# Copyright (c) 2018 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. *** Settings *** | Resource | resources/libraries/robot/performance/performance_setup.robot | Resource | resources/libraries/robot/overlay/lisp_static_adjacency.robot | Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X520-DA2 | IP6FWD | ENCAP | LISP | IP6UNRLAY | IP6OVRLAY | ... | Suite Setup | Set up 3-node performance topology with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test | ... | Test Teardown | Tear down performance discovery test | ${min_rate}pps | ... | ${framesize} | ${traffic_profile} | ... | Test Template | Local Template | ... | Documentation | *RFC6830: Pkt throughput Lisp test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ | ... | with single links between nodes.\ | ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISP-IPv6 on DUT1-DUT2,\ | ... | Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.\ | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ | ... | routing and static routes. LISPoIPv6 tunnel is configured between\ | ... | DUT1 and DUT2. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic\ | ... | by Intel.\ | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ | ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ | ... | of packets transmitted. NDR and PDR are discovered for different\ | ... | Ethernet L2 frame sizes using MLRsearch library.\ | ... | *[Ref] Applicable standard specifications:* RFC6830. *** Variables *** # X520-DA2 bandwidth limit | ${s_limit} | ${10000000000} # LISP overhead. | ${overhead} | 8 # Traffic profile: | ${traffic_profile} | trex-sl-3n-ethip6-ip6src253 *** Keywords *** | Local Template | | [Documentation] | | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\ | | ... | filters config.\ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.\ | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ | | ... | | ... | *Arguments:* | | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). | | ... | Type: integer, string | | ... | - phy_cores - Number of physical cores. Type: integer | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer | | ... | | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | ${10000} | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_limit} | ${framesize} | overhead=${overhead} | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 forwarding in 3-node circular topology | | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} | | ... | ${dut2_to_tg_ip6} | ${prefix6} | | And Configure LISP topology in 3-node circular topology | | ... | ${dut1} | ${dut1_if2} | ${NONE} | | ... | ${dut2} | ${dut2_if1} | ${NONE} | | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} | | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} | | Then Find NDR and PDR intervals using optimized search | | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} *** Test Cases *** | tc01-78B-1c-ethip6lispip6-ip6base-ndrpdr | | [Tags] | 78B | 1C | | framesize=${78} | phy_cores=${1} | tc02-78B-2c-ethip6lispip6-ip6base-ndrpdr | | [Tags] | 78B | 2C | | framesize=${78} | phy_cores=${2} | tc03-78B-4c-ethip6lispip6-ip6base-ndrpdr | | [Tags] | 78B | 4C | | framesize=${78} | phy_cores=${4} | tc04-1518B-1c-ethip6lispip6-ip6base-ndrpdr | | [Tags] | 1518B | 1C | | framesize=${1518} | phy_cores=${1} | tc05-1518B-2c-ethip6lispip6-ip6base-ndrpdr | | [Tags] | 1518B | 2C | | framesize=${1518} | phy_cores=${2} | tc06-1518B-4c-ethip6lispip6-ip6base-ndrpdr | | [Tags] | 1518B | 4C | | framesize=${1518} | phy_cores=${4} | tc07-9000B-1c-ethip6lispip6-ip6base-ndrpdr | | [Tags] | 9000B | 1C | | framesize=${9000} | phy_cores=${1} | tc08-9000B-2c-ethip6lispip6-ip6base-ndrpdr | | [Tags] | 9000B | 2C | | framesize=${9000} | phy_cores=${2} | tc09-9000B-4c-ethip6lispip6-ip6base-ndrpdr | | [Tags] | 9000B | 4C | | framesize=${9000} | phy_cores=${4} | tc10-IMIX-1c-ethip6lispip6-ip6base-ndrpdr | | [Tags] | IMIX | 1C | | framesize=IMIX_v4_1 | phy_cores=${1} | tc11-IMIX-2c-ethip6lispip6-ip6base-ndrpdr | | [Tags] | IMIX | 2C | | framesize=IMIX_v4_1 | phy_cores=${2} | tc12-IMIX-4c-ethip6lispip6-ip6base-ndrpdr | | [Tags] | IMIX | 4C | | framesize=IMIX_v4_1 | phy_cores=${4}