ... | [Ref] RFC4303. | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ | | ... | algorithm AES-CBC-256 and integrity algorithm SHA1-96 in tunnel mode. | | ... | [Ver] Send and receive ESP packet between TG and VPP node. | | [Tags] | SKIP_PATCH | | ${encr_alg}= | Crypto Alg AES CBC 256 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | When Configure manual keyed connection for IPSec | | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} | | ... | ${dut_tun_ip} | ${tg_tun_ip} | | Then Send IPsec Packet and verify ESP encapsulation in received packet | ${tg_node} | ${tg_if} | ${dut_if_mac} | | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} | | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} | | ... | ${dut_tun_ip} | TC04: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA-256-128 integrity | | [Documentation] | | ... | [Top] TG-DUT1. | | ... | [Ref] RFC4303. | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ | | ... | algorithm AES-CBC-128 and integrity algorithm SHA-256-128 in tunnel\ | | ... | mode. | | ... | [Ver] Send and receive ESP packet between TG and VPP node. | | [Tags] | SKIP_PATCH | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA 256 128 | | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | When Configure manual keyed connection for IPSec | | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} | | ... | ${dut_tun_ip} | ${tg_tun_ip} | | Then Send IPsec Packet and verify ESP encapsulation in received packet | ${tg_node} | ${tg_if} | ${dut_if_mac} | | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} | | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} | | ... | ${dut_tun_ip} | TC05: VPP process ESP packet in Tunnel Mode with AES-CBC-192 encryption and SHA-256-128 integrity | | [Documentation] | | ... | [Top] TG-DUT1. | | ... | [Ref] RFC4303. | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ | | ... | algorithm AES-CBC-192 and integrity algorithm SHA-256-128 in tunnel\ | | ... | mode. | | ... | [Ver] Send and receive ESP packet between TG and VPP node. | | ${encr_alg}= | Crypto Alg AES CBC 192 | | ${auth_alg}= | Integ Alg SHA 256 128 | | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | When Configure manual keyed connection for IPSec | | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} | | ... | ${dut_tun_ip} | ${tg_tun_ip} | | Then Send IPsec Packet and verify ESP encapsulation in received packet | ${tg_node} | ${tg_if} | ${dut_if_mac} | | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} | | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} | | ... | ${dut_tun_ip} | TC06: VPP process ESP packet in Tunnel Mode with AES-CBC-256 encryption and SHA-256-128 integrity | | [Documentation] | | ... | [Top] TG-DUT1. | | ... | [Ref] RFC4303. | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ | | ... | algorithm AES-CBC-256 and integrity algorithm SHA-256-128 in tunnel\ | | ... | mode. | | ... | [Ver] Send and receive ESP packet between TG and VPP node. | | [Tags] | SKIP_PATCH | | ${encr_alg}= | Crypto Alg AES CBC 256 | | ${auth_alg}= | Integ Alg SHA 256 128 | | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | When Configure manual keyed connection for IPSec | | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} | | ... | ${dut_tun_ip} | ${tg_tun_ip} | | Then Send IPsec Packet and verify ESP encapsulation in received packet | ${tg_node} | ${tg_if} | ${dut_if_mac} | | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} | | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} | | ... | ${dut_tun_ip} | TC07: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA-384-192 integrity | | [Documentation] | | ... | [Top] TG-DUT1. | | ... | [Ref] RFC4303. | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ | | ... | algorithm AES-CBC-128 and integrity algorithm SHA-384-192 in tunnel\ | | ... | mode. | | ... | [Ver] Send and receive ESP packet between TG and VPP node. | | [Tags] | SKIP_PATCH | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA 384 192 | | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | When Configure manual keyed connection for IPSec | | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} | | ... | ${dut_tun_ip} | ${tg_tun_ip} | | Then Send IPsec Packet and verify ESP encapsulation in received packet | ${tg_node} | ${tg_if} | ${dut_if_mac} | | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} | | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} | | ... | ${dut_tun_ip} | TC08: VPP process ESP packet in Tunnel Mode with AES-CBC-192 encryption and SHA-384-192 integrity | | [Documentation] | | ... | [Top] TG-DUT1. | | ... | [Ref] RFC4303. | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ | | ... | algorithm AES-CBC-192 and integrity algorithm SHA-384-192 in tunnel\ | | ... | mode. | | ... | [Ver] Send and receive ESP packet between TG and VPP