1807 report: updated virtual topologies for all functional tests.

[csit.git] / docs / report / vpp_performance_tests / overview.rst

diff --git a/docs/report/vpp_performance_tests/overview.rst b/docs/report/vpp_performance_tests/overview.rst
index 73441d1..8ddcaec 100644 (file)
--- a/docs/report/vpp_performance_tests/overview.rst
+++ b/docs/report/vpp_performance_tests/overview.rst
@@ -30,9 +30,10 @@ testbeds are shown in figures below.
     .. raw:: latex
 
         \begin{figure}[H]
-        \centering
-            \includesvg[width=0.90\textwidth]{../_tmp/src/vpp_performance_tests/logical-2n-nic2nic}
-            \label{fig:logical-2n-nic2nic}
+            \centering
+                \graphicspath{{../_tmp/src/vpp_performance_tests/}}
+                \includegraphics[width=0.90\textwidth]{logical-2n-nic2nic}
+                \label{fig:logical-2n-nic2nic}
         \end{figure}
 
 .. only:: html
@@ -47,9 +48,10 @@ testbeds are shown in figures below.
     .. raw:: latex
 
         \begin{figure}[H]
-        \centering
-            \includesvg[width=0.90\textwidth]{../_tmp/src/vpp_performance_tests/logical-3n-nic2nic}
-            \label{fig:logical-3n-nic2nic}
+            \centering
+                \graphicspath{{../_tmp/src/vpp_performance_tests/}}
+                \includegraphics[width=0.90\textwidth]{logical-3n-nic2nic}
+                \label{fig:logical-3n-nic2nic}
         \end{figure}
 
 .. only:: html
@@ -87,7 +89,7 @@ VM Service Switching
 VM service switching topology test cases require VPP DUT to communicate
 with Virtual Machines (VMs) over vhost-user virtual interfaces.
 
-Two types of VM service topologies are tested in CSIT |release|:
+Two types of VM service topologies are tested in |csit-release|:
 
 #. "Parallel" topology with packets flowing within SUT from NIC(s) via
    VPP DUT to VM, back to VPP DUT, then out thru NIC(s).
@@ -107,9 +109,10 @@ SUT running N of VM instances is shown in the figures below.
     .. raw:: latex
 
         \begin{figure}[H]
-        \centering
-            \includesvg[width=0.90\textwidth]{../_tmp/src/vpp_performance_tests/logical-2n-vm-vhost}
-            \label{fig:logical-2n-vm-vhost}
+            \centering
+                \graphicspath{{../_tmp/src/vpp_performance_tests/}}
+                \includegraphics[width=0.90\textwidth]{logical-2n-vm-vhost}
+                \label{fig:logical-2n-vm-vhost}
         \end{figure}
 
 .. only:: html
@@ -124,9 +127,10 @@ SUT running N of VM instances is shown in the figures below.
     .. raw:: latex
 
         \begin{figure}[H]
-        \centering
-            \includesvg[width=0.90\textwidth]{../_tmp/src/vpp_performance_tests/logical-3n-vm-vhost}
-            \label{fig:logical-3n-vm-vhost}
+            \centering
+                \graphicspath{{../_tmp/src/vpp_performance_tests/}}
+                \includegraphics[width=0.90\textwidth]{logical-3n-vm-vhost}
+                \label{fig:logical-3n-vm-vhost}
         \end{figure}
 
 .. only:: html
@@ -161,7 +165,7 @@ Container Service Switching
 Container service switching topology test cases require VPP DUT to
 communicate with Containers (Ctrs) over memif virtual interfaces.
 
-Three types of VM service topologies are tested in CSIT |release|:
+Three types of VM service topologies are tested in |csit-release|:
 
 #. "Parallel" topology with packets flowing within SUT from NIC(s) via
    VPP DUT to Container, back to VPP DUT, then out thru NIC(s).
@@ -187,9 +191,10 @@ below.
     .. raw:: latex
 
         \begin{figure}[H]
-        \centering
-            \includesvg[width=0.90\textwidth]{../_tmp/src/vpp_performance_tests/logical-2n-container-memif}
-            \label{fig:logical-2n-container-memif}
+            \centering
+                \graphicspath{{../_tmp/src/vpp_performance_tests/}}
+                \includegraphics[width=0.90\textwidth]{logical-2n-container-memif}
+                \label{fig:logical-2n-container-memif}
         \end{figure}
 
 .. only:: html
@@ -204,9 +209,10 @@ below.
     .. raw:: latex
 
         \begin{figure}[H]
-        \centering
-            \includesvg[width=0.90\textwidth]{../_tmp/src/vpp_performance_tests/logical-3n-container-memif}
-            \label{fig:logical-3n-container-memif}
+            \centering
+                \graphicspath{{../_tmp/src/vpp_performance_tests/}}
+                \includegraphics[width=0.90\textwidth]{logical-3n-container-memif}
+                \label{fig:logical-3n-container-memif}
         \end{figure}
 
 .. only:: html
@@ -259,11 +265,11 @@ topologies and configurations:
   regardless of packet loss. Maximum load for specified Ethernet frame
   size is set to the bi-directional link rate.
 
-CSIT |release| includes following performance test areas covered across
-a range of NIC drivers and NIC models:
+|csit-release| includes following VPP data plane functionality
+performance tested across a range of NIC drivers and NIC models:
 
 +-----------------------+----------------------------------------------+
-| Test Area             |  Description                                 |
+| Functionality         |  Description                                 |
 +=======================+==============================================+
 | ACL                   | L2 Bridge-Domain switching and               |
 |                       | IPv4and IPv6 routing with iACL and oACL IP   |
@@ -337,6 +343,10 @@ a range of NIC drivers and NIC models:
 | VPP TCP/IP stack      | Tests of VPP TCP/IP stack used with VPP      |
 |                       | built-in HTTP server.                        |
 +-----------------------+----------------------------------------------+
+| VTS                   | Virtual Topology System use case tests       |
+|                       | combining VXLAN overlay tunneling with L2BD, |
+|                       | ACL and KVM VM vhost-user features.          |
++-----------------------+----------------------------------------------+
 | VXLAN                 | VXLAN overlay tunnelling integration with    |
 |                       | L2XC and L2BD.                               |
 +-----------------------+----------------------------------------------+
@@ -349,8 +359,8 @@ NIC models has been limited to few baseline tests.
 Performance Tests Naming
 ------------------------
 
-FD.io CSIT |release| follows a common structured naming convention for
-all performance and system functional tests, introduced in CSIT rls1701.
+FD.io |csit-release| follows a common structured naming convention for
+all performance and system functional tests, introduced in CSIT-17.01.
 
 The naming should be intuitive for majority of the tests. Complete
 description of FD.io CSIT test naming convention is provided on