CSIT-1342: Edit the static content for CSIT-1810 report

[csit.git] / docs / report / introduction / methodology.rst

diff --git a/docs/report/introduction/methodology.rst b/docs/report/introduction/methodology.rst
index 28bcf68..89db393 100644 (file)
--- a/docs/report/introduction/methodology.rst
+++ b/docs/report/introduction/methodology.rst
@@ -15,15 +15,14 @@ different Packet Loss Ratio (PLR) values.
 Following MLRsearch values are measured across a range of L2 frame sizes
 and reported:
 
-- **Non Drop Rate (NDR)**: packet and bandwidth throughput at PLR=0%.
+- NON DROP RATE (NDR): packet and bandwidth throughput at PLR=0%.
 
   - **Aggregate packet rate**: NDR_LOWER <bi-directional packet rate>
     pps.
   - **Aggregate bandwidth rate**: NDR_LOWER <bi-directional bandwidth
     rate> Gbps.
 
-- **Partial Drop Rate (PDR)**: packet and bandwidth throughput at
-  PLR=0.5%.
+- PARTIAL DROP RATE (PDR): packet and bandwidth throughput at PLR=0.5%.
 
   - **Aggregate packet rate**: PDR_LOWER <bi-directional packet rate>
     pps.
@@ -167,7 +166,7 @@ Input Parameters
    Default (2). (Value chosen based on limited experimentation to date.
    More experimentation needed to arrive to clearer guidelines.)
 
-Initial phase
+Initial Phase
 `````````````
 
 1. First trial measures at maximum rate and discovers MRR.
@@ -193,7 +192,7 @@ Initial phase
    c. *do*: single trial.
    d. *out*: measured loss ratio.
 
-Non-initial phases
+Non-initial Phases
 ``````````````````
 
 1. Main loop:
@@ -632,7 +631,7 @@ created (one for each direction) with TRex flow_stats parameter set to
 STLFlowLatencyStats. In that case, returned statistics will also include
 min/avg/max latency values.
 
-HTTP/TCP with WRK tool
+HTTP/TCP with WRK Tool
 ----------------------
 
 `WRK HTTP benchmarking tool <https://github.com/wg/wrk>`_ is used for