CSIT-1397: Create Heatmap graphs
[csit.git] / docs / report / vpp_performance_tests / csit_release_notes.rst
index 3ce11bd..5d87b85 100644 (file)
-CSIT Release Notes\r
-==================\r
-\r
-Changes in CSIT |release|\r
--------------------------\r
-\r
-#. **Added VPP performance tests**\r
-\r
-   - **MRR tests** : New MRR tests measure the packet forwarding rate\r
-       under the maximum load offered by traffic generator over a set\r
-       trial duration, regardless of packet loss. Maximum load for\r
-       specified Ethernet frame size is set to the bi-directional link\r
-       rate. MRR tests are used for continuous performance trending and\r
-       for comparison between releases.\r
-\r
-   - **Service Chaining with SRv6** : SRv6 (Segment Routing IPv6) proxy tests\r
-       verifying performance of Endpoint to SR-unaware appliance via\r
-       masquerading (End.AM), dynamic proxy (End.AD) or static proxy (End.AS)\r
-       functions.\r
-\r
-#. **Presentation and Analytics Layer (PAL)**\r
-\r
-     - Added continuous performance measuring, trending and anomaly\r
-       detection. Includes new PAL code and Jenkins jobs for Performance\r
-       Trending (PT) and Performance Analysis (PA) producing performance\r
-       trending dashboard and trendline graphs with summary and drill-\r
-       down views across all specified tests that can be reviewed and\r
-       inspected regularly by FD.io developers and users community.\r
-\r
-#. **Test Framework Optimizations**\r
-\r
-     - **Performance tests efficiency** : Qemu build/install\r
-     optimizations, warmup phase handling, vpp restart handling.\r
-     Resulted in improved stability and reduced total execution time by\r
-     30% for single pkt size e.g. 64B/78B.\r
-\r
-     - **General code housekeeping** : ongoing RF keywords\r
-     optimizations, removal of redundant RF keywords.\r
-\r
-Performance Changes\r
--------------------\r
-\r
-Relative performance changes in measured packet throughput in CSIT\r
-|release| are calculated against the results from CSIT |release-1|\r
-report. Listed mean and standard deviation values are computed based on\r
-a series of the same tests executed against respective VPP releases to\r
-verify test results repeatibility, with percentage change calculated for\r
-mean values. Note that the standard deviation is quite high for a small\r
-number of packet throughput tests, what indicates poor test results\r
-repeatability and makes the relative change of mean throughput value not\r
-fully representative for these tests. The root causes behind poor\r
-results repeatibility vary between the test cases.\r
-\r
-NDR Throughput Changes\r
-~~~~~~~~~~~~~~~~~~~~~~\r
-\r
-NDR small packet throughput changes between releases are available in a CSV and\r
-pretty ASCII formats:\r
-\r
-  - `csv format for 1t1c <../_static/vpp/performance-changes-ndr-1t1c-full.csv>`_,\r
-  - `csv format for 2t2c <../_static/vpp/performance-changes-ndr-2t2c-full.csv>`_,\r
-  - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-ndr-1t1c-full.txt>`_,\r
-  - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-ndr-2t2c-full.txt>`_.\r
-\r
-PDR Throughput Changes\r
-~~~~~~~~~~~~~~~~~~~~~~\r
-\r
-NDR small packet throughput changes between releases are available in a CSV and\r
-pretty ASCII formats:\r
-\r
-  - `csv format for 1t1c <../_static/vpp/performance-changes-pdr-1t1c-full.csv>`_,\r
-  - `csv format for 2t2c <../_static/vpp/performance-changes-pdr-2t2c-full.csv>`_,\r
-  - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-pdr-1t1c-full.txt>`_,\r
-  - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-pdr-2t2c-full.txt>`_.\r
-\r
-MRR Throughput Changes\r
-~~~~~~~~~~~~~~~~~~~~~~\r
-\r
-MRR changes between releases are available in a CSV and\r
-pretty ASCII formats:\r
-\r
-  - `csv format for 1t1c <../_static/vpp/performance-changes-mrr-1t1c-full.csv>`_,\r
-  - `csv format for 2t2c <../_static/vpp/performance-changes-mrr-2t2c-full.csv>`_,\r
-  - `csv format for 4t4c <../_static/vpp/performance-changes-mrr-4t4c-full.csv>`_,\r
-  - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-mrr-1t1c-full.txt>`_,\r
-  - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-mrr-2t2c-full.txt>`_,\r
-  - `pretty ASCII format for 4t4c <../_static/vpp/performance-changes-mrr-4t4c-full.txt>`_.\r
-\r
-Known Issues\r
-------------\r
