--- /dev/null
+# SuperMicro Cascadelake Servers - HW and BIOS Configuration
+
+1. [Linux lscpu](#linux-lscpu)
+1. [Linux dmidecode](#dmidecode)
+1. [Linux dmidecode pci](#linux-dmidecode-pci)
+1. [Linux dmidecode memory](#linux-dmidecode-memory)
+1. [EPYC zn2 Server BIOS Configuration](#epyc-zn2-server-bios-configuration)
+ 1. [Boot Feature](#boot-feature)
+ 1. [CPU Configuration](#cpu-configuration)
+ 1. [Advanced Power Management Configuration](#advanced-power-management-configuration)
+ 1. [CPU P State Control](#cpu-p-state-control)
+ 1. [Hardware PM State Control](#hardware-pm-state-control)
+ 1. [CPU C State Control](#cpu-c-state-control)
+ 1. [Package C State Control](#package-c-state-control)
+ 1. [CPU T State Control](#cpu-t-state-control)
+ 1. [Chipset Configuration](#chipset-configuration)
+ 1. [North Bridge](#north-bridge)
+ 1. [UPI Configuration](#upi-configuration)
+ 1. [Memory Configuration](#memory-configuration)
+ 1. [IIO Configuration](#iio-configuration)
+ 1. [CPU1 Configuration](#cpu1-configuration)
+ 1. [CPU2 Configuration](#cpu2-configuration)
+ 1. [South Bridge](#south-bridge)
+ 1. [PCIe/PCI/PnP Configuration](#pciepcipnp-configuration)
+ 1. [ACPI Settings](#acpi-settings)
+1. [EPYC zn2 Server Firmware Inventory](#epyc-zn2-server-firmware-inventory)
+
+## Linux lscpu
+
+```
+$ lscpu
+Architecture: x86_64
+CPU op-mode(s): 32-bit, 64-bit
+Byte Order: Little Endian
+CPU(s): 64
+On-line CPU(s) list: 0-63
+Thread(s) per core: 2
+Core(s) per socket: 32
+Socket(s): 1
+NUMA node(s): 2
+Vendor ID: AuthenticAMD
+CPU family: 23
+Model: 49
+Model name: AMD EPYC 7532 32-Core Processor
+Stepping: 0
+CPU MHz: 1981.470
+CPU max MHz: 2400.0000
+CPU min MHz: 1500.0000
+BogoMIPS: 4800.05
+Virtualization: AMD-V
+L1d cache: 32K
+L1i cache: 32K
+L2 cache: 512K
+L3 cache: 16384K
+NUMA node0 CPU(s): 0-15,32-47
+NUMA node1 CPU(s): 16-31,48-63
+Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl xtopology nonstop_tsc cpuid extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb cat_l3 cdp_l3 hw_pstate sme ssbd ibrs ibpb stibp vmmcall fsgsbase bmi1 avx2 smep bmi2 cqm rdt_a rdseed adx smap clflushopt clwb sha_ni xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local clzero irperf xsaveerptr arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold avic v_vmsave_vmload vgif umip rdpid overflow_recov succor smca
+```
+
+```
+$ lscpu
+Architecture: x86_64
+CPU op-mode(s): 32-bit, 64-bit
+Byte Order: Little Endian
+CPU(s): 64
+On-line CPU(s) list: 0-63
+Thread(s) per core: 2
+Core(s) per socket: 32
+Socket(s): 1
+NUMA node(s): 2
+Vendor ID: AuthenticAMD
+CPU family: 23
+Model: 49
+Model name: AMD EPYC 7532 32-Core Processor
+Stepping: 0
+CPU MHz: 1981.470
+CPU max MHz: 2400.0000
+CPU min MHz: 1500.0000
+BogoMIPS: 4800.05
+Virtualization: AMD-V
+L1d cache: 32K
+L1i cache: 32K
+L2 cache: 512K
+L3 cache: 16384K
+NUMA node0 CPU(s): 0-15,32-47
+NUMA node1 CPU(s): 16-31,48-63
+Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl xtopology nonstop_tsc cpuid extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb cat_l3 cdp_l3 hw_pstate sme ssbd ibrs ibpb stibp vmmcall fsgsbase bmi1 avx2 smep bmi2 cqm rdt_a rdseed adx smap clflushopt clwb sha_ni xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local clzero irperf xsaveerptr arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold avic v_vmsave_vmload vgif umip rdpid overflow_recov succor smca
