Code Review / csit.git / blobdiff
? search:
summary | shortlog | log | commit | commitdiff | review | tree
raw | inline | side by side
Report: Add 3n-icx
[csit.git] / docs / report / vpp_performance_tests / packet_throughput_graphs / ip4.rst
diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst
index 786b022..1595835 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst
@@ -1,5 +1,10 @@
-IPv4 Routed-Forwarding
-======================
+
+.. raw:: latex
+
+    \clearpage
+
+IPv4 Routing
+============
 
 Following sections include summary graphs of VPP Phy-to-Phy performance
 with IPv4 Routed-Forwarding, including NDR throughput (zero packet loss)
@@ -7,143 +12,26 @@ and PDR throughput (<0.5% packet loss). Performance is reported for VPP
 running in multiple configurations of VPP worker thread(s), a.k.a. VPP
 data plane thread(s), and their physical CPU core(s) placement.
 
-NDR Throughput
-~~~~~~~~~~~~~~
-
-VPP NDR 64B packet throughput in 1t1c setup (1thread, 1core) is presented
-in the graph below.
-
-.. raw:: html
-
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-ethip4-ip4-ndrdisc.html"></iframe>
-
-.. raw:: latex
-
-    \begin{figure}[H]
-        \centering
-            \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-ethip4-ip4-ndrdisc}
-            \label{fig:64B-1t1c-ethip4-ip4-ndrdisc}
-    \end{figure}
-
-*Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.*
-
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip4
-      $ grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
-
-VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
-in the graph below.
-
-.. raw:: html
-
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-ethip4-ip4-ndrdisc.html"></iframe>
-
-.. raw:: latex
-
-    \begin{figure}[H]
-        \centering
-            \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-ethip4-ip4-ndrdisc}
-            \label{fig:64B-2t2c-ethip4-ip4-ndrdisc}
-    \end{figure}
-
-*Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv4
-Routed-Forwarding.*
-
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip4
-      $ grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
-
-PDR Throughput
-~~~~~~~~~~~~~~
-
-VPP PDR 64B packet throughput in 1t1c setup (1thread, 1core) is presented
-in the graph below. PDR measured for 0.5% packet loss ratio.
-
-.. raw:: html
-
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-ethip4-ip4-pdrdisc.html"></iframe>
-
-.. raw:: latex
-
-    \begin{figure}[H]
-        \centering
-            \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-ethip4-ip4-pdrdisc}
-            \label{fig:64B-1t1c-ethip4-ip4-pdrdisc}
-    \end{figure}
-
-*Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv4
-Routed-Forwarding.*
-
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip4
-      $ grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' *
-
-VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
-in the graph below. PDR measured for 0.5% packet loss ratio.
-
-.. raw:: html
-
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-ethip4-ip4-pdrdisc.html"></iframe>
-
-.. raw:: latex
-
-    \begin{figure}[H]
-        \centering
-            \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-ethip4-ip4-pdrdisc}
-            \label{fig:64B-2t2c-ethip4-ip4-pdrdisc}
-    \end{figure}
-
-*Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv4
-Routed-Forwarding.*
-
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip4
-      $ grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' *
+CSIT source code for the test cases used for plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4?h=rls2110>`_.
+
+.. toctree::
+
+    ip4-2n-skx-xxv710
+    ip4-2n-skx-x710
+    ip4-3n-skx-xxv710
+    ip4-3n-skx-x710
+    ip4-2n-clx-xxv710
+    ip4-2n-clx-x710
+    ip4-2n-clx-cx556a
+    ip4-2n-icx-e810cq
+    ip4-3n-icx-e810cq
+    ip4-2n-zn2-xxv710
+    ip4-2n-zn2-x710
+    ip4-2n-zn2-cx556a
+    ip4-3n-tsh-x520
+    ip4-2n-tx2-xl710
+    ip4-2n-dnv-x553
+    ip4-3n-dnv-x553
+    ip4-2n-aws-nitro50g
+    ip4-3n-aws-nitro50g
Integration tests