-\r
-Here is the list of known issues in CSIT |release| for VPP performance tests:\r
-\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| # | Issue                                           | Jira ID    | Description                                                     |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 1 | Sporadic (1 in 200) NDR discovery test failures | CSIT-570   | DPDK reporting rx-errors, indicating L1 issue. Suspected issue  |\r
-|   | on x520.                                        |            | with HW combination of X710-X520 in LF testbeds. Not observed   |\r
-|   |                                                 |            | outside of LF testbeds.                                         |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 2 | Lower than expected NDR throughput of DPDK      | CSIT-571   | Suspected NIC firmware or DPDK driver issue affecting NDR and   |\r
-|   | testpmd and VPP L2 path NDR throughput with     |            | PDR throughput on XL710 and X710 NICs.                          |\r
-|   | xl710 and x710 NICs, compared to x520 NICs.     |            |                                                                 |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 3 | Tagged Ethernet dot1q and dot1ad L2 path        | CSIT-1066  | Tagged Ethernet dot1q and dot1ad L2 path throughput regression: |\r
-|   | throughput regression.                          |            | NDR -2%..-5%, PDR -2%..-6%, MRR. Affects l2xc and l2bd          |\r
-|   |                                                 |            | performance tests.                                              |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 4 | IPSec (software, no QAT HW) throughput          | CSIT-1064  | IPSec throughput regression: NDR -3%..-8%, PDR -2%..-8%, MRR    |\r
-|   | regression.                                     |            | -3%..-7%.                                                       |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 5 | High failure rate of creating working container | CSIT-1065  | Orchestrated container topology tests failing data plane        |\r
-|   | topologies with K8s/Ligato orchestration.       |            | verification indicating configuration issue. Suspected issue    |\r
-|   |                                                 |            | with Ligato vpp-agent.                                          |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
+Release Notes
+=============
+
+Changes in |csit-release|
+-------------------------
+
+#. VPP PERFORMANCE TESTS
+
+   - **BMRR Throughput**: MRR (Maximum Receive Rate) test code has been
+     updated with a configurable burst MRR parameters: trial duration
+     and number of trials in a single burst. Enables a new Burst MRR
+     (BMRR for short) methodology for more precise performance
+     trending. See updated :ref:`test_methodology` section
+     for more details.
+
+   - **2n-skx tests**: Added performamce tests for 2n-skx (2-Node Xeon
+     Skylake) testbeds: focus on baseline and scale tests, including
+     VM vhost and Container memif tests.
+
+   - **3n-skx tests**: Added performamce tests for 3n-skx (3-Node Xeon
+     Skylake) testbeds: VM vhost and Container memif tests.
+
+   - **VXLAN Scale Tests**: Added performamce tests for VXLAN scale with
+     dot1q and VPP L2BD.
+
+   - **AVF Driver Tests**: Added performamce tests for i40e AVF driver
+     on VPP, no DPDK required.
+
+   - **QAT**: Fixed reoccuring issues with QAT crypto accelerator cards.
+
+   - **VM Vhost Virtio Params Combinations**: Added performance tests
+     for VM vhost with different virtio parameters combinations:
+     indirect buffers, mergeable buffers.
+
+   - **K8s/Ligato in Trending**: Added K8s/Ligato Container memif tests
+     to daily trending.
+
+#. TEST FRAMEWORK
+
+   - **Experimental Soak Tests**: Added performamce soak tests framework
+     code for extended time duration tests and throughput discovery
+     at given PLR and at give total test time e.g. minutes, hours,
+     days, weeks, months, years. See updated
+     :ref:`test_methodology` section for more details.
+
+   - **Trending Tests BMRR**: Used new Burst MRR (BMRR) tests for daily
+     trending.
+
+   - **Per VPP Patch Performance Checks**: Per VPP gerrit patch vs.
