Code Review / csit.git / blobdiff
? search:
summary | shortlog | log | commit | commitdiff | review | tree
raw | inline | side by side
Report: Show TSH results
[csit.git] / docs / report / vpp_performance_tests / packet_throughput_graphs / l2.rst
diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/l2.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/l2.rst
index 0adf9cc..b4b54e0 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/l2.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/l2.rst
@@ -1,3 +1,8 @@
+
+.. raw:: latex
+
+    \clearpage
+
 L2 Ethernet Switching
 =====================
 
@@ -7,266 +12,16 @@ and PDR throughput (<0.5% packet loss). Performance is reported for VPP
 running in multiple configurations of VPP worker thread(s), a.k.a. VPP
 data plane thread(s), and their physical CPU core(s) placement.
 
-NDR Throughput
-~~~~~~~~~~~~~~
-
-VPP NDR 64B packet throughput in 1t1c setup (1thread, 1core) is presented
-in the graph below.
-
-.. raw:: html
-
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-l2-sel1-ndrdisc.html"></iframe>
-
-.. raw:: latex
-
-    \begin{figure}[H]
-        \centering
-            \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-l2-sel1-ndrdisc}
-            \label{fig:64B-1t1c-l2-sel1-ndrdisc}
-    \end{figure}
-
-*Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
-Switching (base).*
-
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2/ && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/*
-
-
-.. raw:: html
-
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-l2-sel2-ndrdisc.html"></iframe>
-
-.. raw:: latex
-
-    \begin{figure}[H]
-        \centering
-            \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-l2-sel2-ndrdisc}
-            \label{fig:64B-1t1c-l2-sel2-ndrdisc}
-    \end{figure}
-
-*Figure 2. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
-Switching (feature).*
-
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl50(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl50-state(ful|less)-flows10k.*)-ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/l2
-      $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl50(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl50-state(ful|less)-flows10k.*)-ndrdisc" *
-
-VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
-in the graph below.
-
-.. raw:: html
-
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-l2-sel1-ndrdisc.html"></iframe>
-
-.. raw:: latex
-
-    \begin{figure}[H]
-        \centering
-            \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-l2-sel1-ndrdisc}
-            \label{fig:64B-2t2c-l2-sel1-ndrdisc}
-    \end{figure}
-
-*Figure 3. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet
-Switching (base).*
-
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2/ && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/*
-
-
-.. raw:: html
-
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-l2-sel2-ndrdisc.html"></iframe>
-
-.. raw:: latex
-
-    \begin{figure}[H]
-        \centering
-            \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-l2-sel2-ndrdisc}
-            \label{fig:64B-2t2c-l2-sel2-ndrdisc}
-    \end{figure}
-
-*Figure 4. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet
-Switching (feature).*
-
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl50(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl50-state(ful|less)-flows10k.*)-ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/l2
-      $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl50(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl50-state(ful|less)-flows10k.*)-ndrdisc" *
-
-
-PDR Throughput
-~~~~~~~~~~~~~~
-
-VPP PDR 64B packet throughput in 1t1c setup (1thread, 1core) is presented
-in the graph below. PDR measured for 0.5% packet loss ratio.
-
-.. raw:: html
-
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-l2-sel1-pdrdisc.html"></iframe>
-
-.. raw:: latex
-
-    \begin{figure}[H]
-        \centering
-            \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-l2-sel1-pdrdisc}
-            \label{fig:64B-1t1c-l2-sel1-pdrdisc}
-    \end{figure}
-
-*Figure 5. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet
-Switching (base).*
-
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2/ && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*pdrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/*
-
-
-.. raw:: html
-
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-l2-sel2-pdrdisc.html"></iframe>
-
-.. raw:: latex
-
-    \begin{figure}[H]
-        \centering
-            \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-l2-sel2-pdrdisc}
-            \label{fig:64B-1t1c-l2-sel2-pdrdisc}
-    \end{figure}
-
-*Figure 6. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet
-Switching (feature).*
-
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl50(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl50-state(ful|less)-flows10k.*)-pdrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/l2
-      $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl50(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl50-state(ful|less)-flows10k.*)-pdrdisc" *
-
-VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
-in the graph below. PDR measured for 0.5% packet loss ratio.
-
-.. raw:: htmlhttps://zoom.us/j/5695787389
-
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-l2-sel1-pdrdisc.html"></iframe>
-
-.. raw:: latex
-
-    \begin{figure}[H]
-        \centering
-            \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-l2-sel1-pdrdisc}
-            \label{fig:64B-2t2c-l2-sel1-pdrdisc}
-    \end{figure}
-
-*Figure 7. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet
-Switching (base).*
-
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2/ && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*pdrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/*
-
-
-.. raw:: html
-
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-l2-sel2-pdrdisc.html"></iframe>
-
-.. raw:: latex
-
-    \begin{figure}[H]
-        \centering
-            \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-l2-sel2-pdrdisc}
-            \label{fig:64B-2t2c-l2-sel2-pdrdisc}
-    \end{figure}
-
-*Figure 8. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet
-Switching (feature).*
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl50(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl50-state(ful|less)-flows10k.*)-pdrdisc" *
-      :shell:
-
-.. only:: latex
+CSIT source code for the test cases used for plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls1908>`_.
 
-   .. code-block:: bash
+.. toctree::
 
-      $ cd tests/vpp/perf/l2
-      $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl50(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl50-state(ful|less)-flows10k.*)-pdrdisc" *
+    l2-2n-skx-xxv710
+    l2-2n-skx-x710
+    l2-3n-skx-xxv710
+    l2-3n-skx-x710
+    l2-3n-hsw-xl710
+    l2-3n-tsh-x520
+    l2-2n-dnv-x553
+    l2-3n-dnv-x553
Integration tests