# Copyright (c) 2016 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. *** Settings *** | Resource | resources/libraries/robot/performance.robot | Library | resources.libraries.python.InterfaceUtil | Library | resources.libraries.python.NodePath | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | PERFTEST_LONG | ... | NIC_Intel-X520-DA2 | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L2 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown | Test Setup | Setup all DUTs before test | Test Teardown | Run Keywords | Show statistics on all DUTs | ... | Remove startup configuration of VPP from all DUTs | Documentation | *Throughput search suite (based on RFC2544).* | ... | ... | Test suite uses 3-node topology TG - DUT1 - DUT2 - TG, with one link | ... | between nodes. Traffic profile contain 2 L2 streams (1 stream per | ... | direction). Packets contain Ethernet header, IPv4 header, | ... | IP protocol=61 and random payload. Ethernet header MAC addresses are | ... | matching MAC addresses of the TG node. *** Test Cases *** | Find NDR by using RFC2544 linear search and 64B frames through L2 cross connect in 3-node topology | | [Documentation] | | ... | Find throughput with non drop rate for 64B frames by using | | ... | linear search starting at 6.0Mpps, stepping down with step of 0.1Mpps | | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | | ${framesize}= | Set Variable | 64 | | ${start_rate}= | Set Variable | 6000000 | | ${step_rate}= | Set Variable | 100000 | | ${min_rate}= | Set Variable | 100000 | | ${max_rate}= | Set Variable | 14880952 | | Given Add '1' worker threads and rss '1' without HTT to all DUTs | | And Add all PCI devices to all DUTs | | And Add No Multi Seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And L2 xconnect initialized in a 3-node circular topology | | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} | | ... | ${step_rate} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | Find NDR by using RFC2544 linear search and 1518B frames through L2 cross connect in 3-node topology | | [Documentation] | | ... | Find throughput with non drop rate for 1518B frames by using | | ... | linear search starting at 812,743pps, stepping down with step of 10,000pps | | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | | ${framesize}= | Set Variable | 1518 | | ${start_rate}= | Set Variable | 812743 | | ${step_rate}= | Set Variable | 10000 | | ${min_rate}= | Set Variable | 10000 | | ${max_rate}= | Set Variable | 812743 | | Given Add '1' worker threads and rss '1' without HTT to all DUTs | | And Add all PCI devices to all DUTs | | And Add No Multi Seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And L2 xconnect initialized in a 3-node circular topology | | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} | | ... | ${step_rate} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | Find NDR by using RFC2544 linear search and 9000B frames through L2 cross connect in 3-node topology | | [Documentation] | | ... | Find throughput with non drop rate for 9000B frames by using | | ... | linear search starting at 138,580pps, stepping down with step 5,000pps | | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | | ${framesize}= | Set Variable | 9000 | | ${start_rate}= | Set Variable | 138580 | | ${step_rate}= | Set Variable | 5000 | | ${min_rate}= | Set Variable | 5000 | | ${max_rate}= | Set Variable | 138580 | | Given Add '1' worker threads and rss '1' without HTT to all DUTs | | And Add all PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And L2 xconnect initialized in a 3-node circular topology | | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} | | ... | ${step_rate} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | Find NDR with 2 cores and rss 1 by using RFC2544 linear search and 64B frames through L2 cross connect in 3-node topology | | [Documentation] | | ... | Find throughput on 2 cores with non drop rate for 64B frames by using | | ... | linear search starting at 11Mpps, stepping down with step of 0.1Mpps | | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | | ${framesize}= | Set Variable | 64 | | ${start_rate}= | Set Variable | 11000000 | | ${step_rate}= | Set Variable | 100000 | | ${min_rate}= | Set Variable | 100000 | | ${max_rate}= | Set Variable | 14880952 | | Given Add '2' worker threads and rss '1' without HTT to all DUTs | | And Add all PCI devices to all DUTs | | And Add No Multi Seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And L2 xconnect initialized in a 3-node circular topology | | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} | | ... | ${step_rate} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | Find NDR with 2 cores and rss 1 by using RFC2544 linear search and 1518B frames through L2 cross connect in 3-node topology | | [Documentation] | | ... | Find throughput on 2 cores with non drop rate for 1518B frames by | | ... | using linear search starting at 812,743pps, stepping down with step | | ... | of 10,000pps | | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | | ${framesize}= | Set Variable | 1518 | | ${start_rate}= | Set Variable | 812743 | | ${step_rate}= | Set Variable | 10000 | | ${min_rate}= | Set Variable | 10000 | | ${max_rate}= | Set Variable | 812743 | | Given Add '2' worker threads and rss '1' without HTT to all DUTs | | And Add all PCI devices to all DUTs | | And Add No Multi Seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And L2 xconnect initialized in a 3-node circular topology | | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} | | ... | ${step_rate} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | Find NDR with 2 cores and rss 1 by using RFC2544 linear search and 9000B frames through L2 cross connect in 3-node topology | | [Documentation] | | ... | Find throughput on 2 cores with non drop rate for 9000B frames by | | ... | using linear search starting at 138,580pps, stepping down with step | | ... | of 5,000pps | | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | | ${framesize}= | Set Variable | 9000 | | ${start_rate}= | Set Variable | 138580 | | ${step_rate}= | Set Variable | 5000 | | ${min_rate}= | Set Variable | 5000 | | ${max_rate}= | Set Variable | 138580 | | Given Add '2' worker threads and rss '1' without HTT to all DUTs | | And Add all PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And L2 xconnect initialized in a 3-node circular topology | | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} | | ... | ${step_rate} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 64B frames through L2 cross connect in 3-node topology | | [Documentation] | | ... | Find throughput on 4 cores and rss 2 with non drop rate for 64B | | ... | frames by using linear search starting at 13.5Mpps, stepping down | | ... | with step of 0.1Mpps | | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | | ${framesize}= | Set Variable | 64 | | ${start_rate}= | Set Variable | 13500000 | | ${step_rate}= | Set Variable | 100000 | | ${min_rate}= | Set Variable | 100000 | | ${max_rate}= | Set Variable | 14880952 | | Given Add '4' worker threads and rss '2' without HTT to all DUTs | | And Add all PCI devices to all DUTs | | And Add No Multi Seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And L2 xconnect initialized in a 3-node circular topology | | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} | | ... | ${step_rate} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 1518B frames through L2 cross connect in 3-node topology | | [Documentation] | | ... | Find throughput on 4 cores and rss 2 with non drop rate for 1518B | | ... | frames by using linear search starting at 812,743pps, stepping down | | ... | with step of 10,000pps | | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | | ${framesize}= | Set Variable | 1518 | | ${start_rate}= | Set Variable | 812743 | | ${step_rate}= | Set Variable | 10000 | | ${min_rate}= | Set Variable | 10000 | | ${max_rate}= | Set Variable | 812743 | | Given Add '4' worker threads and rss '2' without HTT to all DUTs | | And Add all PCI devices to all DUTs | | And Add No Multi Seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And L2 xconnect initialized in a 3-node circular topology | | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} | | ... | ${step_rate} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 9000B frames through L2 cross connect in 3-node topology | | [Documentation] | | ... | Find throughput on 4 cores and rss 2 with non drop rate for 9000B frames by | | ... | using linear search starting at 138,580pps, stepping down with step | | ... | of 5,000pps | | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | | ${framesize}= | Set Variable | 9000 | | ${start_rate}= | Set Variable | 138580 | | ${step_rate}= | Set Variable | 5000 | | ${min_rate}= | Set Variable | 5000 | | ${max_rate}= | Set Variable | 138580 | | Given Add '4' worker threads and rss '2' without HTT to all DUTs | | And Add all PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And L2 xconnect initialized in a 3-node circular topology | | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} | | ... | ${step_rate} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate}