#!/bin/bash
-#set -xeuf -o pipefail
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
set -x
-#sudo apt-get -y install libpython2.7-dev
+cat /etc/hostname
+cat /etc/hosts
-rm -f priv_key
-cat > priv_key <<EOF
------BEGIN RSA PRIVATE KEY-----
-MIIEpgIBAAKCAQEAwUDlTpzSHpwLQotZOFS4AgcPNEWCnP1AB2hWFmvI+8Kah/gb
-v8ruZU9RqhPs56tyKzxbhvNkY4VbH5F1GilHZu3mLqzM4KfghMmaeMEjO1T7BYYd
-vuBfTvIluljfQ2vAlnYrDwn+ClxJk81m0pDgvrLEX4qVVh2sGh7UEkYy5r82DNa2
-4VjzPB1J/c8a9zP8FoZUhYIzF4FLvRMjUADpbMXgJMsGpaZLmz95ap0Eot7vb1Cc
-1LvF97iyBCrtIOSKRKA50ZhLGjMKmOwnYU+cP5718tbproDVi6VJOo7zeuXyetMs
-8YBl9kWblWG9BqP9jctFvsmi5G7hXgq1Y8u+DwIDAQABAoIBAQC/W4E0DHjLMny7
-0bvw2YKzD0Zw3fttdB94tkm4PdZv5MybooPnsAvLaXVV0hEdfVi5kzSWNl/LY/tN
-EP1BgGphc2QgB59/PPxGwFIjDCvUzlsZpynBHe+B/qh5ExNQcVvsIOqWI7DXlXaN
-0i/khOzmJ6HncRRah1spKimYRsaUUDskyg7q3QqMWVaqBbbMvLs/w7ZWd/zoDqCU
-MY/pCI6hkB3QbRo0OdiZLohphBl2ShABTwjvVyyKL5UA4jAEneJrhH5gWVLXnfgD
-p62W5CollKEYblC8mUkPxpP7Qo277zw3xaq+oktIZhc5SUEUd7nJZtNqVAHqkItW
-79VmpKyxAoGBAPfU+kqNPaTSvp+x1n5sn2SgipzDtgi9QqNmC4cjtrQQaaqI57SG
-OHw1jX8i7L2G1WvVtkHg060nlEVo5n65ffFOqeVBezLVJ7ghWI8U+oBiJJyQ4boD
-GJVNsoOSUQ0rtuGd9eVwfDk3ol9aCN0KK53oPfIYli29pyu4l095kg11AoGBAMef
-bPEMBI/2XmCPshLSwhGFl+dW8d+Klluj3CUQ/0vUlvma3dfBOYNsIwAgTP0iIUTg
-8DYE6KBCdPtxAUEI0YAEAKB9ry1tKR2NQEIPfslYytKErtwjAiqSi0heM6+zwEzu
-f54Z4oBhsMSL0jXoOMnu+NZzEc6EUdQeY4O+jhjzAoGBAIogC3dtjMPGKTP7+93u
-UE/XIioI8fWg9fj3sMka4IMu+pVvRCRbAjRH7JrFLkjbUyuMqs3Arnk9K+gbdQt/
-+m95Njtt6WoFXuPCwgbM3GidSmZwYT4454SfDzVBYScEDCNm1FuR+8ov9bFLDtGT
-D4gsngnGJj1MDFXTxZEn4nzZAoGBAKCg4WmpUPaCuXibyB+rZavxwsTNSn2lJ83/
-sYJGBhf/raiV/FLDUcM1vYg5dZnu37RsB/5/vqxOLZGyYd7x+Jo5HkQGPnKgNwhn
-g8BkdZIRF8uEJqxOo0ycdOU7n/2O93swIpKWo5LIiRPuqqzj+uZKnAL7vuVdxfaY
-qVz2daMPAoGBALgaaKa3voU/HO1PYLWIhFrBThyJ+BQSQ8OqrEzC8AnegWFxRAM8
-EqrzZXl7ACUuo1dH0Eipm41j2+BZWlQjiUgq5uj8+yzy+EU1ZRRyJcOKzbDACeuD
-BpWWSXGBI5G4CppeYLjMUHZpJYeX1USULJQd2c4crLJKb76E8gz3Z9kN
------END RSA PRIVATE KEY-----
-EOF
+export DEBIAN_FRONTEND=noninteractive
+sudo apt-get -y update
+sudo apt-get -y install libpython2.7-dev python-virtualenv
-chmod 600 priv_key
-ls -la
+VIRL_SERVERS=("10.30.51.28" "10.30.51.29" "10.30.51.30")
+VIRL_SERVER=""
-#git clone ssh://rotterdam-jobbuilder@gerrit.fd.io:29418/vpp
-#
-#cd vpp/build-root
-#./bootstrap.sh
-#make PLATFORM=vpp TAG=vpp_debug install-deb
-#
-#ls -la
+VIRL_USERNAME=jenkins-in
+VIRL_PKEY=priv_key
