rls1801 report: edits to static content for vpp and dpdk perf sections.
[csit.git] / docs / report / vpp_performance_tests / csit_release_notes.rst
index 6e3d631..17003bc 100644 (file)
@@ -6,32 +6,32 @@ Changes in CSIT |release|
 \r
 #. Added VPP performance tests\r
 \r
-   - **Container Topologies Orchestrated by K8s with VPP memif tests**\r
-\r
-   - Added tests with VPP in L2 Cross-Connect and Bridge-Domain\r
-     configurations containers, with service chain topologies orchestrated by\r
-     Kubernetes. Added following forwarding topologies: i) "Parallel" with\r
-     packets flowing from NIC via VPP to container and back to VPP and NIC;\r
-     ii) "Chained" a.k.a. "Snake" with packets flowing via VPP to container,\r
-     back to VPP, to next container, back to VPP and so on until the last\r
-     container in chain, then back to VPP and NIC; iii) "Horizontal" with\r
-     packets flowing via VPP to container, then via "horizontal" memif to\r
-     next container, and so on until the last container, then back to VPP and\r
-     NIC;.\r
+   - **Container Service Chain Topologies Orchestrated by K8s with VPP Memif**\r
+\r
+     - Added tests with VPP vswitch in container connecting a number of VPP-\r
+       in-container service chain topologies with L2 Cross-Connect and L2\r
+       Bridge-Domain configurations, orchestrated by Kubernetes. Added\r
+       following forwarding topologies: i) "Parallel" with packets flowing from\r
+       NIC via VPP to container and back to VPP and NIC; ii) "Chained" (a.k.a.\r
+       "Snake") with packets flowing via VPP to container, back to VPP, to next\r
+       container, back to VPP and so on until the last container in a chain,\r
+       then back to VPP and NIC; iii) "Horizontal" with packets flowing via VPP\r
+       to container, then via "horizontal" memif to next container, and so on\r
+       until the last container, then back to VPP and NIC;\r
 \r
    - **VPP TCP/IP stack**\r
 \r
      - Added tests for VPP TCP/IP stack using VPP built-in HTTP server.\r
        WRK traffic generator is used as a client-side;\r
 \r
-   - **SRv6 tests**\r
+   - **SRv6**\r
 \r
      - Initial SRv6 (Segment Routing IPv6) tests verifying performance of\r
        IPv6 and SRH (Segment Routing Header) encapsulation, decapsulation,\r
        lookups and rewrites based on configured End and End.DX6 SRv6 egress\r
        functions;\r
 \r
-   - **IPSecSW tests**\r
+   - **IPSecSW**\r
 \r
      - SW computed IPSec encryption with AES-GCM, CBC-SHA1 ciphers, in\r
        combination with IPv4 routed-forwarding;\r
@@ -42,7 +42,7 @@ Changes in CSIT |release|
        VPP tests into Presentation and Analytics Layer (PAL) for automated\r
        CSIT test results analysis;\r
 \r
-#. Other improvements\r
+#. Other changes\r
 \r
      - **Framework optimizations**\r
 \r
@@ -50,157 +50,56 @@ Changes in CSIT |release|
 \r
        - Overall stability improvements;\r
 \r
-Performance Improvements\r
-------------------------\r
+     - **NDR and PDR throughput binary search change**\r
 \r
-Substantial improvements in measured packet throughput have been observed in a\r
-number of CSIT |release| tests listed below, with relative increase of\r
-double-digit percentage points. Relative improvements for this release are\r
-calculated against the test results listed in CSIT |release-1| report. The\r
-comparison is calculated between the mean values based on collected and\r
-archived test results' samples for involved VPP releases. Standard deviation\r
-has been also listed for CSIT |release|. Performance numbers since release\r
-VPP-16.09 are provided for reference.\r
+       - Increased binary search resolution by reducing final step from\r
+         100kpps to 50kpps;\r
 \r
-NDR Throughput\r
-~~~~~~~~~~~~~~\r
+     - **VPP plugin loaded as needed by tests**\r
 \r
-Non-Drop Rate Throughput discovery tests:\r
+       - From this release only plugins required by tests are loaded at\r
+         VPP initialization time. Previously all plugins were loaded for\r
+         all tests;\r
 \r
-.. only:: html\r
+Performance Changes\r
+-------------------\r
 \r
-   .. csv-table::\r
-      :align: center\r