node. | | [Tags] | SKIP_PATCH | | ${encr_alg}= | Crypto Alg AES CBC 192 | | ${auth_alg}= | Integ Alg SHA 384 192 | | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | When Configure manual keyed connection for IPSec | | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} | | ... | ${dut_tun_ip} | ${tg_tun_ip} | | Then Send IPsec Packet and verify ESP encapsulation in received packet | ${tg_node} | ${tg_if} | ${dut_if_mac} | | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} | | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} | | ... | ${dut_tun_ip} | TC09: VPP process ESP packet in Tunnel Mode with AES-CBC-256 encryption and SHA-384-192 integrity | | [Documentation] | | ... | [Top] TG-DUT1. | | ... | [Ref] RFC4303. | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ | | ... | algorithm AES-CBC-256 and integrity algorithm SHA-384-192 in tunnel\ | | ... | mode. | | ... | [Ver] Send and receive ESP packet between TG and VPP node. | | ${encr_alg}= | Crypto Alg AES CBC 256 | | ${auth_alg}= | Integ Alg SHA 384 192 | | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | When Configure manual keyed connection for IPSec | | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} | | ... | ${dut_tun_ip} | ${tg_tun_ip} | | Then Send IPsec Packet and verify ESP encapsulation in received packet | ${tg_node} | ${tg_if} | ${dut_if_mac} | | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} | | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} | | ... | ${dut_tun_ip} | TC10: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA-512-256 integrity | | [Documentation] | | ... | [Top] TG-DUT1. | | ... | [Ref] RFC4303. | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ | | ... | algorithm AES-CBC-128 and integrity algorithm SHA-512-256 in tunnel\ | | ... | mode. | | ... | [Ver] Send and receive ESP packet between TG and VPP node. | | [Tags] | SKIP_PATCH | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA 512 256 | | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | When Configure manual keyed connection for IPSec | | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} | | ... | ${dut_tun_ip} | ${tg_tun_ip} | | Then Send IPsec Packet and verify ESP encapsulation in received packet | ${tg_node} | ${tg_if} | ${dut_if_mac} | | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} | | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} | | ... | ${dut_tun_ip} | TC11: VPP process ESP packet in Tunnel Mode with AES-CBC-192 encryption and SHA-512-256 integrity | | [Documentation] | | ... | [Top] TG-DUT1. | | ... | [Ref] RFC4303. | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ | | ... | algorithm AES-CBC-192 and integrity algorithm SHA-512-256 in tunnel\ | | ... | mode. | | ... | [Ver] Send and receive ESP packet between TG and VPP node. | | [Tags] | SKIP_PATCH | | ${encr_alg}= | Crypto Alg AES CBC 192 | | ${auth_alg}= | Integ Alg SHA 512 256 | | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | When Configure manual keyed connection for IPSec | | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} | | ... | ${dut_tun_ip} | ${tg_tun_ip} | | Then Send IPsec Packet and verify ESP encapsulation in received packet | ${tg_node} | ${tg_if} | ${dut_if_mac} | | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} | | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} | | ... | ${dut_tun_ip} | TC12: VPP process ESP packet in Tunnel Mode with AES-CBC-256 encryption and SHA-512-256 integrity | | [Documentation] | | ... | [Top] TG-DUT1. | | ... | [Ref] RFC4303. | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ | | ... | algorithm AES-CBC-256 and integrity algorithm SHA-512-256 in tunnel\ | | ... | mode. | | ... | [Ver] Send and receive ESP packet between TG and VPP node. | | ${encr_alg}= | Crypto Alg AES CBC 256 | | ${auth_alg}= | Integ Alg SHA 512 256 | | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | When Configure manual keyed connection for IPSec | | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} | | ... | ${dut_tun_ip} | ${tg_tun_ip} | | Then Send IPsec Packet and verify ESP encapsulation in received packet | ${tg_node} | ${tg_if} | ${dut_if_mac} | | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} | | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} | | ... | ${dut_tun_ip} | TC13: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity - different encryption alogrithms used | | [Documentation] | | ... | [Top] TG-DUT1. | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ | | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel mode. | | ... | [Ver] Send an ESP packet encrypted by encryption key different from\ | | ... | encryption key stored on VPP node from TG to VPP node and expect no\ | | ... | response to be received on TG. | | ... | [Ref] RFC4303. | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto | | When