-CSIT Release Notes\r
-==================\r
-\r
-Changes in CSIT |release|\r
--------------------------\r
-\r
-#. **Added VPP performance tests**\r
-\r
- - **MRR tests** : New MRR tests measure the packet forwarding rate\r
- under the maximum load offered by traffic generator over a set\r
- trial duration, regardless of packet loss. Maximum load for\r
- specified Ethernet frame size is set to the bi-directional link\r
- rate. MRR tests are used for continuous performance trending and\r
- for comparison between releases.\r
-\r
- - **Service Chaining with SRv6** : SRv6 (Segment Routing IPv6) proxy tests\r
- verifying performance of Endpoint to SR-unaware appliance via\r
- masquerading (End.AM), dynamic proxy (End.AD) or static proxy (End.AS)\r
- functions.\r
-\r
-#. **Presentation and Analytics Layer (PAL)**\r
-\r
- - Added continuous performance measuring, trending and anomaly\r
- detection. Includes new PAL code and Jenkins jobs for Performance\r
- Trending (PT) and Performance Analysis (PA) producing performance\r
- trending dashboard and trendline graphs with summary and drill-\r
- down views across all specified tests that can be reviewed and\r
- inspected regularly by FD.io developers and users community.\r
-\r
-#. **Test Framework Optimizations**\r
-\r
- - **Performance tests efficiency** : Qemu build/install\r
- optimizations, warmup phase handling, vpp restart handling.\r
- Resulted in improved stability and reduced total execution time by\r
- 30% for single pkt size e.g. 64B/78B.\r
-\r
- - **General code housekeeping** : ongoing RF keywords\r
- optimizations, removal of redundant RF keywords.\r
-\r
-Performance Changes\r
--------------------\r
-\r
-Relative performance changes in measured packet throughput in CSIT\r
-|release| are calculated against the results from CSIT |release-1|\r
-report. Listed mean and standard deviation values are computed based on\r
-a series of the same tests executed against respective VPP releases to\r
-verify test results repeatibility, with percentage change calculated for\r
-mean values. Note that the standard deviation is quite high for a small\r
-number of packet throughput tests, what indicates poor test results\r
-repeatability and makes the relative change of mean throughput value not\r
-fully representative for these tests. The root causes behind poor\r
-results repeatibility vary between the test cases.\r
-\r
-NDR Throughput Changes\r
-~~~~~~~~~~~~~~~~~~~~~~\r
-\r
-NDR small packet throughput changes between releases are available in a CSV and\r
-pretty ASCII formats:\r
-\r
- - `csv format for 1t1c <../_static/vpp/performance-changes-ndr-1t1c-full.csv>`_,\r
- - `csv format for 2t2c <../_static/vpp/performance-changes-ndr-2t2c-full.csv>`_,\r
- - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-ndr-1t1c-full.txt>`_,\r
- - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-ndr-2t2c-full.txt>`_.\r
-\r
-PDR Throughput Changes\r
-~~~~~~~~~~~~~~~~~~~~~~\r
-\r
-NDR small packet throughput changes between releases are available in a CSV and\r
-pretty ASCII formats:\r
-\r
- - `csv format for 1t1c <../_static/vpp/performance-changes-pdr-1t1c-full.csv>`_,\r
- - `csv format for 2t2c <../_static/vpp/performance-changes-pdr-2t2c-full.csv>`_,\r
- - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-pdr-1t1c-full.txt>`_,\r
- - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-pdr-2t2c-full.txt>`_.\r
-\r
-MRR Throughput Changes\r
-~~~~~~~~~~~~~~~~~~~~~~\r
-\r
-MRR changes between releases are available in a CSV and\r
-pretty ASCII formats:\r
-\r
- - `csv format for 1t1c <../_static/vpp/performance-changes-mrr-1t1c-full.csv>`_,\r
- - `csv format for 2t2c <../_static/vpp/performance-changes-mrr-2t2c-full.csv>`_,\r
- - `csv format for 4t4c <../_static/vpp/performance-changes-mrr-4t4c-full.csv>`_,\r
- - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-mrr-1t1c-full.txt>`_,\r
- - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-mrr-2t2c-full.txt>`_,\r
- - `pretty ASCII format for 4t4c <../_static/vpp/performance-changes-mrr-4t4c-full.txt>`_.\r
-\r
-Known Issues\r
-------------\r
-\r
-<to be updated before rls1804 release>\r
-\r
-Here is the list of known issues in CSIT |release| for VPP performance tests:\r
-\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| # | Issue | Jira ID | Description |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 1 | Vic1385 and Vic1227 low performance. | VPP-664 | Low NDR performance. |\r
-| | | | |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 2 | Sporadic (1 in 200) NDR discovery test failures | CSIT-570 | DPDK reporting rx-errors, indicating L1 issue. Suspected issue |\r
-| | on x520. | | with HW combination of X710-X520 in LF testbeds. Not observed |\r
-| | | | outside of LF testbeds. |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 3 | Lower than expected NDR throughput with | CSIT-571 | Suspected NIC firmware or DPDK driver issue affecting NDR and |\r
-| | xl710 and x710 NICs, compared to x520 NICs. | | PDR throughput. Applies to XL710 and X710 NICs. |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 4 | rls1801 plugin related performance regression | CSIT-925 | With all plugins loaded NDR, PDR and MaxRates vary |\r
-| | | | intermittently from 3% to 5% across multiple test executions. |\r
-| | | | Requires plugin code bisecting. |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 5 | rls1801 generic small performance regression | CSIT-926 | Generic performance regression of discovered NDR, PDR and |\r
-| | ip4base, l2xcbase, l2bdbase | | MaxRates of -3%..-1% vs. rls1710, affects ip4base, l2xcbase, |\r
-| | | | l2bdbase test suites. Not detected by CSIT performance trending |\r
-| | | | scheme as it was masked out by another issue CSIT-925. |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 6 | rls1801 substantial NDR/PDR regression for | CSIT-928 | NDR regression of -7%..-15%, PDR regression of -3%..-15% |\r
-| | IPSec tunnel scale with HW QAT crypto-dev | | compared to rls1710. |\r
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
+Release Notes
+=============
+
+Changes in |csit-release|
+-------------------------
+
+#. VPP PERFORMANCE TESTS
+
+ - **Service density 2n-skx tests**: Added higher NF density tests with
+ IPSec encencryption between DUTs.