-      :file: performance_improvements/performance_improvements_ndr_top.csv\r
+Relative performance changes in measured packet throughput in CSIT\r
+|release| are calculated against the results from CSIT |release-1|\r
+report. Listed mean and standard deviation values are computed based on\r
+a series of the same tests executed against respective VPP releases to\r
+verify test results repeatibility, with percentage change calculated for\r
+mean values. Note that the standard deviation is quite high for a small\r
+number of packet throughput tests, what indicates poor test results\r
+repeatability and makes the relative change of mean throughput value not\r
+fully representative for these tests. The root causes behind poor\r
+results repeatibility vary between the test cases.\r
 \r
-.. only:: latex\r
+NDR Throughput Changes\r
+~~~~~~~~~~~~~~~~~~~~~~\r
 \r
-   .. raw:: latex\r
+NDR small packet throughput changes between releases are available in a CSV and\r
+pretty ASCII formats:\r
 \r
-      \makeatletter\r
-      \csvset{\r
-        perfimprovements column width/.style={after head=\csv@pretable\begin{longtable}{m{4cm} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1}}\csv@tablehead},\r
-      }\r
-      \makeatother\r
+  - `csv format for 1t1c <../_static/vpp/performance-changes-ndr-1t1c-full.csv>`_,\r
+  - `csv format for 2t2c <../_static/vpp/performance-changes-ndr-2t2c-full.csv>`_,\r
+  - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-ndr-1t1c-full.txt>`_,\r
+  - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-ndr-2t2c-full.txt>`_.\r
 \r
-      {\tiny\r
-      \csvautobooklongtable[separator=comma,\r
-        respect all,\r
-        no check column count,\r
-        perfimprovements column width=1cm,\r
-        late after line={\\\hline},\r
-        late after last line={\end{longtable}}\r
-        ]{../_tmp/src/vpp_performance_tests/performance_improvements/performance_improvements_ndr_top.csv}\r
-      }\r
+PDR Throughput Changes\r
+~~~~~~~~~~~~~~~~~~~~~~\r
 \r
+NDR small packet throughput changes between releases are available in a CSV and\r
+pretty ASCII formats:\r
 \r
-PDR Throughput\r
-~~~~~~~~~~~~~~\r
-\r
-Partial Drop Rate thoughput discovery tests with packet Loss Tolerance of 0.5%:\r
-\r
-.. only:: html\r
-\r
-   .. csv-table::\r
-      :align: center\r
-      :file: performance_improvements/performance_improvements_pdr_top.csv\r
-\r
-.. only:: latex\r
-\r
-   .. raw:: latex\r
-\r
-      \makeatletter\r
-      \csvset{\r
-        perfimprovements column width/.style={after head=\csv@pretable\begin{longtable}{m{4cm} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1}}\csv@tablehead},\r
-      }\r
-      \makeatother\r
-\r
-      {\tiny\r
-      \csvautobooklongtable[separator=comma,\r
-        respect all,\r
-        no check column count,\r
-        perfimprovements column width=1cm,\r
-        late after line={\\\hline},\r
-        late after last line={\end{longtable}}\r
-        ]{../_tmp/src/vpp_performance_tests/performance_improvements/performance_improvements_pdr_top.csv}\r
-      }\r
-\r
+  - `csv format for 1t1c <../_static/vpp/performance-changes-pdr-1t1c-full.csv>`_,\r
+  - `csv format for 2t2c <../_static/vpp/performance-changes-pdr-2t2c-full.csv>`_,\r
+  - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-pdr-1t1c-full.txt>`_,\r
+  - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-pdr-2t2c-full.txt>`_.\r
 \r
 Measured improvements are in line with VPP code optimizations listed in\r
-`VPP-17.10 release notes\r
-<https://docs.fd.io/vpp/17.10/release_notes_1710.html>`_.\r
-\r
-Other Performance Changes\r
--------------------------\r
-\r
-Other changes in measured packet throughput, with either minor relative increase\r
-or decrease, have been observed in a number of CSIT |release| tests listed\r
-below. Relative changes are calculated against the test results listed in CSIT\r
-|release-1| report.\r
-\r
-NDR Throughput\r
-~~~~~~~~~~~~~~\r
-\r
-Non-Drop Rate Throughput discovery tests:\r
-\r
-.. only:: html\r
-\r
-   .. csv-table::\r
-      :align: center\r
-      :file: performance_improvements/performance_improvements_ndr_low.csv\r
-\r
-.. only:: latex\r
-\r
