{
"version": 4,
- "terraform_version": "0.14.7",
- "serial": 1151,
+ "terraform_version": "0.15.3",
+ "serial": 1165,
"lineage": "e4e7f30a-652d-7a31-e31c-5e3a3388c9b9",
"outputs": {},
"resources": [
"schema_version": 0,
"attributes": {
"filename": null,
- "id": "8c7fa4839d8fc8226429af90d58f57181bff6e0ae5a4be5605d309029c99348a",
- "rendered": "job \"prod-alertmanager\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-alertmanager\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-alertmanager\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"exec\"\n\n \n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n command = \"local/alertmanager-0.21.0.linux-amd64/alertmanager\"\n args = [\n \"--config.file=secrets/alertmanager.yml\"\n ]\n }\n\n # The artifact stanza instructs Nomad to fetch and unpack a remote resource,\n # such as a file, tarball, or binary. Nomad downloads artifacts using the\n # popular go-getter library, which permits downloading artifacts from a\n # variety of locations using a URL as the input source.\n #\n # For more information and examples on the \"artifact\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/artifact\n #\n artifact {\n source = \"https://github.com/prometheus/alertmanager/releases/download/v0.21.0/alertmanager-0.21.0.linux-amd64.tar.gz\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/alertmanager.yml\"\n left_delimiter = \"{{{\"\n right_delimiter = \"}}}\"\n data = \u003c\u003cEOH\n# The directory from which notification templates are read.\ntemplates:\n- '/etc/alertmanager/template/*.tmpl'\n\n#tls_config:\n# # CA certificate to validate the server certificate with.\n# ca_file: \u003cfilepath\u003e ]\n#\n# # Certificate and key files for client cert authentication to the server.\n# cert_file: \u003cfilepath\u003e\n# key_file: \u003cfilepath\u003e\n#\n# # ServerName extension to indicate the name of the server.\n# # http://tools.ietf.org/html/rfc4366#section-3.1\n# server_name: \u003cstring\u003e\n#\n# # Disable validation of the server certificate.\n# insecure_skip_verify: true\n\n# The root route on which each incoming alert enters.\nroute:\n receiver: 'default-slack-receiver'\n\n # The labels by which incoming alerts are grouped together. For example,\n # multiple alerts coming in for cluster=A and alertname=LatencyHigh would\n # be batched into a single group.\n #\n # To aggregate by all possible labels use '...' as the sole label name.\n # This effectively disables aggregation entirely, passing through all\n # alerts as-is. This is unlikely to be what you want, unless you have\n # a very low alert volume or your upstream notification system performs\n # its own grouping. Example: group_by: [...]\n group_by: ['alertname']\n\n # When a new group of alerts is created by an incoming alert, wait at\n # least 'group_wait' to send the initial notification.\n # This way ensures that you get multiple alerts for the same group that start\n # firing shortly after another are batched together on the first\n # notification.\n group_wait: 30s\n\n # When the first notification was sent, wait 'group_interval' to send a batch\n # of new alerts that started firing for that group.\n group_interval: 5m\n\n # If an alert has successfully been sent, wait 'repeat_interval' to\n # resend them.\n repeat_interval: 3h\n\n # All the above attributes are inherited by all child routes and can\n # overwritten on each.\n # The child route trees.\n routes:\n - match_re:\n alertname: JenkinsJob.*\n receiver: jenkins-slack-receiver\n routes:\n - match:\n severity: critical\n receiver: 'jenkins-slack-receiver'\n\n - match_re:\n service: .*\n receiver: default-slack-receiver\n routes:\n - match:\n severity: critical\n receiver: 'default-slack-receiver'\n\n# Inhibition rules allow to mute a set of alerts given that another alert is\n# firing.\n# We use this to mute any warning-level notifications if the same alert is\n# already critical.\ninhibit_rules:\n- source_match:\n severity: 'critical'\n target_match:\n severity: 'warning'\n equal: ['alertname', 'instance']\n\nreceivers:\n- name: 'jenkins-slack-receiver'\n slack_configs:\n - api_url: '/TE07RD1V1/B01LPL8KM0F/KAd80wc9vS8CPMtrNtmQqCfT'\n channel: '#fdio-jobs-monitoring'\n send_resolved: true\n icon_url: https://avatars3.githubusercontent.com/u/3380462\n title: |-\n [{{ .Status | toUpper }}{{ if eq .Status \"firing\" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}\n {{- if gt (len .CommonLabels) (len .GroupLabels) -}}\n {{\" \"}}(\n {{- with .CommonLabels.Remove .GroupLabels.Names }}\n {{- range $index, $label := .SortedPairs -}}\n {{ if $index }}, {{ end }}\n {{- $label.Name }}=\"{{ $label.Value -}}\"\n {{- end }}\n {{- end -}}\n )\n {{- end }}\n text: \u003e-\n {{ range .Alerts -}}\n *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}\n\n *Description:* {{ .Annotations.description }}\n\n *Details:*\n {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`\n {{ end }}\n {{ end }}\n\n- name: 'default-slack-receiver'\n slack_configs:\n - api_url: '/TE07RD1V1/B01L7PQK9S8/vJTSCr3OUprfAEGKBV5uZoJ6'\n channel: '#fdio-infra-monitoring'\n send_resolved: true\n icon_url: https://avatars3.githubusercontent.com/u/3380462\n title: |-\n [{{ .Status | toUpper }}{{ if eq .Status \"firing\" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}\n {{- if gt (len .CommonLabels) (len .GroupLabels) -}}\n {{\" \"}}(\n {{- with .CommonLabels.Remove .GroupLabels.Names }}\n {{- range $index, $label := .SortedPairs -}}\n {{ if $index }}, {{ end }}\n {{- $label.Name }}=\"{{ $label.Value -}}\"\n {{- end }}\n {{- end -}}\n )\n {{- end }}\n text: \u003e-\n {{ range .Alerts -}}\n *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}\n\n *Description:* {{ .Annotations.description }}\n\n *Details:*\n {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`\n {{ end }}\n {{ end }}\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"alertmanager\"\n port = \"alertmanager\"\n tags = [ \"alertmanager${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Alertmanager Check Live\"\n type = \"http\"\n path = \"/-/healthy\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = 1000\n memory = 1024\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"alertmanager\" {\n static = 9093\n }\n }\n }\n }\n }\n}",
- "template": "job \"${job_name}\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"${datacenters}\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n%{ if use_canary }\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n%{ endif }\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-${service_name}\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = ${group_count}\n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"$${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-${service_name}\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"exec\"\n\n %{ if use_vault_provider }\n vault {\n policies = \"${vault_kv_policy_name}\"\n }\n %{ endif }\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n command = \"local/alertmanager-${version}.linux-amd64/alertmanager\"\n args = [\n \"--config.file=secrets/alertmanager.yml\"\n ]\n }\n\n # The artifact stanza instructs Nomad to fetch and unpack a remote resource,\n # such as a file, tarball, or binary. Nomad downloads artifacts using the\n # popular go-getter library, which permits downloading artifacts from a\n # variety of locations using a URL as the input source.\n #\n # For more information and examples on the \"artifact\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/artifact\n #\n artifact {\n source = \"${url}\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/alertmanager.yml\"\n left_delimiter = \"{{{\"\n right_delimiter = \"}}}\"\n data = \u003c\u003cEOH\n# The directory from which notification templates are read.\ntemplates:\n- '/etc/alertmanager/template/*.tmpl'\n\n#tls_config:\n# # CA certificate to validate the server certificate with.\n# ca_file: \u003cfilepath\u003e ]\n#\n# # Certificate and key files for client cert authentication to the server.\n# cert_file: \u003cfilepath\u003e\n# key_file: \u003cfilepath\u003e\n#\n# # ServerName extension to indicate the name of the server.\n# # http://tools.ietf.org/html/rfc4366#section-3.1\n# server_name: \u003cstring\u003e\n#\n# # Disable validation of the server certificate.\n# insecure_skip_verify: true\n\n# The root route on which each incoming alert enters.\nroute:\n receiver: '${slack_default_receiver}'\n\n # The labels by which incoming alerts are grouped together. For example,\n # multiple alerts coming in for cluster=A and alertname=LatencyHigh would\n # be batched into a single group.\n #\n # To aggregate by all possible labels use '...' as the sole label name.\n # This effectively disables aggregation entirely, passing through all\n # alerts as-is. This is unlikely to be what you want, unless you have\n # a very low alert volume or your upstream notification system performs\n # its own grouping. Example: group_by: [...]\n group_by: ['alertname']\n\n # When a new group of alerts is created by an incoming alert, wait at\n # least 'group_wait' to send the initial notification.\n # This way ensures that you get multiple alerts for the same group that start\n # firing shortly after another are batched together on the first\n # notification.\n group_wait: 30s\n\n # When the first notification was sent, wait 'group_interval' to send a batch\n # of new alerts that started firing for that group.\n group_interval: 5m\n\n # If an alert has successfully been sent, wait 'repeat_interval' to\n # resend them.\n repeat_interval: 3h\n\n # All the above attributes are inherited by all child routes and can\n # overwritten on each.\n # The child route trees.\n routes:\n - match_re:\n alertname: JenkinsJob.*\n receiver: ${slack_jenkins_receiver}\n routes:\n - match:\n severity: critical\n receiver: '${slack_jenkins_receiver}'\n\n - match_re:\n service: .*\n receiver: ${slack_default_receiver}\n routes:\n - match:\n severity: critical\n receiver: '${slack_default_receiver}'\n\n# Inhibition rules allow to mute a set of alerts given that another alert is\n# firing.\n# We use this to mute any warning-level notifications if the same alert is\n# already critical.