-CSIT Release Notes\r
-==================\r
-\r
-Changes in CSIT |release|\r
--------------------------\r
-\r
-#. **Added VPP performance tests**\r
-\r
- - **MRR tests** : New MRR tests measure the packet forwarding rate\r
- under the maximum load offered by traffic generator over a set\r
- trial duration, regardless of packet loss. Maximum load for\r
- specified Ethernet frame size is set to the bi-directional link\r
- rate. MRR tests are used for continuous performance trending and\r
- for comparison between releases.\r
-\r
- - **Service Chaining with SRv6** : SRv6 (Segment Routing IPv6) proxy tests\r
- verifying performance of Endpoint to SR-unaware appliance via\r
- masquerading (End.AM), dynamic proxy (End.AD) or static proxy (End.AS)\r
- functions.\r
-\r
-#. **Presentation and Analytics Layer (PAL)**\r
-\r
- - Added continuous performance measuring, trending and anomaly\r
- detection. Includes new PAL code and Jenkins jobs for Performance\r
- Trending (PT) and Performance Analysis (PA) producing performance\r
- trending dashboard and trendline graphs with summary and drill-\r
- down views across all specified tests that can be reviewed and\r
- inspected regularly by FD.io developers and users community.\r
-\r
-#. **Test Framework Optimizations**\r
-\r
- - **Performance tests efficiency** : Qemu build/install\r
- optimizations, warmup phase handling, vpp restart handling.\r
- Resulted in improved stability and reduced total execution time by\r
- 30% for single pkt size e.g. 64B/78B.\r
-\r
- - **General code housekeeping** : ongoing RF keywords\r
- optimizations, removal of redundant RF keywords.\r
-\r
-Performance Changes\r
--------------------\r
-\r
-Relative performance changes in measured packet throughput in CSIT\r
-|release| are calculated against the results from CSIT |release-1|\r
-report. Listed mean and standard deviation values are computed based on\r
-a series of the same tests executed against respective VPP releases to\r
-verify test results repeatibility, with percentage change calculated for\r
-mean values. Note that the standard deviation is quite high for a small\r
-number of packet throughput tests, what indicates poor test results\r
-repeatability and makes the relative change of mean throughput value not\r
-fully representative for these tests. The root causes behind poor\r
-results repeatibility vary between the test cases.\r
-\r
-NDR Throughput Changes\r
-~~~~~~~~~~~~~~~~~~~~~~\r
-\r
-NDR small packet throughput changes between releases are available in a CSV and\r
-pretty ASCII formats:\r
-\r
- - `csv format for 1t1c <../_static/vpp/performance-changes-ndr-1t1c-full.csv>`_,\r
- - `csv format for 2t2c <../_static/vpp/performance-changes-ndr-2t2c-full.csv>`_,\r
- - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-ndr-1t1c-full.txt>`_,\r
- - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-ndr-2t2c-full.txt>`_.\r
-\r
-PDR Throughput Changes\r
-~~~~~~~~~~~~~~~~~~~~~~\r
-\r
-NDR small packet throughput changes between releases are available in a CSV and\r
-pretty ASCII formats:\r
-\r
- - `csv format for 1t1c <../_static/vpp/performance-changes-pdr-1t1c-full.csv>`_,\r
- - `csv format for 2t2c <../_static/vpp/performance-changes-pdr-2t2c-full.csv>`_,\r
- - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-pdr-1t1c-full.txt>`_,\r
- - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-pdr-2t2c-full.txt>`_.\r
-\r
-Measured improvements are in line with VPP code optimizations listed in\r
-`VPP-18.01 release notes\r
-<https://docs.fd.io/vpp/18.01/release_notes_1801.html>`_.\r
-\r
-MRR Throughput Changes\r
-~~~~~~~~~~~~~~~~~~~~~~\r
-\r
-MRR changes between releases are available in a CSV and\r
-pretty ASCII formats:\r
-\r
- - `csv format for 1t1c <../_static/vpp/performance-changes-mrr-1t1c-full.csv>`_,\r
- - `csv format for 2t2c <../_static/vpp/performance-changes-mrr-2t2c-full.csv>`_,\r
- - `csv format for 4t4c <../_static/vpp/performance-changes-mrr-4t4c-full.csv>`_,\r
- - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-mrr-1t1c-full.txt>`_,\r
- - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-mrr-2t2c-full.txt>`_,\r
- - `pretty ASCII format for 4t4c <../_static/vpp/performance-changes-mrr-4t4c-full.txt>`_.\r
-\r
-Known Issues\r
-------------\r
-\r
-<to be updated before rls1804 release>\r
-\r
-Here is the list of known issues in CSIT |release| for VPP performance tests:\r
-\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| # | Issue | Jira ID | Description |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 1 | Vic1385 and Vic1227 low performance. | VPP-664 | Low NDR performance. |\r
