+++ /dev/null
-# SuperMicro Cascadelake Servers - HW and BIOS Configuration
-
-1. [Linux lscpu](#linux-lscpu)
-1. [Linux dmidecode](#dmidecode)
-1. [Linux dmidecode pci](#linux-dmidecode-pci)
-1. [Linux dmidecode memory](#linux-dmidecode-memory)
-1. [Xeon Clx Server BIOS Configuration](#xeon-clx-server-bios-configuration)
- 1. [Boot Feature](#boot-feature)
- 1. [CPU Configuration](#cpu-configuration)
- 1. [Advanced Power Management Configuration](#advanced-power-management-configuration)
- 1. [CPU P State Control](#cpu-p-state-control)
- 1. [Hardware PM State Control](#hardware-pm-state-control)
- 1. [CPU C State Control](#cpu-c-state-control)
- 1. [Package C State Control](#package-c-state-control)
- 1. [CPU T State Control](#cpu-t-state-control)
- 1. [Chipset Configuration](#chipset-configuration)
- 1. [North Bridge](#north-bridge)
- 1. [UPI Configuration](#upi-configuration)
- 1. [Memory Configuration](#memory-configuration)
- 1. [IIO Configuration](#iio-configuration)
- 1. [CPU1 Configuration](#cpu1-configuration)
- 1. [CPU2 Configuration](#cpu2-configuration)
- 1. [South Bridge](#south-bridge)
- 1. [PCIe/PCI/PnP Configuration](#pciepcipnp-configuration)
- 1. [ACPI Settings](#acpi-settings)
-1. [Xeon Clx Server Firmware Inventory](#xeon-clx-server-firmware-inventory)
-
-## Linux lscpu
-
-```
-$ lscpu
-Architecture: x86_64
-CPU op-mode(s): 32-bit, 64-bit
-Byte Order: Little Endian
-CPU(s): 112
-On-line CPU(s) list: 0-111
-Thread(s) per core: 2
-Core(s) per socket: 28
-Socket(s): 2
-NUMA node(s): 2
-Vendor ID: GenuineIntel
-CPU family: 6
-Model: 85
-Model name: Intel(R) Xeon(R) Platinum 8280 CPU @ 2.70GHz
-Stepping: 7
-CPU MHz: 3299.609
-BogoMIPS: 5400.00
-Virtualization: VT-x
-L1d cache: 32K
-L1i cache: 32K
-L2 cache: 1024K
-L3 cache: 39424K
-NUMA node0 CPU(s): 0-27,56-83
-NUMA node1 CPU(s): 28-55,84-111
-Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
-cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx
-pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology
-nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est
-tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt
-tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch
-cpuid_fault epb cat_l3 cdp_l3 invpcid_single ssbd mba ibrs ibpb stibp
-ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1
-hle avx2 smep bmi2 erms invpcid rtm cqm mpx rdt_a avx512f avx512dq rdseed adx
-smap clflushopt clwb intel_pt avx512cd avx512bw avx512vl xsaveopt xsavec xgetbv1
-xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local dtherm ida arat pln pts
-pku ospke avx512_vnni md_clear flush_l1d arch_capabilities
-```
-
-```
-$ lscpu
-Architecture: x86_64
-CPU op-mode(s): 32-bit, 64-bit
-Byte Order: Little Endian
-CPU(s): 96
-On-line CPU(s) list: 0-95
-Thread(s) per core: 2
-Core(s) per socket: 24
-Socket(s): 2
-NUMA node(s): 2
-Vendor ID: GenuineIntel
-CPU family: 6
-Model: 85
-Model name: Intel(R) Xeon(R) Gold 6252N CPU @ 2.30GHz
-Stepping: 7
-CPU MHz: 3000.989
-BogoMIPS: 4600.00
-Virtualization: VT-x
-L1d cache: 32K
-L1i cache: 32K
-L2 cache: 1024K
-L3 cache: 36608K
-NUMA node0 CPU(s): 0-23,48-71
-NUMA node1 CPU(s): 24-47,72-95
-Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
-cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx
-pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology
-nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2
-ssse3 sdbg fma cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt
-tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch
-cpuid_fault epb cat_l3 cdp_l3 invpcid_single ssbd mba ibrs ibpb stibp
-ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 hle
-avx2 smep bmi2 erms invpcid rtm cqm mpx rdt_a avx512f avx512dq rdseed adx smap
-clflushopt clwb intel_pt avx512cd avx512bw avx512vl xsaveopt xsavec xgetbv1
-xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local dtherm ida arat pln pts
-pku ospke avx512_vnni md_clear flush_l1d arch_capabilities
-```
-
-## Linux dmidecode
-
-```
- # dmidecode 3.1
- Getting SMBIOS data from sysfs.
- SMBIOS 3.1.2 present.
- Table at 0x6EB92000.
-
- Handle 0x0000, DMI type 0, 26 bytes
- BIOS Information
- Vendor: American Megatrends Inc.
- Version: 3.0c
- Release Date: 03/27/2019
- Address: 0xF0000
- Runtime Size: 64 kB
- ROM Size: 32 MB
- Characteristics:
- PCI is supported
- BIOS is upgradeable
- BIOS shadowing is allowed
- Boot from CD is supported
- Selectable boot is supported
- BIOS ROM is socketed
- EDD is supported
- 5.25"/1.2 MB floppy services are supported (int 13h)
- 3.5"/720 kB floppy services are supported (int 13h)
- 3.5"/2.88 MB floppy services are supported (int 13h)
- Print screen service is supported (int 5h)
- Serial services are supported (int 14h)
- Printer services are supported (int 17h)
- ACPI is supported
- USB legacy is supported
- BIOS boot specification is supported
- Targeted content distribution is supported
- UEFI is supported
- BIOS Revision: 5.14
-
- Handle 0x0001, DMI type 1, 27 bytes
- System Information
- Manufacturer: Supermicro
- Product Name: SYS-7049GP-TRT
- Version: 0123456789
- Serial Number: S291427X9525476
- UUID: 00000000-0000-0000-0000-AC1F6BACD7BA
- Wake-up Type: Power Switch
- SKU Number: To be filled by O.E.M.
- Family: To be filled by O.E.M.
-
- Handle 0x0002, DMI type 2, 15 bytes
- Base Board Information
- Manufacturer: Supermicro
- Product Name: X11DPG-QT
- Version: 1.10A
- Serial Number: VM189S007860
- Asset Tag: To be filled by O.E.M.
- Features:
- Board is a hosting board
- Board is replaceable
- Location In Chassis: To be filled by O.E.M.
- Chassis Handle: 0x0003
- Type: Motherboard
- Contained Object Handles: 0
-
- Handle 0x0003, DMI type 3, 22 bytes
- Chassis Information
- Manufacturer: Supermicro
- Type: Other
- Lock: Not Present
- Version: 0123456789
- Serial Number: C7470KH37A30566
- Asset Tag: To be filled by O.E.M.
- Boot-up State: Safe
- Power Supply State: Safe
- Thermal State: Safe
- Security Status: None
- OEM Information: 0x00000000
- Height: Unspecified
- Number Of Power Cords: 1
- Contained Elements: 0
- SKU Number: To be filled by O.E.M.
