\r
- All hosts are Cisco UCS C240-M4 (2x Intel(R) Xeon(R) CPU E5-2699 v3 @2.30GHz,\r
18c, 512GB RAM)\r
+\r
- tb4-virl1:\r
\r
- Status: Production\r
\r
- tb4-virl3:\r
\r
- - Status: Production\r
- - OS: Ubuntu 14.04.3\r
- - STD server version 0.10.24.7\r
- - UWM server version 0.10.24.7\r
+ - Status: Testing\r
+ - OS: Ubuntu 16.04.2\r
+ - STD server version 0.10.32.19\r
+ - UWM server version 0.10.32.19\r
\r
Whenever a patch is submitted to gerrit for review, parallel VIRL simulations\r
are started to reduce the time of execution of all functional tests. The number\r
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend\r
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)\r
||/ Name Version Architecture Description\r
- +++-==============-=============-============-=============================================\r
- ii vpp 17.07-release amd64 Vector Packet Processing--executables\r
- ii vpp-dbg 17.07-release amd64 Vector Packet Processing--debug symbols\r
- ii vpp-dev 17.07-release amd64 Vector Packet Processing--development support\r
- ii vpp-dpdk-dev 17.07-release amd64 Vector Packet Processing--development support\r
- ii vpp-dpdk-dkms 17.07-release amd64 DPDK 2.1 igb_uio_driver\r
- ii vpp-lib 17.07-release amd64 Vector Packet Processing--runtime libraries\r
- ii vpp-plugins 17.07-release amd64 Vector Packet Processing--runtime plugins\r
+ +++-==============-=============-============-=================================================\r
+ ii vpp 18.04-release amd64 Vector Packet Processing--executables\r
+ ii vpp-dbg 18.04-release amd64 Vector Packet Processing--debug symbols\r
+ ii vpp-dev 18.04-release amd64 Vector Packet Processing--development support\r
+ ii vpp-dpdk-dkms 18.02-vpp1 amd64 DPDK Development Package for VPP - Kernel Modules\r
+ ii vpp-lib 18.04-release amd64 Vector Packet Processing--runtime libraries\r
+ ii vpp-plugins 18.04-release amd64 Vector Packet Processing--runtime plugins\r
\r
**VPP Startup Configuration**\r
\r
-VPP startup configuration is common for all test cases.\r
+VPP startup configuration is common for all test cases except test cases related\r
+to SW Crypto device.\r
+\r
+**Default**\r
\r
::\r
\r
$ cat /etc/vpp/startup.conf\r
unix {\r
nodaemon\r
- log /tmp/vpp.log\r
+ log /var/log/vpp/vpp.log\r
full-coredump\r
+ cli-listen /run/vpp/cli.sock\r
+ gid vpp\r
}\r
\r
api-trace {\r
+ ## This stanza controls binary API tracing. Unless there is a very strong reason,\r
+ ## please leave this feature enabled.\r
on\r
+ ## Additional parameters:\r
+ ##\r
+ ## To set the number of binary API trace records in the circular buffer, configure nitems\r
+ ##\r
+ ## nitems <nnn>\r
+ ##\r
+ ## To save the api message table decode tables, configure a filename. Results in /tmp/<filename>\r
+ ## Very handy for understanding api message changes between versions, identifying missing\r
+ ## plugins, and so forth.\r
+ ##\r
+ ## save-api-table <filename>\r
}\r
\r
api-segment {\r
# scheduler-priority 50\r
}\r
\r
- dpdk {\r
+ # dpdk {\r
## Change default settings for all intefaces\r
# dev default {\r
## Number of receive queues, enables RSS\r
# num-rx-queues 2\r
# }\r
\r
- ## Change UIO driver used by VPP, Options are: uio_pci_generic, vfio-pci\r
- ## and igb_uio (default)\r
- # uio-driver uio_pci_generic\r
+ ## Specify bonded interface and its slaves via PCI addresses\r
+ ##\r
+ ## Bonded interface in XOR load balance mode (mode 2) with L3 and L4 headers\r
+ # vdev eth_bond0,mode=2,slave=0000:02:00.0,slave=0000:03:00.0,xmit_policy=l34\r
+ # vdev eth_bond1,mode=2,slave=0000:02:00.1,slave=0000:03:00.1,xmit_policy=l34\r
+ ##\r
+ ## Bonded interface in Active-Back up mode (mode 1)\r
+ # vdev eth_bond0,mode=1,slave=0000:02:00.0,slave=0000:03:00.0\r
+ # vdev eth_bond1,mode=1,slave=0000:02:00.1,slave=0000:03:00.1\r
+\r
+ ## Change UIO driver used by VPP, Options are: igb_uio, vfio-pci,\r
+ ## uio_pci_generic or auto (default)\r
+ # uio-driver vfio-pci\r
\r
## Disable mutli-segment buffers, improves performance but\r
## disables Jumbo MTU support\r
\r
## Increase number of buffers allocated, needed only in scenarios with\r
## large number of interfaces and worker threads. Value is per CPU socket.\r
- ## Default is 32768\r
+ ## Default is 16384\r
# num-mbufs 128000\r
\r
## Change hugepages allocation per-socket, needed only if there is need for\r
## larger number of mbufs. Default is 256M on each detected CPU socket\r
# socket-mem 2048,2048\r
+\r
+ ## Disables UDP / TCP TX checksum offload. Typically needed for use\r
+ ## faster vector PMDs (together with no-multi-seg)\r
+ # no-tx-checksum-offload\r
+ # }\r
+\r
+\r
+ # plugins {\r
+ ## Adjusting the plugin path depending on where the VPP plugins are\r
+ # path /home/bms/vpp/build-root/install-vpp-native/vpp/lib64/vpp_plugins\r
+\r
+ ## Disable all plugins by default and then selectively enable specific plugins\r
+ # plugin default { disable }\r
+ # plugin dpdk_plugin.so { enable }\r
+ # plugin acl_plugin.so { enable }\r
+\r
+ ## Enable all plugins by default and then selectively disable specific plugins\r
+ # plugin dpdk_plugin.so { disable }\r
+ # plugin acl_plugin.so { disable }\r
+ # }\r
+\r
+ ## Alternate syntax to choose plugin path\r
+ # plugin_path /home/bms/vpp/build-root/install-vpp-native/vpp/lib64/vpp_plugins\r
+\r
+**SW Crypto Device**\r
+\r
+::\r
+\r
+ $ cat /etc/vpp/startup.conf\r
+ unix\r
+ {\r
+ cli-listen /run/vpp/cli.sock\r
+ gid vpp\r
+ nodaemon\r
+ full-coredump\r
+ log /tmp/vpp.log\r
+ }\r
+ api-segment\r
+ {\r
+ gid vpp\r
+ }\r
+ dpdk\r
+ {\r
+ vdev cryptodev_aesni_gcm_pmd,socket_id=0\r
+ vdev cryptodev_aesni_mb_pmd,socket_id=0\r
}\r
\r
TG Configuration\r