-| | | | |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 2 | Sporadic (1 in 200) NDR discovery test failures | CSIT-570 | DPDK reporting rx-errors, indicating L1 issue. Suspected issue |\r
-| | on x520. | | with HW combination of X710-X520 in LF testbeds. Not observed |\r
-| | | | outside of LF testbeds. |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 3 | Lower than expected NDR throughput with | CSIT-571 | Suspected NIC firmware or DPDK driver issue affecting NDR and |\r
-| | xl710 and x710 NICs, compared to x520 NICs. | | PDR throughput. Applies to XL710 and X710 NICs. |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 4 | rls1801 plugin related performance regression | CSIT-925 | With all plugins loaded NDR, PDR and MaxRates vary |\r
-| | | | intermittently from 3% to 5% across multiple test executions. |\r
-| | | | Requires plugin code bisecting. |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 5 | rls1801 generic small performance regression | CSIT-926 | Generic performance regression of discovered NDR, PDR and |\r
-| | ip4base, l2xcbase, l2bdbase | | MaxRates of -3%..-1% vs. rls1710, affects ip4base, l2xcbase, |\r
-| | | | l2bdbase test suites. Not detected by CSIT performance trending |\r
-| | | | scheme as it was masked out by another issue CSIT-925. |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 6 | rls1801 substantial NDR/PDR regression for | CSIT-928 | NDR regression of -7%..-15%, PDR regression of -3%..-15% |\r
-| | IPSec tunnel scale with HW QAT crypto-dev | | compared to rls1710. |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
+CSIT Release Notes
+==================
+
+Changes in CSIT |release|
+-------------------------
+
+#. **VPP performance tests**
+
+ - *MRR tests* - New Maximum Receive Rate tests measure the packet
+ forwarding rate under the maximum load offered by traffic
+ generator over a set trial duration, regardless of packet loss.
+ MRR tests are used for continuous performance trending and for
+ comparison between releases.
+
+ - *Service Chaining with SRv6* - New SRv6 (Segment Routing IPv6) proxy
+ tests measure performance of SRv6 Endpoint fronting SR-unaware
+ appliance via masquerading (End.AM), dynamic proxy (End.AD) or
+ static proxy (End.AS) SR functions.
+
+#. **Presentation and Analytics Layer**
+
+ - *Performance trending* - Added continuous performance trending and
+ analysis. New Performance Trending and Performance Analysis jobs
+ executed regular throughput tests, with results being subsequently
+ analysed and trend and anomalies summarized and presented in VPP
+ Performance Dashboard and trendline graphs.
+
+#. **Test Framework Optimizations**
+
+ - *Performance tests efficiency* - Qemu build/install optimizations,
+ warmup phase handling, vpp restart handling. Resulted in improved
+ stability and reduced total execution time by 30% for single pkt
+ size e.g. 64B/78B.
+
+ - *General code housekeeping* - ongoing RF keywords optimizations,
+ removal of redundant RF keywords.
+
+Performance Changes
+-------------------
+
+Relative performance changes in measured packet throughput in CSIT
+|release| are calculated against the results from CSIT |release-1|
+report. Listed mean and standard deviation values are computed based on
+a series of the same tests executed against respective VPP releases to
+verify test results repeatibility, with percentage change calculated for
+mean values. Note that the standard deviation is quite high for a small
+number of packet throughput tests, what indicates poor test results
+repeatability and makes the relative change of mean throughput value not
+fully representative for these tests. The root causes behind poor
+results repeatibility vary between the test cases.
+
+NDR Changes
+~~~~~~~~~~~
+
+NDR small packet throughput changes between releases are available in a
+CSV and pretty ASCII formats:
+
+ - `csv format for 1t1c <../_static/vpp/performance-changes-ndr-1t1c-full.csv>`_,
+ - `csv format for 2t2c <../_static/vpp/performance-changes-ndr-2t2c-full.csv>`_,
+ - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-ndr-1t1c-full.txt>`_,
+ - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-ndr-2t2c-full.txt>`_.
+
+.. note::
+
+ Test results have been generated by
+ `FD.io test executor vpp performance jobs`_ with Robot Framework result
+ files csit-vpp-perf-|srelease|-\*.zip `archived here <../_static/archive/>`_.
