CSIT-618 Add LaTeX support to release report

[csit.git] / docs / report / vpp_performance_tests / packet_throughput_graphs / ipsec.rst

diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst
index eba3a40..b59a521 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst
@@ -20,13 +20,31 @@ in the graph below.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-ipsechw-ndrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-ipsechw-ndrdisc}
+            \label{fig:64B-1t1c-ipsechw-ndrdisc}
+    \end{figure}
+
 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPSEC HW.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-1t1c-.*ipsec.*-ndrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-1t1c-.*ipsec.*-ndrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/crypto
+      $ grep -E "64B-1t1c-.*ipsec.*-ndrdisc" *
 
 VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.
@@ -35,13 +53,31 @@ in the graph below.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-ipsechw-ndrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-ipsechw-ndrdisc}
+            \label{fig:64B-2t2c-ipsechw-ndrdisc}
+    \end{figure}
+
 *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPSEC HW.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-2t2c-.*ipsec.*-ndrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-2t2c-.*ipsec.*-ndrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/crypto
+      $ grep -E "64B-2t2c-.*ipsec.*-ndrdisc" *
 
 PDR Throughput
 ~~~~~~~~~~~~~~
@@ -53,13 +89,31 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-ipsechw-pdrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-ipsechw-pdrdisc}
+            \label{fig:64B-1t1c-ipsechw-pdrdisc}
+    \end{figure}
+
 *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPSEC HW.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-1t1c-.*ipsec.*-pdrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-1t1c-.*ipsec.*-pdrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/crypto
+      $ grep -E "64B-1t1c-.*ipsec.*-pdrdisc" *
 
 VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.
@@ -68,10 +122,28 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-ipsechw-pdrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-ipsechw-pdrdisc}
+            \label{fig:64B-2t2c-ipsechw-pdrdisc}
+    \end{figure}
+
 *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPSEC HW.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-2t2c-.*ipsec.*-pdrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-2t2c-.*ipsec.*-pdrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/crypto
+      $ grep -E "64B-2t2c-.*ipsec.*-pdrdisc" *