# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. *** Settings *** | Resource | resources/libraries/robot/shared/default.robot | | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | IP4BASE | UDP | UDP_TPUT | DRV_VFIO_PCI | ... | SCALE | HOSTS_1024 | RXQ_SIZE_0 | TXQ_SIZE_0 | ... | ethip4udp-ip4base-h1024-p63-s64512-tput | | Suite Setup | Setup suite topology interfaces | performance | Suite Teardown | Tear down suite | performance | Test Setup | Setup test | performance | Test Teardown | Tear down test | performance | | Test Template | Local Template | | # TODO CSIT-1765: Unify suite Documentation. | Documentation | **TPUT on lightweight UDP transactions with IPv4 routing** | ... | | ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. | ... | | ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing. | ... | | ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \ | ... | routing and two static IPv4 /22 route entries. DUT1 is tested with \ | ... | with ${nic_name}. | ... | | ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ | ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ | ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ | ... | expressed in percentage of packets transmitted. NDR and PDR are \ | ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ | ... | library. | ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ | ... | contains client and server ASTF programs, generating packets \ | ... | containing Ethernet header, IPv4 header, UDP header and static \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. | ... | | ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 | ${nic_txq_size}= | 0 | ${nic_pfs}= | 2 | ${nic_vfs}= | 0 | ${osi_layer}= | L7 | ${overhead}= | ${0} # Scale settings | ${n_hosts}= | ${1024} | ${n_ports}= | ${63} | ${transaction_scale}= | ${${n_hosts} * ${n_ports}} | ${packets_per_transaction_and_direction}= | ${ASTF_N_DATA_FRAMES} # Traffic profile: | ${traffic_profile}= | trex-astf-ethip4udp-${n_hosts}h-pps | ${transaction_type}= | udp_pps | ${disable_latency}= | ${True} *** Keywords *** | Local Template | | [Documentation] | | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). | | ... | Type: integer, string | | ... | - phy_cores - Number of physical cores. Type: integer | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer | | | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} | | | | Set Test Variable | \${frame_size} | | ${pre_stats}= | Create List | | ... | vpp-clear-stats | vpp-enable-packettrace | vpp-enable-elog | | ... | vpp-clear-runtime | | Set Test Variable | ${pre_stats} | | ${post_stats}= | Create List | | ... | vpp-show-stats | vpp-show-packettrace | vpp-show-elog | | ... | vpp-show-runtime | | Set Test Variable | ${post_stats} | | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface | | And Initialize IPv4 forwarding in circular topology | | ... | 192.168.0.0 | 20.0.0.0 | ${22} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** | 100B-1c-ethip4udp-ip4base-h1024-p63-s64512-tput-ndrpdr | | [Tags] | 100B | 1C | | frame_size=${100} | phy_cores=${1} | 100B-2c-ethip4udp-ip4base-h1024-p63-s64512-tput-ndrpdr | | [Tags] | 100B | 2C | | frame_size=${100} | phy_cores=${2} | 100B-4c-ethip4udp-ip4base-h1024-p63-s64512-tput-ndrpdr | | [Tags] | 100B | 4C | | frame_size=${100} | phy_cores=${4} | 1518B-1c-ethip4udp-ip4base-h1024-p63-s64512-tput-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} | 1518B-2c-ethip4udp-ip4base-h1024-p63-s64512-tput-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} | 1518B-4c-ethip4udp-ip4base-h1024-p63-s64512-tput-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} | 9000B-1c-ethip4udp-ip4base-h1024-p63-s64512-tput-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} | 9000B-2c-ethip4udp-ip4base-h1024-p63-s64512-tput-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} | 9000B-4c-ethip4udp-ip4base-h1024-p63-s64512-tput-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4}