Configure manual keyed connection for IPSec | | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} | | ... | ${dut_tun_ip} | ${tg_tun_ip} | | Then Run Keyword And Expect Error | ESP packet Rx timeout | | ... | Send IPsec Packet and verify ESP encapsulation in received packet | ${tg_node} | ${tg_if} | ${dut_if_mac} | | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key} | ${tg_spi} | | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} | | ... | ${dut_tun_ip} | TC14: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity - different integrity alogrithms used | | [Documentation] | | ... | [Top] TG-DUT1. | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ | | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel mode. | | ... | [Ver] Send an ESP packet authenticated by integrity key different\ | | ... | from integrity key stored on VPP node from TG to VPP node and expect\ | | ... | no response to be received on TG. | | ... | [Ref] RFC4303. | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ | | When Configure manual keyed connection for IPSec | | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} | | ... | ${dut_tun_ip} | ${tg_tun_ip} | | Then Run Keyword And Expect Error | ESP packet Rx timeout | | ... | Send IPsec Packet and verify ESP encapsulation in received packet | ${tg_node} | ${tg_if} | ${dut_if_mac} | | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} | | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} | | ... | ${dut_tun_ip} | TC15: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity - different encryption and integrity alogrithms used | | [Documentation] | | ... | [Top] TG-DUT1. | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ | | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel mode. | | ... | [Ver] Send an ESP packet authenticated by integrity key and encrypted\ | | ... | by encryption key different from integrity and encryption keys stored\ | | ... | on VPP node from TG to VPP node and expect no response to be received\ | | ... | on TG. | | ... | [Ref] RFC4303. | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto | | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ | | When Configure manual keyed connection for IPSec | | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} | | ... | ${dut_tun_ip} | ${tg_tun_ip} | | Then Run Keyword And Expect Error | ESP packet Rx timeout | | ... | Send IPsec Packet and verify ESP encapsulation in received packet | ${tg_node} | ${tg_if} | ${dut_if_mac} | | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} | | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} | | ... | ${dut_tun_ip} | TC16: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys | | [Documentation] | | ... | [Top] TG-DUT1. | | ... | [Ref] RFC4303. | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ | | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel\ | | ... | mode. Then update SA keys - use new keys. | | ... | [Ver] Send and receive ESP packet between TG and VPP node before\ | | ... | and after SA keys update. | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | When Configure manual keyed connection for IPSec | | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} | | ... | ${dut_tun_ip} | ${tg_tun_ip} | | Then Send IPsec Packet and verify ESP encapsulation in received packet | ${tg_node} | ${tg_if} | ${dut_if_mac} | | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} | | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} | | ... | ${dut_tun_ip} | | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto | | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ | | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} | | ... | ${new_encr_key} | ${new_auth_key} | | Then Send IPsec Packet and verify ESP encapsulation in received packet | ${tg_node} | ${tg_if} | ${dut_if_mac} | | ... | ${encr_alg} | ${new_encr_key} | ${auth_alg} | ${new_auth_key} | | ... | ${tg_spi} | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} | | ... | ${dut_tun_ip} | TC17: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different encryption alogrithms used | | [Documentation] | | ... | [Top] TG-DUT1. | | ... | [Ref] RFC4303. | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ | | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel | | ... | mode. Then update SA keys - use new keys. | | ... | [Ver] Send an ESP packet encrypted by encryption key different from\ | | ... | encryption key stored on VPP node from TG to VPP node and expect no\ | | ... | response to be received on TG before and after SA keys update. | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | When Configure manual keyed connection for IPSec | | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} | | ... | ${dut_tun_ip} | ${tg_tun_ip} | | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto | | Then Run