\ninhibit_rules:\n- source_match:\n severity: 'critical'\n target_match:\n severity: 'warning'\n equal: ['alertname', 'instance']\n\nreceivers:\n- name: '${slack_jenkins_receiver}'\n slack_configs:\n - api_url: '/${slack_jenkins_api_key}'\n channel: '#${slack_jenkins_channel}'\n send_resolved: true\n icon_url: https://avatars3.githubusercontent.com/u/3380462\n title: |-\n [{{ .Status | toUpper }}{{ if eq .Status \"firing\" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}\n {{- if gt (len .CommonLabels) (len .GroupLabels) -}}\n {{\" \"}}(\n {{- with .CommonLabels.Remove .GroupLabels.Names }}\n {{- range $index, $label := .SortedPairs -}}\n {{ if $index }}, {{ end }}\n {{- $label.Name }}=\"{{ $label.Value -}}\"\n {{- end }}\n {{- end -}}\n )\n {{- end }}\n text: \u003e-\n {{ range .Alerts -}}\n *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}\n\n *Description:* {{ .Annotations.description }}\n\n *Details:*\n {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`\n {{ end }}\n {{ end }}\n\n- name: '${slack_default_receiver}'\n slack_configs:\n - api_url: '/${slack_default_api_key}'\n channel: '#${slack_default_channel}'\n send_resolved: true\n icon_url: https://avatars3.githubusercontent.com/u/3380462\n title: |-\n [{{ .Status | toUpper }}{{ if eq .Status \"firing\" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}\n {{- if gt (len .CommonLabels) (len .GroupLabels) -}}\n {{\" \"}}(\n {{- with .CommonLabels.Remove .GroupLabels.Names }}\n {{- range $index, $label := .SortedPairs -}}\n {{ if $index }}, {{ end }}\n {{- $label.Name }}=\"{{ $label.Value -}}\"\n {{- end }}\n {{- end -}}\n )\n {{- end }}\n text: \u003e-\n {{ range .Alerts -}}\n *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}\n\n *Description:* {{ .Annotations.description }}\n\n *Details:*\n {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`\n {{ end }}\n {{ end }}\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"${service_name}\"\n port = \"${service_name}\"\n tags = [ \"${service_name}$${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Alertmanager Check Live\"\n type = \"http\"\n path = \"/-/healthy\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = ${cpu}\n memory = ${mem}\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"${service_name}\" {\n static = ${port}\n }\n }\n }\n }\n }\n}",
+ "id": "7e96dc4e316a25b07430e5ffc2ecdb94ae41f06770ba8667ae4d5f77ef25c6f7",
+ "rendered": "job \"prod-alertmanager\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n\n }\n\n # The reschedule stanza specifies the group's rescheduling strategy. If\n # specified at the job level, the configuration will apply to all groups\n # within the job. If the reschedule stanza is present on both the job and the\n # group, they are merged with the group stanza taking the highest precedence\n # and then the job.\n reschedule {\n delay = \"30s\"\n delay_function = \"constant\"\n unlimited = true\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-alertmanager\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n # The restart stanza configures a tasks's behavior on task failure. Restarts\n # happen on the client that is running the task.\n #\n # https://www.nomadproject.io/docs/job-specification/restart\n #\n restart {\n interval = \"30m\"\n attempts = 40\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-alertmanager\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"exec\"\n\n \n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n command = \"local/alertmanager-0.21.0.linux-amd64/alertmanager\"\n args = [\n \"--config.file=secrets/alertmanager.yml\"\n ]\n }\n\n # The artifact stanza instructs Nomad to fetch and unpack a remote resource,\n # such as a file, tarball, or binary. Nomad downloads artifacts using the\n # popular go-getter library, which permits downloading artifacts from a\n # variety of locations using a URL as the input source.\n #\n # For more information and examples on the \"artifact\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/artifact\n #\n artifact {\n source = \"https://github.com/prometheus/alertmanager/releases/download/v0.21.0/alertmanager-0.21.0.linux-amd64.tar.gz\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/alertmanager.yml\"\n left_delimiter = \"{{{\"\n right_delimiter = \"}}}\"\n data = \u003c\u003cEOH\n# The directory from which notification templates are read.\ntemplates:\n- '/etc/alertmanager/template/*.tmpl'\n\n#tls_config:\n# # CA certificate to validate the server certificate with.\n# ca_file: \u003cfilepath\u003e ]\n#\n# # Certificate and key files for client cert authentication to the server.\n# cert_file: \u003cfilepath\u003e\n# key_file: \u003cfilepath\u003e\n#\n# # ServerName extension to indicate the name of the server.\n# # http://tools.ietf.org/html/rfc4366#section-3.1\n# server_name: \u003cstring\u003e\n#\n# # Disable validation of the server certificate.\n# insecure_skip_verify: true\n\n# The root route on which each incoming alert enters.\nroute:\n receiver: 'default-slack-receiver'\n\n # The labels by which incoming alerts are grouped together. For example,\n # multiple alerts coming in for cluster=A and alertname=LatencyHigh would\n # be batched into a single group.\n #\n # To aggregate by all possible labels use '...' as the sole label name.\n # This effectively disables aggregation entirely, passing through all\n # alerts as-is. This is unlikely to be what you want, unless you have\n # a very low alert volume or your upstream notification system performs\n # its own grouping. Example: group_by: [...]\n group_by: ['alertname']\n\n # When a new group of alerts is created by an incoming alert, wait at\n # least 'group_wait' to send the initial notification.\n # This way ensures that you get multiple alerts for the same group that start\n # firing shortly after another are batched together on the first\n # notification.\n group_wait: 30s\n\n # When the first notification was sent, wait 'group_interval' to send a batch\n # of new alerts that started firing for that group.\n group_interval: 5m\n\n # If an alert has successfully been sent, wait 'repeat_interval' to\n # resend them.\n repeat_interval: 3h\n\n # All the above attributes are inherited by all child routes and can\n # overwritten on each.\n # The child route trees.\n routes:\n - match_re:\n alertname: JenkinsJob.*\n receiver: jenkins-slack-receiver\n routes:\n - match:\n severity: critical\n receiver: 'jenkins-slack-receiver'\n\n - match_re:\n service: .*\n receiver: default-slack-receiver\n routes:\n - match:\n severity: critical\n receiver: 'default-slack-receiver'\n\n# Inhibition rules allow to mute a set of alerts given that another alert is\n# firing.\n# We use this to mute any warning-level notifications if the same alert is\n# already critical.\ninhibit_rules:\n- source_match:\n severity: 'critical'\n target_match:\n severity: 'warning'\n equal: ['alertname', 'instance']\n\nreceivers:\n- name: 'jenkins-slack-receiver'\n slack_configs:\n - api_url: 'TE07RD1V1/B01U1NV9HV3/hKZXJJ74g2JcISq4K3QC1eG9'\n channel: '#fdio-jobs-monitoring'\n send_resolved: true\n icon_url: https://avatars3.githubusercontent.com/u/3380462\n title: |-\n [{{ .Status | toUpper }}{{ if eq .Status \"firing\" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}\n {{- if gt (len .CommonLabels) (len .GroupLabels) -}}\n {{\" \"}}(\n {{- with .CommonLabels.Remove .GroupLabels.Names }}\n {{- range $index, $label := .SortedPairs -}}\n {{ if $index }}, {{ end }}\n {{- $label.Name }}=\"{{ $label.Value -}}\"\n {{- end }}\n {{- end -}}\n )\n {{- end }}\n text: \u003e-\n {{ range .Alerts -}}\n *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}\n\n *Description:* {{ .Annotations.description }}\n\n *Details:*\n {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`\n {{ end }}\n {{ end }}\n\n- name: 'default-slack-receiver'\n slack_configs:\n - api_url: 'TE07RD1V1/B01UUK23B6C/hZTcCu42FUv8d6rtirHtcYIi'\n channel: '#fdio-infra-monitoring'\n send_resolved: true\n icon_url: https://avatars3.githubusercontent.com/u/3380462\n title: |-\n [{{ .Status | toUpper }}{{ if eq .Status \"firing\" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}\n {{- if gt (len .CommonLabels) (len .GroupLabels) -}}\n {{\" \"}}(\n {{- with .CommonLabels.Remove .GroupLabels.Names }}\n {{- range $index, $label := .SortedPairs -}}\n {{ if $index }}, {{ end }}\n {{- $label.Name }}=\"{{ $label.Value -}}\"\n {{- end }}\n {{- end -}}\n )\n {{- end }}\n text: \u003e-\n {{ range .Alerts -}}\n *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}\n\n *Description:* {{ .Annotations.description }}\n\n *Details:*\n {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`\n {{ end }}\n {{ end }}\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"alertmanager\"\n port = \"alertmanager\"\n tags = [ \"alertmanager${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Alertmanager Check Live\"\n type = \"http\"\n path = \"/-/healthy\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = 1000\n memory = 1024\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"alertmanager\" {\n static = 9093\n }\n }\n }\n }\n }\n}",