-
- Handle 0x0055, DMI type 4, 48 bytes
- Processor Information
- Socket Designation: CPU1
- Type: Central Processor
- Family: Xeon
- Manufacturer: Intel(R) Corporation
- ID: 57 06 05 00 FF FB EB BF
- Signature: Type 0, Family 6, Model 85, Stepping 7
- Flags:
- FPU (Floating-point unit on-chip)
- VME (Virtual mode extension)
- DE (Debugging extension)
- PSE (Page size extension)
- TSC (Time stamp counter)
- MSR (Model specific registers)
- PAE (Physical address extension)
- MCE (Machine check exception)
- CX8 (CMPXCHG8 instruction supported)
- APIC (On-chip APIC hardware supported)
- SEP (Fast system call)
- MTRR (Memory type range registers)
- PGE (Page global enable)
- MCA (Machine check architecture)
- CMOV (Conditional move instruction supported)
- PAT (Page attribute table)
- PSE-36 (36-bit page size extension)
- CLFSH (CLFLUSH instruction supported)
- DS (Debug store)
- ACPI (ACPI supported)
- MMX (MMX technology supported)
- FXSR (FXSAVE and FXSTOR instructions supported)
- SSE (Streaming SIMD extensions)
- SSE2 (Streaming SIMD extensions 2)
- SS (Self-snoop)
- HTT (Multi-threading)
- TM (Thermal monitor supported)
- PBE (Pending break enabled)
- Version: Intel(R) Xeon(R) Gold 6252N CPU @ 2.30GHz
- Voltage: 1.6 V
- External Clock: 100 MHz
- Max Speed: 4500 MHz
- Current Speed: 2300 MHz
- Status: Populated, Enabled
- Upgrade: Socket LGA3647-1
- L1 Cache Handle: 0x0052
- L2 Cache Handle: 0x0053
- L3 Cache Handle: 0x0054
- Serial Number: Not Specified
- Asset Tag: UNKNOWN
- Part Number: Not Specified
- Core Count: 24
- Core Enabled: 24
- Thread Count: 48
- Characteristics:
- 64-bit capable
- Multi-Core
- Hardware Thread
- Execute Protection
- Enhanced Virtualization
- Power/Performance Control
-
- Handle 0x0059, DMI type 4, 48 bytes
- Processor Information
- Socket Designation: CPU2
- Type: Central Processor
- Family: Xeon
- Manufacturer: Intel(R) Corporation
- ID: 57 06 05 00 FF FB EB BF
- Signature: Type 0, Family 6, Model 85, Stepping 7
- Flags:
- FPU (Floating-point unit on-chip)
- VME (Virtual mode extension)
- DE (Debugging extension)
- PSE (Page size extension)
- TSC (Time stamp counter)
- MSR (Model specific registers)
- PAE (Physical address extension)
- MCE (Machine check exception)
- CX8 (CMPXCHG8 instruction supported)
- APIC (On-chip APIC hardware supported)
- SEP (Fast system call)
- MTRR (Memory type range registers)
- PGE (Page global enable)
- MCA (Machine check architecture)
- CMOV (Conditional move instruction supported)
- PAT (Page attribute table)
- PSE-36 (36-bit page size extension)
- CLFSH (CLFLUSH instruction supported)
- DS (Debug store)
- ACPI (ACPI supported)
- MMX (MMX technology supported)
- FXSR (FXSAVE and FXSTOR instructions supported)
- SSE (Streaming SIMD extensions)
- SSE2 (Streaming SIMD extensions 2)
- SS (Self-snoop)
- HTT (Multi-threading)
- TM (Thermal monitor supported)
- PBE (Pending break enabled)
- Version: Intel(R) Xeon(R) Gold 6252N CPU @ 2.30GHz
- Voltage: 1.6 V
- External Clock: 100 MHz
- Max Speed: 4500 MHz
- Current Speed: 2300 MHz
- Status: Populated, Enabled
- Upgrade: Socket LGA3647-1
- L1 Cache Handle: 0x0056
- L2 Cache Handle: 0x0057
- L3 Cache Handle: 0x0058
- Serial Number: Not Specified
- Asset Tag: UNKNOWN
- Part Number: Not Specified
- Core Count: 24
- Core Enabled: 24
- Thread Count: 48
- Characteristics:
- 64-bit capable
- Multi-Core
- Hardware Thread
- Execute Protection
- Enhanced Virtualization
- Power/Performance Control
-```
-
-## Linux dmidecode pci
-
-```
- $ dmidecode -t slot
- Handle 0x000B, DMI type 9, 17 bytes
- System Slot Information
- Designation: CPU1 SLOT2 PCI-E 3.0 X16
- Type: x16 PCI Express 3 x16
- Current Usage: In Use
- Length: Long
- ID: 2
- Characteristics:
- 3.3 V is provided
- Opening is shared
- PME signal is supported
- Bus Address: 0000:18:00.0
-
- Handle 0x000C, DMI type 9, 17 bytes
- System Slot Information
- Designation: CPU1 SLOT4 PCI-E 3.0 X16
- Type: x16 PCI Express 3 x16
- Current Usage: In Use
- Length: Short
- ID: 4
- Characteristics:
- 3.3 V is provided
- Opening is shared
- PME signal is supported
- Bus Address: 0000:3b:00.0
-
- Handle 0x000D, DMI type 9, 17 bytes
- System Slot Information
- Designation: CPU2 SLOT6 PCI-E 3.0 X16
- Type: x16 PCI Express 3 x16
- Current Usage: Available
- Length: Short
- ID: 6
- Characteristics:
- 3.3 V is provided
- Opening is shared
- PME signal is supported
- Bus Address: 0000:ff:00.0
-
- Handle 0x000E, DMI type 9, 17 bytes
- System Slot Information
- Designation: CPU2 SLOT8 PCI-E 3.0 X16
- Type: x16 PCI Express 3 x16
- Current Usage: Available
- Length: Short
- ID: 8
- Characteristics:
- 3.3 V is provided
- Opening is shared
- PME signal is supported
- Bus Address: 0000:ff:00.0
-
- Handle 0x000F, DMI type 9, 17 bytes
- System Slot Information
- Designation: CPU1 SLOT9 PCI-E 3.0 X16
- Type: x16 PCI Express 3 x16
- Current Usage: Available
- Length: Short
- ID: 9
- Characteristics:
- 3.3 V is provided
- Opening is shared
- PME signal is supported
- Bus Address: 0000:ff:00.0
-
- Handle 0x0010, DMI type 9, 17 bytes
- System Slot Information
- Designation: CPU2 SLOT10 PCI-E 3.0 X16
- Type: x16 PCI Express 3 x16
- Current Usage: Available
- Length: Short
- ID: 10
- Characteristics:
- 3.3 V is provided
- Opening is shared
- PME signal is supported
- Bus Address: 0000:ff:00.0
-