+VIRL_SERVER_STATUS_FILE="status"
+VIRL_SERVER_EXPECTED_STATUS="PRODUCTION"
+
+SSH_OPTIONS="-i ${VIRL_PKEY} -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o BatchMode=yes -o LogLevel=error"
-#VIRL_VMS="10.30.51.53,10.30.51.51,10.30.51.52"
-#IFS=',' read -ra ADDR <<< "${VIRL_VMS}"
-#
function ssh_do() {
echo
echo "### " ssh $@
- ssh -i priv_key -o StrictHostKeyChecking=no $@
+ ssh ${SSH_OPTIONS} $@
}
-#for addr in "${ADDR[@]}"; do
-# echo
-# echo ${addr}
-# echo
+rm -f ${VIRL_PKEY}
+cat > ${VIRL_PKEY} <<EOF
+-----BEGIN RSA PRIVATE KEY-----
+MIIEpQIBAAKCAQEA+IHXq87GcqMR1C47rzx6Cbip5Ghq8pKrbqKrP5Nf41HcYrT6
+GOXl9nFWKsMOzIlIn+8y7Il27eZh7csQGApbg8QLiHMtcYEmWNzKZpkqg4nuAPxX
+VXwlKgnKX902SrET9Gp9TDayiHtCRWVfrlPPPSA0UEXW6BjLN/uHJ+W/Xzrrab+9
+asBVa05vT2W6n0KJ66zfCaeDM912mQ6SttscAwFoWDmdHlegiVqrlIG2ABxOvxxz
+L3dM3iSmlmQlzv9bThjo+nI4KFYh6m5wrZmAo5r/4q9CIJc21HVnTqkGOWJIZz6J
+73lePJVSq5gYqaoGw3swFEA/MDkOx7baWKSoLQIDAQABAoIBAQCNBeolNp+JWJ76
+gQ4fwLsknyXSV6sxYyhkDW4PEwwcTU06uqce0AAzXVffxne0fMe48x47+zqBgPbb
+4huM+Pu8B9nfojUMr5TaYtl9Zbgpk3F8H7dT7LKOa6XrxvZTZrADSRc30+Z26zPN
+e9zTaf42Gvt0/l0Zs1BHwbaOXqO+XuwJ3/F9Sf3PQYWXD3EOWjpHDP/X/1vAs6lV
+SLkm6J/9KKE1m6I6LTYjIXuYt4SXybW6N2TSy54hhQtYcDUnIU2hR/PHVWKrGA0J
+kELgrtTNTdbML27O5gFWU4PLUEYTZ9fN11D6qUZKxLcPOiPPHXkiILMRCCnG5DYI
+ksBAU/YlAoGBAPxZO9VO18TYc8THV1nLKcvT2+1oSs1UcA2wNQMU55t910ZYinRa
+MRwUhMOf8Mv5wOeiZaRICQB1PnVWtDVmGECgPpK6jUxqAwn8rgJcnoafLGL5YKMY
+RVafTe6N5LXgCaOcJrk21wxs6v7ninEbUxxc575urOvZMBkymDw91dwbAoGBAPwa
+YRhKhrzFKZzdK0RadVjnxKvolUllpoqqg3XuvmeAJHAOAnaOgVWq68NAcp5FZJv0
+2D2Up7TX8pjf9MofP1SJbcraKBpK4NzfNkA0dSdEi+FhVofAJ9umB2o5LW1n7sab
+UIrjsdzSJK/9Zb9yTTHPyibYzNEgaJV1HsbxfEFXAoGAYO2RmvRm0phll18OQVJV
+IpKk9kLKAKZ/R/K32hAsikBC8SVPQTPniyaifFWx81diblalff2hX4ipTf7Yx24I
+wMIMZuW7Im/R7QMef4+94G3Bad7p7JuE/qnAEHJ2OBnu+eYfxaK35XDsrq6XMazS
+NqHE7hOq3giVfgg+C12hCKMCgYEAtu9dbYcG5owbehxzfRI2/OCRsjz/t1bv1seM
+xVMND4XI6xb/apBWAZgZpIFrqrWoIBM3ptfsKipZe91ngBPUnL9s0Dolx452RVAj
+yctHB8uRxWYgqDkjsxtzXf1HnZBBkBS8CUzYj+hdfuddoeKLaY3invXLCiV+PpXS
+U4KAK9kCgYEAtSv0m5+Fg74BbAiFB6kCh11FYkW94YI6B/E2D/uVTD5dJhyEUFgZ
+cWsudXjMki8734WSpMBqBp/J8wG3C9ZS6IpQD+U7UXA+roB7Qr+j4TqtWfM+87Rh
+maOpG56uAyR0w5Z9BhwzA3VakibVk9KwDgZ29WtKFzuATLFnOtCS46E=
+-----END RSA PRIVATE KEY-----
+EOF
+chmod 600 ${VIRL_PKEY}
+
+#
+# Pick a random host from the array of VIRL servers, and attempt
+# to reach it and verify it's status.
