documentation based on the content of
`tag documentation rst file`_.
-Topology TAGs
--------------
-
-.. topic:: 3_NODE_DOUBLE_LINK_TOPO
-
- 3 nodes connected in a circular topology with two links interconnecting
- the devices.
-
-.. topic:: 3_NODE_SINGLE_LINK_TOPO
-
- 3 nodes connected in a circular topology with at least one link
- interconnecting devices.
-
-Objective TAGs
---------------
-
-.. topic:: SKIP_PATCH
-
- Test case(s) marked to not run in case of vpp-csit-verify (i.e. VPP patch)
- and csit-vpp-verify jobs (i.e. CSIT patch).
-
-
-Environment TAGs
-----------------
-
-.. topic:: HW_ENV
-
- DUTs and TGs are running on bare metal.
-
-.. topic:: VM_ENV
-
- DUTs and TGs are running in virtual environment.
-
-.. topic:: VPP_VM_ENV
-
- DUTs with VPP and capable of running Virtual Machine.
-
-
-NIC model tags
---------------
-
-.. topic:: NIC_Intel-X520-DA2
-
- Intel X520-DA2 NIC.
-
-.. topic:: NIC_Intel-XL710
-
- Intel XL710 NIC.
-
-.. topic:: NIC_Intel-X710
-
- Intel X710 NIC.
-
-.. topic:: NIC_Cisco-VIC-1227
-
- VIC-1227 by Cisco.
-
-.. topic:: NIC_Cisco-VIC-1385
-
- VIC-1385 by Cisco.
-
-
-Scaling TAGs
-------------
-
-.. topic:: FIB_20K
-
- 2x10,000 entries in single fib table
-
-.. topic:: FIB_200K
-
- 2x100,000 entries in single fib table
-
-.. topic:: FIB_2M
-
- 2x1,000,000 entries in single fib table
-
-
-Tags marking functional vs. performance of tests
-------------------------------------------------
-
-.. topic:: FUNCTEST
-
- All functional test cases.
-
-.. topic:: PERFTEST
-
- All performance test cases.
-
-
-Performance testing tags
-------------------------
-
-.. topic:: PDRDISC
-
- Partial Drop Rate evaluation of single run result, with non-zero packet
- loss tolerance (LT) expressed in percentage of packets transmitted.
-
-.. topic:: NDRDISC
-
- Non Drop Rate evaluation of results. Loss acceptance of dropped packets is
- set to zero lost packets.
-
-.. topic:: NDRCHK
-
- Performance tests where TG verifies DUTs' throughput at ref-NDR (reference
- Non Drop Rate) with zero packet loss tolerance.
-
-.. topic:: NDRPDRDISC
-
- Find performance of DUT based on RFC2544 with linear / binary / combined
- search. (Previous LONG tests.)
-
-Ethernet frame size tags for performance tests
-----------------------------------------------
-
-.. topic:: 64B
-
- 64B frames used for test.
-
-.. topic:: 78B
-
- 78B frames used for test.
-
-.. topic:: IMIX
-
- IMIX frame sequence (28x 64B, 16x 570B, 4x 1518B) used for test.
-
-.. topic:: 1460B
-
- 1460B frames used for test.
-
-.. topic:: 1480B
-
- 1480B frames used for test.
-
-.. topic:: 1514B
-
- 1514B frames used for test.
-
-.. topic:: 1518B
-
- 1518B frames used for test.
-
-.. topic:: 9000B
-
- 9000B frames used for test.
-
-Test type tags
---------------
-
-.. topic:: BASE
-
- Baseline test cases, no encapsulation, no feature(s) configured in tests.
-
-.. topic:: IP4BASE
-
- IPv4 baseline test cases, no encapsulation, no feature(s) configured in
- tests.
-
-.. topic:: IP6BASE
-
- IPv6 baseline test cases, no encapsulation, no feature(s) configured in
- tests.
-
-.. topic:: L2XCBASE
-
- L2XC baseline test cases, no encapsulation, no feature(s) configured in
- tests.
-
-.. topic:: L2BDBASE
-
- L2BD baseline test cases, no encapsulation, no feature(s) configured in
- tests.
-
-.. topic:: SCALE
-
- Scale test cases.
-
-.. topic:: ENCAP
-
- Test cases where encapsulation is used. Use also encapsulation tag(s).
-
-.. topic:: FEATURE
-
- At least one feature is configured in test cases. Use also feature tag(s).
-
-
-Forwarding mode tags
---------------------
-
-.. topic:: L2BDMACSTAT
-
- VPP L2 bridge-domain, L2 MAC static.