- Handle 0x0011, DMI type 9, 17 bytes
- System Slot Information
- Designation: CPU2 SLOT11 PCI-E 3.0 X4(IN X8)
- Type: x4 PCI Express 3 x8
- Current Usage: Available
- Length: Short
- ID: 11
- Characteristics:
- 3.3 V is provided
- Opening is shared
- PME signal is supported
- Bus Address: 0000:ff:00.0
-
- Handle 0x0012, DMI type 9, 17 bytes
- System Slot Information
- Designation: M.2 CONNECTOR
- Type: x4 M.2 Socket 2
- Current Usage: Available
- Length: Short
- Characteristics:
- 3.3 V is provided
- Opening is shared
- PME signal is supported
- Bus Address: 0000:ff:00.0
-```
-
-## Linux dmidecode memory
-
-```
- $ dmidecode -t memory
- Handle 0x0021, DMI type 16, 23 bytes
- Physical Memory Array
- Location: System Board Or Motherboard
- Use: System Memory
- Error Correction Type: Single-bit ECC
- Maximum Capacity: 2304 GB
- Error Information Handle: Not Provided
- Number Of Devices: 4
-
- Handle 0x0023, DMI type 17, 84 bytes
- Memory Device
- Array Handle: 0x0021
- Error Information Handle: Not Provided
- Total Width: 72 bits
- Data Width: 64 bits
- Size: 16384 MB
- Form Factor: DIMM
- Set: None
- Locator: P1-DIMMA1
- Bank Locator: P0_Node0_Channel0_Dimm0
- Type: DDR4
- Type Detail: Synchronous
- Speed: 2933 MT/s
- Manufacturer: SK Hynix
- Serial Number: 93275F0E
- Asset Tag: P1-DIMMA1_AssetTag (date:19/22)
- Part Number: HMA82GR7CJR8N-WM
- Rank: 2
- Configured Clock Speed: 2934 MT/s
- Minimum Voltage: 1.2 V
- Maximum Voltage: 1.2 V
- Configured Voltage: 1.2 V
-
- Handle 0x0024, DMI type 17, 84 bytes
- Memory Device
- Array Handle: 0x0021
- Error Information Handle: Not Provided
- Total Width: Unknown
- Data Width: Unknown
- Size: No Module Installed
- Form Factor: DIMM
- Set: None
- Locator: P1-DIMMA2
- Bank Locator: P0_Node0_Channel0_Dimm1
- Type: Unknown
- Type Detail: Unknown
- Speed: Unknown
- Manufacturer: NO DIMM
- Serial Number: NO DIMM
- Asset Tag: NO DIMM
- Part Number: NO DIMM
- Rank: Unknown
- Configured Clock Speed: Unknown
- Minimum Voltage: 1.2 V
- Maximum Voltage: 1.2 V
- Configured Voltage: 1.2 V
-
- Handle 0x0025, DMI type 17, 84 bytes
- Memory Device
- Array Handle: 0x0021
- Error Information Handle: Not Provided
- Total Width: 72 bits
- Data Width: 64 bits
- Size: 16384 MB
- Form Factor: DIMM
- Set: None
- Locator: P1-DIMMB1
- Bank Locator: P0_Node0_Channel1_Dimm0
- Type: DDR4
- Type Detail: Synchronous
- Speed: 2933 MT/s
- Manufacturer: SK Hynix
- Serial Number: 93275F1F
- Asset Tag: P1-DIMMB1_AssetTag (date:19/22)
- Part Number: HMA82GR7CJR8N-WM
- Rank: 2
- Configured Clock Speed: 2934 MT/s
- Minimum Voltage: 1.2 V
- Maximum Voltage: 1.2 V
- Configured Voltage: 1.2 V
-
- Handle 0x0027, DMI type 17, 84 bytes
- Memory Device
- Array Handle: 0x0021
- Error Information Handle: Not Provided
- Total Width: 72 bits
- Data Width: 64 bits
- Size: 16384 MB
- Form Factor: DIMM
- Set: None
- Locator: P1-DIMMC1
- Bank Locator: P0_Node0_Channel2_Dimm0
- Type: DDR4
- Type Detail: Synchronous
- Speed: 2933 MT/s
- Manufacturer: SK Hynix
- Serial Number: 93275F07
- Asset Tag: P1-DIMMC1_AssetTag (date:19/22)
- Part Number: HMA82GR7CJR8N-WM
- Rank: 2
- Configured Clock Speed: 2934 MT/s
- Minimum Voltage: 1.2 V
- Maximum Voltage: 1.2 V
- Configured Voltage: 1.2 V
-
- Handle 0x002B, DMI type 17, 84 bytes
- Memory Device
- Array Handle: 0x0029
- Error Information Handle: Not Provided
- Total Width: 72 bits
- Data Width: 64 bits
- Size: 16384 MB
- Form Factor: DIMM
- Set: None
- Locator: P1-DIMMD1
- Bank Locator: P0_Node1_Channel0_Dimm0
- Type: DDR4
- Type Detail: Synchronous
- Speed: 2933 MT/s
- Manufacturer: SK Hynix
- Serial Number: 93275F02
- Asset Tag: P1-DIMMD1_AssetTag (date:19/22)
- Part Number: HMA82GR7CJR8N-WM
- Rank: 2
- Configured Clock Speed: 2934 MT/s
- Minimum Voltage: 1.2 V
- Maximum Voltage: 1.2 V
- Configured Voltage: 1.2 V
-
- Handle 0x002C, DMI type 17, 84 bytes
- Memory Device
- Array Handle: 0x0029
- Error Information Handle: Not Provided
- Total Width: Unknown
- Data Width: Unknown
- Size: No Module Installed
- Form Factor: DIMM
- Set: None
- Locator: P1-DIMMD2
- Bank Locator: P0_Node1_Channel0_Dimm1
- Type: Unknown
- Type Detail: Unknown
- Speed: Unknown
- Manufacturer: NO DIMM
- Serial Number: NO DIMM
- Asset Tag: NO DIMM
- Part Number: NO DIMM
- Rank: Unknown
- Configured Clock Speed: Unknown
- Minimum Voltage: 1.2 V
- Maximum Voltage: 1.2 V
- Configured Voltage: 1.2 V
-
- Handle 0x002D, DMI type 17, 84 bytes
- Memory Device
- Array Handle: 0x0029
- Error Information Handle: Not Provided
- Total Width: 72 bits
- Data Width: 64 bits
- Size: 16384 MB
- Form Factor: DIMM
- Set: None
- Locator: P1-DIMME1
- Bank Locator: P0_Node1_Channel1_Dimm0
- Type: DDR4
- Type Detail: Synchronous
- Speed: 2933 MT/s
- Manufacturer: SK Hynix
- Serial Number: 93275F19
- Asset Tag: P1-DIMME1_AssetTag (date:19/22)
- Part Number: HMA82GR7CJR8N-WM
- Rank: 2
- Configured Clock Speed: 2934 MT/s
- Minimum Voltage: 1.2 V
- Maximum Voltage: 1.2 V
- Configured Voltage: 1.2 V
-
- Handle 0x002F, DMI type 17, 84 bytes
- Memory Device
- Array Handle: 0x0029
- Error Information Handle: Not Provided
- Total Width: 72 bits
- Data Width: 64 bits
- Size: 16384 MB
- Form Factor: DIMM
- Set: None
- Locator: P1-DIMMF1
- Bank Locator: P0_Node1_Channel2_Dimm0
- Type: DDR4
- Type Detail: Synchronous
- Speed: 2933 MT/s
- Manufacturer: SK Hynix
