Report: Add 2n-tx2 ipsec tests

[csit.git] / docs / report / vpp_performance_tests / throughput_speedup_multi_core / ipsec.rst

diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ipsec.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ipsec.rst
index a5a4d7d..a46b7fe 100644 (file)
--- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ipsec.rst
+++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ipsec.rst
@@ -1,5 +1,10 @@
-IPSec Crypto HW: IP4 Routed-Forwarding
-======================================
+
+.. raw:: latex
+
+    \clearpage
+
+IPSec IPv4 Routing
+==================

 
 Following sections include Throughput Speedup Analysis for VPP multi-
 core multi-thread configurations with no Hyper-Threading, specifically
 
 Following sections include Throughput Speedup Analysis for VPP multi-
 core multi-thread configurations with no Hyper-Threading, specifically


@@ -11,61 +16,13 @@ Performance is reported for VPP running in multiple configurations of
 VPP worker thread(s), a.k.a. VPP data plane thread(s), and their
 physical CPU core(s) placement.
 
 VPP worker thread(s), a.k.a. VPP data plane thread(s), and their
 physical CPU core(s) placement.
 

-NDR Throughput
---------------
-
-VPP NDR 64B packet throughput speedup ratio is presented in the graphs
-below for 40ge2p1xl710 network interface card.
-
-NIC 40ge2p1xl710
-~~~~~~~~~~~~~~~~
-
-.. raw:: html
-
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/40ge2p1xl710-64B-ipsechw-tsa-ndrdisc.html"></iframe>
-
-.. raw:: latex
-
-    \begin{figure}[H]
-        \centering
-            \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{40ge2p1xl710-64B-ipsechw-tsa-ndrdisc}
-            \label{fig:40ge2p1xl710-64B-ipsechw-tsa-ndrdisc}
-    \end{figure}
-
-*Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
-NDR Throughput for Phy-to-Phy IPSEC HW.*
-
-CSIT source code for the test cases used for above plots can be found in
-`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/crypto?h=rls1804>`_.
-
-PDR Throughput
---------------
-
-VPP PDR 64B packet throughput speedup ratio is presented in the graphs
-below for 40ge2p1xl710 network interface card.
-
-NIC 40ge2p1xl710
-~~~~~~~~~~~~~~~~
-
-VPP PDR 64B packet throughput in 1t1c setup (1thread, 1core) is presented
-in the graph below. PDR measured for 0.5% packet loss ratio.
-
-.. raw:: html
-
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/40ge2p1xl710-64B-ipsechw-tsa-pdrdisc.html"></iframe>
-
-.. raw:: latex
-
-    \begin{figure}[H]
-        \centering
-            \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{40ge2p1xl710-64B-ipsechw-tsa-pdrdisc}
-            \label{fig:40ge2p1xl710-64B-ipsechw-tsa-pdrdisc}
-    \end{figure}
+CSIT source code for the test cases used for plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/crypto?h=rls2110>`_.

 
 

-*Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
-PDR Throughput for Phy-to-Phy IPSEC HW.*
+.. toctree::

 
 

-CSIT source code for the test cases used for above plots can be found in
-`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/crypto?h=rls1804>`_.
+    ipsec-3n-skx-xxv710
+    ipsec-3n-icx-e810cq
+    ipsec-3n-tsh-x520
+    ipsec-2n-tx2-xl710
+    ipsec-3n-dnv-x553