Code Review
/
csit.git
/ blobdiff
commit
grep
author
committer
pickaxe
?
search:
re
summary
|
shortlog
|
log
|
commit
|
commitdiff
|
review
|
tree
raw
|
inline
| side by side
Docs: Update report sections
[csit.git]
/
docs
/
report
/
introduction
/
methodology_trex_traffic_generator.rst
diff --git
a/docs/report/introduction/methodology_trex_traffic_generator.rst
b/docs/report/introduction/methodology_trex_traffic_generator.rst
index
4d4de96
..
0d19c2c
100644
(file)
--- a/
docs/report/introduction/methodology_trex_traffic_generator.rst
+++ b/
docs/report/introduction/methodology_trex_traffic_generator.rst
@@
-6,15
+6,14
@@
Usage
`TRex traffic generator <https://wiki.fd.io/view/TRex>`_ is used for all
CSIT performance tests. TRex stateless mode is used to measure NDR and
`TRex traffic generator <https://wiki.fd.io/view/TRex>`_ is used for all
CSIT performance tests. TRex stateless mode is used to measure NDR and
-PDR throughputs using binary search (NDR and PDR discovery tests) and
-for quick checks of DUT performance against the reference NDRs (NDR
-check tests) for specific configuration.
+PDR throughputs using MLRsearch and to measure maximum transer rate
+in MRR tests.
TRex is installed and run on the TG compute node. The typical procedure
is:
- If the TRex is not already installed on TG, it is installed in the
TRex is installed and run on the TG compute node. The typical procedure
is:
- If the TRex is not already installed on TG, it is installed in the
- suite setup phase - see `TRex intallation`_.
+ suite setup phase - see `TRex in
s
tallation`_.
- TRex configuration is set in its configuration file
::
- TRex configuration is set in its configuration file
::
@@
-23,11
+22,11
@@
is:
- TRex is started in the background mode
::
- TRex is started in the background mode
::
- $ sh -c 'cd <t-rex-install-dir>/scripts/ && sudo nohup ./t-rex-64 -i -c 7 --
iom 0
> /tmp/trex.log 2>&1 &' > /dev/null
+ $ sh -c 'cd <t-rex-install-dir>/scripts/ && sudo nohup ./t-rex-64 -i -c 7 --
prefix $(hostname) --hdrh
> /tmp/trex.log 2>&1 &' > /dev/null
- There are traffic streams dynamically prepared for each test, based on traffic
profiles. The traffic is sent and the statistics obtained using
- There are traffic streams dynamically prepared for each test, based on traffic
profiles. The traffic is sent and the statistics obtained using
- :command:`trex
_stl_lib
.api.STLClient`.
+ :command:`trex
.stl
.api.STLClient`.
Measuring Packet Loss
~~~~~~~~~~~~~~~~~~~~~
Measuring Packet Loss
~~~~~~~~~~~~~~~~~~~~~