+
+ - **AVF tests**: Full test coveraged based on code changes in CSIT core
+ layer (driver/interface awareness) and generated by suite generator
+ (Fortville NICs only).
+
+ - **Hoststack TCP/IP tests**: Major refactor of Hoststack TCP
+ performance tests using WRK generator talking to the VPP HTTP
+ static server plugin measuring connections per second and
+ requests per second.
+
+#. TEST FRAMEWORK
+
+ - **CSIT Python3 Support**: Full migration of CSIT from Python2.7 to
+ Python3.6. This change includes library migration, PIP dependency upgrade,
+ CSIT container images, infrastructure packages ugrade/installation.
+
+ - **CSIT PAPI Support**: Finished conversion of CSIT VAT L1 keywords
+ to PAPI L1 KWs in CSIT using VPP Python bindings (VPP PAPI).
+ Redesign of key components of PAPI Socket Executor and PAPI
+ history. Due to issues with PAPI performance, VAT is still used
+ in CSIT for all VPP scale tests. See known issues below.
+
+ - **General Code Housekeeping**: Ongoing RF keywords optimizations,
+ removal of redundant RF keywords and aligning of suite/test
+ setup/teardowns.
+
+
+#. PRESENTATION AND ANALYTICS LAYER
+
+ - **Graphs Layout Improvements**: Improved performance graphs layout
+ for better readibility and maintenance: test grouping, axis
+ labels, descriptions, other informative decoration.
+
+.. raw:: latex
+
+ \clearpage
+
+.. _vpp_known_issues:
+
+Known Issues
+------------
+
+List of known issues in |csit-release| for VPP performance tests:
+
++----+-----------------------------------------+----------------------------------------------------------------------------------------------------------+
+| # | JiraID | Issue Description |
++====+=========================================+==========================================================================================================+
+| 1 | `CSIT-570 | Sporadic (1 in 200) NDR discovery test failures on x520. DPDK reporting rx-errors, indicating L1 issue. |
+| | <https://jira.fd.io/browse/CSIT-570>`_ | Suspected issue with HW combination of X710-X520 in LF testbeds. Not observed outside of LF testbeds. |
++----+-----------------------------------------+----------------------------------------------------------------------------------------------------------+
+| 2 | `VPP-662 | 9000B packets not supported by NICs VIC1227 and VIC1387. |
+| | <https://jira.fd.io/browse/VPP-662>`_ | |
++----+-----------------------------------------+----------------------------------------------------------------------------------------------------------+
+| 3 | `CSIT-1498 | Memif tests are sporadically failing on initialization of memif connection. |
+| | <https://jira.fd.io/browse/CSIT-1498>`_ | |
++----+-----------------------------------------+----------------------------------------------------------------------------------------------------------+
+| 4 | `VPP-1677 | 9000B ip4 nat44: VPP crash + coredump. |
+| | <https://jira.fd.io/browse/VPP-1677>`_ | VPP crashes very often in case that NAT44 is configured and it has to process IP4 jumbo frames (9000B). |
++----+-----------------------------------------+----------------------------------------------------------------------------------------------------------+
+| 5 | `CSIT-1591 | All CSIT scale tests can not use PAPI due to much slower performance compared to VAT/CLI (it takes much |
+| | <https://jira.fd.io/browse/CSIT-1499>`_ | longer to program VPP). This needs to be addressed on the PAPI side. |
+| +-----------------------------------------+ |
+| | `VPP-1763 | |
+| | <https://jira.fd.io/browse/VPP-1763>`_ | |
++----+-----------------------------------------+----------------------------------------------------------------------------------------------------------+
+| 6 | `VPP-1675 | IPv4 IPSEC 9000B packet tests are failing as no packet is forwarded. |
+| | <https://jira.fd.io/browse/VPP-1675>`_ | Reason: chained buffers are not supported. |
++----+-----------------------------------------+----------------------------------------------------------------------------------------------------------+
+| 7 | `CSIT-1593 | IPv4 AVF 9000B packet tests are failing on 3n-skx while passing on 2n-skx. |
+| | <https://jira.fd.io/browse/CSIT-1593>`_ | |
++----+-----------------------------------------+----------------------------------------------------------------------------------------------------------+
+
Code Review / csit.git / blobdiff