-
-.. topic:: L2BDMACLRN
-
- VPP L2 bridge-domain, L2 MAC learning.
-
-.. topic:: L2XCFWD
-
- VPP L2 point-to-point cross-connect.
-
-.. topic:: IP4FWD
-
- VPP IPv4 routed forwarding.
-
-.. topic:: IP6FWD
-
- VPP IPv6 routed forwarding.
-
-
-Underlay tags
--------------
-
-.. topic:: IP4UNRLAY
-
- IPv4 underlay.
-
-.. topic:: IP6UNRLAY
-
- IPv6 underlay.
-
-.. topic:: MPLSUNRLAY
-
- MPLS underlay.
-
-
-Overlay tags
-------------
-
-.. topic:: L2OVRLAY
-
- L2 overlay.
-
-.. topic:: IP4OVRLAY
-
- IPv4 overlay (IPv4 payload).
-
-.. topic:: IP6OVRLAY
-
- IPv6 overlay (IPv6 payload).
-
-
-Encapsulation tags
-------------------
-
-.. topic:: ETH
-
- All test cases with base Ethernet (no encapsulation).
-
-.. topic:: DOT1Q
-
- All test cases with dot1q.
-
-.. topic:: DOT1AD
-
- All test cases with dot1ad.
-
-.. topic:: LISP
-
- All test cases with LISP.
-
-.. topic:: LISPGPE
-
- All test cases with LISP-GPE.
-
-.. topic:: VXLAN
-
- All test cases with Vxlan.
-
-.. topic:: VXLANGPE
-
- All test cases with VXLAN-GPE.
-
-.. topic:: GRE
-
- All test cases with GRE.
-
-.. topic:: IPSEC
-
- All test cases with IPSEC.
-
-
-Interface tags
---------------
-
-.. topic:: PHY
-
- All test cases which use physical interface(s).
-
-.. topic:: VHOST
-
- All test cases which uses VHOST.
-
-.. topic:: TUNTAP
-
- All test cases which uses TUN and TAP.
-
-.. topic:: AFPKT
-
- All test cases which uses AFPKT.
-
-.. topic:: NETMAP
-
- All test cases which uses Netmap.
-
-
-Feature tags
-------------
-
-.. topic:: IACLDST
-
- iACL destination.
-
-.. topic:: COPWHLIST
-
- COP whitelist.
-
-.. topic:: SNAT
-
- SNAT configured and tested.
-
-
-Encryption tags
----------------
-
-.. topic:: IPSECSW
-
- Crypto in software.
-
-.. topic:: IPSECHW
-
- Crypto in hardware.
-
-.. topic:: IPSECTRAN
-
- IPSec in transport mode.
-
-.. topic:: IPSECTUN
-
- IPSec in tunnel mode.
-
-
-Client-workload tags
---------------------
-
-.. topic:: VM
-
- All test cases which use at least one virtual machine.
-
-.. topic:: LXC
-
- All test cases which use Linux container.
-
-.. topic:: APP
-
- All test cases with specific APP use.
-
-
-Multi-threading tags
---------------------
-
-.. topic:: STHREAD
-
- All test cases using single poll mode thread.
-
-.. topic:: MTHREAD
-
- All test cases using more then one poll mode driver thread.
-
-.. topic:: 1NUMA
-
- All test cases with packet processing on single socket.
-
-.. topic:: 2NUMA
-
- All test cases with packet processing on two sockets.
-
-.. topic:: SMT
-
- All test cases with symmetric Multi-Threading (HyperThreading) enabled.
-
-.. topic:: NOSMT
-
- All test cases with symmetric Multi-Threading (HyperThreading) disabled.
-
-.. topic:: 1T1C
-
- 1 worker thread pinned to 1 dedicated physical core. 1 receive queue per
- interface. Main thread pinned to core 0.
-
-.. topic:: 2T2C
-
- 2 worker threads pinned to 2 dedicated physical cores. 1 receive queue per
- interface. Main thread pinned to core 0.
-
-.. topic:: 4T4C
-
- 4 worker threads pinned to 4 dedicated physical cores. 2 receive queues per
- interface. Main thread pinned to core 0.
-
-.. topic:: 6T6C
-
- 6 worker threads pinned to 6 dedicated physical cores. 3 receive queues per
- interface. Main thread pinned to core 0.
-
-.. topic:: 8T8C
-
- 8 worker threads pinned to 8 dedicated physical cores. 4 receive queues per
- interface. Main thread pinned to core 0.
+.. include:: ../../tag_documentation.rst
+ :start-line: 8
Code Review / csit.git / blobdiff