# Copyright (c) 2016 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. *** Variables*** | ${ip_address}= | 192.168.0.4 | @{ip_addresses}= | 192.168.0.5 | 192.168.0.6 | 192.168.0.7 | 192.168.0.8 | ${state}= | enabled | ${interface}= | ${node['interfaces']['port1']['name']} | ${bd_name}= | bd_lisp | ${bd2_name}= | bd2_lisp | &{bd_settings}= | flood=${True} | forward=${True} | learn=${True} | ... | unknown-unicast-flood=${True} | arp-termination=${True} *** Settings *** | Library | resources.libraries.python.Trace.Trace | Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/shared/testing_path.robot | Resource | resources/libraries/robot/shared/traffic.robot | Resource | resources/libraries/robot/honeycomb/honeycomb.robot | Resource | resources/libraries/robot/honeycomb/interfaces.robot | Resource | resources/libraries/robot/honeycomb/lisp.robot | Resource | resources/libraries/robot/honeycomb/bridge_domain.robot | Variables | resources/test_data/honeycomb/lisp/lisp.py | ... | Documentation | *Honeycomb Lisp test suite.* | ... | Suite Setup | Set Up Honeycomb Functional Test Suite | ${node} | ... | Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} | ... | Force Tags | HC_FUNC *** Test Cases *** | TC01: Honeycomb enables LISP feature | | [Documentation] | Check if Honeycomb can enable the LISP feature. | | ... | | Given LISP Should Not Be Configured | ${node} | | When Honeycomb enables LISP | ${node} | | Then LISP state from Honeycomb should be | ${node} | ${state} | | And LISP state from VAT should be | ${node} | ${state} | TC02: Honeycomb adds locator set and locator | | [Documentation] | Check if Honeycomb can configure a locator set. | | ... | | Given LISP state from Honeycomb should be | ${node} | ${state} | | When Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} | | Then Locator Set From Honeycomb Should Be | | ... | ${node} | ${interface} | ${locator_set} | TC15: Honeycomb can remove configuration of LISP features | | [Documentation] | Check if Honeycomb can disable all LISP features. | | ... | | Given Locator Set From Honeycomb Should Be | | ... | ${node} | ${interface} | ${locator_set} | | When Honeycomb disables all LISP features | ${node} | | Then LISP Should Not Be Configured | ${node} | TC03: Honeycomb configures LISP - remote mapping - Bridge Domain | | [Documentation] | Check if Honeycomb can configure a remote LISP mapping\ | | ... | with a bridge domain. | | ... | | Given Honeycomb enables LISP | ${node} | | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} | | And Honeycomb creates first l2 bridge domain | | ... | ${node} | ${bd_name} | ${bd_settings} | | When Honeycomb adds LISP mapping | ${node} | ${lisp_settings_remote_bd} | | Then LISP mapping from Honeycomb should be | | ... | ${node} | ${remote_bd_subtable} | | And LISP mapping from VAT should be | | ... | ${node} | ${vat_remote_bd} | TC04: Honeycomb can remove LISP mapping | | [Documentation] | Check if Honeycomb can remove a configured LISP mapping. | | ... | | Given LISP mapping from Honeycomb should be | | ... | ${node} | ${remote_bd_subtable} | | And LISP mapping from VAT should be | | ... | ${node} | ${vat_remote_bd} | | When Honeycomb removes all LISP mappings | ${node} | | Then LISP mappings from Honeycomb should not exist | | ... | ${node} | | And LISP mappings from VAT should not exist | | ... | ${node} | TC05: Honeycomb configures LISP - remote mapping - VRF | | [Documentation] | Check if Honeycomb can configure a remote LISP mapping\ | | ... | with VRF. | | ... | | [Teardown] | Honeycomb removes all LISP mappings | ${node} | | ... | | Given LISP mappings from Honeycomb should not exist | | ... | ${node} | | And LISP mappings from VAT should not exist | | ... | ${node} | | When Honeycomb adds LISP mapping | ${node} | ${lisp_settings_remote_vrf} | | Then LISP mapping from Honeycomb should be | | ... | ${node} | ${remote_vrf_subtable} | | And LISP mapping from VAT should be | ${node} | ${vat_remote_vrf} | TC06: Honeycomb configures LISP - local mapping - Bridge Domain | | [Documentation] | Check if Honeycomb can configure a local LISP mapping\ | | ... | with a bridge domain. | | ... | | [Teardown] | Honeycomb removes all LISP mappings | ${node} | | ... | | Given Locator Set From Honeycomb Should Be | | ... | ${node} | ${interface} | ${locator_set} | | And LISP mappings from Honeycomb should not exist | | ... | ${node} | | And LISP mappings from VAT should not exist | | ... | ${node} | | And Honeycomb creates first l2 bridge domain | | ... | ${node} | ${bd2_name} | ${bd_settings} | | When Honeycomb adds LISP mapping | ${node} | ${lisp_settings_local_bd} | | Then LISP mapping from Honeycomb should be | ${node} | ${local_bd_subtable} | | And LISP mapping from VAT should be | ${node} | ${vat_local_bd} | TC07: Honeycomb configures LISP - local mapping - VRF | | [Documentation] | Check if Honeycomb can configure a local LISP mapping\ | | ... | with VRF. | | ... | | [Teardown] | Honeycomb removes all LISP mappings | ${node} | | ... | | Given Locator Set From Honeycomb Should Be | | ... | ${node} | ${interface} | ${locator_set} | | And LISP mappings from Honeycomb should not exist | | ... | ${node} | | And LISP mappings from VAT should not exist | | ... | ${node} | | When Honeycomb adds LISP mapping | ${node} | ${lisp_settings_local_vrf} | | Then LISP mapping from Honeycomb should be | ${node} | ${local_vrf_subtable} | | And LISP mapping from VAT should be | ${node} | ${vat_local_vrf} | TC08: Honeycomb configures LISP mapping with adjacency | | [Documentation] | Check if Honeycomb can configure local and remote LISP\ | | ... | mappings with VRF, and configure adjacency. | | ... | | [Teardown] | Honeycomb disables all LISP features | ${node} | | ... | | Given Locator Set From Honeycomb Should Be | | ... | ${node} | ${interface} | ${locator_set} | | And LISP mappings from Honeycomb should not exist | | ... | ${node} | | And LISP mappings from VAT should not exist | | ... | ${node} | | And Honeycomb adds LISP mapping | ${node} | ${lisp_settings_both_vrf} | | When Honeycomb adds LISP adjacency | ${node} | ${7} | remote_map_vrf | | ... | adj01 | ${vrf_adjacency} | | Then LISP mapping from Honeycomb should be | | ... | ${node} | ${adj_subtable} | TC09: Honeycomb configures LISP Map Resolver | | [Documentation] | Check if Honeycomb can configure a LISP Map Resolver. | | ... | | [Teardown] | Honeycomb disables all LISP features | ${node} | | Given Honeycomb enables LISP | ${node} | | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} | | And LISP state from VAT should be | ${node} | ${state} | | When Honeycomb adds LISP Map Resolver | ${node} | ${ip_address} | | Then Map Resolver from Honeycomb should be | ${node} | ${ip_address} | | And Map Resolver from VAT should be | ${node} | ${ip_address} | TC10: Honeycomb configures LISP Map Server | | [Documentation] | Check if Honeycomb can configure a LISP Map Server. | | ... | | [Teardown] | Honeycomb disables all LISP features | ${node} | | Given Honeycomb enables LISP | ${node} | | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} | | Given LISP state from Honeycomb should be | ${node} | ${state} | | And LISP state from VAT should be | ${node} | ${state} | | When Honeycomb adds LISP Map Server | ${node} | @{ip_addresses} | | Then Map Server from Honeycomb should be | ${node} | @{ip_addresses} | | And Map Server from VAT should be | ${node} | @{ip_addresses} | TC11: Honeycomb configures LISP PETR configuration | | [Documentation] | Check if Honeycomb can configure LISP | | ... | PETR configuration. | | ... | | [Teardown] | Honeycomb disables all LISP features | ${node} | | Given Honeycomb enables LISP | ${node} | | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} | | Given LISP state from Honeycomb should be | ${node} | ${state} | | And LISP state from VAT should be | ${node} | ${state} | | When Honeycomb enables LISP PETR feature | ${node} | ${ip_address} | | Then PETR configuration from Honeycomb should be | ${node} | ${ip_address} | | And PETR configuration from VAT should be | ${node} | enabled | TC12: Honeycomb configures LISP RLOC Probing | | [Documentation] | Check if Honeycomb can configure LISP RLOC Probing. | | ... | | [Teardown] | Honeycomb disables all LISP features | ${node} | | Given Honeycomb enables LISP | ${node} | | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} | | Given LISP state from Honeycomb should be | ${node} | ${state} | | And LISP state from VAT should be | ${node} | ${state} | | When Honeycomb enables LISP RLOC feature | ${node} | | Then RLOC Probing from Honeycomb should be | ${node} | ${True} | | And RLOC Probing from VAT should be | ${node} | enabled | TC13: Honeycomb configures LISP Map Register | | [Documentation] | Check if Honeycomb can configure a LISP Map Register. | | ... | | [Teardown] | Honeycomb disables all LISP features | ${node} | | Given Honeycomb enables LISP | ${node} | | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} | | Given LISP state from Honeycomb should be | ${node} | ${state} | | And LISP state from VAT should be | ${node} | ${state} | | When Honeycomb adds LISP Map Register | ${node} | ${True} | | Then Map Register from Honeycomb should be | ${node} | ${True} | | And Map Register from VAT should be | ${node} | enabled | TC14: Honeycomb enabled LISP PITR feature | | [Documentation] | Check if Honeycomb can configure the LISP PITR feature. | | ... # HC2VPP-263 Locator set reference in operational data is incorrect | | [Tags] | EXPECTED_FAILING | | [Teardown] | Honeycomb disables all LISP features | ${node} | | Given Honeycomb enables LISP | ${node} | | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} | | When Honeycomb enables LISP PITR feature | ${node} | ${locator_set} | | Then PITR config from Honeycomb should be | ${node} | ${locator_set} | | And PITR config from VAT should be | ${node} | ${locator_set} | TC16: Honeycomb can configure LISP for traffic test - IPv4 | | [Documentation] | | ... | [Top] TG-DUT1-TG. | | ... | [Enc] Eth-IPv4-LISP. | | ... | [Cfg] On DUT1 configure IPv4 LISP static adjacencies with TG. | | ... | [Ver] Make TG send ICMPv4 Echo Req between its interfaces through\ | | ... | DUT1 and verify LISP encapsulation of received packet. | | ... | [Ref] RFC6830. | | ... | | [Teardown] | LISP Functional Traffic Test Teardown | | Given Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | And Honeycomb configures interface state | | ... | ${dut_node} | ${dut_to_tg_if1} | up | | And Honeycomb configures interface state | | ... | ${dut_node} | ${dut_to_tg_if2} | up | | And Honeycomb sets interface IPv4 address with prefix | ${dut_node} | | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip4} | ${prefix_len4} | | And Honeycomb sets interface IPv4 address with prefix | ${dut_node} | | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip4} | ${prefix_len4} | | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if1} | | ... | ${src_ip4} | ${tg_to_dut_if1_mac} | | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if2} | | ... | ${tg_to_dut_if2_ip4} | ${tg_to_dut_if2_mac} | | When Honeycomb enables LISP | ${node} | | And Honeycomb adds locator set | ${node} | ${dut_to_tg_if2} | ${locator_set} | | And Honeycomb adds LISP mapping | ${node} | ${lisp_traffic_ip4} | | Then send packet and verify LISP encap | | ... | ${tg_node} | ${src_ip4} | ${dst_ip4} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac} | | ... | ${src_rloc4} | ${dst_rloc4} | TC17: Honeycomb can configure LISP for traffic test - IPv6 | | [Documentation] | | ... | [Top] TG-DUT1-TG. | | ... | [Enc] Eth-IPv6-LISP. | | ... | [Cfg] On DUT1 configure IPv6 LISP static adjacencies with TG. | | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces through\ | | ... | DUT1 and verify LISP encapsulation of received packet. | | ... | [Ref] RFC6830. | | ... | | [Teardown] | LISP Functional Traffic Test Teardown | | Given Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | And Honeycomb configures interface state | | ... | ${dut_node} | ${dut_to_tg_if1} | up | | And Honeycomb configures interface state | | ... | ${dut_node} | ${dut_to_tg_if2} | up | | And Honeycomb sets interface IPv6 address | ${dut_node} | | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip6} | ${prefix_len6} | | And Honeycomb sets interface IPv6 address | ${dut_node} | | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip6} | ${prefix_len6} | | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if1} | | ... | ${src_ip6} | ${tg_to_dut_if1_mac} | | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if2} | | ... | ${tg_to_dut_if2_ip6} | ${tg_to_dut_if2_mac} | | When Honeycomb enables LISP | ${node} | | And Honeycomb adds locator set | ${node} | ${dut_to_tg_if2} | ${locator_set} | | And Honeycomb adds LISP mapping | ${node} | ${lisp_traffic_ip6} | | Then send packet and verify LISP encap | | ... | ${tg_node} | ${src_ip6} | ${dst_ip6} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac} | | ... | ${src_rloc6} | ${dst_rloc6} | TC18: Honeycomb configures LISP Map Request Mode | | [Documentation] | Check if Honeycomb can configure LISP Map Request mode. | | ... | Note: Map Request Mode cannot be removed once configured. | | ... | | [Teardown] | Honeycomb disables LISP | ${node} | | ... | | Given Honeycomb Enables LISP | ${node} | | When Honeycomb sets LISP Map Request Mode | ${node} | ${True} | | Then Map Request Mode from Honeycomb should be | | ... | ${node} | source-destination | | And Map Request Mode from VAT should be | ${node} | src-dst