- Serial Number: 93275FD3
- Asset Tag: P1-DIMMF1_AssetTag (date:19/22)
- Part Number: HMA82GR7CJR8N-WM
- Rank: 2
- Configured Clock Speed: 2934 MT/s
- Minimum Voltage: 1.2 V
- Maximum Voltage: 1.2 V
- Configured Voltage: 1.2 V
-
- Handle 0x0031, DMI type 16, 23 bytes
- Physical Memory Array
- Location: System Board Or Motherboard
- Use: System Memory
- Error Correction Type: Single-bit ECC
- Maximum Capacity: 2304 GB
- Error Information Handle: Not Provided
- Number Of Devices: 4
-
- Handle 0x0033, DMI type 17, 84 bytes
- Memory Device
- Array Handle: 0x0031
- Error Information Handle: Not Provided
- Total Width: 72 bits
- Data Width: 64 bits
- Size: 16384 MB
- Form Factor: DIMM
- Set: None
- Locator: P2-DIMMA1
- Bank Locator: P1_Node0_Channel0_Dimm0
- Type: DDR4
- Type Detail: Synchronous
- Speed: 2933 MT/s
- Manufacturer: SK Hynix
- Serial Number: 93275FE2
- Asset Tag: P2-DIMMA1_AssetTag (date:19/22)
- Part Number: HMA82GR7CJR8N-WM
- Rank: 2
- Configured Clock Speed: 2934 MT/s
- Minimum Voltage: 1.2 V
- Maximum Voltage: 1.2 V
- Configured Voltage: 1.2 V
-
- Handle 0x0034, DMI type 17, 84 bytes
- Memory Device
- Array Handle: 0x0031
- Error Information Handle: Not Provided
- Total Width: Unknown
- Data Width: Unknown
- Size: No Module Installed
- Form Factor: DIMM
- Set: None
- Locator: P2-DIMMA2
- Bank Locator: P1_Node0_Channel0_Dimm1
- Type: Unknown
- Type Detail: Unknown
- Speed: Unknown
- Manufacturer: NO DIMM
- Serial Number: NO DIMM
- Asset Tag: NO DIMM
- Part Number: NO DIMM
- Rank: Unknown
- Configured Clock Speed: Unknown
- Minimum Voltage: 1.2 V
- Maximum Voltage: 1.2 V
- Configured Voltage: 1.2 V
-
- Handle 0x0035, DMI type 17, 84 bytes
- Memory Device
- Array Handle: 0x0031
- Error Information Handle: Not Provided
- Total Width: 72 bits
- Data Width: 64 bits
- Size: 16384 MB
- Form Factor: DIMM
- Set: None
- Locator: P2-DIMMB1
- Bank Locator: P1_Node0_Channel1_Dimm0
- Type: DDR4
- Type Detail: Synchronous
- Speed: 2933 MT/s
- Manufacturer: SK Hynix
- Serial Number: 93276001
- Asset Tag: P2-DIMMB1_AssetTag (date:19/22)
- Part Number: HMA82GR7CJR8N-WM
- Rank: 2
- Configured Clock Speed: 2934 MT/s
- Minimum Voltage: 1.2 V
- Maximum Voltage: 1.2 V
- Configured Voltage: 1.2 V
-
- Handle 0x0037, DMI type 17, 84 bytes
- Memory Device
- Array Handle: 0x0031
- Error Information Handle: Not Provided
- Total Width: 72 bits
- Data Width: 64 bits
- Size: 16384 MB
- Form Factor: DIMM
- Set: None
- Locator: P2-DIMMC1
- Bank Locator: P1_Node0_Channel2_Dimm0
- Type: DDR4
- Type Detail: Synchronous
- Speed: 2933 MT/s
- Manufacturer: SK Hynix
- Serial Number: 93276005
- Asset Tag: P2-DIMMC1_AssetTag (date:19/22)
- Part Number: HMA82GR7CJR8N-WM
- Rank: 2
- Configured Clock Speed: 2934 MT/s
- Minimum Voltage: 1.2 V
- Maximum Voltage: 1.2 V
- Configured Voltage: 1.2 V
-
- Handle 0x0039, DMI type 16, 23 bytes
- Physical Memory Array
- Location: System Board Or Motherboard
- Use: System Memory
- Error Correction Type: Single-bit ECC
- Maximum Capacity: 2304 GB
- Error Information Handle: Not Provided
- Number Of Devices: 4
-
- Handle 0x003B, DMI type 17, 84 bytes
- Memory Device
- Array Handle: 0x0039
- Error Information Handle: Not Provided
- Total Width: 72 bits
- Data Width: 64 bits
- Size: 16384 MB
- Form Factor: DIMM
- Set: None
- Locator: P2-DIMMD1
- Bank Locator: P1_Node1_Channel0_Dimm0
- Type: DDR4
- Type Detail: Synchronous
- Speed: 2933 MT/s
- Manufacturer: SK Hynix
- Serial Number: 93275F44
- Asset Tag: P2-DIMMD1_AssetTag (date:19/22)
- Part Number: HMA82GR7CJR8N-WM
- Rank: 2
- Configured Clock Speed: 2934 MT/s
- Minimum Voltage: 1.2 V
- Maximum Voltage: 1.2 V
- Configured Voltage: 1.2 V
-
- Handle 0x003C, DMI type 17, 84 bytes
- Memory Device
- Array Handle: 0x0039
- Error Information Handle: Not Provided
- Total Width: Unknown
- Data Width: Unknown
- Size: No Module Installed
- Form Factor: DIMM
- Set: None
- Locator: P2-DIMMD2
- Bank Locator: P1_Node1_Channel0_Dimm1
- Type: Unknown
- Type Detail: Unknown
- Speed: Unknown
- Manufacturer: NO DIMM
- Serial Number: NO DIMM
- Asset Tag: NO DIMM
- Part Number: NO DIMM
- Rank: Unknown
- Configured Clock Speed: Unknown
- Minimum Voltage: 1.2 V
- Maximum Voltage: 1.2 V
- Configured Voltage: 1.2 V
-
- Handle 0x003D, DMI type 17, 84 bytes
- Memory Device
- Array Handle: 0x0039
- Error Information Handle: Not Provided
- Total Width: 72 bits
- Data Width: 64 bits
- Size: 16384 MB
- Form Factor: DIMM
- Set: None
- Locator: P2-DIMME1
- Bank Locator: P1_Node1_Channel1_Dimm0
- Type: DDR4
- Type Detail: Synchronous
- Speed: 2933 MT/s
- Manufacturer: SK Hynix
- Serial Number: 93275FDF
- Asset Tag: P2-DIMME1_AssetTag (date:19/22)
- Part Number: HMA82GR7CJR8N-WM
- Rank: 2
- Configured Clock Speed: 2934 MT/s
- Minimum Voltage: 1.2 V
- Maximum Voltage: 1.2 V
- Configured Voltage: 1.2 V
-
- Handle 0x003F, DMI type 17, 84 bytes
- Memory Device
- Array Handle: 0x0039
- Error Information Handle: Not Provided
- Total Width: 72 bits
- Data Width: 64 bits
- Size: 16384 MB
- Form Factor: DIMM
- Set: None
- Locator: P2-DIMMF1
- Bank Locator: P1_Node1_Channel2_Dimm0
- Type: DDR4
- Type Detail: Synchronous
- Speed: 2933 MT/s
- Manufacturer: SK Hynix
- Serial Number: 93275FDD
- Asset Tag: P2-DIMMF1_AssetTag (date:19/22)
- Part Number: HMA82GR7CJR8N-WM
- Rank: 2
- Configured Clock Speed: 2934 MT/s
