Report: Add Denverton static content

[csit.git] / docs / report / vpp_performance_tests / throughput_speedup_multi_core / ip6.rst

diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip6.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip6.rst
index 077b330..c21f8d5 100644 (file)
--- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip6.rst
+++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip6.rst
@@ -1,5 +1,10 @@
-IPv6 Routed-Forwarding
-======================
+
+.. raw:: latex
+
+    \clearpage
+
+IPv6 Routing
+============
 
 Following sections include Throughput Speedup Analysis for VPP multi-
 core multi-thread configurations with no Hyper-Threading, specifically
@@ -9,118 +14,15 @@ used for the graphs comes from Phy-to-Phy 78B performance tests with VPP
 IPv6 Routed-Forwarding, including NDR throughput (zero packet loss) and
 PDR throughput (<0.5% packet loss).
 
-NDR Throughput
---------------
-
-VPP NDR 78B packet throughput speedup ratio is presented in the graphs
-below for 10ge2p1x520 and 40ge2p1xl710 network interface cards.
-
-
-NIC 10ge2p1x520
-~~~~~~~~~~~~~~~
-
-.. raw:: html
-
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/10ge2p1x520-78B-ip6-tsa-ndrdisc.html"></iframe>
-
-.. raw:: latex
-
-    \begin{figure}[H]
-        \centering
-            \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{10ge2p1x520-78B-ip6-tsa-ndrdisc}
-            \label{fig:10ge2p1x520-78B-ip6-tsa-ndrdisc}
-    \end{figure}
-
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E '78B-(1t1c|2t2c|4t4c)-ethip6-ip6(base|scale[a-z0-9]*)*-ndrdisc' 10ge2p1x520*
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip6
-      $ grep -E '78B-(1t1c|2t2c|4t4c)-ethip6-ip6(base|scale[a-z0-9]*)*-ndrdisc' 10ge2p1x520*
-
-*Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
-NDR Throughput for Phy-to-Phy IPv6 Routed-Forwarding.*
-
-NIC 40ge2p1xl710
-~~~~~~~~~~~~~~~~
-
-.. raw:: html
-
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/40ge2p1xl710-78B-ip6-tsa-ndrdisc.html"></iframe>
-
-.. raw:: latex
-
-    \begin{figure}[H]
-        \centering
-            \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{40ge2p1xl710-78B-ip6-tsa-ndrdisc}
-            \label{fig:40ge2p1xl710-78B-ip6-tsa-ndrdisc}
-    \end{figure}
-
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E '78B-(1t1c|2t2c|4t4c)-ethip6-ip6(base|scale[a-z0-9]*)*-ndrdisc' 40ge2p1xl710*
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip6
-      $ grep -E '78B-(1t1c|2t2c|4t4c)-ethip6-ip6(base|scale[a-z0-9]*)*-ndrdisc' 40ge2p1xl710*
-
-*Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
-NDR Throughput for Phy-to-Phy IPv6 Routed-Forwarding.*
-
-PDR Throughput
---------------
-
-VPP PDR 78B packet throughput speedup ratio is presented in the graphs
-below for 10ge2p1x520 and 40ge2p1xl710 network interface cards. PDR
-measured for 0.5% packet loss ratio.
-
-NIC 10ge2p1x520
-~~~~~~~~~~~~~~~
-
-.. raw:: html
-
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/10ge2p1x520-78B-ip6-tsa-pdrdisc.html"></iframe>
-
-.. raw:: latex
-
-    \begin{figure}[H]
-        \centering
-            \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{10ge2p1x520-78B-ip6-tsa-pdrdisc}
-            \label{fig:10ge2p1x520-78B-ip6-tsa-pdrdisc}
-    \end{figure}
-
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E '78B-(1t1c|2t2c|4t4c)-ethip6-ip6(base|scale[a-z0-9]*)*-pdrdisc' 10ge2p1x520*
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
+CSIT source code for the test cases used for plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6?h=rls1901>`_.
 
-      $ cd tests/vpp/perf/ip6
-      $ grep -E '78B-(1t1c|2t2c|4t4c)-ethip6-ip6(base|scale[a-z0-9]*)*-pdrdisc' 10ge2p1x520*
+.. toctree::
 
-*Figure 3. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
-PDR Throughput for Phy-to-Phy IPv6 Routed-Forwarding.*
+    ip6-3n-hsw-x520
+    ip6-3n-hsw-x710
+    ip6-3n-hsw-xl710
+    ip6-3n-skx-x710
+    ip6-2n-skx-x710
+    ip6-2n-skx-xxv710
+    ip6-2n-dnv-x553