+ "template": "job \"${job_name}\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"${datacenters}\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n%{ if use_canary }\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n%{ endif }\n }\n\n # The reschedule stanza specifies the group's rescheduling strategy. If\n # specified at the job level, the configuration will apply to all groups\n # within the job. If the reschedule stanza is present on both the job and the\n # group, they are merged with the group stanza taking the highest precedence\n # and then the job.\n reschedule {\n delay = \"30s\"\n delay_function = \"constant\"\n unlimited = true\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-${service_name}\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = ${group_count}\n\n # The restart stanza configures a tasks's behavior on task failure. Restarts\n # happen on the client that is running the task.\n #\n # https://www.nomadproject.io/docs/job-specification/restart\n #\n restart {\n interval = \"30m\"\n attempts = 40\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"$${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-${service_name}\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"exec\"\n\n %{ if use_vault_provider }\n vault {\n policies = \"${vault_kv_policy_name}\"\n }\n %{ endif }\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n command = \"local/alertmanager-${version}.linux-amd64/alertmanager\"\n args = [\n \"--config.file=secrets/alertmanager.yml\"\n ]\n }\n\n # The artifact stanza instructs Nomad to fetch and unpack a remote resource,\n # such as a file, tarball, or binary. Nomad downloads artifacts using the\n # popular go-getter library, which permits downloading artifacts from a\n # variety of locations using a URL as the input source.\n #\n # For more information and examples on the \"artifact\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/artifact\n #\n artifact {\n source = \"${url}\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/alertmanager.yml\"\n left_delimiter = \"{{{\"\n right_delimiter = \"}}}\"\n data = \u003c\u003cEOH\n# The directory from which notification templates are read.\ntemplates:\n- '/etc/alertmanager/template/*.tmpl'\n\n#tls_config:\n# # CA certificate to validate the server certificate with.\n# ca_file: \u003cfilepath\u003e ]\n#\n# # Certificate and key files for client cert authentication to the server.\n# cert_file: \u003cfilepath\u003e\n# key_file: \u003cfilepath\u003e\n#\n# # ServerName extension to indicate the name of the server.\n# # http://tools.ietf.org/html/rfc4366#section-3.1\n# server_name: \u003cstring\u003e\n#\n# # Disable validation of the server certificate.\n# insecure_skip_verify: true\n\n# The root route on which each incoming alert enters.\nroute:\n receiver: '${slack_default_receiver}'\n\n # The labels by which incoming alerts are grouped together. For example,\n # multiple alerts coming in for cluster=A and alertname=LatencyHigh would\n # be batched into a single group.\n #\n # To aggregate by all possible labels use '...' as the sole label name.\n # This effectively disables aggregation entirely, passing through all\n # alerts as-is. This is unlikely to be what you want, unless you have\n # a very low alert volume or your upstream notification system performs\n # its own grouping. Example: group_by: [...]\n group_by: ['alertname']\n\n # When a new group of alerts is created by an incoming alert, wait at\n # least 'group_wait' to send the initial notification.\n # This way ensures that you get multiple alerts for the same group that start\n # firing shortly after another are batched together on the first\n # notification.\n group_wait: 30s\n\n # When the first notification was sent, wait 'group_interval' to send a batch\n # of new alerts that started firing for that group.\n group_interval: 5m\n\n # If an alert has successfully been sent, wait 'repeat_interval' to\n # resend them.\n repeat_interval: 3h\n\n # All the above attributes are inherited by all child routes and can\n # overwritten on each.\n # The child route trees.\n routes:\n - match_re:\n alertname: JenkinsJob.*\n receiver: ${slack_jenkins_receiver}\n routes:\n - match:\n severity: critical\n receiver: '${slack_jenkins_receiver}'\n\n - match_re:\n service: .*\n receiver: ${slack_default_receiver}\n routes:\n - match:\n severity: critical\n receiver: '${slack_default_receiver}'\n\n# Inhibition rules allow to mute a set of alerts given that another alert is\n# firing.\n# We use this to mute any warning-level notifications if the same alert is\n# already critical.\ninhibit_rules:\n- source_match:\n severity: 'critical'\n target_match:\n severity: 'warning'\n equal: ['alertname', 'instance']\n\nreceivers:\n- name: '${slack_jenkins_receiver}'\n slack_configs:\n - api_url: '${slack_jenkins_api_key}'\n channel: '#${slack_jenkins_channel}'\n send_resolved: true\n icon_url: https://avatars3.githubusercontent.com/u/3380462\n title: |-\n [{{ .Status | toUpper }}{{ if eq .Status \"firing\" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}\n {{- if gt (len .CommonLabels) (len .GroupLabels) -}}\n {{\" \"}}(\n {{- with .CommonLabels.Remove .GroupLabels.Names }}\n {{- range $index, $label := .SortedPairs -}}\n {{ if $index }}, {{ end }}\n {{- $label.Name }}=\"{{ $label.Value -}}\"\n {{- end }}\n {{- end -}}\n )\n {{- end }}\n text: \u003e-\n {{ range .Alerts -}}\n *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}\n\n *Description:* {{ .Annotations.description }}\n\n *Details:*\n {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`\n {{ end }}\n {{ end }}\n\n- name: '${slack_default_receiver}'\n slack_configs:\n - api_url: '${slack_default_api_key}'\n channel: '#${slack_default_channel}'\n send_resolved: true\n icon_url: https://avatars3.githubusercontent.com/u/3380462\n title: |-\n [{{ .Status | toUpper }}{{ if eq .Status \"firing\" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}\n {{- if gt (len .CommonLabels) (len .GroupLabels) -}}\n {{\" \"}}(\n {{- with .CommonLabels.Remove .GroupLabels.Names }}\n {{- range $index, $label := .SortedPairs -}}\n {{ if $index }}, {{ end }}\n {{- $label.Name }}=\"{{ $label.Value -}}\"\n {{- end }}\n {{- end -}}\n )\n {{- end }}\n text: \u003e-\n {{ range .Alerts -}}\n *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}\n\n *Description:* {{ .Annotations.description }}\n\n *Details:*\n {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`\n {{ end }}\n {{ end }}\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"${service_name}\"\n port = \"${service_name}\"\n tags = [ \"${service_name}$${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Alertmanager Check Live\"\n type = \"http\"\n path = \"/-/healthy\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = ${cpu}\n memory = ${mem}\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"${service_name}\" {\n static = ${port}\n }\n }\n }\n }\n }\n}",
"vars": {
"cpu": "1000",
"datacenters": "yul1",
"mem": "1024",
"port": "9093",
"service_name": "alertmanager",
- "slack_default_api_key": "TE07RD1V1/B01L7PQK9S8/vJTSCr3OUprfAEGKBV5uZoJ6",
+ "slack_default_api_key": "TE07RD1V1/B01UUK23B6C/hZTcCu42FUv8d6rtirHtcYIi",
"slack_default_channel": "fdio-infra-monitoring",
"slack_default_receiver": "default-slack-receiver",
- "slack_jenkins_api_key": "TE07RD1V1/B01LPL8KM0F/KAd80wc9vS8CPMtrNtmQqCfT",
+ "slack_jenkins_api_key": "TE07RD1V1/B01U1NV9HV3/hKZXJJ74g2JcISq4K3QC1eG9",
"slack_jenkins_channel": "fdio-jobs-monitoring",
"slack_jenkins_receiver": "jenkins-slack-receiver",
"url": "https://github.com/prometheus/alertmanager/releases/download/v0.21.0/alertmanager-0.21.0.linux-amd64.tar.gz",
"schema_version": 0,
"attributes": {
"allocation_ids": [
- "0fafbccb-8855-e1e6-dc14-caa45e611a72"
+ "778f4f9d-dea8-e5bd-c9cf-f7a7e2d3a24e",
+ "644eb7b6-268c-4b0f-ba49-e3f7d2582298"
],
"datacenters": [
"yul1"
],
- "deployment_id": "cb6a97c2-e428-bc0c-01ff-36d25c83de63",
+ "deployment_id": "1cd42f80-d43d-96cf-bce9-c1f77872e48b",
"deployment_status": "successful",
"deregister_on_destroy": true,
"deregister_on_id_change": true,
"detach": false,
"id": "prod-alertmanager",
- "jobspec": "job \"prod-alertmanager\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-alertmanager\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-alertmanager\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"exec\"\n\n \n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n command = \"local/alertmanager-0.21.0.linux-amd64/alertmanager\"\n args = [\n \"--config.file=secrets/alertmanager.yml\"\n ]\n }\n\n # The artifact stanza instructs Nomad to fetch and unpack a remote resource,\n # such as a file, tarball, or binary. Nomad downloads artifacts using the\n # popular go-getter library, which permits downloading artifacts from a\n # variety of locations using a URL as the input source.\n #\n # For more information and examples on the \"artifact\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/artifact\n #\n artifact {\n source = \"https://github.com/prometheus/alertmanager/releases/download/v0.21.0/alertmanager-0.21.0.linux-amd64.tar.gz\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/alertmanager.yml\"\n left_delimiter = \"{{{\"\n right_delimiter = \"}}}\"\n data = \u003c\u003cEOH\n# The directory from which notification templates are read.\ntemplates:\n- '/etc/alertmanager/template/*.tmpl'\n\n#tls_config:\n# # CA certificate to validate the server certificate with.\n# ca_file: \u003cfilepath\u003e ]\n#\n# # Certificate and key files for client cert authentication to the server.\n# cert_file: \u003cfilepath\u003e\n# key_file: \u003cfilepath\u003e\n#\n# # ServerName extension to indicate the name of the server.\n# # http://tools.ietf.org/html/rfc4366#section-3.1\n# server_name: \u003cstring\u003e\n#\n# # Disable validation of the server certificate.\n# insecure_skip_verify: true\n\n# The root route on which each incoming alert enters.\nroute:\n receiver: 'default-slack-receiver'\n\n # The labels by which incoming alerts are grouped together. For example,\n # multiple alerts coming in for cluster=A and alertname=LatencyHigh would\n # be batched into a single group.\n #\n # To aggregate by all possible labels use '...' as the sole label name.\n # This effectively disables aggregation entirely, passing through all\n # alerts as-is. This is unlikely to be what you want, unless you have\n # a very low alert volume or your upstream notification system performs\n # its own grouping. Example: group_by: [...]\n group_by: ['alertname']\n\n # When a new group of alerts is created by an incoming alert, wait at\n # least 'group_wait' to send the initial notification.\n # This way ensures that you get multiple alerts for the same group that start\n # firing shortly after another are batched together on the first\n # notification.\n group_wait: 30s\n\n # When the first notification was sent, wait 'group_interval' to send a batch\n # of new alerts that started firing for that group.\n group_interval: 5m\n\n # If an alert has successfully been sent, wait 'repeat_interval' to\n # resend them.\n repeat_interval: 3h\n\n # All the above attributes are inherited by all child routes and can\n # overwritten on each.\n # The child route trees.\n routes:\n - match_re:\n alertname: JenkinsJob.*\n receiver: jenkins-slack-receiver\n routes:\n - match:\n severity: critical\n receiver: 'jenkins-slack-receiver'\n\n - match_re:\n service: .