- Minimum Voltage: 1.2 V
- Maximum Voltage: 1.2 V
- Configured Voltage: 1.2 V
-```
-
-## Xeon CLX Server BIOS Configuration - TG
-
-### Boot Feature
-
-```
- | Quiet Boot [Enabled] |Boot option |
- | | |
- | Option ROM Messages [Force BIOS] | |
- | Bootup NumLock State [On] | |
- | Wait For "F1" If Error [Enabled] | |
- | INT19 Trap Response [Immediate] | |
- | Re-try Boot [Disabled] | |
- | Install Windows 7 USB support [Disabled] | |
- | Port 61h Bit-4 Emulation [Disabled] | |
- | | |
- | Power Configuration | |
- | Watch Dog Function [Disabled] | |
- | Restore on AC Power Loss [Last State] | |
- | Power Button Function [Instant Off] | |
-```
-
-### CPU Configuration
-
-```
- | Processor Configuration ^|Enables Hyper Threading |
- | -------------------------------------------------- *|(Software Method to |
- | Processor BSP Revision 50657 - CLX B1 *|Enable/Disable Logical |
- | Processor Socket CPU1 | CPU2 *|Processor threads. |
- | Processor ID 00050657* | 00050657 *| |
- | Processor Frequency 2.700GHz | 2.700GHz *| |
- | Processor Max Ratio 1BH | 1BH *| |
- | Processor Min Ratio 0AH | 0AH *| |
- | Microcode Revision 0500002C | 0500002C *| |
- | L1 Cache RAM 64KB | 64KB *| |
- | L2 Cache RAM 1024KB | 1024KB *| |
- | L3 Cache RAM 39424KB | 39424KB *| |
- | Processor 0 Version *| |
- | Intel(R) Xeon(R) Platinum 8280 CPU @ 2.70GHz *| |
- | Processor 1 Version *| |
- | Intel(R) Xeon(R) Platinum 8280 CPU @ 2.70GHz *| |
- | *|-----------------------------|
- | Hyper-Threading [ALL] [Enable] *|><: Select Screen |
- | Cores Enabled 0 *|^v: Select Item |
- | Monitor/Mwait [Auto] *|Enter: Select |
- | Execute Disable Bit [Enable] +|+/-: Change Opt. |
- | Intel Virtualization Technology [Enable] +|F1: General Help |
- | PPIN Control [Unlock/Enable] +|F2: Previous Values |
- | Hardware Prefetcher [Enable] +|F3: Optimized Defaults |
- | Adjacent Cache Prefetch [Enable] v|F4: Save & Exit |
- | DCU Streamer Prefetcher [Enable] | |
- | DCU IP Prefetcher [Enable] | |
- | LLC Prefetch [Disable] | |
- | Extended APIC [Disable] | |
- | AES-NI [Enable] | |
- |> Advanced Power Management Configuration | |
-```
-
-#### Advanced Power Management Configuration
-
-```
- | Advanced Power Management Configuration |Switch CPU Power Management |
- | -------------------------------------------------- |profile |
- | Power Technology [Custom] | |
- | Power Performance Tuning [BIOS Controls EPB] | |
- | ENERGY_PERF_BIAS_CFG mode [Maximum Performance] | |
- |> CPU P State Control | |
- |> Hardware PM State Control | |
- |> CPU C State Control | |
- |> Package C State Control | |
- |> CPU T State Control | |
-```
-
-##### CPU P State Control
-
-```
- | CPU P State Control |EIST allows the processor |
- | |to dynamically adjust |
- | SpeedStep (P-States) [Disable] |frequency and voltage based |
- | EIST PSD Function [HW_ALL] |on power versus performance |
- | |needs. |
- | | |
-```
-
-##### Hardware PM State Control
-
-```
- | Hardware PM State Control |If set to Disable, hardware ^|
- | |will choose a P-state *|
- | Hardware P-States [Disable] |setting for the system *|
- | |based on an OS request. *|
- | |If set to Native Mode, *|
- | |hardware will choose a *|
- | |P-state setting based on OS *|
- | |guidance. *|
- | |If set to Native Mode with *|
- | |No Legacy Support, hardware *|
- | |will choose a P-state *|
- | |setting independently *|
- | |without OS guidance. +|
- | |If set to Out of Band Mode, +|
- | |hardware autonomously v|
-```
-
-##### CPU C State Control
-
-```
- | CPU C State Control |Select Enable to support |
- | |Autonomous Core C-State |
- | Autonomous Core C-State [Disable] |control which will allow |
- | CPU C6 report [Disable] |the processor core to |
- | Enhanced Halt State (C1E) [Disable] |control its C-State setting |
- | |automatically and |
- | |independently. |
-```
-
-##### Package C State Control
-
-```
- | Package C State Control |Limit the lowest package |
- | |level C-State to |
- | Package C State [C0/C1 state] |processors. Lower package |
- | |C-State lower processor |
- | |power consumption upon idle. |
-```
-
-##### CPU T State Control
-
-```
- | CPU T State Control |Enable/Disable CPU |
- | |throttling by OS. |
- | Software Controlled T-States [Disable] |Throttling reduces power |
- | |consumption |
-```
-
-#### Chipset Configuration
-
-```
- | WARNING: Setting wrong values in below sections may cause |North Bridge Parameters |
- | system to malfunction. | |
- |> North Bridge | |
- |> South Bridge | |
-```
-
-##### North Bridge
-
-```
- |> UPI Configuration |Displays and provides |
- |> Memory Configuration |option to change the UPI |
- |> IIO Configuration |Settings |
-```
-
-##### UPI Configuration
-
-```
- | UPI Configuration |Use this feature to select |
- | -------------------------------------------------- |the degrading precedence |
- | Number of CPU 2 |option for Ultra Path |
- | Number of Active UPI Link 3 |Interconnect connections. |
- | Current UPI Link Speed Fast |Select Topology Precedent |
- | Current UPI Link Frequency 10.4 GT/s |to degrade UPI features if |
- | UPI Global MMIO Low Base / Limit 90000000 / FBFFFFFF |system options are in |
- | UPI Global MMIO High Base / Limit 0000000000000000 / |conflict. Select Feature |
- | 00000000FFFFFFFF |Precedent to degrade UPI |
