# Copyright (c) 2016 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. *** Settings *** | Resource | resources/libraries/robot/performance.robot | Library | resources.libraries.python.NodePath | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | PERFTEST_SHORT | ... | NIC_Intel-X520-DA2 | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L2 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown | Test Setup | Setup all DUTs before test | Test Teardown | Run Keywords | Show statistics on all DUTs | ... | Remove startup configuration of VPP from all DUTs | Documentation | Minimal throughput acceptance test cases *** Test Cases *** | 1core VPP passes 64B frames through bridge domain at 2x 3.2Mpps in 3-node topology | | [Documentation] | | ... | VPP with 1 core should pass 64B frames through bridge domain | | ... | at 2x 3.2Mpps in 3-node topology | | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | | ${framesize}= | Set Variable | 64 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 3.2mpps | | Given Add '1' worker threads and rss '1' without HTT to all DUTs | | And Add all PCI devices to all DUTs | | And Add No Multi Seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And L2 bridge domain initialized in a 3-node circular topology | | Then Traffic should pass with no loss | ${duration} | ${rate} | | ... | ${framesize} | 3-node-bridge | 1core VPP passes 1518B frames through bridge domain at 2x 812,743pps in 3-node topology | | [Documentation] | | ... | VPP with 1 core should pass 1518B frames through bridge domain | | ... | at 2x 812,743pps (2x 10Gbps) in 3-node topology | | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | | ${framesize}= | Set Variable | 1518 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '1' worker threads and rss '1' without HTT to all DUTs | | And Add all PCI devices to all DUTs | | And Add No Multi Seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And L2 bridge domain initialized in a 3-node circular topology | | Then Traffic should pass with no loss | ${duration} | ${rate} | | ... | ${framesize} | 3-node-bridge | 1core VPP passes 9000B frames through bridge domain at 2x 138,580pps in 3-node topology | | [Documentation] | | ... | VPP with 1 core should pass 9000B frames through bridge domain | | ... | at 2x 138,580pps (2x 10Gbps) in 3-node topology | | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | | ${framesize}= | Set Variable | 9000 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '1' worker threads and rss '1' without HTT to all DUTs | | And Add all PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And L2 bridge domain initialized in a 3-node circular topology | | Then Traffic should pass with no loss | ${duration} | ${rate} | | ... | ${framesize} | 3-node-bridge | 2core VPP with rss 1 passes 64B frames through bridge domain at 2x 6.9Mpps in 3-node topology | | [Documentation] | | ... | VPP with 2 cores should pass 64B frames through bridge domain | | ... | at 2x 6.9Mpps in 3-node topology | | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | | ${framesize}= | Set Variable | 64 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 6.9mpps | | Given Add '2' worker threads and rss '1' without HTT to all DUTs | | And Add all PCI devices to all DUTs | | And Add No Multi Seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And L2 bridge domain initialized in a 3-node circular topology | | Then Traffic should pass with no loss | ${duration} | ${rate} | | ... | ${framesize} | 3-node-bridge | 2core VPP with rss 1 passes 1518B frames through bridge domain at 2x 812,743pps in 3-node topology | | [Documentation] | | ... | VPP with 2 cores should pass 1518B frames through bridge domain | | ... | at 2x 812,743pps (2x 10Gbps) in 3-node topology | | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | | ${framesize}= | Set Variable | 1518 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '2' worker threads and rss '1' without HTT to all DUTs | | And Add all PCI devices to all DUTs | | And Add No Multi Seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And L2 bridge domain initialized in a 3-node circular topology | | Then Traffic should pass with no loss | ${duration} | ${rate} | | ... | ${framesize} | 3-node-bridge | 2core VPP with rss 1 passes 9000B frames through bridge domain at 2x 138,580pps in 3-node topology | | [Documentation] | | ... | VPP with 2 cores should pass 9000B frames through bridge domain | | ... | at 2x 138,580pps (2x 10Gbps) in 3-node topology | | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | | ${framesize}= | Set Variable | 9000 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '2' worker threads and rss '1' without HTT to all DUTs | | And Add all PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And L2 bridge domain initialized in a 3-node circular topology | | Then Traffic should pass with no loss | ${duration} | ${rate} | | ... | ${framesize} | 3-node-bridge | 4core VPP with rss 2 passes 64B frames through bridge domain at 2x 7.4Mpps in 3-node topology | | [Documentation] | | ... | VPP with 4 cores and rss 2 should pass 64B frames through bridge | | ... | domain at 2x7.4Mpps in 3-node topology | | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | | ${framesize}= | Set Variable | 64 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 7.4mpps | | Given Add '4' worker threads and rss '2' without HTT to all DUTs | | And Add all PCI devices to all DUTs | | And Add No Multi Seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And L2 bridge domain initialized in a 3-node circular topology | | Then Traffic should pass with no loss | ${duration} | ${rate} | | ... | ${framesize} | 3-node-bridge | 4core VPP with rss 2 passes 1518B frames through bridge domain at 2x 812,743pps in 3-node topology | | [Documentation] | | ... | VPP with 4 cores and rss 2 should pass 1518B frames through bridge | | ... | domain at 2x 812,743pps (2x 10Gbps) in 3-node topology | | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | | ${framesize}= | Set Variable | 1518 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '4' worker threads and rss '2' without HTT to all DUTs | | And Add all PCI devices to all DUTs | | And Add No Multi Seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And L2 bridge domain initialized in a 3-node circular topology | | Then Traffic should pass with no loss | ${duration} | ${rate} | | ... | ${framesize} | 3-node-bridge | 4core VPP with rss 2 passes 9000B frames through bridge domain at 2x 138,580pps in 3-node topology | | [Documentation] | | ... | VPP with 4 cores and rss 2should pass 9000B frames through bridge | | ... | domain at 2x 138,580pps (2x 10Gbps) in 3-node topology | | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | | ${framesize}= | Set Variable | 9000 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '4' worker threads and rss '2' without HTT to all DUTs | | And Add all PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And L2 bridge domain initialized in a 3-node circular topology | | Then Traffic should pass with no loss | ${duration} | ${rate} | | ... | ${framesize} | 3-node-bridge