Report: add geneve to perf release notes

[csit.git] / docs / report / vpp_performance_tests / overview.rst

diff --git a/docs/report/vpp_performance_tests/overview.rst b/docs/report/vpp_performance_tests/overview.rst
index 3c95919..9647ede 100644 (file)
--- a/docs/report/vpp_performance_tests/overview.rst
+++ b/docs/report/vpp_performance_tests/overview.rst
@@ -1,9 +1,7 @@
 Overview
 ========
 
-VPP performance test results are reported for all three physical testbed
-types present in FD.io labs: 3-Node Xeon Haswell (3n-hsw), 3-Node Xeon
-Skylake (3n-skx), 2-Node Xeon Skylake (2n-skx) and installed NIC models.
+VPP performance test results are reported for a range of processors.
 For description of physical testbeds used for VPP performance tests
 please refer to :ref:`tested_physical_topologies`.
 
@@ -260,13 +258,20 @@ topologies and configurations:
 
 - One-Way Packet Latency: measured at different offered packet loads:
 
-  - 100% of discovered NDR throughput.
-  - 100% of discovered PDR throughput.
+  - 90% of discovered PDR throughput.
+  - 50% of discovered PDR throughput.
+  - 10% of discovered PDR throughput.
+  - Minimal offered load.
 
 - Maximum Receive Rate (MRR): measure packet forwarding rate under the
   maximum load offered by traffic generator over a set trial duration,
   regardless of packet loss. Maximum load for specified Ethernet frame
-  size is set to the bi-directional link rate.
+  size is set to the bi-directional link rate, unless there is a known
+  limitation preventing Traffic Generator from achieving the line rate.
+
+.. todo::
+
+   - Connections per second (CPS): TODO
 
 |csit-release| includes following VPP data plane functionality
 performance tested across a range of NIC drivers and NIC models:
@@ -278,9 +283,11 @@ performance tested across a range of NIC drivers and NIC models:
 |                       | IPv4and IPv6 routing with iACL and oACL IP   |
 |                       | address, MAC address and L4 port security.   |
 +-----------------------+----------------------------------------------+
-| COP                   | IPv4 and IPv6 routing with COP address       |
+| ADL                   | IPv4 and IPv6 routing with ADL address       |
 |                       | security.                                    |
 +-----------------------+----------------------------------------------+
+| GENEVE                | GENEVE tunnels for IPv4 routing.             |
++-----------------------+----------------------------------------------+
 | IPv4                  | IPv4 routing.                                |
 +-----------------------+----------------------------------------------+
 | IPv6                  | IPv6 routing.                                |
@@ -291,7 +298,11 @@ performance tested across a range of NIC drivers and NIC models:
 | IPv6 Scale            | IPv6 routing with 20k, 200k and 2M FIB       |
 |                       | entries.                                     |
 +-----------------------+----------------------------------------------+
-| IPSecHW               | IPSec encryption with AES-GCM, CBC-SHA1      |
+| IPSecAsyncHW          | IPSec encryption with AES-GCM, CBC-SHA-256   |
+|                       | ciphers in async mode, in combination with   |
+|                       | IPv4 routing. Intel QAT HW acceleration.     |
++-----------------------+----------------------------------------------+
+| IPSecHW               | IPSec encryption with AES-GCM, CBC-SHA-256   |
 |                       | ciphers, in combination with IPv4 routing.   |
 |                       | Intel QAT HW acceleration.                   |
 +-----------------------+----------------------------------------------+
@@ -299,15 +310,11 @@ performance tested across a range of NIC drivers and NIC models:
 |                       | combination with LISP-GPE overlay tunneling  |
 |                       | for IPv4-over-IPv4.                          |
 +-----------------------+----------------------------------------------+
-| IPSecSW               | IPSec encryption with AES-GCM, CBC-SHA1      |
+| IPSecSW               | IPSec encryption with AES-GCM, CBC-SHA-256   |
 |                       | ciphers, in combination with IPv4 routing.   |
 +-----------------------+----------------------------------------------+
-| K8s Containers Memif  | K8s orchestrated container VPP service chain |
-|                       | topologies connected over the memif virtual  |
-|                       | interface.                                   |
-+-----------------------+----------------------------------------------+
 | KVM VMs vhost-user    | Virtual topologies with service              |
-|                       | chains of 1 and 2 VMs using vhost-user       |
+|                       | chains of 1 VM using vhost-user              |
 |                       | interfaces, with different VPP forwarding    |
 |                       | modes incl. L2XC, L2BD, VXLAN with L2BD,     |
 |                       | IPv4 routing.                                |
@@ -334,9 +341,10 @@ performance tested across a range of NIC drivers and NIC models:
 | Memif                 | with different VPP forwarding modes incl.    |
 |                       | L2XC, L2BD.                                  |
 +-----------------------+----------------------------------------------+
-| NAT                   | (Source) Network Address Translation tests   |
-|                       | with varying number of users and ports per   |
-|                       | user.                                        |
+| NAT44                 | (Source) Network Address Translation         |
+|                       | deterministic mode and endpoint-dependent    |
+|                       | mode tests with varying number of users and  |
+|                       | ports per user for IPv4.                     |
 +-----------------------+----------------------------------------------+
 | QoS Policer           | Ingress packet rate measuring, marking and   |
 |                       | limiting (IPv4).                             |