-   .. raw:: latex\r
-\r
-      \makeatletter\r
-      \csvset{\r
-        perfimprovements column width/.style={after head=\csv@pretable\begin{longtable}{m{4cm} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1}}\csv@tablehead},\r
-      }\r
-      \makeatother\r
-\r
-      {\tiny\r
-      \csvautobooklongtable[separator=comma,\r
-        respect all,\r
-        no check column count,\r
-        perfimprovements column width=1cm,\r
-        late after line={\\\hline},\r
-        late after last line={\end{longtable}}\r
-        ]{../_tmp/src/vpp_performance_tests/performance_improvements/performance_improvements_ndr_low.csv}\r
-      }\r
-\r
-\r
-PDR Throughput\r
-~~~~~~~~~~~~~~\r
-\r
-Partial Drop Rate thoughput discovery tests with packet Loss Tolerance of 0.5%:\r
-\r
-.. only:: html\r
-\r
-   .. csv-table::\r
-      :align: center\r
-      :file: performance_improvements/performance_improvements_pdr_low.csv\r
-\r
-.. only:: latex\r
-\r
-   .. raw:: latex\r
-\r
-      \makeatletter\r
-      \csvset{\r
-        perfimprovements column width/.style={after head=\csv@pretable\begin{longtable}{m{4cm} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1}}\csv@tablehead},\r
-      }\r
-      \makeatother\r
-\r
-      {\tiny\r
-      \csvautobooklongtable[separator=comma,\r
-        respect all,\r
-        no check column count,\r
-        perfimprovements column width=1cm,\r
-        late after line={\\\hline},\r
-        late after last line={\end{longtable}}\r
-        ]{../_tmp/src/vpp_performance_tests/performance_improvements/performance_improvements_pdr_low.csv}\r
-      }\r
-\r
+`VPP-18.01 release notes\r
+<https://docs.fd.io/vpp/18.01/release_notes_1801.html>`_.\r
 \r
 Known Issues\r
 ------------\r
@@ -213,13 +112,14 @@ Here is the list of known issues in CSIT |release| for VPP performance tests:
 | 1 | Vic1385 and Vic1227 low performance.            | VPP-664    | Low NDR performance.                                            |\r
 |   |                                                 |            |                                                                 |\r
 +---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 2 | Sporadic NDR discovery test failures on x520.   | CSIT-750   | Suspected issue with HW combination of X710-X520 in LF          |\r
-|   |                                                 |            | infrastructure. Issue can't be replicated outside LF.           |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 3 | VPP in 2t2c setups - large variation            | CSIT-568   | Suspected NIC firmware or DPDK driver issue affecting NDR       |\r
-|   | of discovered NDR throughput values across      |            | throughput. Applies to XL710 and X710 NICs, x520 NICs are fine. |\r
-|   | multiple test runs with xl710 and x710 NICs.    |            |                                                                 |\r
+| 2 | Sporadic (1 in 200) NDR discovery test failures | CSIT-570   | DPDK reporting rx-errors, indicating L1 issue. Suspected issue  |\r
+|   | on x520.                                        |            | with HW combination of X710-X520 in LF testbeds. Not observed   |\r
+|   |                                                 |            | outside of LF testbeds.                                         |\r
 +---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 4 | Lower than expected NDR throughput with         | CSIT-569   | Suspected NIC firmware or DPDK driver issue affecting NDR and   |\r
+| 3 | Lower than expected NDR throughput with         | CSIT-571   | Suspected NIC firmware or DPDK driver issue affecting NDR and   |\r
 |   | xl710 and x710 NICs, compared to x520 NICs.     |            | PDR throughput. Applies to XL710 and X710 NICs.                 |\r
 +---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
+| 4 | QAT IPSec scale with 1000 tunnels (interfaces)  | VPP-1121   | VPP crashes during configuration of 1000 IPsec tunnels.         |\r
+|   | in 2t2c config, all tests are failing.          |            | 1t1c tests are not affected                                     |\r
++---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
+\r