Report: remove greps

[csit.git] / docs / report / vpp_performance_tests / packet_throughput_graphs / ip4_tunnels.rst

diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4_tunnels.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4_tunnels.rst
index 43fef1a..7b75f7e 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4_tunnels.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4_tunnels.rst
@@ -17,14 +17,20 @@ in the graph below.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-ethip4-ndrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-ethip4-ndrdisc}
+            \label{fig:64B-1t1c-ethip4-ndrdisc}
+    \end{figure}
+
 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv4 Overlay
 Tunnels.*
 
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
-   :shell:
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4_tunnels?h=rls1804>`_.
 
 VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.
@@ -33,13 +39,19 @@ in the graph below.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-ethip4-ndrdisc.html"></iframe>
 
-*Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv4 Overlay Tunnels.*
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-ethip4-ndrdisc}
+            \label{fig:64B-2t2c-ethip4-ndrdisc}
+    \end{figure}
 
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
+*Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv4 Overlay Tunnels.*
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
-   :shell:
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4_tunnels?h=rls1804>`_.
 
 PDR Throughput
 ~~~~~~~~~~~~~~
@@ -51,14 +63,20 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-ethip4-pdrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-ethip4-pdrdisc}
+            \label{fig:64B-1t1c-ethip4-pdrdisc}
+    \end{figure}
+
 *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv4 Overlay
 Tunnels.*
 
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" *
-   :shell:
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4_tunnels?h=rls1804>`_.
 
 VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.
@@ -67,11 +85,16 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-ethip4-pdrdisc.html"></iframe>
 
-*Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv4 Overlay Tunnels.*
+.. raw:: latex
 
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-ethip4-pdrdisc}
+            \label{fig:64B-2t2c-ethip4-pdrdisc}
+    \end{figure}
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" *
-   :shell:
+*Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv4 Overlay Tunnels.*
 
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4_tunnels?h=rls1804>`_.