*\n receiver: default-slack-receiver\n routes:\n - match:\n severity: critical\n receiver: 'default-slack-receiver'\n\n# Inhibition rules allow to mute a set of alerts given that another alert is\n# firing.\n# We use this to mute any warning-level notifications if the same alert is\n# already critical.\ninhibit_rules:\n- source_match:\n severity: 'critical'\n target_match:\n severity: 'warning'\n equal: ['alertname', 'instance']\n\nreceivers:\n- name: 'jenkins-slack-receiver'\n slack_configs:\n - api_url: '/TE07RD1V1/B01LPL8KM0F/KAd80wc9vS8CPMtrNtmQqCfT'\n channel: '#fdio-jobs-monitoring'\n send_resolved: true\n icon_url: https://avatars3.githubusercontent.com/u/3380462\n title: |-\n [{{ .Status | toUpper }}{{ if eq .Status \"firing\" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}\n {{- if gt (len .CommonLabels) (len .GroupLabels) -}}\n {{\" \"}}(\n {{- with .CommonLabels.Remove .GroupLabels.Names }}\n {{- range $index, $label := .SortedPairs -}}\n {{ if $index }}, {{ end }}\n {{- $label.Name }}=\"{{ $label.Value -}}\"\n {{- end }}\n {{- end -}}\n )\n {{- end }}\n text: \u003e-\n {{ range .Alerts -}}\n *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}\n\n *Description:* {{ .Annotations.description }}\n\n *Details:*\n {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`\n {{ end }}\n {{ end }}\n\n- name: 'default-slack-receiver'\n slack_configs:\n - api_url: '/TE07RD1V1/B01L7PQK9S8/vJTSCr3OUprfAEGKBV5uZoJ6'\n channel: '#fdio-infra-monitoring'\n send_resolved: true\n icon_url: https://avatars3.githubusercontent.com/u/3380462\n title: |-\n [{{ .Status | toUpper }}{{ if eq .Status \"firing\" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}\n {{- if gt (len .CommonLabels) (len .GroupLabels) -}}\n {{\" \"}}(\n {{- with .CommonLabels.Remove .GroupLabels.Names }}\n {{- range $index, $label := .SortedPairs -}}\n {{ if $index }}, {{ end }}\n {{- $label.Name }}=\"{{ $label.Value -}}\"\n {{- end }}\n {{- end -}}\n )\n {{- end }}\n text: \u003e-\n {{ range .Alerts -}}\n *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}\n\n *Description:* {{ .Annotations.description }}\n\n *Details:*\n {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`\n {{ end }}\n {{ end }}\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"alertmanager\"\n port = \"alertmanager\"\n tags = [ \"alertmanager${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Alertmanager Check Live\"\n type = \"http\"\n path = \"/-/healthy\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = 1000\n memory = 1024\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"alertmanager\" {\n static = 9093\n }\n }\n }\n }\n }\n}",
+ "jobspec": "job \"prod-alertmanager\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n\n }\n\n # The reschedule stanza specifies the group's rescheduling strategy. If\n # specified at the job level, the configuration will apply to all groups\n # within the job. If the reschedule stanza is present on both the job and the\n # group, they are merged with the group stanza taking the highest precedence\n # and then the job.\n reschedule {\n delay = \"30s\"\n delay_function = \"constant\"\n unlimited = true\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-alertmanager\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n # The restart stanza configures a tasks's behavior on task failure. Restarts\n # happen on the client that is running the task.\n #\n # https://www.nomadproject.io/docs/job-specification/restart\n #\n restart {\n interval = \"30m\"\n attempts = 40\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-alertmanager\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"exec\"\n\n \n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n command = \"local/alertmanager-0.21.0.linux-amd64/alertmanager\"\n args = [\n \"--config.file=secrets/alertmanager.yml\"\n ]\n }\n\n # The artifact stanza instructs Nomad to fetch and unpack a remote resource,\n # such as a file, tarball, or binary. Nomad downloads artifacts using the\n # popular go-getter library, which permits downloading artifacts from a\n # variety of locations using a URL as the input source.\n #\n # For more information and examples on the \"artifact\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/artifact\n #\n artifact {\n source = \"https://github.com/prometheus/alertmanager/releases/download/v0.21.0/alertmanager-0.21.0.linux-amd64.tar.gz\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/alertmanager.yml\"\n left_delimiter = \"{{{\"\n right_delimiter = \"}}}\"\n data = \u003c\u003cEOH\n# The directory from which notification templates are read.\ntemplates:\n- '/etc/alertmanager/template/*.tmpl'\n\n#tls_config:\n# # CA certificate to validate the server certificate with.\n# ca_file: \u003cfilepath\u003e ]\n#\n# # Certificate and key files for client cert authentication to the server.\n# cert_file: \u003cfilepath\u003e\n# key_file: \u003cfilepath\u003e\n#\n# # ServerName extension to indicate the name of the server.\n# # http://tools.ietf.org/html/rfc4366#section-3.1\n# server_name: \u003cstring\u003e\n#\n# # Disable validation of the server certificate.\n# insecure_skip_verify: true\n\n# The root route on which each incoming alert enters.\nroute:\n receiver: 'default-slack-receiver'\n\n # The labels by which incoming alerts are grouped together. For example,\n # multiple alerts coming in for cluster=A and alertname=LatencyHigh would\n # be batched into a single group.\n #\n # To aggregate by all possible labels use '...' as the sole label name.\n # This effectively disables aggregation entirely, passing through all\n # alerts as-is. This is unlikely to be what you want, unless you have\n # a very low alert volume or your upstream notification system performs\n # its own grouping. Example: group_by: [...]\n group_by: ['alertname']\n\n # When a new group of alerts is created by an incoming alert, wait at\n # least 'group_wait' to send the initial notification.\n # This way ensures that you get multiple alerts for the same group that start\n # firing shortly after another are batched together on the first\n # notification.\n group_wait: 30s\n\n # When the first notification was sent, wait 'group_interval' to send a batch\n # of new alerts that started firing for that group.\n group_interval: 5m\n\n # If an alert has successfully been sent, wait 'repeat_interval' to\n # resend them.\n repeat_interval: 3h\n\n # All the above attributes are inherited by all child routes and can\n # overwritten on each.\n # The child route trees.\n routes:\n - match_re:\n alertname: JenkinsJob.*\n receiver: jenkins-slack-receiver\n routes:\n - match:\n severity: critical\n receiver: 'jenkins-slack-receiver'\n\n - match_re:\n service: .*\n receiver: default-slack-receiver\n routes:\n - match:\n severity: critical\n receiver: 'default-slack-receiver'\n\n# Inhibition rules allow to mute a set of alerts given that another alert is\n# firing.\n# We use this to mute any warning-level notifications if the same alert is\n# already critical.\ninhibit_rules:\n- source_match:\n severity: 'critical'\n target_match:\n severity: 'warning'\n equal: ['alertname', 'instance']\n\nreceivers:\n- name: 'jenkins-slack-receiver'\n slack_configs:\n - api_url: 'TE07RD1V1/B01U1NV9HV3/hKZXJJ74g2JcISq4K3QC1eG9'\n channel: '#fdio-jobs-monitoring'\n send_resolved: true\n icon_url: https://avatars3.githubusercontent.com/u/3380462\n title: |-\n [{{ .Status | toUpper }}{{ if eq .Status \"firing\" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}\n {{- if gt (len .CommonLabels) (len .GroupLabels) -}}\n {{\" \"}}(\n {{- with .CommonLabels.Remove .GroupLabels.Names }}\n {{- range $index, $label := .SortedPairs -}}\n {{ if $index }}, {{ end }}\n {{- $label.Name }}=\"{{ $label.Value -}}\"\n {{- end }}\n {{- end -}}\n )\n {{- end }}\n text: \u003e-\n {{ range .Alerts -}}\n *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}\n\n *Description:* {{ .Annotations.description }}\n\n *Details:*\n {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`\n {{ end }}\n {{ end }}\n\n- name: 'default-slack-receiver'\n slack_configs:\n - api_url: 'TE07RD1V1/B01UUK23B6C/hZTcCu42FUv8d6rtirHtcYIi'\n channel: '#fdio-infra-monitoring'\n send_resolved: true\n icon_url: https://avatars3.githubusercontent.com/u/3380462\n title: |-\n [{{ .Status | toUpper }}{{ if eq .Status \"firing\" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}\n {{- if gt (len .CommonLabels) (len .GroupLabels) -}}\n {{\" \"}}(\n {{- with .CommonLabels.Remove .GroupLabels.Names }}\n {{- range $index, $label := .SortedPairs -}}\n {{ if $index }}, {{ end }}\n {{- $label.Name }}=\"{{ $label.Value -}}\"\n {{- end }}\n {{- end -}}\n )\n {{- end }}\n text: \u003e-\n {{ range .Alerts -}}\n *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}\n\n *Description:* {{ .Annotations.description }}\n\n *Details:*\n {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`\n {{ end }}\n {{ end }}\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"alertmanager\"\n port = \"alertmanager\"\n tags = [ \"alertmanager${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Alertmanager Check Live\"\n type = \"http\"\n path = \"/-/healthy\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = 1000\n memory = 1024\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"alertmanager\" {\n static = 9093\n }\n }\n }\n }\n }\n}",
"json": null,
- "modify_index": "7510356",
+ "modify_index": "8219920",
"name": "prod-alertmanager",
"namespace": "default",
"policy_override": null,
"schema_version": 0,
"attributes": {
"filename": null,
- "id": "956a0dc58ad464e6207ce36b133b3a3331b1c102588adc2b0e1261dae265c506",
- "rendered": "job \"prod-grafana\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-grafana\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-grafana\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"grafana/grafana:7.3.7\"\n volumes = [\n \"secrets/prometheus.yml:/etc/grafana/provisioning/datasources/prometheus.yml\",\n \"secrets/dashboards.yml:/etc/grafana/provisioning/dashboards/dashboards.yml\",\n \"secrets/grafana.ini:/etc/grafana/grafana.ini\",\n \"secrets/node_exporter.json:/etc/grafana/provisioning/dashboards/node_exporter.json\",\n \"secrets/docker_cadvisor.json:/etc/grafana/provisioning/dashboards/docker_cadvisor.json\",\n \"secrets/nomad.json:/etc/grafana/provisioning/dashboards/nomad.json\",\n \"secrets/consul.json:/etc/grafana/provisioning/dashboards/consul.json\",\n \"secrets/prometheus.json:/etc/grafana/provisioning/dashboards/prometheus.json\",\n \"secrets/blackbox_exporter_http.json:/etc/grafana/provisioning/dashboards/blackbox_exporter_http.json\",\n \"secrets/blackbox_exporter_icmp.json:/etc/grafana/provisioning/dashboards/blackbox_exporter_icmp.json\"\n ]\n }\n\n artifact {\n # Prometheus Node Exporter\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/node_exporter.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Docker cAdvisor\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/docker_cadvisor.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Nomad\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/nomad.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Consul\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/consul.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Prometheus\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/prometheus.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Prometheus Blackbox Exporter HTTP\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/blackbox_exporter_http.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Prometheus Blackbox Exporter ICMP\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/blackbox_exporter_icmp.json\"\n destination = \"secrets/\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/prometheus.yml\"\n data = \u003c\u003cEOH\napiVersion: 1\ndatasources:\n- name: Prometheus\n type: prometheus\n access: direct\n orgId: 1\n url: http://prometheus.service.consul:9090\n basicAuth: false\n isDefault: true\n version: 1\n editable: false\nEOH\n }\n\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/dashboards.yml\"\n data = \u003c\u003cEOH\napiVersion: 1\nproviders:\n- name: dashboards\n type: file\n disableDeletion: false\n updateIntervalSeconds: 10\n allowUiUpdates: false\n options:\n path: /etc/grafana/provisioning/dashboards\n foldersFromFilesStructure: true\nEOH\n }\n\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/grafana.ini\"\n data = \u003c\u003cEOH\napp_mode = production\n\n[metrics]\nenabled = true\n\n[server]\nprotocol = http\nhttp_port = 3000\nroot_url = http://grafana.service.consul:3000\nenable_gzip = true\n;cert_file =\n;cert_key =\n\n[security]\nadmin_user = grafanauser\nadmin_password = Grafana1234\nsecret_key = SW2YcwTIb9zpOOhoPsMm\n\n[users]\nallow_sign_up = false\nallow_org_create = false\nauto_assign_org = true\nauto_assign_org_role = Viewer\ndefault_theme = dark\n\n[auth.basic]\nenabled = true\n\n[auth]\ndisable_login_form = false\ndisable_signout_menu = false\n\n[auth.anonymous]\nenabled = false\n\n[log]\nmode = console\nlevel = info\n\n[log.console]\nlevel = info\nformat = console\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"grafana\"\n port = \"grafana\"\n tags = [ \"grafana${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Grafana Check Live\"\n type = \"http\"\n protocol = \"http\"\n tls_skip_verify = true\n path = \"/api/health\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = 1000\n memory = 2048\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"grafana\" {\n static = 3000\n }\n }\n }\n }\n }\n}",
- "template": "job \"${job_name}\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"${datacenters}\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n%{ if use_canary }\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n%{ endif }\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-${service_name}\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = ${group_count}\n\n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"$${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-${service_name}\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"${image}\"\n volumes = [\n \"secrets/prometheus.yml:/etc/grafana/provisioning/datasources/prometheus.yml\",\n \"secrets/dashboards.yml:/etc/grafana/provisioning/dashboards/dashboards.yml\",\n \"secrets/grafana.ini:/etc/grafana/grafana.ini\",\n \"secrets/node_exporter.json:/etc/grafana/provisioning/dashboards/node_exporter.json\",\n \"secrets/docker_cadvisor.json:/etc/grafana/provisioning/dashboards/docker_cadvisor.json\",\n \"secrets/nomad.json:/etc/grafana/provisioning/dashboards/nomad.json\",\n \"secrets/consul.json:/etc/grafana/provisioning/dashboards/consul.json\",\n \"secrets/prometheus.json:/etc/grafana/provisioning/dashboards/prometheus.json\",\n \"secrets/blackbox_exporter_http.json:/etc/grafana/provisioning/dashboards/blackbox_exporter_http.json\",\n \"secrets/blackbox_exporter_icmp.json:/etc/grafana/provisioning/dashboards/blackbox_exporter_icmp.json\"\n ]\n }\n\n artifact {\n # Prometheus Node Exporter\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/node_exporter.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Docker cAdvisor\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/docker_cadvisor.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Nomad\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/nomad.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Consul\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/consul.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Prometheus\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/prometheus.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Prometheus Blackbox Exporter HTTP\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/blackbox_exporter_http.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Prometheus Blackbox Exporter ICMP\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/blackbox_exporter_icmp.json\"\n destination = \"secrets/\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/prometheus.yml\"\n data = \u003c\u003cEOH\napiVersion: 1\ndatasources:\n- name: Prometheus\n type: prometheus\n access: direct\n orgId: 1\n url: http://prometheus.service.consul:9090\n basicAuth: false\n isDefault: true\n version: 1\n editable: false\nEOH\n }\n\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/dashboards.yml\"\n data = \u003c\u003cEOH\napiVersion: 1\nproviders:\n- name: dashboards\n type: file\n disableDeletion: false\n updateIntervalSeconds: 10\n allowUiUpdates: false\n options:\n path: /etc/grafana/provisioning/dashboards\n foldersFromFilesStructure: true\nEOH\n }\n\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/grafana.ini\"\n data = \u003c\u003cEOH\napp_mode = production\n\n[metrics]\nenabled = true\n\n[server]\nprotocol = http\nhttp_port = ${port}\nroot_url = http://${service_name}.service.consul:${port}\nenable_gzip = true\n;cert_file =\n;cert_key =\n\n[security]\nadmin_user = grafanauser\nadmin_password = Grafana1234\nsecret_key = SW2YcwTIb9zpOOhoPsMm\n\n[users]\nallow_sign_up = false\nallow_org_create = false\nauto_assign_org = true\nauto_assign_org_role = Viewer\ndefault_theme = dark\n\n[auth.basic]\nenabled = true\n\n[auth]\ndisable_login_form = false\ndisable_signout_menu = false\n\n[auth.anonymous]\nenabled = false\n\n[log]\nmode = console\nlevel = info\n\n[log.console]\nlevel = info\nformat = console\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"${service_name}\"\n port = \"${service_name}\"\n tags = [ \"${service_name}$${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Grafana Check Live\"\n type = \"http\"\n protocol = \"http\"\n tls_skip_verify = true\n path = \"/api/health\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = ${cpu}\n memory = ${mem}\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"${service_name}\" {\n static = ${port}\n }\n }\n }\n }\n }\n}",
+ "id": "cf7f3cd265a99a6f72f774f25564f1ec0e9e2c268a8f76112aed6cffe73bc4d4",
+ "rendered": "job \"prod-grafana\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n\n }\n\n # The reschedule stanza specifies the group's rescheduling strategy. If\n # specified at the job level, the configuration will apply to all groups\n # within the job. If the reschedule stanza is present on both the job and the\n # group, they are merged with the group stanza taking the highest precedence\n # and then the job.\n reschedule {\n delay = \"30s\"\n delay_function = \"constant\"\n unlimited = true\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-grafana\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n # The restart stanza configures a tasks's behavior on task failure. Restarts\n # happen on the client that is running the task.\n #\n # https://www.nomadproject.io/docs/job-specification/restart\n #\n restart {\n interval = \"30m\"\n attempts = 40\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-grafana\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"grafana/grafana:7.3.7\"\n dns_servers = [ \"172.17.0.1\" ]\n volumes = [\n \"secrets/prometheus.yml:/etc/grafana/provisioning/datasources/prometheus.yml\",\n \"secrets/dashboards.yml:/etc/grafana/provisioning/dashboards/dashboards.yml\",\n \"secrets/grafana.ini:/etc/grafana/grafana.ini\",\n \"secrets/node_exporter.json:/etc/grafana/provisioning/dashboards/node_exporter.json\",\n \"secrets/docker_cadvisor.json:/etc/grafana/provisioning/dashboards/docker_cadvisor.json\",\n \"secrets/nomad.json:/etc/grafana/provisioning/dashboards/nomad.json\",\n \"secrets/consul.json:/etc/grafana/provisioning/dashboards/consul.json\",\n \"secrets/prometheus.json:/etc/grafana/provisioning/dashboards/prometheus.json\",\n \"secrets/blackbox_exporter_http.json:/etc/grafana/provisioning/dashboards/blackbox_exporter_http.json\",\n \"secrets/blackbox_exporter_icmp.json:/etc/grafana/provisioning/dashboards/blackbox_exporter_icmp.json\"\n ]\n }\n\n artifact {\n # Prometheus Node Exporter\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/node_exporter.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Docker cAdvisor\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/docker_cadvisor.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Nomad\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/nomad.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Consul\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/consul.