- | UPI Pci-e Configuration Base / Size 80000000 / 10000000 |topology if system options |
- | Degrade Precedence [Topology Precedence] |are in conflict. |
- | Link L0p Enable [Disable] | |
- | Link L1 Enable [Disable] | |
- | IO Directory Cache (IODC) [Auto] | |
- | SNC [Disable] | |
- | XPT Prefetch [Disable] | |
- | KTI Prefetch [Enable] |-----------------------------|
- | Local/Remote Threshold [Auto] |><: Select Screen |
- | Stale AtoS [Auto] |^v: Select Item |
- | LLC Dead Line Alloc [Enable] |Enter: Select |
- | Isoc Mode [Auto] |+/-: Change Opt. |
-```
-
-##### Memory Configuration
-
-```
- | |Select POR to enforce POR |
- | -------------------------------------------------- |restrictions for DDR4 |
- | Integrated Memory Controller (iMC) |frequency and voltage |
- | -------------------------------------------------- |programming |
- | | |
- | Enforce POR [POR] | |
- | PPR Type [Hard PPR] | |
- | Enhanced PPR [Disable] | |
- | Operation Mode [Test and Repair] | |
- | Memory Frequency [2933] | |
- | Data Scrambling for DDR4 [Auto] | |
- | tCCD_L Relaxation [Auto] | |
- | tRWSR Relaxation [Disable] | |
- | tRFC Optimization for 16Gb Based DIMM [Force 550ns] | |
- | 2x Refresh [Auto] | |
- | Page Policy [Auto] | |
- | IMC Interleaving [2-way Interleave] |-----------------------------|
- |> Memory Topology |><: Select Screen |
- |> Memory RAS Configuration |^v: Select Item |
-```
-
-##### IIO Configuration
-
-```
- | IIO Configuration |Expose IIO DFX devices and |
- | -------------------------------------------------- |other CPU devices like PMON |
- | | |
- | EV DFX Features [Disable] | |
- |> CPU1 Configuration | |
- |> CPU2 Configuration | |
- |> IOAT Configuration | |
- |> Intel. VT for Directed I/O (VT-d) | |
- |> Intel. VMD technology | |
- | | |
- | IIO-PCIE Express Global Options | |
- | ======================================== | |
- | PCI-E Completion Timeout Disable [No] | |
-```
-
-##### CPU1 Configuration
-
-```
- | IOU0 (IIO PCIe Br1) [Auto] |Selects PCIe port |
- | IOU1 (IIO PCIe Br2) [Auto] |Bifurcation for selected |
- | IOU2 (IIO PCIe Br3) [Auto] |slot(s) |
- |> CPU1 SLOT2 PCI-E 3.0 X16 | |
- |> CPU1 SLOT4 PCI-E 3.0 X16 | |
- |> CPU1 SLOT9 PCI-E 3.0 X16 | |
-```
-
-##### CPU2 Configuration
-
-```
- | IOU0 (IIO PCIe Br1) [Auto] |Selects PCIe port |
- | IOU1 (IIO PCIe Br2) [Auto] |Bifurcation for selected |
- | IOU2 (IIO PCIe Br3) [Auto] |slot(s) |
- |> CPU2 SLOT6 PCI-E 3.0 X16 | |
- |> CPU2 SLOT8 PCI-E 3.0 X16 | |
- |> CPU2 SLOT10 PCI-E 3.0 X16 | |
-```
-
-#### South Bridge
-
-```
- | |Enables Legacy USB support. |
- | USB Module Version 21 |AUTO option disables legacy |
- | |support if no USB devices |
- | USB Devices: |are connected. DISABLE |
- | 1 Keyboard, 1 Mouse, 1 Hub |option will keep USB |
- | |devices available only for |
- | Legacy USB Support [Enabled] |EFI applications. |
- | XHCI Hand-off [Enabled] | |
- | Port 60/64 Emulation [Enabled] | |
- | PCIe PLL SSC [Disable] | |
- | Real USB Wake Up [Enabled] | |
- | Front USB Wake Up [Enabled] | |
- | | |
- | Azalia [Auto] | |
- | Azalia PME Enable [Disabled] | |
-```
-
-### PCIe/PCI/PnP Configuration
-
-```
- | PCI Bus Driver Version A5.01.18 ^|Enables or Disables 64bit |
- | *|capable Devices to be |
- | PCI Devices Common Settings: *|Decoded in Above 4G Address |
- | Above 4G Decoding [Enabled] *|Space (Only if System |
- | SR-IOV Support [Enabled] *|Supports 64 bit PCI |
- | ARI Support [Enabled] *|Decoding). |
- | MMIO High Base [56T] *| |
- | MMIO High Granularity Size [256G] *| |
- | Maximum Read Request [Auto] *| |
- | MMCFG Base [2G] *| |
- | NVMe Firmware Source [Vendor Defined *| |
- | Firmware] *| |
- | VGA Priority [Onboard] *| |
- | CPU1 SLOT2 PCI-E 3.0 X16 OPROM [Legacy] *| |
- | CPU1 SLOT4 PCI-E 3.0 X16 OPROM [Legacy] *| |
- | CPU2 SLOT6 PCI-E 3.0 X16 OPROM [Legacy] *| |
- | CPU2 SLOT8 PCI-E 3.0 X16 OPROM [Legacy] *|-----------------------------|
- | CPU1 SLOT9 PCI-E 3.0 X16 OPROM [Legacy] *|><: Select Screen |
- | CPU2 SLOT10 PCI-E 3.0 X16 OPROM [Legacy] *|^v: Select Item |
- | CPU2 SLOT11 PCI-E 3.0 X4(IN X8) OPROM [Legacy] *|Enter: Select |
- | M.2 CONNECTOR OPROM [Legacy] *|+/-: Change Opt. |
- | Bus Master Enable [Enabled] +|F1: General Help |
- | Onboard LAN1 Option ROM [Legacy] +|F2: Previous Values |
- | Onboard LAN2 Option ROM [Disabled] +|F3: Optimized Defaults |
- | Onboard Video Option ROM [Legacy] v|F4: Save & Exit |
- |> Network Stack Configuration | |
-```
-
-### ACPI Settings
-
-```
- | ACPI Settings |Enable or Disable Non |
- | |uniform Memory Access |
- | NUMA [Enabled] |(NUMA). |
- | WHEA Support [Enabled] | |
- | High Precision Event Timer [Enabled] | |
-```
-
-## Xeon CLX Server BIOS Configuration - DUT
-
-### Boot Feature
-
-```
- | Quiet Boot [Enabled] |Boot option |
- | | |
- | Option ROM Messages [Force BIOS] | |
- | Bootup NumLock State [On] | |
- | Wait For "F1" If Error [Enabled] | |
- | INT19 Trap Response [Immediate] | |
- | Re-try Boot [Disabled] | |
- | Install Windows 7 USB support [Disabled] | |
- | Port 61h Bit-4 Emulation [Disabled] | |
- | | |
- | Power Configuration | |
- | Watch Dog Function [Disabled] | |
- | Restore on AC Power Loss [Last State] | |
- | Power Button Function [Instant Off] | |
-```
-
-### CPU Configuration
-
-```
- |--------------------------------------------------------------------+-----------------------------\