+```
+
+## Linux dmidecode
+
+```
+ $ dmidecode -t slot
+ Handle 0x0026, DMI type 7, 27 bytes
+ Cache Information
+ Socket Designation: L1 Cache
+ Configuration: Enabled, Not Socketed, Level 1
+ Operational Mode: Write Back
+ Location: Internal
+ Installed Size: 2048 kB
+ Maximum Size: 2048 kB
+ Supported SRAM Types:
+ Pipeline Burst
+ Installed SRAM Type: Pipeline Burst
+ Speed: 1 ns
+ Error Correction Type: Multi-bit ECC
+ System Type: Unified
+ Associativity: 8-way Set-associative
+
+ Handle 0x0027, DMI type 7, 27 bytes
+ Cache Information
+ Socket Designation: L2 Cache
+ Configuration: Enabled, Not Socketed, Level 2
+ Operational Mode: Write Back
+ Location: Internal
+ Installed Size: 16384 kB
+ Maximum Size: 16384 kB
+ Supported SRAM Types:
+ Pipeline Burst
+ Installed SRAM Type: Pipeline Burst
+ Speed: 1 ns
+ Error Correction Type: Multi-bit ECC
+ System Type: Unified
+ Associativity: 8-way Set-associative
+
+ Handle 0x0028, DMI type 7, 27 bytes
+ Cache Information
+ Socket Designation: L3 Cache
+ Configuration: Enabled, Not Socketed, Level 3
+ Operational Mode: Write Back
+ Location: Internal
+ Installed Size: 262144 kB
+ Maximum Size: 262144 kB
+ Supported SRAM Types:
+ Pipeline Burst
+ Installed SRAM Type: Pipeline Burst
+ Speed: 1 ns
+ Error Correction Type: Multi-bit ECC
+ System Type: Unified
+ Associativity: 16-way Set-associative
+
+ Handle 0x0029, DMI type 4, 48 bytes
+ Processor Information
+ Socket Designation: CPU
+ Type: Central Processor
+ Family: Zen
+ Manufacturer: Advanced Micro Devices, Inc.
+ ID: 10 0F 83 00 FF FB 8B 17
+ Signature: Family 23, Model 49, Stepping 0
+ Flags:
+ FPU (Floating-point unit on-chip)
+ VME (Virtual mode extension)
+ DE (Debugging extension)
+ PSE (Page size extension)
+ TSC (Time stamp counter)
+ MSR (Model specific registers)
+ PAE (Physical address extension)
+ MCE (Machine check exception)
+ CX8 (CMPXCHG8 instruction supported)
+ APIC (On-chip APIC hardware supported)
+ SEP (Fast system call)
+ MTRR (Memory type range registers)
+ PGE (Page global enable)
+ MCA (Machine check architecture)
+ CMOV (Conditional move instruction supported)
+ PAT (Page attribute table)
+ PSE-36 (36-bit page size extension)
+ CLFSH (CLFLUSH instruction supported)
+ MMX (MMX technology supported)
+ FXSR (FXSAVE and FXSTOR instructions supported)
+ SSE (Streaming SIMD extensions)
+ SSE2 (Streaming SIMD extensions 2)
+ HTT (Multi-threading)
+ Version: AMD EPYC 7532 32-Core Processor
+ Voltage: 1.1 V
+ External Clock: 100 MHz
+ Max Speed: 3300 MHz
+ Current Speed: 2400 MHz
+ Status: Populated, Enabled
+ Upgrade: Socket SP3
+ L1 Cache Handle: 0x0026
+ L2 Cache Handle: 0x0027
+ L3 Cache Handle: 0x0028
+ Serial Number: Unknown
+ Asset Tag: Unknown
+ Part Number: Unknown
+ Core Count: 32
+ Core Enabled: 32
+ Thread Count: 64
+ Characteristics:
+ 64-bit capable
+ Multi-Core
+ Hardware Thread
+ Execute Protection
+ Enhanced Virtualization
+ Power/Performance Control
+```
+
+## Linux dmidecode pci
+
+```
+ $ dmidecode -t slot
+ Getting SMBIOS data from sysfs.