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Prometheus\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/prometheus.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Prometheus Blackbox Exporter HTTP\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/blackbox_exporter_http.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Prometheus Blackbox Exporter ICMP\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/blackbox_exporter_icmp.json\"\n destination = \"secrets/\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/prometheus.yml\"\n data = \u003c\u003cEOH\napiVersion: 1\ndatasources:\n- name: Prometheus\n type: prometheus\n access: direct\n orgId: 1\n url: http://prometheus.service.consul:9090\n basicAuth: false\n isDefault: true\n version: 1\n editable: false\nEOH\n }\n\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/dashboards.yml\"\n data = \u003c\u003cEOH\napiVersion: 1\nproviders:\n- name: dashboards\n type: file\n disableDeletion: false\n updateIntervalSeconds: 10\n allowUiUpdates: false\n options:\n path: /etc/grafana/provisioning/dashboards\n foldersFromFilesStructure: true\nEOH\n }\n\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/grafana.ini\"\n data = \u003c\u003cEOH\napp_mode = production\n\n[metrics]\nenabled = true\n\n[server]\nprotocol = http\nhttp_port = 3000\nroot_url = http://grafana.service.consul:3000\nenable_gzip = true\n;cert_file =\n;cert_key =\n\n[security]\nadmin_user = grafanauser\nadmin_password = Grafana1234\nsecret_key = SW2YcwTIb9zpOOhoPsMm\n\n[users]\nallow_sign_up = false\nallow_org_create = false\nauto_assign_org = true\nauto_assign_org_role = Viewer\ndefault_theme = dark\n\n[auth.basic]\nenabled = true\n\n[auth]\ndisable_login_form = false\ndisable_signout_menu = false\n\n[auth.anonymous]\nenabled = false\n\n[log]\nmode = console\nlevel = info\n\n[log.console]\nlevel = info\nformat = console\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"grafana\"\n port = \"grafana\"\n tags = [ \"grafana${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Grafana Check Live\"\n type = \"http\"\n protocol = \"http\"\n tls_skip_verify = true\n path = \"/api/health\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = 1000\n memory = 2048\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"grafana\" {\n static = 3000\n }\n }\n }\n }\n }\n}",
+ "template": "job \"${job_name}\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"${datacenters}\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n%{ if use_canary }\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n%{ endif }\n }\n\n # The reschedule stanza specifies the group's rescheduling strategy. If\n # specified at the job level, the configuration will apply to all groups\n # within the job. If the reschedule stanza is present on both the job and the\n # group, they are merged with the group stanza taking the highest precedence\n # and then the job.\n reschedule {\n delay = \"30s\"\n delay_function = \"constant\"\n unlimited = true\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-${service_name}\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = ${group_count}\n\n # The restart stanza configures a tasks's behavior on task failure. Restarts\n # happen on the client that is running the task.\n #\n # https://www.nomadproject.io/docs/job-specification/restart\n #\n restart {\n interval = \"30m\"\n attempts = 40\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"$${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-${service_name}\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"${image}\"\n dns_servers = [ \"172.17.0.1\" ]\n volumes = [\n \"secrets/prometheus.yml:/etc/grafana/provisioning/datasources/prometheus.yml\",\n \"secrets/dashboards.yml:/etc/grafana/provisioning/dashboards/dashboards.yml\",\n \"secrets/grafana.ini:/etc/grafana/grafana.ini\",\n \"secrets/node_exporter.json:/etc/grafana/provisioning/dashboards/node_exporter.json\",\n \"secrets/docker_cadvisor.json:/etc/grafana/provisioning/dashboards/docker_cadvisor.json\",\n \"secrets/nomad.json:/etc/grafana/provisioning/dashboards/nomad.json\",\n \"secrets/consul.json:/etc/grafana/provisioning/dashboards/consul.json\",\n \"secrets/prometheus.json:/etc/grafana/provisioning/dashboards/prometheus.json\",\n \"secrets/blackbox_exporter_http.json:/etc/grafana/provisioning/dashboards/blackbox_exporter_http.json\",\n \"secrets/blackbox_exporter_icmp.json:/etc/grafana/provisioning/dashboards/blackbox_exporter_icmp.json\"\n ]\n }\n\n artifact {\n # Prometheus Node Exporter\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/node_exporter.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Docker cAdvisor\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/docker_cadvisor.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Nomad\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/nomad.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Consul\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/consul.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Prometheus\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/prometheus.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Prometheus Blackbox Exporter HTTP\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/blackbox_exporter_http.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Prometheus Blackbox Exporter ICMP\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/blackbox_exporter_icmp.json\"\n destination = \"secrets/\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/prometheus.yml\"\n data = \u003c\u003cEOH\napiVersion: 1\ndatasources:\n- name: Prometheus\n type: prometheus\n access: direct\n orgId: 1\n url: http://prometheus.service.consul:9090\n basicAuth: false\n isDefault: true\n version: 1\n editable: false\nEOH\n }\n\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/dashboards.yml\"\n data = \u003c\u003cEOH\napiVersion: 1\nproviders:\n- name: dashboards\n type: file\n disableDeletion: false\n updateIntervalSeconds: 10\n allowUiUpdates: false\n options:\n path: /etc/grafana/provisioning/dashboards\n foldersFromFilesStructure: true\nEOH\n }\n\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/grafana.ini\"\n data = \u003c\u003cEOH\napp_mode = production\n\n[metrics]\nenabled = true\n\n[server]\nprotocol = http\nhttp_port = ${port}\nroot_url = http://${service_name}.service.consul:${port}\nenable_gzip = true\n;cert_file =\n;cert_key =\n\n[security]\nadmin_user = grafanauser\nadmin_password = Grafana1234\nsecret_key = SW2YcwTIb9zpOOhoPsMm\n\n[users]\nallow_sign_up = false\nallow_org_create = false\nauto_assign_org = true\nauto_assign_org_role = Viewer\ndefault_theme = dark\n\n[auth.basic]\nenabled = true\n\n[auth]\ndisable_login_form = false\ndisable_signout_menu = false\n\n[auth.anonymous]\nenabled = false\n\n[log]\nmode = console\nlevel = info\n\n[log.console]\nlevel = info\nformat = console\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"${service_name}\"\n port = \"${service_name}\"\n tags = [ \"${service_name}$${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Grafana Check Live\"\n type = \"http\"\n protocol = \"http\"\n tls_skip_verify = true\n path = \"/api/health\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = ${cpu}\n memory = ${mem}\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"${service_name}\" {\n static = ${port}\n }\n }\n }\n }\n }\n}",
"vars": {
"cpu": "1000",
"datacenters": "yul1",
"schema_version": 0,
"attributes": {
"allocation_ids": [
- "666f879f-f189-e038-9a57-bcbd758060fa",
- "1ddd68d2-ab33-a727-c667-1713435b506b"
+ "24a62387-6e3e-2a43-0d90-a287f161b4d9"
],
"datacenters": [
"yul1"
],
- "deployment_id": "c0f52a6f-cbe6-cfe8-61bc-cb39b033867c",
+ "deployment_id": "6d9fa6f6-7f84-4765-9488-7d92f32ec4df",
"deployment_status": "successful",
"deregister_on_destroy": true,
"deregister_on_id_change": true,
"detach": false,
"id": "prod-grafana",
- "jobspec": "job \"prod-grafana\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-grafana\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-grafana\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"grafana/grafana:7.3.7\"\n volumes = [\n \"secrets/prometheus.yml:/etc/grafana/provisioning/datasources/prometheus.yml\",\n \"secrets/dashboards.yml:/etc/grafana/provisioning/dashboards/dashboards.yml\",\n \"secrets/grafana.ini:/etc/grafana/grafana.ini\",\n \"secrets/node_exporter.json:/etc/grafana/provisioning/dashboards/node_exporter.json\",\n \"secrets/docker_cadvisor.json:/etc/grafana/provisioning/dashboards/docker_cadvisor.json\",\n \"secrets/nomad.json:/etc/grafana/provisioning/dashboards/nomad.json\",\n \"secrets/consul.json:/etc/grafana/provisioning/dashboards/consul.json\",\n \"secrets/prometheus.json:/etc/grafana/provisioning/dashboards/prometheus.json\",\n \"secrets/blackbox_exporter_http.json:/etc/grafana/provisioning/dashboards/blackbox_exporter_http.json\",\n \"secrets/blackbox_exporter_icmp.json:/etc/grafana/provisioning/dashboards/blackbox_exporter_icmp.json\"\n ]\n }\n\n artifact {\n # Prometheus Node Exporter\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/node_exporter.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Docker cAdvisor\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/docker_cadvisor.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Nomad\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/nomad.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Consul\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/consul.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Prometheus\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/prometheus.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Prometheus Blackbox Exporter HTTP\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/blackbox_exporter_http.