-CSIT Release Notes\r
-==================\r
-\r
-Changes in CSIT |release|\r
--------------------------\r
-\r
-#. Added VPP performance tests\r
-\r
- - **L2BD MAC scale tests**\r
-\r
- - VPP L2 Bridge-Domain with MAC learning and large size L2FIB (10k,\r
- 100k, 1M MACs), tested in NIC-to-NIC and VM vhost topologies.\r
-\r
- - **Linux Container VPP memif tests**\r
-\r
- - Tests with VPP in L2 Bridge-Domain configuration connecting over\r
- memif virtual interfaces to VPPs running in LXCs;\r
-\r
- - **Docker Container VPP memif tests**\r
-\r
- - Tests with VPP in L2 Cross-Connect configuration connecting over\r
- memif virtual interfaces VPPs running in Docker containers;\r
-\r
- - **Container Topologies Orchestrated by K8s with VPP memif tests**\r
-\r
- - Tests with VPP in L2 Cross-Connect and Bridge-Domain configurations\r
- connecting over memif virtual interfaces VPPs running in Docker\r
- containers, with service chain topologies orchestrated by Kubernetes;\r
-\r
- - **Stateful Security Groups**\r
-\r
- - m-thread m-core VPP stateful and stateless security-groups tests;\r
-\r
- - **MAC-IP binding**\r
-\r
- - MACIP input access-lists, single-thread single-core and m-thread\r
- m-core tests;\r
-\r
-#. Presentation and Analytics Layer\r
-\r
- - New Presentation and Analytics Layer (PAL) for automated CSIT test\r
- results analysis and presentation, including statistical analysis\r
- of results repeatibility and test report auto-generation;\r
-\r
-Performance Improvements\r
-------------------------\r
-\r
-Substantial improvements in measured packet throughput have been observed in a\r
-number of CSIT |release| tests listed below, with relative increase of\r
-double-digit percentage points. Relative improvements for this release are\r
-calculated against the test results listed in CSIT |release-1| report. The\r
-comparison is calculated between the mean values based on collected and\r
-archived test results' samples for involved VPP releases. Standard deviation\r
-has been also listed for CSIT |release|. Performance numbers since release\r
-VPP-16.09 are provided for reference.\r
-\r
-NDR Throughput\r
-~~~~~~~~~~~~~~\r
-\r
-Non-Drop Rate Throughput discovery tests:\r
-\r
-.. only:: html\r
-\r
- .. csv-table::\r
- :align: center\r
- :file: performance_improvements/performance_improvements_ndr_top.csv\r
-\r
-.. only:: latex\r
-\r
- .. raw:: latex\r
-\r
- \makeatletter\r
- \csvset{\r
- perfimprovements column width/.style={after head=\csv@pretable\begin{longtable}{ m{1.5cm} m{4cm} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1}}\csv@tablehead},\r
- }\r
- \makeatother\r
-\r
- {\tiny\r
- \csvautobooklongtable[separator=comma,\r
- respect all,\r
- no check column count,\r
- perfimprovements column width=1cm,\r
- late after line={\\\hline},\r
- late after last line={\end{longtable}}\r
- ]{../_tmp/src/vpp_performance_tests/performance_improvements/performance_improvements_ndr_top.csv}\r
- }\r
-\r
-\r
-PDR Throughput\r
-~~~~~~~~~~~~~~\r
-\r
-Partial Drop Rate thoughput discovery tests with packet Loss Tolerance of 0.5%:\r
-\r
-.. only:: html\r
-\r
- .. csv-table::\r
- :align: center\r
- :file: performance_improvements/performance_improvements_pdr_top.csv\r
-\r
-.. only:: latex\r
-\r
- .. raw:: latex\r
-\r
- \makeatletter\r
- \csvset{\r
- perfimprovements column width/.style={after head=\csv@pretable\begin{longtable}{ m{1.5cm} m{4cm} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1}}\csv@tablehead},\r
- }\r
- \makeatother\r
-\r
- {\tiny\r
- \csvautobooklongtable[separator=comma,\r
- respect all,\r
- no check column count,\r
- perfimprovements column width=1cm,\r
- late after line={\\\hline},\r
- late after last line={\end{longtable}}\r
- ]{../_tmp/src/vpp_performance_tests/performance_improvements/performance_improvements_pdr_top.csv}\r