+ SMBIOS 3.2.0 present.
+ # SMBIOS implementations newer than version 3.1.1 are not
+ # fully supported by this version of dmidecode.
+
+ Handle 0x000A, DMI type 9, 17 bytes
+ System Slot Information
+ Designation: M.2-HC1 CPU PCI-E 4.0 X4/X2
+ Type: x4 PCI Express 3 x4
+ Current Usage: Available
+ Length: Short
+ ID: 1
+ Characteristics:
+ 3.3 V is provided
+ Opening is shared
+ PME signal is supported
+ Bus Address: 0000:ff:00.0
+
+ Handle 0x000B, DMI type 9, 17 bytes
+ System Slot Information
+ Designation: M.2-HC2 CPU PCI-E 4.0 X2
+ Type: x2 PCI Express 3 x2
+ Current Usage: Available
+ Length: Short
+ ID: 2
+ Characteristics:
+ 3.3 V is provided
+ Opening is shared
+ PME signal is supported
+ Bus Address: 0000:ff:00.0
+
+ Handle 0x0042, DMI type 9, 17 bytes
+ System Slot Information
+ Designation: RSC-W-66G4 SLOT1 PCI-E 4.0 X16
+ Type: x16 PCI Express 3 x16
+ Current Usage: In Use
+ Length: Long
+ ID: 1
+ Characteristics:
+ 3.3 V is provided
+ PME signal is supported
+ Bus Address: 0000:41:00.0
+
+ Handle 0x0043, DMI type 9, 17 bytes
+ System Slot Information
+ Designation: RSC-W-66G4 SLOT2 PCI-E 4.0 X16
+ Type: x16 PCI Express 3 x16
+ Current Usage: In Use
+ Length: Long
+ ID: 2
+ Characteristics:
+ 3.3 V is provided
+ PME signal is supported
+ Bus Address: 0000:81:00.0
+
+ Handle 0x0045, DMI type 9, 17 bytes
+ System Slot Information
+ Designation: RSC-WR-6 SLOT1 PCI-E 4.0 X16
+ Type: x16 PCI Express 3 x16
+ Current Usage: In Use
+ Length: Long
+ ID: 1
+ Characteristics:
+ 3.3 V is provided
+ PME signal is supported
+ Bus Address: 0000:01:00.0
+
+```
+
+## Linux dmidecode memory
+
+```
+ $ dmidecode -t memory
+ # dmidecode 3.1
+ Getting SMBIOS data from sysfs.
+ SMBIOS 3.2.0 present.
+ # SMBIOS implementations newer than version 3.1.1 are not
+ # fully supported by this version of dmidecode.
+
+ Handle 0x0023, DMI type 16, 23 bytes
+ Physical Memory Array
+ Location: System Board Or Motherboard
+ Use: System Memory
+ Error Correction Type: Multi-bit ECC
+ Maximum Capacity: 2 TB
+ Error Information Handle: 0x0022
+ Number Of Devices: 8
+
+ Handle 0x002B, DMI type 17, 84 bytes
+ Memory Device
+ Array Handle: 0x0023
+ Error Information Handle: 0x002A
+ Total Width: 72 bits
+ Data Width: 64 bits
+ Size: 32 GB
+ Form Factor: DIMM
+ Set: None
+ Locator: DIMMA1
+ Bank Locator: P0_Node0_Channel0_Dimm0
+ Type: DDR4
+ Type Detail: Synchronous Registered (Buffered)
+ Speed: 3200 MT/s
+ Manufacturer: SK Hynix
+ Serial Number: 431E9216
+ Asset Tag: P1-DIMMA1_AssetTag (date:19/00)
+ Part Number: HMA84GR7CJR4N-XN
+ Rank: 2
+ Configured Clock Speed: 3200 MT/s
+ Minimum Voltage: 1.2 V
+ Maximum Voltage: 1.2 V
+ Configured Voltage: 1.2 V
+
+ Handle 0x002E, DMI type 17, 84 bytes
+ Memory Device
+ Array Handle: 0x0023
+ Error Information Handle: 0x002D
+ Total Width: 72 bits
+ Data Width: 64 bits
