CSIT-1196: Add hsw/skx and 2n/3n to the report structure

[csit.git] / docs / report / vpp_performance_tests / throughput_speedup_multi_core / srv6.rst

diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/srv6.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/srv6.rst
index 4ece4d5..eecaaeb 100644 (file)
--- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/srv6.rst
+++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/srv6.rst
@@ -1,5 +1,5 @@
-SRv6
-====
+SRv6 Routing
+============
 
 Following sections include Throughput Speedup Analysis for VPP multi-
 core multi-thread configurations with no Hyper-Threading, specifically
@@ -9,60 +9,55 @@ used for the graphs comes from Phy-to-Phy 78B performance tests with VPP
 SRv6, including NDR throughput (zero packet loss) and
 PDR throughput (<0.5% packet loss).
 
-NDR Throughput
---------------
+CSIT source code for the test cases used for plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/srv6?h=rls1807>`_.
 
-VPP NDR 78B packet throughput speedup ratio is presented in the graphs
-below for 10ge2p1x520 network interface card.
+3n-hsw-x520
+~~~~~~~~~~~
 
+78b-features
+------------
 
-NIC 10ge2p1x520
-~~~~~~~~~~~~~~~
+.. raw:: html
+
+    <center><b>
+
+:index:`Speedup: srv6-3n-hsw-x520-78b-1t1c-features-ndr`
 
 .. raw:: html
 
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/10ge2p1x520-78B-srv6-tsa-ndrdisc.html"></iframe>
+    </b>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/srv6-3n-hsw-x520-78b-features-ndr-tsa.html"></iframe>
+    <p><br><br></p>
+    </center>
 
 .. raw:: latex
 
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{10ge2p1x520-78B-srv6-tsa-ndrdisc}
-            \label{fig:10ge2p1x520-78B-srv6-tsa-ndrdisc}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{srv6-3n-hsw-x520-78b-features-ndr-tsa}
+            \label{fig:srv6-3n-hsw-x520-78b-features-ndr-tsa}
     \end{figure}
 
-*Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
-NDR Throughput for Phy-to-Phy SRv6.*
-
-CSIT source code for the test cases used for above plots can be found in
-`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/srv6?h=rls1804>`_.
-
-PDR Throughput
---------------
+.. raw:: html
 
-VPP PDR 78B packet throughput speedup ratio is presented in the graphs
-below for 10ge2p1x520 network interface card. PDR
-measured for 0.5% packet loss ratio.
+    <center><b>
 
-NIC 10ge2p1x520
-~~~~~~~~~~~~~~~
+:index:`Speedup: srv6-3n-hsw-x520-78b-1t1c-features-pdr`
 
 .. raw:: html
 
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/10ge2p1x520-78B-srv6-tsa-pdrdisc.html"></iframe>
+    </b>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/srv6-3n-hsw-x520-78b-features-pdr-tsa.html"></iframe>
+    <p><br><br></p>
+    </center>
 
 .. raw:: latex
 
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{10ge2p1x520-78B-srv6-tsa-pdrdisc}
-            \label{fig:10ge2p1x520-78B-srv6-tsa-pdrdisc}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{srv6-3n-hsw-x520-78b-features-pdr-tsa}
+            \label{fig:srv6-3n-hsw-x520-78b-features-pdr-tsa}
     \end{figure}
-
-*Figure 3. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
-PDR Throughput for Phy-to-Phy SRv6.*
-
-CSIT source code for the test cases used for above plots can be found in
-`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/srv6?h=rls1804>`_.