- }\r
-\r
-\r
-Measured improvements are in line with VPP code optimizations listed in\r
-`VPP-17.10 release notes\r
-<https://docs.fd.io/vpp/17.10/release_notes_1710.html>`_.\r
-\r
-Other Performance Changes\r
--------------------------\r
-\r
-Other changes in measured packet throughput, with either minor relative increase\r
-or decrease, have been observed in a number of CSIT |release| tests listed\r
-below. Relative changes are calculated against the test results listed in CSIT\r
-|release-1| report.\r
-\r
-NDR Throughput\r
-~~~~~~~~~~~~~~\r
-\r
-Non-Drop Rate Throughput discovery tests:\r
-\r
-.. only:: html\r
-\r
- .. csv-table::\r
- :align: center\r
- :file: performance_improvements/performance_improvements_ndr_low.csv\r
-\r
-.. only:: latex\r
-\r
- .. raw:: latex\r
-\r
- \makeatletter\r
- \csvset{\r
- perfimprovements column width/.style={after head=\csv@pretable\begin{longtable}{ m{1.5cm} m{4cm} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1}}\csv@tablehead},\r
- }\r
- \makeatother\r
-\r
- {\tiny\r
- \csvautobooklongtable[separator=comma,\r
- respect all,\r
- no check column count,\r
- perfimprovements column width=1cm,\r
- late after line={\\\hline},\r
- late after last line={\end{longtable}}\r
- ]{../_tmp/src/vpp_performance_tests/performance_improvements/performance_improvements_ndr_low.csv}\r
- }\r
-\r
-\r
-PDR Throughput\r
-~~~~~~~~~~~~~~\r
-\r
-Partial Drop Rate thoughput discovery tests with packet Loss Tolerance of 0.5%:\r
-\r
-.. only:: html\r
-\r
- .. csv-table::\r
- :align: center\r
- :file: performance_improvements/performance_improvements_pdr_low.csv\r
-\r
-.. only:: latex\r
-\r
- .. raw:: latex\r
-\r
- \makeatletter\r
- \csvset{\r
- perfimprovements column width/.style={after head=\csv@pretable\begin{longtable}{ m{1.5cm} m{4cm} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1}}\csv@tablehead},\r
- }\r
- \makeatother\r
-\r
- {\tiny\r
- \csvautobooklongtable[separator=comma,\r
- respect all,\r
- no check column count,\r
- perfimprovements column width=1cm,\r
- late after line={\\\hline},\r
- late after last line={\end{longtable}}\r
- ]{../_tmp/src/vpp_performance_tests/performance_improvements/performance_improvements_pdr_low.csv}\r
- }\r
-\r
-\r
-Known Issues\r
-------------\r
-\r
-Here is the list of known issues in CSIT |release| for VPP performance tests:\r
-\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| # | Issue | Jira ID | Description |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 1 | Vic1385 and Vic1227 low performance. | VPP-664 | Low NDR performance. |\r
-| | | | |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 2 | Sporadic NDR discovery test failures on x520. | CSIT-750 | Suspected issue with HW settings (BIOS, FW) in LF |\r
-| | | | infrastructure. Issue can't be replicated outside LF. |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 3 | VPP in 2t2c setups - large variation | CSIT-568 | Suspected NIC firmware or DPDK driver issue affecting NDR |\r
-| | of discovered NDR throughput values across | | throughput. Applies to XL710 and X710 NICs, x520 NICs are fine. |\r
-| | multiple test runs with xl710 and x710 NICs. | | |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 4 | Lower than expected NDR throughput with | CSIT-569 | Suspected NIC firmware or DPDK driver issue affecting NDR and |\r
-| | xl710 and x710 NICs, compared to x520 NICs. | | PDR throughput. Applies to XL710 and X710 NICs. |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-\r
+CSIT Release Notes
+==================
+
+Changes in CSIT |release|
+-------------------------
+
+#. **VPP performance tests**
+
+ - *MRR tests* - New Maximum Receive Rate tests measure the packet
+ forwarding rate under the maximum load offered by traffic
+ generator over a set trial duration, regardless of packet loss.
