Revert "fix(IPsecUtil): Delete keywords no longer used"

[csit.git] / docs / report / trex_performance_tests / overview.rst

diff --git a/docs/report/trex_performance_tests/overview.rst b/docs/report/trex_performance_tests/overview.rst
deleted file mode 100644 (file)
index 9740179..0000000
--- a/docs/report/trex_performance_tests/overview.rst
+++ /dev/null
@@ -1,82 +0,0 @@
-Overview
-========
-
-TREX performance test results are reported for a range of processors.
-For description of physical testbeds used for TREX performance tests
-please refer to :ref:`tested_physical_topologies`.
-
-Logical Topology
-----------------
-
-CSIT TREX performance tests are executed on physical testbeds described
-in :ref:`tested_physical_topologies`. Logical topology use 1 nic that has
-loopback connected ports. See figure below.
-
-.. only:: latex
-
-    .. raw:: latex
-
-        \begin{figure}[H]
-            \centering
-                \graphicspath{{../_tmp/src/trex_performance_tests/}}
-                \includegraphics[width=0.90\textwidth]{logical-TRex-nic2nic}
-                \label{fig:logical-TRex-nic2nic}
-        \end{figure}
-
-.. only:: html
-
-    .. figure:: logical-TRex-nic2nic.svg
-        :alt: logical-TRex-nic2nic
-        :align: center
-
-
-Performance Tests Coverage
---------------------------
-
-Performance tests measure following metrics for tested TRex
-topologies and configurations:
-
-- Packet Throughput: measured in accordance with :rfc:`2544`, using
-  FD.io CSIT Multiple Loss Ratio search (MLRsearch), an optimized binary
-  search algorithm, producing throughput at different Packet Loss Ratio
-  (PLR) values:
-
-  - Non Drop Rate (NDR): packet throughput at PLR=0%.
-  - Partial Drop Rate (PDR): packet throughput at PLR=0.5%.
-
-- Two-way Packet Latency: measured both east-west and west-east at different
-  offered packet loads:
-
-  - 90% of discovered PDR throughput.
-  - 50% of discovered PDR throughput.
-  - 10% of discovered PDR throughput.
-  - Minimal offered load.
-
-|csit-release| includes following TRex data plane functionality
-performance tested across a range of NIC drivers and NIC models:
-
-+-----------------------+----------------------------------------------+
-| Functionality         |  Description                                 |
-+=======================+==============================================+
-| IPv4 Base             | IPv4 routing.                                |
-+-----------------------+----------------------------------------------+
-| IPv4 Scale            | IPv4 routing with 2M entries.                |
-+-----------------------+----------------------------------------------+
-| IPv6 Base             | IPv6 routing.                                |
-+-----------------------+----------------------------------------------+
-| IPv6 Scale            | IPv6 routing with 2M entries.                |
-+-----------------------+----------------------------------------------+
-| L2BD Scale            | L2 Bridge-Domain switching of untagged       |
-|                       | Ethernet frames.                             |
-+-----------------------+----------------------------------------------+
-
-
-Performance Tests Naming
-------------------------
-
-FD.io |csit-release| follows a common structured naming convention for
-all performance and system functional tests, introduced in CSIT-17.01.
-
-The naming should be intuitive for majority of the tests. Complete
-description of FD.io CSIT test naming convention is provided on
-:ref:`csit_test_naming`.