L2 Ethernet Switching
=====================
-Following sections provide a summary of VPP Phy-to-Phy L2 Ethernet switching
-performance illustrating NDR throughput (zero packet loss) and PDR throughput
-(<0.5% packet loss). Performance is reported for VPP running in multiple
-configurations of VPP worker thread(s), a.k.a. VPP data plane thread (s), and
-their physical CPU core(s) placement.
-
-Title of each graph is a regex (regular expression) matching all plotted
-test case throughput measurements.
-
-.. note::
-
- Data sources for reported test results: i) FD.io test executor jobs
- `csit-vpp-perf-1701-all
- <https://jenkins.fd.io/view/csit/job/csit-vpp-perf-1701-all/>`_ and
- `csit-vpp-perf-1701-long
- <https://jenkins.fd.io/view/csit/job/csit-vpp-perf-1701-long/>`_
- , ii) archived FD.io jobs test result `output files
- <../../_static/archive/>`_.
+Following sections include summary graphs of VPP Phy-to-Phy performance
+with L2 Ethernet switching, including NDR throughput (zero packet loss)
+and PDR throughput (<0.5% packet loss). Performance is reported for VPP
+running in multiple configurations of VPP worker thread(s), a.k.a. VPP
+data plane thread(s), and their physical CPU core(s) placement.
NDR Throughput
~~~~~~~~~~~~~~
-VPP NDR Throughput - running in configuration of **one worker thread (1t) on
-one physical core (1c)** - is presented in the figure below.
+VPP NDR 64B packet throughput in 1t1c setup (1thread, 1core) is presented
+in the graph below.
.. raw:: html
- <iframe width="700" height="700" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-l2-ndrdisc.html"></iframe>
+ <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-l2-sel1-ndrdisc.html"></iframe>
+
+.. raw:: latex
+
+ \begin{figure}[H]
+ \centering
+ \graphicspath{{../_build/_static/vpp/}}
+ \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-l2-sel1-ndrdisc}
+ \label{fig:64B-1t1c-l2-sel1-ndrdisc}
+ \end{figure}
*Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
-Switching.*
+Switching (base).*
+
+CSIT source code for the test cases used for above plots can be found in CSIT
+git repository:
+
+.. only:: html
+
+ .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2/ && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" *
+ :shell:
+
+.. only:: latex
+
+ .. code-block:: bash
+
+ $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/*
+
+
+.. raw:: html
+
+ <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-l2-sel2-ndrdisc.html"></iframe>
+
+.. raw:: latex
+
+ \begin{figure}[H]
+ \centering
+ \graphicspath{{../_build/_static/vpp/}}
+ \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-l2-sel2-ndrdisc}
+ \label{fig:64B-1t1c-l2-sel2-ndrdisc}
+ \end{figure}
+
+*Figure 2. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
+Switching (feature).*
+
+CSIT source code for the test cases used for above plots can be found in CSIT
+git repository:
+
+.. only:: html
-CSIT test cases used to generate results presented above can be found in CSIT
-git repository by filtering with specified regex as follows:
+ .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl(10|50)(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl(10|50)-state(ful|less)-flows10k.*)-ndrdisc" *
+ :shell:
-.. code-block:: bash
+.. only:: latex
- $ csit/tests/perf
- $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-ndrdisc" *
+ .. code-block:: bash
- 10ge2p1vic1227-eth-l2bdbasemaclrn-ndrdisc.robot:| tc01-64B-1t1c-eth-l2bdbasemaclrn-ndrdisc
- 10ge2p1x520-dot1ad-l2xcbase-ndrdisc.robot:| tc01-64B-1t1c-dot1ad-l2xcbase-ndrdisc
- 10ge2p1x520-dot1q-l2xcbase-ndrdisc.robot:| tc01-64B-1t1c-dot1q-l2xcbase-ndrdisc
- 10ge2p1x520-eth-l2bdbasemaclrn-ndrdisc.robot:| tc01-64B-1t1c-eth-l2bdbasemaclrn-ndrdisc
- 10ge2p1x520-eth-l2xcbase-ndrdisc.robot:| tc01-64B-1t1c-eth-l2xcbase-ndrdisc
- 10ge2p1x710-eth-l2bdbasemaclrn-ndrdisc.robot:| tc01-64B-1t1c-eth-l2bdbasemaclrn-ndrdisc
- 40ge2p1vic1385-eth-l2bdbasemaclrn-ndrdisc.robot:| tc01-64B-1t1c-eth-l2bdbasemaclrn-ndrdisc
- 40ge2p1xl710-eth-l2bdbasemaclrn-ndrdisc.robot:| tc01-64B-1t1c-eth-l2bdbasemaclrn-ndrdisc
- 40ge2p1xl710-eth-l2xcbase-ndrdisc.robot:| tc01-64B-1t1c-eth-l2xcbase-ndrdisc
+ $ cd tests/vpp/perf/l2
+ $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl(10|50)(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl(10|50)-state(ful|less)-flows10k.*)-ndrdisc" *
-VPP NDR Throughput - running in configuration of **two worker threads (2t) on two
-physical cores (2c)** - is presented in the figure below.
+VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
+in the graph below.
.. raw:: html
- <iframe width="700" height="700" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-l2-ndrdisc.html"></iframe>
+ <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-l2-sel1-ndrdisc.html"></iframe>
-*Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet
-Switching.*
+.. raw:: latex
-CSIT test cases used to generate results presented above can be found in CSIT
-git repository by filtering with specified regex as follows:
+ \begin{figure}[H]
+ \centering
+ \graphicspath{{../_build/_static/vpp/}}
+ \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-l2-sel1-ndrdisc}
+ \label{fig:64B-2t2c-l2-sel1-ndrdisc}
+ \end{figure}
-.. code-block:: bash
+*Figure 3. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet
+Switching (base).*
- $ csit/tests/perf
- $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in CSIT
+git repository:
- 10ge2p1vic1227-eth-l2bdbasemaclrn-ndrdisc.robot:| tc07-64B-2t2c-eth-l2bdbasemaclrn-ndrdisc
- 10ge2p1x520-dot1ad-l2xcbase-ndrdisc.robot:| tc07-64B-2t2c-dot1ad-l2xcbase-ndrdisc
- 10ge2p1x520-dot1q-l2xcbase-ndrdisc.robot:| tc07-64B-2t2c-dot1q-l2xcbase-ndrdisc
- 10ge2p1x520-eth-l2bdbasemaclrn-ndrdisc.robot:| tc07-64B-2t2c-eth-l2bdbasemaclrn-ndrdisc
- 10ge2p1x520-eth-l2xcbase-ndrdisc.robot:| tc07-64B-2t2c-eth-l2xcbase-ndrdisc
- 10ge2p1x710-eth-l2bdbasemaclrn-ndrdisc.robot:| tc07-64B-2t2c-eth-l2bdbasemaclrn-ndrdisc
- 40ge2p1vic1385-eth-l2bdbasemaclrn-ndrdisc.robot:| tc07-64B-2t2c-eth-l2bdbasemaclrn-ndrdisc
- 40ge2p1xl710-eth-l2bdbasemaclrn-ndrdisc.robot:| tc07-64B-2t2c-eth-l2bdbasemaclrn-ndrdisc
- 40ge2p1xl710-eth-l2xcbase-ndrdisc.robot:| tc07-64B-2t2c-eth-l2xcbase-ndrdisc
+.. only:: html
+
+ .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2/ && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" *
+ :shell:
+
+.. only:: latex
+
+ .. code-block:: bash
+
+ $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/*
-VPP NDR Throughput - running in configuration of **four worker threads (4t) on
-four physical cores (4c)** - is presented in the figure below.
.. raw:: html
- <iframe width="700" height="700" frameborder="0" scrolling="no" src="../../_static/vpp/64B-4t4c-l2-ndrdisc.html"></iframe>
+ <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-l2-sel2-ndrdisc.html"></iframe>
+
+.. raw:: latex
+
+ \begin{figure}[H]
+ \centering
+ \graphicspath{{../_build/_static/vpp/}}
+ \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-l2-sel2-ndrdisc}
+ \label{fig:64B-2t2c-l2-sel2-ndrdisc}
+ \end{figure}
-*Figure 3. VPP 4threads 4cores - NDR Throughput for Phy-to-Phy L2 Ethernet
-Switching.*
+*Figure 4. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet
+Switching (feature).*
-CSIT test cases used to generate results presented above can be found in CSIT
-git repository by filtering with specified regex as follows:
+CSIT source code for the test cases used for above plots can be found in CSIT
+git repository:
-.. code-block:: bash
+.. only:: html
- $ csit/tests/perf
- $ grep -E "64B-4t4c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-ndrdisc" *
+ .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl(10|50)(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl(10|50)-state(ful|less)-flows10k.*)-ndrdisc" *
+ :shell:
+
+.. only:: latex
+
+ .. code-block:: bash
+
+ $ cd tests/vpp/perf/l2
+ $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl(10|50)(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl(10|50)-state(ful|less)-flows10k.*)-ndrdisc" *
- 10ge2p1vic1227-eth-l2bdbasemaclrn-ndrdisc.robot:| tc13-64B-4t4c-eth-l2bdbasemaclrn-ndrdisc
- 10ge2p1x520-dot1ad-l2xcbase-ndrdisc.robot:| tc13-64B-4t4c-dot1ad-l2xcbase-ndrdisc
- 10ge2p1x520-dot1q-l2xcbase-ndrdisc.robot:| tc13-64B-4t4c-dot1q-l2xcbase-ndrdisc
- 10ge2p1x520-eth-l2bdbasemaclrn-ndrdisc.robot:| tc13-64B-4t4c-eth-l2bdbasemaclrn-ndrdisc
- 10ge2p1x520-eth-l2xcbase-ndrdisc.robot:| tc13-64B-4t4c-eth-l2xcbase-ndrdisc
- 10ge2p1x710-eth-l2bdbasemaclrn-ndrdisc.robot:| tc13-64B-4t4c-eth-l2bdbasemaclrn-ndrdisc
- 40ge2p1vic1385-eth-l2bdbasemaclrn-ndrdisc.robot:| tc13-64B-4t4c-eth-l2bdbasemaclrn-ndrdisc
- 40ge2p1xl710-eth-l2bdbasemaclrn-ndrdisc.robot:| tc13-64B-4t4c-eth-l2bdbasemaclrn-ndrdisc
- 40ge2p1xl710-eth-l2xcbase-ndrdisc.robot:| tc13-64B-4t4c-eth-l2xcbase-ndrdisc
PDR Throughput
~~~~~~~~~~~~~~
-VPP PDR Throughput - running in configuration of **one worker thread (1t) on one
-physical core (1c)** - is presented in the figure below. PDR at below 0.5% packet
-loss ratio.