+ MRR tests are used for continuous performance trending and for
+ comparison between releases.
+
+ - *Service Chaining with SRv6* - New SRv6 (Segment Routing IPv6) proxy
+ tests measure performance of SRv6 Endpoint fronting SR-unaware
+ appliance via masquerading (End.AM), dynamic proxy (End.AD) or
+ static proxy (End.AS) SR functions.
+
+#. **Presentation and Analytics Layer**
+
+ - *Performance trending* - Added continuous performance trending and
+ analysis. New Performance Trending and Performance Analysis jobs
+ executed regular throughput tests, with results being subsequently
+ analysed and trend and anomalies summarized and presented in VPP
+ Performance Dashboard and trendline graphs.
+
+#. **Test Framework Optimizations**
+
+ - *Performance tests efficiency* - Qemu build/install optimizations,
+ warmup phase handling, vpp restart handling. Resulted in improved
+ stability and reduced total execution time by 30% for single pkt
+ size e.g. 64B/78B.
+
+ - *General code housekeeping* - ongoing RF keywords optimizations,
+ removal of redundant RF keywords.
+
+Performance Changes
+-------------------
+
+Relative performance changes in measured packet throughput in CSIT
+|release| are calculated against the results from CSIT |release-1|
+report. Listed mean and standard deviation values are computed based on
+a series of the same tests executed against respective VPP releases to
+verify test results repeatibility, with percentage change calculated for
+mean values. Note that the standard deviation is quite high for a small
+number of packet throughput tests, what indicates poor test results
+repeatability and makes the relative change of mean throughput value not
+fully representative for these tests. The root causes behind poor
+results repeatibility vary between the test cases.
+
+NDR Changes
+~~~~~~~~~~~
+
+NDR small packet throughput changes between releases are available in a
+CSV and pretty ASCII formats:
+
+ - `csv format for 1t1c <../_static/vpp/performance-changes-ndr-1t1c-full.csv>`_,
+ - `csv format for 2t2c <../_static/vpp/performance-changes-ndr-2t2c-full.csv>`_,
+ - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-ndr-1t1c-full.txt>`_,
+ - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-ndr-2t2c-full.txt>`_.
+
+.. note::
+
+ Test results have been generated by
+ `FD.io test executor vpp performance jobs`_ with Robot Framework result
+ files csit-vpp-perf-|srelease|-\*.zip `archived here <../_static/archive/>`_.
+
+PDR Changes
+~~~~~~~~~~~
+
+NDR small packet throughput changes between releases are available in a
+CSV and pretty ASCII formats:
+
+ - `csv format for 1t1c <../_static/vpp/performance-changes-pdr-1t1c-full.csv>`_,
+ - `csv format for 2t2c <../_static/vpp/performance-changes-pdr-2t2c-full.csv>`_,
+ - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-pdr-1t1c-full.txt>`_,
+ - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-pdr-2t2c-full.txt>`_.
+
+.. note::
+
+ Test results have been generated by
+ `FD.io test executor vpp performance jobs`_ with Robot Framework result
+ files csit-vpp-perf-|srelease|-\*.zip `archived here <../_static/archive/>`_.