+ Size: 32 GB
+ Form Factor: DIMM
+ Set: None
+ Locator: DIMMB1
+ Bank Locator: P0_Node0_Channel1_Dimm0
+ Type: DDR4
+ Type Detail: Synchronous Registered (Buffered)
+ Speed: 3200 MT/s
+ Manufacturer: SK Hynix
+ Serial Number: 431E91D2
+ Asset Tag: P1-DIMMB1_AssetTag (date:19/00)
+ Part Number: HMA84GR7CJR4N-XN
+ Rank: 2
+ Configured Clock Speed: 3200 MT/s
+ Minimum Voltage: 1.2 V
+ Maximum Voltage: 1.2 V
+ Configured Voltage: 1.2 V
+
+ Handle 0x0031, DMI type 17, 84 bytes
+ Memory Device
+ Array Handle: 0x0023
+ Error Information Handle: 0x0030
+ Total Width: 72 bits
+ Data Width: 64 bits
+ Size: 32 GB
+ Form Factor: DIMM
+ Set: None
+ Locator: DIMMC1
+ Bank Locator: P0_Node0_Channel2_Dimm0
+ Type: DDR4
+ Type Detail: Synchronous Registered (Buffered)
+ Speed: 3200 MT/s
+ Manufacturer: SK Hynix
+ Serial Number: 431E918A
+ Asset Tag: P1-DIMMC1_AssetTag (date:19/00)
+ Part Number: HMA84GR7CJR4N-XN
+ Rank: 2
+ Configured Clock Speed: 3200 MT/s
+ Minimum Voltage: 1.2 V
+ Maximum Voltage: 1.2 V
+ Configured Voltage: 1.2 V
+
+ Handle 0x0034, DMI type 17, 84 bytes
+ Memory Device
+ Array Handle: 0x0023
+ Error Information Handle: 0x0033
+ Total Width: 72 bits
+ Data Width: 64 bits
+ Size: 32 GB
+ Form Factor: DIMM
+ Set: None
+ Locator: DIMMD1
+ Bank Locator: P0_Node0_Channel3_Dimm0
+ Type: DDR4
+ Type Detail: Synchronous Registered (Buffered)
+ Speed: 3200 MT/s
+ Manufacturer: SK Hynix
+ Serial Number: 431E9187
+ Asset Tag: P1-DIMMD1_AssetTag (date:19/00)
+ Part Number: HMA84GR7CJR4N-XN
+ Rank: 2
+ Configured Clock Speed: 3200 MT/s
+ Minimum Voltage: 1.2 V
+ Maximum Voltage: 1.2 V
+ Configured Voltage: 1.2 V
+
+ Handle 0x0037, DMI type 17, 84 bytes
+ Memory Device
+ Array Handle: 0x0023
+ Error Information Handle: 0x0036
+ Total Width: 72 bits
+ Data Width: 64 bits
+ Size: 32 GB
+ Form Factor: DIMM
+ Set: None
+ Locator: DIMME1
+ Bank Locator: P0_Node0_Channel4_Dimm0
+ Type: DDR4
+ Type Detail: Synchronous Registered (Buffered)
+ Speed: 3200 MT/s
+ Manufacturer: SK Hynix
+ Serial Number: 431E9178
+ Asset Tag: P1-DIMME1_AssetTag (date:19/00)
+ Part Number: HMA84GR7CJR4N-XN
+ Rank: 2
+ Configured Clock Speed: 3200 MT/s
+ Minimum Voltage: 1.2 V
+ Maximum Voltage: 1.2 V
+ Configured Voltage: 1.2 V
+
+ Handle 0x003A, DMI type 17, 84 bytes
+ Memory Device
+ Array Handle: 0x0023
+ Error Information Handle: 0x0039
+ Total Width: 72 bits
+ Data Width: 64 bits
+ Size: 32 GB
+ Form Factor: DIMM
+ Set: None
+ Locator: DIMMF1
+ Bank Locator: P0_Node0_Channel5_Dimm0
+ Type: DDR4
+ Type Detail: Synchronous Registered (Buffered)
+ Speed: 3200 MT/s
+ Manufacturer: SK Hynix
+ Serial Number: 431E9206
+ Asset Tag: P1-DIMMF1_AssetTag (date:19/00)
+ Part Number: HMA84GR7CJR4N-XN
+ Rank: 2
+ Configured Clock Speed: 3200 MT/s
+ Minimum Voltage: 1.2 V
+ Maximum Voltage: 1.2 V
+ Configured Voltage: 1.2 V
+