- | Processor Configuration ^|Enables Hyper Threading |
- | -------------------------------------------------- *|(Software Method to |
- | Processor BSP Revision 50657 - CLX B1 *|Enable/Disable Logical |
- | Processor Socket CPU1 | CPU2 *|Processor threads. |
- | Processor ID 00050657* | 00050657 *| |
- | Processor Frequency 2.300GHz | 2.300GHz *| |
- | Processor Max Ratio 17H | 17H *| |
- | Processor Min Ratio 0AH | 0AH *| |
- | Microcode Revision 0500002C | 0500002C *| |
- | L1 Cache RAM 64KB | 64KB *| |
- | L2 Cache RAM 1024KB | 1024KB *| |
- | L3 Cache RAM 36608KB | 36608KB *| |
- | Processor 0 Version *| |
- | Intel(R) Xeon(R) Gold 6252N CPU @ 2.30GHz *| |
- | Processor 1 Version *| |
- | Intel(R) Xeon(R) Gold 6252N CPU @ 2.30GHz *| |
- | *|-----------------------------|
- | Hyper-Threading [ALL] [Enable] *|><: Select Screen |
- | Cores Enabled 0 *|^v: Select Item |
- | Monitor/Mwait [Auto] *|Enter: Select |
- | Execute Disable Bit [Enable] +|+/-: Change Opt. |
- | Intel Virtualization Technology [Enable] +|F1: General Help |
- | PPIN Control [Unlock/Enable] +|F2: Previous Values |
- | Hardware Prefetcher [Enable] +|F3: Optimized Defaults |
- | Adjacent Cache Prefetch [Enable] v|F4: Save & Exit |
- | DCU Streamer Prefetcher [Enable] | |
- | DCU IP Prefetcher [Enable] | |
- | LLC Prefetch [Disable] | |
- | Extended APIC [Disable] | |
- | AES-NI [Enable] | |
- |> Advanced Power Management Configuration | |
-```
-
-#### Advanced Power Management Configuration
-
-```
- | Advanced Power Management Configuration |Switch CPU Power Management |
- | -------------------------------------------------- |profile |
- | Power Technology [Custom] | |
- | Power Performance Tuning [BIOS Controls EPB] | |
- | ENERGY_PERF_BIAS_CFG mode [Maximum Performance] | |
- |> CPU P State Control | |
- |> Hardware PM State Control | |
- |> CPU C State Control | |
- |> Package C State Control | |
- |> CPU T State Control | |
-```
-
-##### CPU P State Control
-
-```
- | CPU P State Control |EIST allows the processor |
- | |to dynamically adjust |
- | SpeedStep (P-States) [Disable] |frequency and voltage based |
- | Activate PBF [Disable] |on power versus performance |
- | Configure PBF [Enable] |needs. |
- | EIST PSD Function [HW_ALL] | |
-```
-
-##### Hardware PM State Control
-
-```
- | Hardware PM State Control |If set to Disable, hardware ^|
- | |will choose a P-state *|
- | Hardware P-States [Disable] |setting for the system *|
- | |based on an OS request. *|
- | |If set to Native Mode, *|
- | |hardware will choose a *|
- | |P-state setting based on OS *|
- | |guidance. *|
- | |If set to Native Mode with *|
- | |No Legacy Support, hardware *|
- | |will choose a P-state *|
- | |setting independently *|
- | |without OS guidance. +|
- | |If set to Out of Band Mode, +|
- | |hardware autonomously v|
-```
-
-##### CPU C State Control
-
-```
- | CPU C State Control |Select Enable to support |
- | |Autonomous Core C-State |
- | Autonomous Core C-State [Disable] |control which will allow |
- | CPU C6 report [Disable] |the processor core to |
- | Enhanced Halt State (C1E) [Disable] |control its C-State setting |
- | |automatically and |
- | |independently. |
-```
-
-##### Package C State Control
-
-```
- | Package C State Control |Limit the lowest package |
- | |level C-State to |
- | Package C State [C0/C1 state] |processors. Lower package |
- | |C-State lower processor |
- | |power consumption upon idle. |
-```
-
-##### CPU T State Control
-
-```
- | CPU T State Control |Enable/Disable CPU |
- | |throttling by OS. |
- | Software Controlled T-States [Disable] |Throttling reduces power |
- | |consumption |
-```
-
-#### Chipset Configuration
-
-```
- | WARNING: Setting wrong values in below sections may cause |North Bridge Parameters |
- | system to malfunction. | |
- |> North Bridge | |
- |> South Bridge | |
-```
-
-##### North Bridge
-
-```
- |> UPI Configuration |Displays and provides |
- |> Memory Configuration |option to change the UPI |
- |> IIO Configuration |Settings |
-```
-
-##### UPI Configuration
-
-```
- | UPI Configuration |Use this feature to select |
- | -------------------------------------------------- |the degrading precedence |
- | Number of CPU 2 |option for Ultra Path |
- | Number of Active UPI Link 3 |Interconnect connections. |
- | Current UPI Link Speed Fast |Select Topology Precedent |
- | Current UPI Link Frequency 10.4 GT/s |to degrade UPI features if |
- | UPI Global MMIO Low Base / Limit 90000000 / FBFFFFFF |system options are in |
- | UPI Global MMIO High Base / Limit 0000000000000000 / |conflict. Select Feature |
- | 00000000FFFFFFFF |Precedent to degrade UPI |
- | UPI Pci-e Configuration Base / Size 80000000 / 10000000 |topology if system options |
- | Degrade Precedence [Topology Precedence] |are in conflict. |
- | Link L0p Enable [Disable] | |
- | Link L1 Enable [Disable] | |
- | IO Directory Cache (IODC) [Auto] | |
- | SNC [Disable] | |
- | XPT Prefetch [Disable] | |
- | KTI Prefetch [Enable] |-----------------------------|
- | Local/Remote Threshold [Auto] |><: Select Screen |
- | Stale AtoS [Auto] |^v: Select Item |
- | LLC Dead Line Alloc [Enable] |Enter: Select |
- | Isoc Mode [Auto] |+/-: Change Opt. |
-```
-
-##### Memory Configuration
-
-```
- | |Select POR to enforce POR |