+
+MRR Changes
+~~~~~~~~~~~
+
+MRR small packet throughput changes between releases are available in a
+CSV and pretty ASCII formats:
+
+ - `csv format for 1t1c <../_static/vpp/performance-changes-mrr-1t1c-full.csv>`_,
+ - `csv format for 2t2c <../_static/vpp/performance-changes-mrr-2t2c-full.csv>`_,
+ - `csv format for 4t4c <../_static/vpp/performance-changes-mrr-4t4c-full.csv>`_,
+ - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-mrr-1t1c-full.txt>`_,
+ - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-mrr-2t2c-full.txt>`_,
+ - `pretty ASCII format for 4t4c <../_static/vpp/performance-changes-mrr-4t4c-full.txt>`_.
+
+.. note::
+
+ Test results have been generated by
+ `FD.io test executor vpp mrr jobs <https://jenkins.fd.io/view/csit/job/csit-vpp-perf-mrr-daily-master/>`_
+ with Robot Framework result files csit-vpp-perf-mrr-daily-master__*__output.xml.gz
+ `archived here <https://docs.fd.io/csit/master/trending/_static/archive/>`_.
+
+Throughput Trending
+-------------------
+
+In addition to reporting throughput changes between VPP releases, CSIT
+provides continuous performance trending for VPP master branch:
+
+#. `VPP Performance Dashboard <https://docs.fd.io/csit/master/trending/introduction/index.html>`_
+ - per VPP test case throughput trend, trend compliance and summary of
+ detected anomalies.
+
+#. `Trending Methodology <https://docs.fd.io/csit/master/trending/methodology/index.html>`_
+ - throughput test metrics, trend calculations and anomaly
+ classification (progression, regression, outlier).
+
+#. `Trendline Graphs <https://docs.fd.io/csit/master/trending/trending/index.html>`_
+ - per VPP build MRR throughput measurements against the trendline
+ with anomaly highlights, with associated CSIT test jobs.
+
+Known Issues
+------------
+
+List of known issues in CSIT |release| for VPP performance tests:
+
++---+-------------------------------------------------+------------+-----------------------------------------------------------------+
+| # | Issue | Jira ID | Description |
++===+=================================================+============+=================================================================+
+| 1 | Sporadic (1 in 200) NDR discovery test failures | CSIT-570 | DPDK reporting rx-errors, indicating L1 issue. Suspected issue |
+| | on x520. | | with HW combination of X710-X520 in LF testbeds. Not observed |
+| | | | outside of LF testbeds. |
++---+-------------------------------------------------+------------+-----------------------------------------------------------------+
+| 2 | Lower than expected NDR throughput of DPDK | CSIT-571 | Suspected NIC firmware or DPDK driver issue affecting NDR and |
+| | testpmd and VPP L2 path NDR throughput with | | PDR throughput on XL710 and X710 NICs. |
+| | xl710 and x710 NICs, compared to x520 NICs. | | |
++---+-------------------------------------------------+------------+-----------------------------------------------------------------+
+| 3 | Tagged Ethernet dot1q and dot1ad L2 path | CSIT-1066 | Tagged Ethernet dot1q and dot1ad L2 path throughput regression: |
+| | throughput regression. | | NDR -2%..-5%, PDR -2%..-6%, MRR. Affects l2xc and l2bd |
+| | | | performance tests. |
++---+-------------------------------------------------+------------+-----------------------------------------------------------------+
+| 4 | IPSec (software, no QAT HW) throughput | CSIT-1064 | IPSec throughput regression: NDR -3%..-8%, PDR -2%..-8%, MRR |
+| | regression. | | -3%..-7%. Affects IPSec SW tests, QAT HW tests not affected. |
++---+-------------------------------------------------+------------+-----------------------------------------------------------------+
+| 5 | High failure rate of creating working container | CSIT-1065 | About 20% of orchestrated container topology tests failing data |
+| | topologies with K8s/Ligato orchestration. | | plane verification indicating configuration issue. Suspected |
+| | | | issue with Ligato vpp-agent. |
++---+-------------------------------------------------+------------+-----------------------------------------------------------------+
Code Review / csit.git / blobdiff