Report: plots

[csit.git] / docs / report / vpp_performance_tests / packet_throughput_graphs / ipsec.rst

diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst
index ebd7875..3d8d175 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst
@@ -10,11 +10,6 @@ Performance is reported for VPP running in multiple configurations of
 VPP worker thread(s), a.k.a. VPP data plane thread(s), and their
 physical CPU core(s) placement.
 
 VPP worker thread(s), a.k.a. VPP data plane thread(s), and their
 physical CPU core(s) placement.
 

-Note: only 1,000 scale IPSec tunnel test cases are plotted. Single IPSec
-tunnel test cases are listed in regex outputs, but marked {NOT PLOTTED}
-due to the current limitation of auto-plotting scripts. For all test
-result data please refere to **Detailed Test Results** section.
-

 NDR Throughput
 ~~~~~~~~~~~~~~
 
 NDR Throughput
 ~~~~~~~~~~~~~~
 


@@ -25,13 +20,31 @@ in the graph below.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-ipsechw-ndrdisc.html"></iframe>
 
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-ipsechw-ndrdisc.html"></iframe>
 

+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-ipsechw-ndrdisc}
+            \label{fig:64B-1t1c-ipsechw-ndrdisc}
+    \end{figure}
+

 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPSEC HW.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPSEC HW.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 

-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-1t1c-.*ipsec.*-ndrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-1t1c-.*ipsec.*-ndrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/crypto
+      $ grep -E "64B-1t1c-.*ipsec.*-ndrdisc" *

 
 VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.
 
 VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.


@@ -40,13 +53,31 @@ in the graph below.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-ipsechw-ndrdisc.html"></iframe>
 
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-ipsechw-ndrdisc.html"></iframe>
 

+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-ipsechw-ndrdisc}
+            \label{fig:64B-2t2c-ipsechw-ndrdisc}
+    \end{figure}
+

 *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPSEC HW.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
 *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPSEC HW.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 

-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-2t2c-.*ipsec.*-ndrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-2t2c-.*ipsec.*-ndrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/crypto
+      $ grep -E "64B-2t2c-.*ipsec.*-ndrdisc" *

 
 PDR Throughput
 ~~~~~~~~~~~~~~
 
 PDR Throughput
 ~~~~~~~~~~~~~~


@@ -58,13 +89,31 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-ipsechw-pdrdisc.html"></iframe>
 
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-ipsechw-pdrdisc.html"></iframe>
 

+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-ipsechw-pdrdisc}
+            \label{fig:64B-1t1c-ipsechw-pdrdisc}
+    \end{figure}
+

 *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPSEC HW.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
 *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPSEC HW.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 

-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-1t1c-.*ipsec.*-pdrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-1t1c-.*ipsec.*-pdrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/crypto
+      $ grep -E "64B-1t1c-.*ipsec.*-pdrdisc" *

 
 VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.
 
 VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.


@@ -73,10 +122,28 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-ipsechw-pdrdisc.html"></iframe>
 
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-ipsechw-pdrdisc.html"></iframe>
 

+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-ipsechw-pdrdisc}
+            \label{fig:64B-2t2c-ipsechw-pdrdisc}
+    \end{figure}
+

 *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPSEC HW.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
 *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPSEC HW.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 

-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-2t2c-.*ipsec.*-pdrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-2t2c-.*ipsec.*-pdrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/crypto
+      $ grep -E "64B-2t2c-.*ipsec.*-pdrdisc" *