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Prometheus Blackbox Exporter ICMP\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/blackbox_exporter_icmp.json\"\n destination = \"secrets/\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/prometheus.yml\"\n data = \u003c\u003cEOH\napiVersion: 1\ndatasources:\n- name: Prometheus\n type: prometheus\n access: direct\n orgId: 1\n url: http://prometheus.service.consul:9090\n basicAuth: false\n isDefault: true\n version: 1\n editable: false\nEOH\n }\n\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/dashboards.yml\"\n data = \u003c\u003cEOH\napiVersion: 1\nproviders:\n- name: dashboards\n type: file\n disableDeletion: false\n updateIntervalSeconds: 10\n allowUiUpdates: false\n options:\n path: /etc/grafana/provisioning/dashboards\n foldersFromFilesStructure: true\nEOH\n }\n\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/grafana.ini\"\n data = \u003c\u003cEOH\napp_mode = production\n\n[metrics]\nenabled = true\n\n[server]\nprotocol = http\nhttp_port = 3000\nroot_url = http://grafana.service.consul:3000\nenable_gzip = true\n;cert_file =\n;cert_key =\n\n[security]\nadmin_user = grafanauser\nadmin_password = Grafana1234\nsecret_key = SW2YcwTIb9zpOOhoPsMm\n\n[users]\nallow_sign_up = false\nallow_org_create = false\nauto_assign_org = true\nauto_assign_org_role = Viewer\ndefault_theme = dark\n\n[auth.basic]\nenabled = true\n\n[auth]\ndisable_login_form = false\ndisable_signout_menu = false\n\n[auth.anonymous]\nenabled = false\n\n[log]\nmode = console\nlevel = info\n\n[log.console]\nlevel = info\nformat = console\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"grafana\"\n port = \"grafana\"\n tags = [ \"grafana${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Grafana Check Live\"\n type = \"http\"\n protocol = \"http\"\n tls_skip_verify = true\n path = \"/api/health\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = 1000\n memory = 2048\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"grafana\" {\n static = 3000\n }\n }\n }\n }\n }\n}",
+ "jobspec": "job \"prod-grafana\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n\n }\n\n # The reschedule stanza specifies the group's rescheduling strategy. If\n # specified at the job level, the configuration will apply to all groups\n # within the job. If the reschedule stanza is present on both the job and the\n # group, they are merged with the group stanza taking the highest precedence\n # and then the job.\n reschedule {\n delay = \"30s\"\n delay_function = \"constant\"\n unlimited = true\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-grafana\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n # The restart stanza configures a tasks's behavior on task failure. Restarts\n # happen on the client that is running the task.\n #\n # https://www.nomadproject.io/docs/job-specification/restart\n #\n restart {\n interval = \"30m\"\n attempts = 40\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-grafana\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"grafana/grafana:7.3.7\"\n dns_servers = [ \"172.17.0.1\" ]\n volumes = [\n \"secrets/prometheus.yml:/etc/grafana/provisioning/datasources/prometheus.yml\",\n \"secrets/dashboards.yml:/etc/grafana/provisioning/dashboards/dashboards.yml\",\n \"secrets/grafana.ini:/etc/grafana/grafana.ini\",\n \"secrets/node_exporter.json:/etc/grafana/provisioning/dashboards/node_exporter.json\",\n \"secrets/docker_cadvisor.json:/etc/grafana/provisioning/dashboards/docker_cadvisor.json\",\n \"secrets/nomad.json:/etc/grafana/provisioning/dashboards/nomad.json\",\n \"secrets/consul.json:/etc/grafana/provisioning/dashboards/consul.json\",\n \"secrets/prometheus.json:/etc/grafana/provisioning/dashboards/prometheus.json\",\n \"secrets/blackbox_exporter_http.json:/etc/grafana/provisioning/dashboards/blackbox_exporter_http.json\",\n \"secrets/blackbox_exporter_icmp.json:/etc/grafana/provisioning/dashboards/blackbox_exporter_icmp.json\"\n ]\n }\n\n artifact {\n # Prometheus Node Exporter\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/node_exporter.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Docker cAdvisor\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/docker_cadvisor.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Nomad\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/nomad.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Consul\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/consul.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Prometheus\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/prometheus.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Prometheus Blackbox Exporter HTTP\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/blackbox_exporter_http.json\"\n destination = \"secrets/\"\n }\n\n artifact {\n # Prometheus Blackbox Exporter ICMP\n source = \"https://raw.githubusercontent.com/pmikus/grafana-dashboards/main/blackbox_exporter_icmp.json\"\n destination = \"secrets/\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/prometheus.yml\"\n data = \u003c\u003cEOH\napiVersion: 1\ndatasources:\n- name: Prometheus\n type: prometheus\n access: direct\n orgId: 1\n url: http://prometheus.service.consul:9090\n basicAuth: false\n isDefault: true\n version: 1\n editable: false\nEOH\n }\n\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/dashboards.yml\"\n data = \u003c\u003cEOH\napiVersion: 1\nproviders:\n- name: dashboards\n type: file\n disableDeletion: false\n updateIntervalSeconds: 10\n allowUiUpdates: false\n options:\n path: /etc/grafana/provisioning/dashboards\n foldersFromFilesStructure: true\nEOH\n }\n\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/grafana.ini\"\n data = \u003c\u003cEOH\napp_mode = production\n\n[metrics]\nenabled = true\n\n[server]\nprotocol = http\nhttp_port = 3000\nroot_url = http://grafana.service.consul:3000\nenable_gzip = true\n;cert_file =\n;cert_key =\n\n[security]\nadmin_user = grafanauser\nadmin_password = Grafana1234\nsecret_key = SW2YcwTIb9zpOOhoPsMm\n\n[users]\nallow_sign_up = false\nallow_org_create = false\nauto_assign_org = true\nauto_assign_org_role = Viewer\ndefault_theme = dark\n\n[auth.basic]\nenabled = true\n\n[auth]\ndisable_login_form = false\ndisable_signout_menu = false\n\n[auth.anonymous]\nenabled = false\n\n[log]\nmode = console\nlevel = info\n\n[log.console]\nlevel = info\nformat = console\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"grafana\"\n port = \"grafana\"\n tags = [ \"grafana${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Grafana Check Live\"\n type = \"http\"\n protocol = \"http\"\n tls_skip_verify = true\n path = \"/api/health\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = 1000\n memory = 2048\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"grafana\" {\n static = 3000\n }\n }\n }\n }\n }\n}",
"json": null,
- "modify_index": "7541149",
+ "modify_index": "7575032",
"name": "prod-grafana",
"namespace": "default",
"policy_override": null,
"schema_version": 0,
"attributes": {
"allocation_ids": [
- "1087c333-6237-f42a-8596-613d215c653d",
- "7caa599a-7dd9-a528-dcd2-aa78560d16e3",
- "81242876-d7ba-bf67-97cd-1caf8a820ddb",
- "5cd6cbb9-6dc9-b7b0-6839-a4a753b56563",
- "2886b4db-e0a4-f958-88fe-23f88ca0c738",
- "ce328168-0c04-61e8-12dd-a34feba655f8",
- "0cd8317f-c76d-4a23-d6ce-ee5e4d635f0d",
- "9cb47da0-b88d-6236-99b5-33df6ac19342"
+ "bd315c5e-035d-3a08-698d-d119fb48035f",
+ "e82e0119-4d2e-89eb-baa3-0ec6bde71661",
+ "24e462a6-6d55-a109-47bf-4c83ad5596a7"
],
"datacenters": [
"yul1"
"schema_version": 0,
"attributes": {
"filename": null,
- "id": "5717ad8abe0a1dc946ee852ad7bdb1f53dc0e7c0cf8c7efabee9544624e507b8",
- "rendered": "job \"prod-nginx\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers.html\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 0\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = false\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 0\n }\n\n # The reschedule stanza specifies the group's rescheduling strategy. If\n # specified at the job level, the configuration will apply to all groups\n # within the job. If the reschedule stanza is present on both the job and the\n # group, they are merged with the group stanza taking the highest precedence\n # and then the job.\n reschedule {\n delay = \"30s\"\n delay_function = \"constant\"\n unlimited = true\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group.html\n #\n group \"prod-group1-nginx\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n # https://www.nomadproject.io/docs/job-specification/volume\n \n volume \"prod-volume1-nginx\" {\n type = \"host\"\n read_only = false\n source = \"prod-volume-data1-1\"\n }\n \n\n # The restart stanza configures a tasks's behavior on task failure. Restarts\n # happen on the client that is running the task.\n restart {\n interval = \"10m\"\n attempts = 2\n delay = \"15s\"\n mode = \"fail\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task.html\n #\n task \"prod-task1-nginx\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"nginx:stable\"\n port_map {\n https = 443\n }\n privileged = false\n volumes = [\n \"/etc/consul.d/ssl/consul.pem:/etc/ssl/certs/nginx-cert.pem\",\n \"/etc/consul.d/ssl/consul-key.pem:/etc/ssl/private/nginx-key.pem\",\n \"custom/upstream.conf:/etc/nginx/conf.d/upstream.conf\",\n \"custom/logs.conf:/etc/nginx/conf.d/logs.conf\",\n \"custom/docs.conf:/etc/nginx/conf.d/docs.conf\"\n ]\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template.html\n #\n template {\n data = \u003c\u003cEOH\n upstream storage {\n {{ range service \"storage\" }}\n server {{ .Address }}:{{ .Port }};\n {{ end }}\n }\n EOH\n destination = \"custom/upstream.conf\"\n }\n template {\n data = \u003c\u003cEOH\n server {\n listen 443 ssl default_server;\n server_name logs.nginx.service.consul;\n keepalive_timeout 70;\n ssl_session_cache shared:SSL:10m;\n ssl_session_timeout 10m;\n ssl_protocols TLSv1.2;\n ssl_prefer_server_ciphers on;\n ssl_ciphers \"ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384\";\n ssl_certificate /etc/ssl/certs/nginx-cert.pem;\n ssl_certificate_key /etc/ssl/private/nginx-key.pem;\n location / {\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/;\n server_name_in_redirect off;\n }\n location ~ (.*html.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type text/html;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n location ~ (.*txt.gz|.*log.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type text/plain;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n location ~ (.*xml.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type application/xml;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n }\n EOH\n destination = \"custom/logs.conf\"\n }\n template {\n data = \u003c\u003cEOH\n server {\n listen 443 ssl;\n server_name docs.nginx.service.consul;\n keepalive_timeout 70;\n ssl_session_cache shared:SSL:10m;\n ssl_session_timeout 10m;\n ssl_protocols TLSv1.2;\n ssl_prefer_server_ciphers on;\n ssl_ciphers \"ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384\";\n ssl_certificate /etc/ssl/certs/nginx-cert.pem;\n ssl_certificate_key /etc/ssl/private/nginx-key.pem;\n location / {\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/docs.fd.io/;\n server_name_in_redirect off;\n }\n }\n EOH\n destination = \"custom/docs.conf\"\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service.html\n #\n service {\n name = \"nginx\"\n port = \"https\"\n tags = [ \"docs\", \"logs\" ]\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources.html\n #\n resources {\n cpu = 2000\n memory = 4096\n network {\n mode = \"bridge\"\n port \"https\" {\n static = 443\n }\n }\n }\n }\n }\n}",