+#
+# The server must be reachable, and have a "status" file with
+# the content "PRODUCTION", to be selected.
+#
+# If the server is not reachable, or does not have the correct
+# status, remove it from the array and start again.
#
-# ssh_do cisco@${addr} hostname || true
-# ssh_do cisco@${addr} "ifconfig -a" || true
-# ssh_do cisco@${addr} "lspci -Dnn | grep 0200" || true
-# ssh_do cisco@${addr} "free -m" || true
-# ssh_do cisco@${addr} "cat /proc/meminfo" || true
-# ssh_do cisco@${addr} "dpkg -l vpp\*" || true
-# ssh_do cisco@${addr} "lshw -c network" || true
-# ssh_do cisco@${addr} "sudo -S sh -c 'echo exec show hardware | vpp_api_test '"
-#done
+# Abort if there are no more servers left in the array.
+#
+while [[ ! "$VIRL_SERVER" ]]
+do
+ num_hosts=${#VIRL_SERVERS[@]}
+ if [ $num_hosts == 0 ]
+ then
+ echo "No more VIRL candidate hosts available, failing."
+ exit 127
+ fi
+ element=$[ $RANDOM % $num_hosts ]
+ virl_server_candidate=${VIRL_SERVERS[$element]}
+ virl_server_status=$(ssh ${SSH_OPTIONS} ${VIRL_USERNAME}@${virl_server_candidate} cat $VIRL_SERVER_STATUS_FILE 2>&1)
+ echo VIRL HOST $virl_server_candidate status is \"$virl_server_status\"
+ if [ "$virl_server_status" == "$VIRL_SERVER_EXPECTED_STATUS" ]
+ then
+ # Candidate is in good status. Select this server.
+ VIRL_SERVER="$virl_server_candidate"
+ else
+ # Candidate is in bad status. Remove from array.
+ VIRL_SERVERS=("${VIRL_SERVERS[@]:0:$element}" "${VIRL_SERVERS[@]:$[$element+1]}")
+ fi
+done
+
+# Temporarily download VPP packages from nexus.fd.io
+
+if [ "${#}" -ne "0" ]; then
+ arr=(${@})
+ echo ${arr[0]}
+else
+ rm -f *.deb
+ VPP_STABLE_VER="16.09-rc0~47-g3419d0b~b214_amd64"
+ VPP_REPO_URL="https://nexus.fd.io/service/local/repositories/fd.io.master.ubuntu.trusty.main/content/io/fd/vpp"
+ wget -q "${VPP_REPO_URL}/vpp/${VPP_STABLE_VER}/vpp-${VPP_STABLE_VER}.deb" || exit
+ wget -q "${VPP_REPO_URL}/vpp-dbg/${VPP_STABLE_VER}/vpp-dbg-${VPP_STABLE_VER}.deb" || exit
+ wget -q "${VPP_REPO_URL}/vpp-dev/${VPP_STABLE_VER}/vpp-dev-${VPP_STABLE_VER}.deb" || exit
+ wget -q "${VPP_REPO_URL}/vpp-dpdk-dev/${VPP_STABLE_VER}/vpp-dpdk-dev-${VPP_STABLE_VER}.deb" || exit
+ wget -q "${VPP_REPO_URL}/vpp-dpdk-dkms/${VPP_STABLE_VER}/vpp-dpdk-dkms-${VPP_STABLE_VER}.deb" || exit
+ wget -q "${VPP_REPO_URL}/vpp-lib/${VPP_STABLE_VER}/vpp-lib-${VPP_STABLE_VER}.deb" || exit
+fi
+
+VPP_DEBS=(*.deb)
+echo ${VPP_DEBS[@]}
+VIRL_DIR_LOC="/tmp"
+VPP_DEBS_FULL=(${VPP_DEBS[@]})
+
+# Prepend directory location at remote host to deb file list
+for index in "${!VPP_DEBS_FULL[@]}"; do
+ VPP_DEBS_FULL[${index}]=${VIRL_DIR_LOC}/${VPP_DEBS_FULL[${index}]}
+done
+
+echo "Updated file names: " ${VPP_DEBS_FULL[@]}
+
+cat ${VIRL_PKEY}
+# Copy the files to VIRL host
+scp ${SSH_OPTIONS} *.deb \
+ ${VIRL_USERNAME}@${VIRL_SERVER}:${VIRL_DIR_LOC}/
+
+result=$?