+     parent performance tests, anomaly detection and no verify voting
+     (-1/0/+1) yet. Manual trigger only. Not "marketed" to FD.io
+     community yet to avoid excessive LFN FD.io physical performance
+     testbed blocking.
+
+   - **Patch-on-Patch Infra**: Added capability to run performance tests
+     using CSIT gerrit patch code testing VPP gerrit patch code, i.e.
+     before any VPP and/or CSIT code is merged into git branch.
+
+   - **CSIT PAPI Support**: Initial implementation of PAPI L1 KWs in
+     CSIT using VPP Python bindings. Required for migraing away from
+     VAT. Very few L1 KWs implemented ("show version", "show
+     interfaces").
+
+   - **General Code Housekeeping**: Ongoing RF keywords optimizations,
+     removal of redundant RF keywords.
+
+#. PRESENTATION AND ANALYTICS LAYER
+
+   - **Graphs Layout Improvements**: Improved performance graphs layout
+     for better readibility and maintenance: test grouping, axis
+     labels, descriptions, other informative decoration. Master report
+     generated. 744 graphs(!)
+
+   - **Performance Trending**: Further improvements of continuous
+     performance trending, anomaly detection and analysis.
+
+#. MISCELLANEOUS
+
+   - **3n-dnv Tests (3rd Party)**: Published performance tests for 3n-
+     dnv (3-Node Atom Denverton) from 3rd party testbeds running FD.io
+     |csit-release| automated testing code.
+     Only graphs for Packet Throughput and Speedup Multi-core and not
+     for Packet Latency were published as there are no results for Packet
+     Latency available.
+
+.. raw:: latex
+
+    \clearpage
+
+.. _vpp_known_issues:
+
+Known Issues
+------------
+
+List of known issues in |csit-release| for VPP performance tests:
+
++----+-----------------------------------------+---------------------------------------------------------------------------------------------------------------------------------+
+| #  | JiraID                                  | Issue Description                                                                                                               |
++====+=========================================+=================================================================================================================================+
+| 1  | `CSIT-570                               | Sporadic (1 in 200) NDR discovery test failures on x520. DPDK reporting rx-errors, indicating L1 issue.                         |
+|    | <https://jira.fd.io/browse/CSIT-570>`_  | Suspected issue with HW combination of X710-X520 in LF testbeds. Not observed outside of LF testbeds.                           |
++----+-----------------------------------------+---------------------------------------------------------------------------------------------------------------------------------+
+| 2  | `CSIT-1234                              | VPP IPSecHW scale interface mode 1core, low NDR and PDR 64B throughput in 3n-hsw testbeds, in CSIT-18.07 vs. CSIT-18.04.        |
+|    | <https://jira.fd.io/browse/CSIT-1234>`_ | ip4ipsecscale1000tnl-ip4base-int 1core CSIT-18.07/18.04 relative change: NDR -31%, PDR -32%, MRR -38%.                          |
++----+-----------------------------------------+---------------------------------------------------------------------------------------------------------------------------------+
+| 3  | `CSIT-1242                              | VPP xl710 ip4base test 1core, low NDR and PDR 64B throughput in 3n-hsw testbeds, in CSIT-18.07 vs. CSIT-18.04.                  |
+|    | <https://jira.fd.io/browse/CSIT-1242>`_ | xl710 ip4base 1core CSIT-18.07/18.04 relative change: NDR -29%, high stdev.                                                     |
++----+-----------------------------------------+---------------------------------------------------------------------------------------------------------------------------------+
+| 4  | `CSIT-1243                              | VPP nat44 base test 2core, low NDR and PDR 64B throughput in 3n-skx testbeds, compared to 3n-hsw testbeds.                      |
+|    | <https://jira.fd.io/browse/CSIT-1243>`_ | ip4base-nat44 2core 3n-skx/3n-hsw relative change: NDR -19%, PDR -22%.                                                          |
++----+-----------------------------------------+---------------------------------------------------------------------------------------------------------------------------------+
+| 5  | `CSIT-1246                              | Ligato K8S orchestrated tests are failing due to incompatibility of the latest released Ligato vpp-agent with VPP-18.07.        |
+|    | <https://jira.fd.io/browse/CSIT-1246>`_ | Past vpp-agent releases are not compatible either.                                                                              |
++----+-----------------------------------------+---------------------------------------------------------------------------------------------------------------------------------+
+