CSIT-618 Add LaTeX support to release report

[csit.git] / docs / report / vpp_performance_tests / packet_throughput_graphs / ip4.rst

diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst
index 5f35db1..6596f69 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst
@@ -17,13 +17,31 @@ in the graph below.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-ethip4-ip4-ndrdisc.html"></iframe>
 
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-ethip4-ip4-ndrdisc.html"></iframe>
 

+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-ethip4-ip4-ndrdisc}
+            \label{fig:64B-1t1c-ethip4-ip4-ndrdisc}
+    \end{figure}
+

 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 

-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/ip4
+      $ grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *

 
 VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.
 
 VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.


@@ -32,14 +50,32 @@ in the graph below.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-ethip4-ip4-ndrdisc.html"></iframe>
 
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-ethip4-ip4-ndrdisc.html"></iframe>
 

+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-ethip4-ip4-ndrdisc}
+            \label{fig:64B-2t2c-ethip4-ip4-ndrdisc}
+    \end{figure}
+

 *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv4
 Routed-Forwarding.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
 *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv4
 Routed-Forwarding.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 

-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/ip4
+      $ grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *

 
 PDR Throughput
 ~~~~~~~~~~~~~~
 
 PDR Throughput
 ~~~~~~~~~~~~~~


@@ -51,14 +87,32 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-ethip4-ip4-pdrdisc.html"></iframe>
 
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-ethip4-ip4-pdrdisc.html"></iframe>
 

+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-ethip4-ip4-pdrdisc}
+            \label{fig:64B-1t1c-ethip4-ip4-pdrdisc}
+    \end{figure}
+

 *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv4
 Routed-Forwarding.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
 *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv4
 Routed-Forwarding.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 

-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/ip4
+      $ grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' *

 
 VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.
 
 VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.


@@ -67,12 +121,29 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-ethip4-ip4-pdrdisc.html"></iframe>
 
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-ethip4-ip4-pdrdisc.html"></iframe>
 

+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-ethip4-ip4-pdrdisc}
+            \label{fig:64B-2t2c-ethip4-ip4-pdrdisc}
+    \end{figure}
+

 *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv4
 Routed-Forwarding.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
 *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv4
 Routed-Forwarding.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 

-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash

 
 

+      $ cd tests/vpp/perf/ip4
+      $ grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' *