+
+PDR Changes
+~~~~~~~~~~~
+
+NDR small packet throughput changes between releases are available in a
+CSV and pretty ASCII formats:
+
+ - `csv format for 1t1c <../_static/vpp/performance-changes-pdr-1t1c-full.csv>`_,
+ - `csv format for 2t2c <../_static/vpp/performance-changes-pdr-2t2c-full.csv>`_,
+ - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-pdr-1t1c-full.txt>`_,
+ - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-pdr-2t2c-full.txt>`_.
+
+.. note::
+
+ Test results have been generated by
+ `FD.io test executor vpp performance jobs`_ with Robot Framework result
+ files csit-vpp-perf-|srelease|-\*.zip `archived here <../_static/archive/>`_.
+
+MRR Changes
+~~~~~~~~~~~
+
+MRR small packet throughput changes between releases are available in a
+CSV and pretty ASCII formats:
+
+ - `csv format for 1t1c <../_static/vpp/performance-changes-mrr-1t1c-full.csv>`_,
+ - `csv format for 2t2c <../_static/vpp/performance-changes-mrr-2t2c-full.csv>`_,
+ - `csv format for 4t4c <../_static/vpp/performance-changes-mrr-4t4c-full.csv>`_,
+ - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-mrr-1t1c-full.txt>`_,
+ - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-mrr-2t2c-full.txt>`_,
+ - `pretty ASCII format for 4t4c <../_static/vpp/performance-changes-mrr-4t4c-full.txt>`_.
+
+.. note::
+
+ Test results have been generated by
+ `FD.io test executor vpp mrr jobs <https://jenkins.fd.io/view/csit/job/csit-vpp-perf-mrr-daily-master/>`_
+ with Robot Framework result files csit-vpp-perf-mrr-daily-master__*__output.xml.gz
+ `archived here <https://docs.fd.io/csit/master/trending/_static/archive/>`_.
+
+Throughput Trending
+-------------------
+
+In addition to reporting throughput changes between VPP releases, CSIT
+provides continuous performance trending for VPP master branch:
+
+#. `VPP Performance Dashboard <https://docs.fd.io/csit/master/trending/introduction/index.html>`_
+ - per VPP test case throughput trend, trend compliance and summary of
+ detected anomalies.
+
+#. `Trending Methodology <https://docs.fd.io/csit/master/trending/methodology/index.html>`_
+ - throughput test metrics, trend calculations and anomaly
+ classification (progression, regression, outlier).
+
+#. `Trendline Graphs <https://docs.fd.io/csit/master/trending/trending/index.html>`_
+ - per VPP build MRR throughput measurements against the trendline
+ with anomaly highlights, with associated CSIT test jobs.
+
+Known Issues
+------------
+
+List of known issues in CSIT |release| for VPP performance tests:
+
++---+-------------------------------------------------+------------+-----------------------------------------------------------------+
+| # | Issue | Jira ID | Description |
++===+=================================================+============+=================================================================+
+| 1 | Sporadic (1 in 200) NDR discovery test failures | CSIT-570 | DPDK reporting rx-errors, indicating L1 issue. Suspected issue |
+| | on x520. | | with HW combination of X710-X520 in LF testbeds. Not observed |
+| | | | outside of LF testbeds. |
++---+-------------------------------------------------+------------+-----------------------------------------------------------------+
+| 2 | Lower than expected NDR throughput of DPDK | CSIT-571 | Suspected NIC firmware or DPDK driver issue affecting NDR and |
+| | testpmd and VPP L2 path NDR throughput with | | PDR throughput on XL710 and X710 NICs. |
+| | xl710 and x710 NICs, compared to x520 NICs. | | |
++---+-------------------------------------------------+------------+-----------------------------------------------------------------+
+| 3 | Tagged Ethernet dot1q and dot1ad L2 path | CSIT-1066 | Tagged Ethernet dot1q and dot1ad L2 path throughput regression: |
+| | throughput regression. | | NDR -2%..-5%, PDR -2%..-6%, MRR. Affects l2xc and l2bd |
+| | | | performance tests. |
++---+-------------------------------------------------+------------+-----------------------------------------------------------------+
+| 4 | IPSec (software, no QAT HW) throughput | CSIT-1064 | IPSec throughput regression: NDR -3%..-8%, PDR -2%..-8%, MRR |
+| | regression. | | -3%..-7%. Affects IPSec SW tests, QAT HW tests not affected. |
++---+-------------------------------------------------+------------+-----------------------------------------------------------------+
+| 5 | High failure rate of creating working container | CSIT-1065 | About 20% of orchestrated container topology tests failing data |
+| | topologies with K8s/Ligato orchestration. | | plane verification indicating configuration issue. Suspected |
+| | | | issue with Ligato vpp-agent. |
++---+-------------------------------------------------+------------+-----------------------------------------------------------------+
Code Review / csit.git / blobdiff