+ Handle 0x003D, DMI type 17, 84 bytes
+ Memory Device
+ Array Handle: 0x0023
+ Error Information Handle: 0x003C
+ Total Width: 72 bits
+ Data Width: 64 bits
+ Size: 32 GB
+ Form Factor: DIMM
+ Set: None
+ Locator: DIMMG1
+ Bank Locator: P0_Node0_Channel6_Dimm0
+ Type: DDR4
+ Type Detail: Synchronous Registered (Buffered)
+ Speed: 3200 MT/s
+ Manufacturer: SK Hynix
+ Serial Number: 431E9207
+ Asset Tag: P1-DIMMG1_AssetTag (date:19/00)
+ Part Number: HMA84GR7CJR4N-XN
+ Rank: 2
+ Configured Clock Speed: 3200 MT/s
+ Minimum Voltage: 1.2 V
+ Maximum Voltage: 1.2 V
+ Configured Voltage: 1.2 V
+
+ Handle 0x0040, DMI type 17, 84 bytes
+ Memory Device
+ Array Handle: 0x0023
+ Error Information Handle: 0x003F
+ Total Width: 72 bits
+ Data Width: 64 bits
+ Size: 32 GB
+ Form Factor: DIMM
+ Set: None
+ Locator: DIMMH1
+ Bank Locator: P0_Node0_Channel7_Dimm0
+ Type: DDR4
+ Type Detail: Synchronous Registered (Buffered)
+ Speed: 3200 MT/s
+ Manufacturer: SK Hynix
+ Serial Number: 431E9209
+ Asset Tag: P1-DIMMH1_AssetTag (date:19/00)
+ Part Number: HMA84GR7CJR4N-XN
+ Rank: 2
+ Configured Clock Speed: 3200 MT/s
+ Minimum Voltage: 1.2 V
+ Maximum Voltage: 1.2 V
+ Configured Voltage: 1.2 V
+```
+
+## EPYC zn2 Server BIOS Configuration - TG
+
+### Boot Feature
+
+```
+ | Quiet Boot [Enabled] |Boot option |
+ | | |
+ | Option ROM Messages [Force BIOS] | |
+ | Bootup NumLock State [On] | |
+ | Wait For "F1" If Error [Enabled] | |
+ | INT19 Trap Response [Immediate] | |
+ | Re-try Boot [Disabled] | |
+ | | |
+ | Power Configuration | |
+ | Watch Dog Function [Disabled] | |
+ | Restore on AC Power Loss [Last State] | |
+ | Power Button Function [Instant Off] | |
+```
+
+### CPU Configuration
+
+```
+ | ACPI Settings ^| |
+ | -------------------------------------------------- *| |
+ | PCI AER Support [Disabled] *| |
+ | High Precision Event Timer [Disabled] *| |
+ | NUMA Nodes Per Socket [NPS2] *| |
+ | ACPI SRAT L3 Cache As NUMA Domain [Auto] *| |
+ | *| |
+ | CPU Configuration ^| |
+ | -------------------------------------------------- *| |
+ | SMT Control [Auto] *| |
+ | Core Performance Boost [Auto] *| |
+ | Global C-state control [Disabled] *| |
+ | Local APIC Mode [Auto] *| |
+ | CCD Control [Auto] *| |
+ | Core Control [Auto] *| |
+ | Core Control [Auto] *| |
+ | L1 Stream HW Prefetcher [Enabled] *| |
+ | L2 Stream HW Prefetcher [Enabled] *| |
+ | SVM Mode [Enabled] *| |
+ | SMEE [Disabled] *| |
+ | *| |
+ |> CPU1 Information *| |
+ | *| |
+ | NB Configuration ^| |
+ | -------------------------------------------------- *| |
+ | Determinism Control [Manual] *| |
+ | Determinism Slider [Performance] *| |
+ | cTDP Control [Disabled] *| |
+ | IOMMU [Disabled] *| |
+ | ACS Enable [Auto] *| |
+ | Package Power Limit Control [Auto] *| |
+ | APBDIS [1] *| |
+ | Fixed SOC Pstate [P0] *| |
+ | DF Cstates [Enabled] *| |
