+++ /dev/null
----
-title: "Generic Segmentation Offload"
-weight: 15
----
-
-# Generic Segmentation Offload
-
-## Overview
-
-Generic Segmentation Offload (GSO) reduces per-packet processing
-overhead by enabling applications to pass a multi-packet buffer to
-(v)NIC and process a smaller number of large packets (e.g. frame size of
-64 KB), instead of processing higher numbers of small packets (e.g.
-frame size of 1500 B), thus reducing per-packet overhead.
-
-GSO tests for VPP vhostuser and tapv2 interfaces. All tests cases use iPerf3
-client and server applications running TCP/IP as a traffic generator. For
-performance comparison the same tests are run without GSO enabled.
-
-## GSO Test Topologies
-
-Two VPP GSO test topologies are implemented:
-
-1. iPerfC_GSOvirtio_LinuxVM --- GSOvhost_VPP_GSOvhost --- iPerfS_GSOvirtio_LinuxVM
-
- - Tests VPP GSO on vhostuser interfaces and interaction with Linux
- virtio with GSO enabled.
-
-2. iPerfC_GSOtap_LinuxNspace --- GSOtapv2_VPP_GSOtapv2 --- iPerfS_GSOtap_LinuxNspace
-
- - Tests VPP GSO on tapv2 interfaces and interaction with Linux tap
- with GSO enabled.
-
-Common configuration:
-
-- iPerfC (client) and iPerfS (server) run in TCP/IP mode without upper
- bandwidth limit.
-- Trial duration is set to 30 sec.
-- iPerfC, iPerfS and VPP run in the single SUT node.
-
-
-## VPP GSOtap Topology
-
-### VPP Configuration
-
-VPP GSOtap tests are executed without using hyperthreading. VPP worker runs on
-a single core. Multi-core tests are not executed. Each interface belongs to
-separate namespace. Following core pinning scheme is used:
-
-- 1t1c (rxq=1, rx_qsz=4096, tx_qsz=4096)
- - system isolated: 0,28,56,84
- - vpp mt: 1
- - vpp wt: 2
- - vhost: 3-5
- - iperf-s: 6
- - iperf-c: 7
-
-### iPerf3 Server Configuration
-
-iPerf3 version used 3.7
-
- $ sudo -E -S ip netns exec tap1_namespace iperf3 \
- --server --daemon --pidfile /tmp/iperf3_server.pid --logfile /tmp/iperf3.log --port 5201 --affinity <X>
-
-For the full iPerf3 reference please see:
-[iPerf3 docs](https://github.com/esnet/iperf/blob/master/docs/invoking.rst).
-
-
-### iPerf3 Client Configuration
-
-iPerf3 version used 3.7
-
- $ sudo -E -S ip netns exec tap1_namespace iperf3 \
- --client 2.2.2.2 --bind 1.1.1.1 --port 5201 --parallel <Y> --time 30.0 --affinity <X> --zerocopy
-
-For the full iPerf3 reference please see:
-[iPerf3 docs](https://github.com/esnet/iperf/blob/master/docs/invoking.rst).
-
-
-## VPP GSOvhost Topology
-
-### VPP Configuration
-
-VPP GSOvhost tests are executed without using hyperthreading. VPP worker runs
-on a single core. Multi-core tests are not executed. Following core pinning
-scheme is used:
-
-- 1t1c (rxq=1, rx_qsz=1024, tx_qsz=1024)
- - system isolated: 0,28,56,84
- - vpp mt: 1
- - vpp wt: 2
- - vm-iperf-s: 3,4,5,6,7
- - vm-iperf-c: 8,9,10,11,12
- - iperf-s: 1
- - iperf-c: 1
-
-### iPerf3 Server Configuration
-
-iPerf3 version used 3.7
-
- $ sudo iperf3 \
- --server --daemon --pidfile /tmp/iperf3_server.pid --logfile /tmp/iperf3.log --port 5201 --affinity X
-
-For the full iPerf3 reference please see:
-[iPerf3 docs](https://github.com/esnet/iperf/blob/master/docs/invoking.rst).
-
-
-### iPerf3 Client Configuration
-
-iPerf3 version used 3.7
-
- $ sudo iperf3 \
- --client 2.2.2.2 --bind 1.1.1.1 --port 5201 --parallel <Y> --time 30.0 --affinity X --zerocopy
-
-For the full iPerf3 reference please see:
-[iPerf3 docs](https://github.com/esnet/iperf/blob/master/docs/invoking.rst).
\ No newline at end of file
Code Review / csit.git / blobdiff