rls1807: updated environment sections for all functional tests.

[csit.git] / docs / report / dpdk_performance_tests / test_environment.rst

diff --git a/docs/report/dpdk_performance_tests/test_environment.rst b/docs/report/dpdk_performance_tests/test_environment.rst
index eb6617b..175c3ef 100644 (file)
--- a/docs/report/dpdk_performance_tests/test_environment.rst
+++ b/docs/report/dpdk_performance_tests/test_environment.rst
@@ -1,68 +1,51 @@
-.. include:: ../vpp_performance_tests/test_environment_intro.rst\r
-\r
-.. include:: ../vpp_performance_tests/test_environment_sut_conf_1.rst\r
-\r
-.. include:: ../vpp_performance_tests/test_environment_sut_conf_3.rst\r
-\r
-\r
-DUT Configuration - DPDK\r
-------------------------\r
-\r
-**DPDK Version**\r
-\r
-|dpdk-release|\r
-\r
-**DPDK Compile Parameters**\r
-\r
-.. code-block:: bash\r
-\r
-    make install T=x86_64-native-linuxapp-gcc -j\r
-\r
-**Testpmd Startup Configuration**\r
-\r
-Testpmd startup configuration changes per test case with different settings for CPU\r
-cores, rx-queues. Startup config is aligned with applied test case tag:\r
-\r
-Tagged by **1T1C**\r
-\r
-.. code-block:: bash\r
-\r
-    testpmd -c 0x3 -n 4 -- --numa --nb-ports=2 --portmask=0x3 --nb-cores=1 --max-pkt-len=9000 --txqflags=0 --forward-mode=io --rxq=1 --txq=1 --burst=64 --rxd=1024 --txd=1024 --disable-link-check --auto-start\r
-\r
-Tagged by **2T2C**\r
-\r
-.. code-block:: bash\r
-\r
-    testpmd -c 0x403 -n 4 -- --numa --nb-ports=2 --portmask=0x3 --nb-cores=2 --max-pkt-len=9000 --txqflags=0 --forward-mode=io --rxq=1 --txq=1 --burst=64 --rxd=1024 --txd=1024 --disable-link-check --auto-start\r
-\r
-Tagged by **4T4C**\r
-\r
-.. code-block:: bash\r
-\r
-    testpmd -c 0xc07 -n 4 -- --numa --nb-ports=2 --portmask=0x3 --nb-cores=4 --max-pkt-len=9000 --txqflags=0 --forward-mode=io --rxq=2 --txq=2 --burst=64 --rxd=1024 --txd=1024 --disable-link-check --auto-start\r
-\r
-**L3FWD Startup Configuration**\r
-\r
-L3FWD startup configuration changes per test case with different settings for CPU\r
-cores, rx-queues. Startup config is aligned with applied test case tag:\r
-\r
-Tagged by **1T1C**\r
-\r
-.. code-block:: bash\r
-\r
-    l3fwd -l 1 -n 4 -- -P -L -p 0x3 --config='${port_config}' --enable-jumbo --max-pkt-len=9000 --eth-dest=0,${adj_mac0} --eth-dest=1,${adj_mac1} --parse-ptype\r
-\r
-Tagged by **2T2C**\r
-\r
-.. code-block:: bash\r
-\r
-    l3fwd -l 1,2 -n 4 -- -P -L -p 0x3 --config='${port_config}' --enable-jumbo --max-pkt-len=9000 --eth-dest=0,${adj_mac0} --eth-dest=1,${adj_mac1} --parse-ptype\r
-\r
-Tagged by **4T4C**\r
-\r
-.. code-block:: bash\r
-\r
-    l3fwd -l 1,2,3,4 -n 4 -- -P -L -p 0x3 --config='${port_config}' --enable-jumbo --max-pkt-len=9000 --eth-dest=0,${adj_mac0} --eth-dest=1,${adj_mac1} --parse-ptype\r
-\r
-\r
-.. include:: ../vpp_performance_tests/test_environment_tg.rst\r
+
+.. raw:: latex
+
+    \clearpage
+
+.. include:: ../introduction/test_environment_intro.rst
+
+.. include:: ../introduction/test_environment_sut_conf_1.rst
+
+.. include:: ../introduction/test_environment_sut_conf_3.rst
+
+
+DUT Settings - DPDK
+-------------------
+
+DPDK Version
+~~~~~~~~~~~~
+
+|dpdk-release|
+
+DPDK Compile Parameters
+~~~~~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: bash
+
+    make install T=x86_64-native-linuxapp-gcc -j
+
+Testpmd Startup Configuration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Testpmd startup configuration changes per test case with different
+settings for `$$CORES`, `$$RXQ` and max-pkt-len parameter if test is
+sending jumbo frames. Startup command template:
+
+.. code-block:: bash
+
+    testpmd -c $$CORE_MASK -n 4 -- --numa --nb-ports=2 --portmask=0x3 --nb-cores=$$CORES --max-pkt-len=9000 --txqflags=0 --forward-mode=io --rxq=$$RXQ --txq=$$TXQ --burst=64 --rxd=1024 --txd=1024 --disable-link-check --auto-start
+
+L3FWD Startup Configuration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+L3FWD startup configuration changes per test case with different
+settings for `$$CORES` and enable-jumbo parameter if test is sending
+jumbo frames. Startup command template:
+
+.. code-block:: bash
+
+    l3fwd -l $$CORE_LIST -n 4 -- -P -L -p 0x3 --config='${port_config}' --enable-jumbo --max-pkt-len=9000 --eth-dest=0,${adj_mac0} --eth-dest=1,${adj_mac1} --parse-ptype
+
+
+.. include:: ../introduction/test_environment_tg.rst