- | -------------------------------------------------- |restrictions for DDR4 |
- | Integrated Memory Controller (iMC) |frequency and voltage |
- | -------------------------------------------------- |programming |
- | | |
- | Enforce POR [POR] | |
- | PPR Type [Hard PPR] | |
- | Enhanced PPR [Disable] | |
- | Operation Mode [Test and Repair] | |
- | Memory Frequency [2933] | |
- | Data Scrambling for DDR4 [Auto] | |
- | tCCD_L Relaxation [Auto] | |
- | tRWSR Relaxation [Disable] | |
- | tRFC Optimization for 16Gb Based DIMM [Force 550ns] | |
- | 2x Refresh [Auto] | |
- | Page Policy [Auto] | |
- | IMC Interleaving [2-way Interleave] |-----------------------------|
- |> Memory Topology |><: Select Screen |
- |> Memory RAS Configuration |^v: Select Item |
-```
-
-##### IIO Configuration
-
-```
- | IIO Configuration |Expose IIO DFX devices and |
- | -------------------------------------------------- |other CPU devices like PMON |
- | | |
- | EV DFX Features [Disable] | |
- |> CPU1 Configuration | |
- |> CPU2 Configuration | |
- |> IOAT Configuration | |
- |> Intel. VT for Directed I/O (VT-d) | |
- |> Intel. VMD technology | |
- | | |
- | IIO-PCIE Express Global Options | |
- | ======================================== | |
- | PCI-E Completion Timeout Disable [No] | |
-```
-
-##### CPU1 Configuration
-
-```
- | IOU0 (IIO PCIe Br1) [Auto] |Selects PCIe port |
- | IOU1 (IIO PCIe Br2) [Auto] |Bifurcation for selected |
- | IOU2 (IIO PCIe Br3) [Auto] |slot(s) |
- |> CPU1 SLOT2 PCI-E 3.0 X16 | |
- |> CPU1 SLOT4 PCI-E 3.0 X16 | |
- |> CPU1 SLOT9 PCI-E 3.0 X16 | |
-```
-
-##### CPU2 Configuration
-
-```
- | IOU0 (IIO PCIe Br1) [Auto] |Selects PCIe port |
- | IOU1 (IIO PCIe Br2) [Auto] |Bifurcation for selected |
- | IOU2 (IIO PCIe Br3) [Auto] |slot(s) |
- |> CPU2 SLOT6 PCI-E 3.0 X16 | |
- |> CPU2 SLOT8 PCI-E 3.0 X16 | |
- |> CPU2 SLOT10 PCI-E 3.0 X16 | |
-```
-
-#### South Bridge
-
-```
- | |Enables Legacy USB support. |
- | USB Module Version 21 |AUTO option disables legacy |
- | |support if no USB devices |
- | USB Devices: |are connected. DISABLE |
- | 1 Keyboard, 1 Mouse, 1 Hub |option will keep USB |
- | |devices available only for |
- | Legacy USB Support [Enabled] |EFI applications. |
- | XHCI Hand-off [Enabled] | |
- | Port 60/64 Emulation [Enabled] | |
- | PCIe PLL SSC [Disable] | |
- | Real USB Wake Up [Enabled] | |
- | Front USB Wake Up [Enabled] | |
- | | |
- | Azalia [Auto] | |
- | Azalia PME Enable [Disabled] | |
-```
-
-### PCIe/PCI/PnP Configuration
-
-```
- | PCI Bus Driver Version A5.01.18 ^|Enables or Disables 64bit |
- | *|capable Devices to be |
- | PCI Devices Common Settings: *|Decoded in Above 4G Address |
- | Above 4G Decoding [Enabled] *|Space (Only if System |
- | SR-IOV Support [Enabled] *|Supports 64 bit PCI |
- | ARI Support [Enabled] *|Decoding). |
- | MMIO High Base [56T] *| |
- | MMIO High Granularity Size [256G] *| |
- | Maximum Read Request [Auto] *| |
- | MMCFG Base [2G] *| |
- | NVMe Firmware Source [Vendor Defined *| |
- | Firmware] *| |
- | VGA Priority [Onboard] *| |
- | CPU1 SLOT2 PCI-E 3.0 X16 OPROM [Legacy] *| |
- | CPU1 SLOT4 PCI-E 3.0 X16 OPROM [Legacy] *| |
- | CPU2 SLOT6 PCI-E 3.0 X16 OPROM [Legacy] *| |
- | CPU2 SLOT8 PCI-E 3.0 X16 OPROM [Legacy] *|-----------------------------|
- | CPU1 SLOT9 PCI-E 3.0 X16 OPROM [Legacy] *|><: Select Screen |
- | CPU2 SLOT10 PCI-E 3.0 X16 OPROM [Legacy] *|^v: Select Item |
- | CPU2 SLOT11 PCI-E 3.0 X4(IN X8) OPROM [Legacy] *|Enter: Select |
- | M.2 CONNECTOR OPROM [Legacy] *|+/-: Change Opt. |
- | Bus Master Enable [Enabled] +|F1: General Help |
- | Onboard LAN1 Option ROM [Legacy] +|F2: Previous Values |
- | Onboard LAN2 Option ROM [Disabled] +|F3: Optimized Defaults |
- | Onboard Video Option ROM [Legacy] v|F4: Save & Exit |
- |> Network Stack Configuration | |
-```
-
-### ACPI Settings
-
-```
- | ACPI Settings |Enable or Disable Non |
- | |uniform Memory Access |
- | NUMA [Enabled] |(NUMA). |
- | WHEA Support [Enabled] | |
- | High Precision Event Timer [Enabled] | |
-```
-
-
-## Xeon Clx Server Firmware Inventory
-
-```
-Host. IPMI IP. BMC. BIOS. CPLD. CPU Microcode. PCI Bus. X710 Firmware. XXV710 Firmware. i40e. MLX5 Firmware. mlx5_core
-s32-t14-sut1. 10.30.55.17. 1.67. 3.0c. 03.B1.05. 0500002C. A5.01.18. 6.01 0x800034af 1.1747.0. 6.01 0x80003554 1.1747.0. 2.1.14-k. N/A. N/A.
-s33-t27-sut1. 10.30.55.18. 1.67. 3.2. 03.B1.05. 0500002C. A5.01.18. 6.01 0x800034af 1.1747.0. 6.01 0x80003554 1.1747.0. 2.1.14-k. 16.25.1020. 4.6.-1.0.1.
-s34-t27-tg1. 10.30.55.19. 1.67. 3.2. 03.B1.05. 0500002C. A5.01.18. 6.01 0x800034af 1.1747.0. 6.01 0x80003554 1.1747.0. 2.1.14-k. 16.25.1020. 4.6.-1.0.1.
-s35-t28-sut1. 10.30.55.20. 1.67. 3.2. 03.B1.05. 0500002C. A5.01.18. 6.01 0x800034af 1.1747.0. 6.01 0x80003554 1.1747.0. 2.1.14-k. 16.25.1020. 4.6.-1.0.1.
-s36-t28-tg1. 10.30.55.21. 1.67. 3.2. 03.B1.05. 0500002C. A5.01.18. 6.01 0x800034af 1.1747.0. 6.01 0x80003554 1.1747.0. 2.1.14-k. 16.25.1020. 4.6.-1.0.1.
-s37-t29-sut1. 10.30.55.22. 1.67. 3.2. 03.B1.05. 0500002C. A5.01.18. 6.01 0x800034af 1.1747.0. 6.01 0x80003554 1.1747.0. 2.1.14-k. 16.25.1020. 4.6.-1.0.1.
-s38-t29-tg1. 10.30.55.23. 1.67. 3.2. 03.B1.05. 0500002C. A5.01.18. 6.01 0x800034af 1.1747.0. 6.01 0x80003554 1.1747.0. 2.1.14-k. 16.25.1020. 4.6.-1.0.1.
-```
Code Review / csit.git / blobdiff