CSIT-755: Presentation and analytics layer

[csit.git] / docs / report / vpp_performance_tests / packet_throughput_graphs / ip4_tunnels.rst

diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4_tunnels.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4_tunnels.rst
index 39432ca..a4112a7 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4_tunnels.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4_tunnels.rst
@@ -17,21 +17,32 @@ in the graph below.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-ethip4-ndrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-ethip4-ndrdisc}
+            \label{fig:64B-1t1c-ethip4-ndrdisc}
+    \end{figure}
+
 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv4 Overlay
 Tunnels.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. code-block:: bash
+.. only:: html
+
+   .. program-output:: cd ../../../../../ && set -x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
+      :shell:
+
+.. only:: latex
 
-    $ cd $CSIT/tests/vpp/perf/ip4_tunnels
-    $ grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
+   .. code-block:: bash
 
-    10ge2p1x520-ethip4lispip4-ip4base-ndrpdrdisc.robot:| tc01-64B-1t1c-ethip4lispip4-ip4base-ndrdisc
-    10ge2p1x520-ethip4lispip6-ip4base-ndrpdrdisc.robot:| tc01-64B-1t1c-ethip4lispip6-ip4base-ndrdisc
-    10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-ndrpdrdisc.robot:| tc01-64B-1t1c-ethip4vxlan-l2bdbasemaclrn-ndrdisc
-    10ge2p1x520-ethip4vxlan-l2xcbase-ndrpdrdisc.robot:| tc01-64B-1t1c-ethip4vxlan-l2xcbase-ndrdisc
+      $ cd tests/vpp/perf/ip4_tunnels
+      $ grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
 
 VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.
@@ -40,20 +51,31 @@ in the graph below.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-ethip4-ndrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-ethip4-ndrdisc}
+            \label{fig:64B-2t2c-ethip4-ndrdisc}
+    \end{figure}
+
 *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv4 Overlay Tunnels.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. code-block:: bash
+.. only:: html
+
+   .. program-output:: cd ../../../../../ && set -x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
+      :shell:
+
+.. only:: latex
 
-    $ cd $CSIT/tests/vpp/perf/ip4_tunnels
-    $ grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
+   .. code-block:: bash
 
-    10ge2p1x520-ethip4lispip4-ip4base-ndrpdrdisc.robot:| tc07-64B-2t2c-ethip4lispip4-ip4base-ndrdisc
-    10ge2p1x520-ethip4lispip6-ip4base-ndrpdrdisc.robot:| tc07-64B-2t2c-ethip4lispip6-ip4base-ndrdisc
-    10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-ndrpdrdisc.robot:| tc07-64B-2t2c-ethip4vxlan-l2bdbasemaclrn-ndrdisc
-    10ge2p1x520-ethip4vxlan-l2xcbase-ndrpdrdisc.robot:| tc07-64B-2t2c-ethip4vxlan-l2xcbase-ndrdisc
+      $ cd tests/vpp/perf/ip4_tunnels
+      $ grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
 
 PDR Throughput
 ~~~~~~~~~~~~~~
@@ -65,21 +87,32 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-ethip4-pdrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-ethip4-pdrdisc}
+            \label{fig:64B-1t1c-ethip4-pdrdisc}
+    \end{figure}
+
 *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv4 Overlay
 Tunnels.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. code-block:: bash
+.. only:: html
+
+   .. program-output:: cd ../../../../../ && set -x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" *
+      :shell:
+
+.. only:: latex
 
-    $ cd $CSIT/tests/vpp/perf/ip4_tunnels
-    $ grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" *
+   .. code-block:: bash
 
-    10ge2p1x520-ethip4lispip4-ip4base-ndrpdrdisc.robot:| tc02-64B-1t1c-ethip4lispip4-ip4base-pdrdisc
-    10ge2p1x520-ethip4lispip6-ip4base-ndrpdrdisc.robot:| tc02-64B-1t1c-ethip4lispip6-ip4base-pdrdisc
-    10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-ndrpdrdisc.robot:| tc02-64B-1t1c-ethip4vxlan-l2bdbasemaclrn-pdrdisc
-    10ge2p1x520-ethip4vxlan-l2xcbase-ndrpdrdisc.robot:| tc02-64B-1t1c-ethip4vxlan-l2xcbase-pdrdisc
+      $ cd tests/vpp/perf/ip4_tunnels
+      $ grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" *
 
 VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.
@@ -88,18 +121,28 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-ethip4-pdrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-ethip4-pdrdisc}
+            \label{fig:64B-2t2c-ethip4-pdrdisc}
+    \end{figure}
+
 *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv4 Overlay Tunnels.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. code-block:: bash
+.. only:: html
+
+   .. program-output:: cd ../../../../../ && set -x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" *
+      :shell:
 
-    $ cd $CSIT/tests/vpp/perf/ip4_tunnels
-    $ grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" *
+.. only:: latex
 
-    10ge2p1x520-ethip4lispip4-ip4base-ndrpdrdisc.robot:| tc08-64B-2t2c-ethip4lispip4-ip4base-pdrdisc
-    10ge2p1x520-ethip4lispip6-ip4base-ndrpdrdisc.robot:| tc08-64B-2t2c-ethip4lispip6-ip4base-pdrdisc
-    10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-ndrpdrdisc.robot:| tc08-64B-2t2c-ethip4vxlan-l2bdbasemaclrn-pdrdisc
-    10ge2p1x520-ethip4vxlan-l2xcbase-ndrpdrdisc.robot:| tc08-64B-2t2c-ethip4vxlan-l2xcbase-pdrdisc
+   .. code-block:: bash
 
+      $ cd tests/vpp/perf/ip4_tunnels
+      $ grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" *