+ | Preferred IO [Manual] *| |
+ | Preferred IO Bus [##] *| |
+ | *| |
+ | *|-----------------------------|
+ | *|><: Select Screen |
+ | *|^v: Select Item |
+ | *|Enter: Select |
+ | +|+/-: Change Opt. |
+ | +|F1: General Help |
+ | +|F2: Previous Values |
+ | +|F3: Optimized Defaults |
+ | v|F4: Save & Exit |
+ | | |
+```
+
+
+## EPYC zn2 Server BIOS Configuration - DUT
+
+### Boot Feature
+
+```
+ | Quiet Boot [Enabled] |Boot option |
+ | | |
+ | Option ROM Messages [Force BIOS] | |
+ | Bootup NumLock State [On] | |
+ | Wait For "F1" If Error [Enabled] | |
+ | INT19 Trap Response [Immediate] | |
+ | Re-try Boot [Disabled] | |
+ | | |
+ | Power Configuration | |
+ | Watch Dog Function [Disabled] | |
+ | Restore on AC Power Loss [Last State] | |
+ | Power Button Function [Instant Off] | |
+```
+
+### CPU Configuration
+
+```
+ | ACPI Settings ^| |
+ | -------------------------------------------------- *| |
+ | PCI AER Support [Disabled] *| |
+ | High Precision Event Timer [Disabled] *| |
+ | NUMA Nodes Per Socket [NPS2] *| |
+ | ACPI SRAT L3 Cache As NUMA Domain [Auto] *| |
+ | *| |
+ | CPU Configuration ^| |
+ | -------------------------------------------------- *| |
+ | SMT Control [Auto] *| |
+ | Core Performance Boost [Auto] *| |
+ | Global C-state control [Disabled] *| |
+ | Local APIC Mode [Auto] *| |
+ | CCD Control [Auto] *| |
+ | Core Control [Auto] *| |
+ | Core Control [Auto] *| |
+ | L1 Stream HW Prefetcher [Enabled] *| |
+ | L2 Stream HW Prefetcher [Enabled] *| |
+ | SVM Mode [Enabled] *| |
+ | SMEE [Disabled] *| |
+ | *| |
+ |> CPU1 Information *| |
+ | *| |
+ | NB Configuration ^| |
+ | -------------------------------------------------- *| |
+ | Determinism Control [Manual] *| |
+ | Determinism Slider [Performance] *| |
+ | cTDP Control [Disabled] *| |
+ | IOMMU [Disabled] *| |
+ | ACS Enable [Auto] *| |
+ | Package Power Limit Control [Auto] *| |
+ | APBDIS [1] *| |
+ | Fixed SOC Pstate [P0] *| |
+ | DF Cstates [Enabled] *| |
+ | Preferred IO [Manual] *| |
+ | Preferred IO Bus [##] *| |
+ | *| |
+ | *|-----------------------------|
+ | *|><: Select Screen |
+ | *|^v: Select Item |
+ | *|Enter: Select |
+ | +|+/-: Change Opt. |
+ | +|F1: General Help |
+ | +|F2: Previous Values |
+ | +|F3: Optimized Defaults |
+ | v|F4: Save & Exit |
+ | | |
+```
+
+
+## EPYC zn2 Server Firmware Inventory
+
+```
+Host. IPMI IP. BMC. BIOS. CPLD. CPU Microcode. PCI Bus. X710 Firmware. XXV710 Firmware. i40e. MLX5 Firmware. mlx5_core
+s60-t210-sut1. 10.30.55.24. 03.10.04. 1.1a. 02.c2.00. 0x8301038. ?. 6.80 0x80003ce6 1.2074.0. 6.01 0x80003554 1.1747.0. 2.1.14-k. 16.26.1040. 4.6-1.0.1.
+s61-t210-tg1. 10.30.55.25. 03.10.04. 1.1a. 02.c2.00. 0x8301038. ?. 6.80 0x80003ce6 1.2074.0. 6.01 0x80003554 1.1747.0. 2.1.14-k. 16.26.1040. 4.6-1.0.1.
+```
\ No newline at end of file
Code Review / csit.git / blobdiff