+if [ "${result}" -ne "0" ]; then
+ echo "Failed to copy vpp deb files to virl host"
+ echo ${result}
+ exit ${result}
+fi
+
+# Start a simulation on VIRL server
+echo "Starting simulation on VIRL server"
+
+function stop_virl_simulation {
+ ssh ${SSH_OPTIONS} ${VIRL_USERNAME}@${VIRL_SERVER}\
+ "stop-testcase ${VIRL_SID}"
+}
+VIRL_SID=$(ssh ${SSH_OPTIONS} \
+ ${VIRL_USERNAME}@${VIRL_SERVER} \
+ "start-testcase -c double-ring-nested ${VPP_DEBS_FULL[@]}")
+retval=$?
+if [ "$?" -ne "0" ]; then
+ echo "VIRL simulation start failed"
+ exit ${retval}
+fi
-#ssh_do cisco@10.30.51.73 "sudo apt-get -y install python-virtualenv python-dev"
-#ssh_do cisco@10.30.51.73 "lspci -vmmks 0000:00:04.0"
+if [[ ! "${VIRL_SID}" =~ session-[a-zA-Z0-9_]{6} ]]; then
+ echo "No VIRL session ID reported."
+ exit 127
+fi
-#ssh_do cisco@10.30.51.72 "sudo -S sh -c 'echo exec show hardware | vpp_api_test '"
-#ssh_do cisco@10.30.51.71 "sudo -S sh -c 'echo exec show hardware | vpp_api_test '"
+# Upon script exit, cleanup the simulation execution
+trap stop_virl_simulation EXIT
+echo ${VIRL_SID}
+ssh_do ${VIRL_USERNAME}@${VIRL_SERVER} cat /scratch/${VIRL_SID}/topology.yaml
-#echo Virtualenv install
-#VE_DIR=`pwd`/build
-#export PYTHONPATH=${VE_DIR}/lib/python2.7/site-packages
-#
-#curl -O https://pypi.python.org/packages/source/v/virtualenv/virtualenv-14.0.6.tar.gz
-#tar -zxf virtualenv-14.0.6.tar.gz
-#cd virtualenv-14.0.6
-#
-#python setup.py install --prefix=${VE_DIR}
-#
-#cd ..
-#${VE_DIR}/bin/virtualenv env
+# Download the topology file from virl session
+scp ${SSH_OPTIONS} \
+ ${VIRL_USERNAME}@${VIRL_SERVER}:/scratch/${VIRL_SID}/topology.yaml \
+ topologies/enabled/topology.yaml
+
+retval=$?
+if [ "$?" -ne "0" ]; then
+ echo "Failed to copy topology file from VIRL simulation"
+ exit ${retval}
+fi
-virtualenv env
+
+virtualenv --system-site-packages env
. env/bin/activate
echo pip install
pip install -r requirements.txt
-#PYTHONPATH=`pwd` pybot -L TRACE -v TOPOLOGY_PATH:topologies/available/virl.yaml --exitonfailure --exitonerror --skipteardownonexit tests
-PYTHONPATH=`pwd` pybot -L TRACE -v TOPOLOGY_PATH:topologies/available/virl.yaml --exclude PERFTEST tests || true
-
-
+pykwalify -s resources/topology_schemas/3_node_topology.sch.yaml \
+ -s resources/topology_schemas/topology.sch.yaml \
+ -d topologies/enabled/topology.yaml \
+ -vvv
+
+result=$?
+if [ "${result}" -ne "0" ]; then
+ echo "Topology schema validation failed."
+ echo "However, the tests will start."
+fi
+
+PYTHONPATH=`pwd` pybot -L TRACE \
+ -v TOPOLOGY_PATH:topologies/enabled/topology.yaml \
+ --include vm_envAND3_node_single_link_topo \
+ --include vm_envAND3_node_double_link_topo \
+ --exclude PERFTEST \
+ --noncritical EXPECTED_FAILING \
+ tests/
Code Review / csit.git / blobdiff