Keyword And Expect Error | ESP packet Rx timeout | | ... | Send IPsec Packet and verify ESP encapsulation in received packet | ${tg_node} | ${tg_if} | ${dut_if_mac} | | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key} | ${tg_spi} | | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} | | ... | ${dut_tun_ip} | | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto | | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ | | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} | | ... | ${new_encr_key} | ${new_auth_key} | | Then Run Keyword And Expect Error | ESP packet Rx timeout | | ... | Send IPsec Packet and verify ESP encapsulation in received packet | ${tg_node} | ${tg_if} | ${dut_if_mac} | | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${new_auth_key} | ${tg_spi} | | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} | | ... | ${dut_tun_ip} | TC18: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different integrity alogrithms used | | [Documentation] | | ... | [Top] TG-DUT1. | | ... | [Ref] RFC4303. | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ | | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel\ | | ... | mode. Then update SA keys - use new keys. | | ... | [Ver] Send an ESP packet authenticated by integrity key different\ | | ... | from integrity key stored on VPP node from TG to VPP node and expect\ | | ... | no response to be received on TG before and after SA keys update. | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | When Configure manual keyed connection for IPSec | | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} | | ... | ${dut_tun_ip} | ${tg_tun_ip} | | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ | | Then Run Keyword And Expect Error | ESP packet Rx timeout | | ... | Send IPsec Packet and verify ESP encapsulation in received packet | ${tg_node} | ${tg_if} | ${dut_if_mac} | | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} | | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} | | ... | ${dut_tun_ip} | | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto | | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ | | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} | | ... | ${new_encr_key} | ${new_auth_key} | | Then Run Keyword And Expect Error | ESP packet Rx timeout | | ... | Send IPsec Packet and verify ESP encapsulation in received packet | ${tg_node} | ${tg_if} | ${dut_if_mac} | | ... | ${encr_alg} | ${new_encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} | | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} | | ... | ${dut_tun_ip} | TC19: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different encryption and integrity alogrithms used | | [Documentation] | | ... | [Top] TG-DUT1. | | ... | [Ref] RFC4303. | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ | | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel\ | | ... | mode. Then update SA keys - use new keys. | | ... | [Ver] Send an ESP packet authenticated by integrity key and encrypted\ | | ... | by encryption key different from integrity and encryption keys stored\ | | ... | on VPP node from TG to VPP node and expect no response to be received\ | | ... | on TG before and after SA keys update. | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | When Configure manual keyed connection for IPSec | | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} | | ... | ${dut_tun_ip} | ${tg_tun_ip} | | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto | | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ | | Then Run Keyword And Expect Error | ESP packet Rx timeout | | ... | Send IPsec Packet and verify ESP encapsulation in received packet | ${tg_node} | ${tg_if} | ${dut_if_mac} | | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} | | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} | | ... | ${dut_tun_ip} | | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto | | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ | | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} | | ... | ${new_encr_key} | ${new_auth_key} | | Then Run Keyword And Expect Error | ESP packet Rx timeout | | ... | Send IPsec Packet and verify ESP encapsulation in received packet | ${tg_node} | ${tg_if} | ${dut_if_mac} | | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} | | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} | | ... | ${dut_tun_ip} *** Keywords *** | Get Second Random String | | [Arguments] | ${req_alg} | ${req_type} | | ${req_key_len}= | Run Keyword | Get ${req_type} Alg Key Len | ${req_alg} | | ${key}= | Set Variable If | '${req_type}' == 'Crypto' | ${encr_key} | | ... | '${req_type}' == 'Integ' | ${auth_key} | | :FOR | ${index} | IN RANGE | 100 | | | ${req_key}= | Generate Random String | ${req_key_len} | | | Return From Keyword If | '${req_key}' != '${key}' | ${req_key}