+VPP PDR 64B packet throughput in 1t1c setup (1thread, 1core) is presented
+in the graph below. PDR measured for 0.5% packet loss ratio.
+
+.. raw:: html
+
+ <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-l2-sel1-pdrdisc.html"></iframe>
+
+.. raw:: latex
+
+ \begin{figure}[H]
+ \centering
+ \graphicspath{{../_build/_static/vpp/}}
+ \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-l2-sel1-pdrdisc}
+ \label{fig:64B-1t1c-l2-sel1-pdrdisc}
+ \end{figure}
+
+*Figure 5. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet
+Switching (base).*
+
+CSIT source code for the test cases used for above plots can be found in CSIT
+git repository:
+
+.. only:: html
+
+ .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2/ && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*pdrdisc" *
+ :shell:
+
+.. only:: latex
+
+ .. code-block:: bash
+
+ $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/*
+
.. raw:: html
- <iframe width="700" height="700" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-l2-pdrdisc.html"></iframe>
+ <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-l2-sel2-pdrdisc.html"></iframe>
+
+.. raw:: latex
+
+ \begin{figure}[H]
+ \centering
+ \graphicspath{{../_build/_static/vpp/}}
+ \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-l2-sel2-pdrdisc}
+ \label{fig:64B-1t1c-l2-sel2-pdrdisc}
+ \end{figure}
+
+*Figure 6. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet
+Switching (feature).*
+
+CSIT source code for the test cases used for above plots can be found in CSIT
+git repository:
-*Figure 4. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet
-Switching.*
+.. only:: html
-CSIT test cases used to generate results presented above can be found in CSIT
-git repository by filtering with specified regex as follows:
+ .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl(10|50)(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl(10|50)-state(ful|less)-flows10k.*)-pdrdisc" *
+ :shell:
-.. code-block:: bash
+.. only:: latex
- $ csit/tests/perf
- $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-pdrdisc" *
+ .. code-block:: bash
- 10ge2p1vic1227-eth-l2bdbasemaclrn-ndrdisc.robot:| tc02-64B-1t1c-eth-l2bdbasemaclrn-pdrdisc
- 10ge2p1x520-dot1ad-l2xcbase-ndrdisc.robot:| tc02-64B-1t1c-dot1ad-l2xcbase-pdrdisc
- 10ge2p1x520-dot1q-l2xcbase-ndrdisc.robot:| tc02-64B-1t1c-dot1q-l2xcbase-pdrdisc
- 10ge2p1x520-eth-l2bdbasemaclrn-ndrdisc.robot:| tc02-64B-1t1c-eth-l2bdbasemaclrn-pdrdisc
- 10ge2p1x520-eth-l2xcbase-ndrdisc.robot:| tc02-64B-1t1c-eth-l2xcbase-pdrdisc
- 10ge2p1x710-eth-l2bdbasemaclrn-ndrdisc.robot:| tc02-64B-1t1c-eth-l2bdbasemaclrn-pdrdisc
- 40ge2p1vic1385-eth-l2bdbasemaclrn-ndrdisc.robot:| tc02-64B-1t1c-eth-l2bdbasemaclrn-pdrdisc
+ $ cd tests/vpp/perf/l2
+ $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl(10|50)(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl(10|50)-state(ful|less)-flows10k.*)-pdrdisc" *
-VPP PDR Throughput - running in configuration of **two worker threads (2t) on
-two physical cores (2c)** - is presented in the figure below.
+VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
+in the graph below. PDR measured for 0.5% packet loss ratio.
.. raw:: html
- <iframe width="700" height="700" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-l2-pdrdisc.html"></iframe>
+ <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-l2-sel1-pdrdisc.html"></iframe>
-*Figure 5. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet
-Switching.*
+.. raw:: latex
-CSIT test cases used to generate results presented above can be found in CSIT
-git repository by filtering with specified regex as follows:
+ \begin{figure}[H]
+ \centering
+ \graphicspath{{../_build/_static/vpp/}}
+ \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-l2-sel1-pdrdisc}
+ \label{fig:64B-2t2c-l2-sel1-pdrdisc}
+ \end{figure}
-.. code-block:: bash
+*Figure 7. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet
+Switching (base).*
- $ csit/tests/perf
- $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in CSIT
+git repository:
- 10ge2p1vic1227-eth-l2bdbasemaclrn-ndrdisc.robot:| tc08-64B-2t2c-eth-l2bdbasemaclrn-pdrdisc
- 10ge2p1x520-dot1ad-l2xcbase-ndrdisc.robot:| tc08-64B-2t2c-dot1ad-l2xcbase-pdrdisc
- 10ge2p1x520-dot1q-l2xcbase-ndrdisc.robot:| tc08-64B-2t2c-dot1q-l2xcbase-pdrdisc
- 10ge2p1x520-eth-l2bdbasemaclrn-ndrdisc.robot:| tc08-64B-2t2c-eth-l2bdbasemaclrn-pdrdisc
- 10ge2p1x520-eth-l2xcbase-ndrdisc.robot:| tc08-64B-2t2c-eth-l2xcbase-pdrdisc
- 10ge2p1x710-eth-l2bdbasemaclrn-ndrdisc.robot:| tc08-64B-2t2c-eth-l2bdbasemaclrn-pdrdisc
- 40ge2p1vic1385-eth-l2bdbasemaclrn-ndrdisc.robot:| tc08-64B-2t2c-eth-l2bdbasemaclrn-pdrdisc
+.. only:: html
+
+ .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2/ && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*pdrdisc" *
+ :shell:
+
+.. only:: latex
+
+ .. code-block:: bash
+
+ $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/*
-VPP PDR Throughput - running in configuration of **four worker threads (4t) on
-four physical cores (4c)** - is presented in the figure below.
.. raw:: html
- <iframe width="700" height="700" frameborder="0" scrolling="no" src="../../_static/vpp/64B-4t4c-l2-pdrdisc.html"></iframe>
+ <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-l2-sel2-pdrdisc.html"></iframe>
+
+.. raw:: latex
+
+ \begin{figure}[H]
+ \centering
+ \graphicspath{{../_build/_static/vpp/}}
+ \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-l2-sel2-pdrdisc}
+ \label{fig:64B-2t2c-l2-sel2-pdrdisc}
+ \end{figure}
-*Figure 6. VPP 4thread 4core - PDR Throughput for Phy-to-Phy L2 Ethernet
-Switching.*
+*Figure 8. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet
+Switching (feature).*
-CSIT test cases used to generate results presented above can be found in CSIT
-git repository by filtering with specified regex as follows:
+.. only:: html
-.. code-block:: bash
+ .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl(10|50)(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl(10|50)-state(ful|less)-flows10k.*)-pdrdisc" *
+ :shell:
- $ csit/tests/perf
- $ grep -E "64B-4t4c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-pdrdisc" *
+.. only:: latex
- 10ge2p1vic1227-eth-l2bdbasemaclrn-ndrdisc.robot:| tc14-64B-4t4c-eth-l2bdbasemaclrn-pdrdisc
- 10ge2p1x520-dot1ad-l2xcbase-ndrdisc.robot:| tc14-64B-4t4c-dot1ad-l2xcbase-pdrdisc
- 10ge2p1x520-dot1q-l2xcbase-ndrdisc.robot:| tc14-64B-4t4c-dot1q-l2xcbase-pdrdisc
- 10ge2p1x520-eth-l2bdbasemaclrn-ndrdisc.robot:| tc14-64B-4t4c-eth-l2bdbasemaclrn-pdrdisc
- 10ge2p1x520-eth-l2xcbase-ndrdisc.robot:| tc14-64B-4t4c-eth-l2xcbase-pdrdisc
- 10ge2p1x710-eth-l2bdbasemaclrn-ndrdisc.robot:| tc14-64B-4t4c-eth-l2bdbasemaclrn-pdrdisc
+ .. code-block:: bash
+ $ cd tests/vpp/perf/l2
+ $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl(10|50)(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl(10|50)-state(ful|less)-flows10k.*)-pdrdisc" *
Code Review / csit.git / blobdiff