- "template": "job \"${job_name}\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"${datacenters}\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers.html\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 0\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = false\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 0\n }\n\n # The reschedule stanza specifies the group's rescheduling strategy. If\n # specified at the job level, the configuration will apply to all groups\n # within the job. If the reschedule stanza is present on both the job and the\n # group, they are merged with the group stanza taking the highest precedence\n # and then the job.\n reschedule {\n delay = \"30s\"\n delay_function = \"constant\"\n unlimited = true\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group.html\n #\n group \"prod-group1-nginx\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n # https://www.nomadproject.io/docs/job-specification/volume\n %{ if use_host_volume }\n volume \"prod-volume1-nginx\" {\n type = \"host\"\n read_only = false\n source = \"${host_volume}\"\n }\n %{ endif }\n\n # The restart stanza configures a tasks's behavior on task failure. Restarts\n # happen on the client that is running the task.\n restart {\n interval = \"10m\"\n attempts = 2\n delay = \"15s\"\n mode = \"fail\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task.html\n #\n task \"prod-task1-nginx\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"nginx:stable\"\n port_map {\n https = 443\n }\n privileged = false\n volumes = [\n \"/etc/consul.d/ssl/consul.pem:/etc/ssl/certs/nginx-cert.pem\",\n \"/etc/consul.d/ssl/consul-key.pem:/etc/ssl/private/nginx-key.pem\",\n \"custom/upstream.conf:/etc/nginx/conf.d/upstream.conf\",\n \"custom/logs.conf:/etc/nginx/conf.d/logs.conf\",\n \"custom/docs.conf:/etc/nginx/conf.d/docs.conf\"\n ]\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template.html\n #\n template {\n data = \u003c\u003cEOH\n upstream storage {\n {{ range service \"storage\" }}\n server {{ .Address }}:{{ .Port }};\n {{ end }}\n }\n EOH\n destination = \"custom/upstream.conf\"\n }\n template {\n data = \u003c\u003cEOH\n server {\n listen 443 ssl default_server;\n server_name logs.nginx.service.consul;\n keepalive_timeout 70;\n ssl_session_cache shared:SSL:10m;\n ssl_session_timeout 10m;\n ssl_protocols TLSv1.2;\n ssl_prefer_server_ciphers on;\n ssl_ciphers \"ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384\";\n ssl_certificate /etc/ssl/certs/nginx-cert.pem;\n ssl_certificate_key /etc/ssl/private/nginx-key.pem;\n location / {\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/;\n server_name_in_redirect off;\n }\n location ~ (.*html.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type text/html;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n location ~ (.*txt.gz|.*log.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type text/plain;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n location ~ (.*xml.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type application/xml;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n }\n EOH\n destination = \"custom/logs.conf\"\n }\n template {\n data = \u003c\u003cEOH\n server {\n listen 443 ssl;\n server_name docs.nginx.service.consul;\n keepalive_timeout 70;\n ssl_session_cache shared:SSL:10m;\n ssl_session_timeout 10m;\n ssl_protocols TLSv1.2;\n ssl_prefer_server_ciphers on;\n ssl_ciphers \"ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384\";\n ssl_certificate /etc/ssl/certs/nginx-cert.pem;\n ssl_certificate_key /etc/ssl/private/nginx-key.pem;\n location / {\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/docs.fd.io/;\n server_name_in_redirect off;\n }\n }\n EOH\n destination = \"custom/docs.conf\"\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service.html\n #\n service {\n name = \"nginx\"\n port = \"https\"\n tags = [ \"docs\", \"logs\" ]\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources.html\n #\n resources {\n cpu = 2000\n memory = 4096\n network {\n mode = \"bridge\"\n port \"https\" {\n static = 443\n }\n }\n }\n }\n }\n}",
+ "id": "70bf6c25655c0506a3f1a3946c114216b977c39241f495ef56ef0c07b888e8bc",
+ "rendered": "job \"prod-nginx\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers.html\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 0\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = false\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 0\n }\n\n # The reschedule stanza specifies the group's rescheduling strategy. If\n # specified at the job level, the configuration will apply to all groups\n # within the job. If the reschedule stanza is present on both the job and the\n # group, they are merged with the group stanza taking the highest precedence\n # and then the job.\n reschedule {\n delay = \"30s\"\n delay_function = \"constant\"\n unlimited = true\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group.html\n #\n group \"prod-group1-nginx\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n # https://www.nomadproject.io/docs/job-specification/volume\n \n volume \"prod-volume1-nginx\" {\n type = \"host\"\n read_only = false\n source = \"prod-volume-data1-1\"\n }\n \n\n # The restart stanza configures a tasks's behavior on task failure. Restarts\n # happen on the client that is running the task.\n #\n # https://www.nomadproject.io/docs/job-specification/restart\n #\n restart {\n interval = \"30m\"\n attempts = 40\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task.html\n #\n task \"prod-task1-nginx\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"nginx:stable\"\n port_map {\n https = 443\n }\n privileged = false\n volumes = [\n \"/etc/ssl/certs/docs.nginx.service.consul.crt:/etc/ssl/certs/docs.nginx.service.consul.crt\",\n \"/etc/ssl/certs/docs.nginx.service.consul.key:/etc/ssl/certs/docs.nginx.service.consul.key\",\n \"/etc/ssl/certs/logs.nginx.service.consul.crt:/etc/ssl/certs/logs.nginx.service.consul.crt\",\n \"/etc/ssl/certs/logs.nginx.service.consul.key:/etc/ssl/certs/logs.nginx.service.consul.key\",\n \"custom/upstream.conf:/etc/nginx/conf.d/upstream.conf\",\n \"custom/logs.conf:/etc/nginx/conf.d/logs.conf\",\n \"custom/docs.conf:/etc/nginx/conf.d/docs.conf\"\n ]\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template.html\n #\n template {\n data = \u003c\u003cEOH\n upstream storage {\n {{ range service \"storage\" }}\n server {{ .Address }}:{{ .Port }};\n {{ end }}\n }\n EOH\n destination = \"custom/upstream.conf\"\n }\n template {\n data = \u003c\u003cEOH\n server {\n listen 443 ssl default_server;\n server_name logs.nginx.service.consul;\n keepalive_timeout 70;\n ssl_session_cache shared:SSL:10m;\n ssl_session_timeout 10m;\n ssl_protocols TLSv1.2;\n ssl_prefer_server_ciphers on;\n ssl_ciphers \"ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384\";\n ssl_certificate /etc/ssl/certs/logs.nginx.service.consul.crt;\n ssl_certificate_key /etc/ssl/certs/logs.nginx.service.consul.key;\n location / {\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/;\n server_name_in_redirect off;\n }\n location ~ (.*html.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type text/html;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n location ~ (.*txt.gz|.*log.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type text/plain;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n location ~ (.*xml.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type application/xml;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n }\n EOH\n destination = \"custom/logs.conf\"\n }\n template {\n data = \u003c\u003cEOH\n server {\n listen 443 ssl;\n server_name docs.nginx.service.consul;\n keepalive_timeout 70;\n ssl_session_cache shared:SSL:10m;\n ssl_session_timeout 10m;\n ssl_protocols TLSv1.2;\n ssl_prefer_server_ciphers on;\n ssl_ciphers \"ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384\";\n ssl_certificate /etc/ssl/certs/docs.nginx.service.consul.crt;\n ssl_certificate_key /etc/ssl/certs/docs.nginx.service.consul.key;\n location / {\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/docs.fd.io/;\n server_name_in_redirect off;\n }\n }\n EOH\n destination = \"custom/docs.conf\"\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service.html\n #\n service {\n name = \"nginx\"\n port = \"https\"\n tags = [ \"docs\", \"logs\" ]\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources.html\n #\n resources {\n cpu = 2000\n memory = 4096\n network {\n mode = \"bridge\"\n port \"https\" {\n static = 443\n }\n }\n }\n }\n }\n}",
+ "template": "job \"${job_name}\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"${datacenters}\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers.html\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 0\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = false\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 0\n }\n\n # The reschedule stanza specifies the group's rescheduling strategy. If\n # specified at the job level, the configuration will apply to all groups\n # within the job. If the reschedule stanza is present on both the job and the\n # group, they are merged with the group stanza taking the highest precedence\n # and then the job.\n reschedule {\n delay = \"30s\"\n delay_function = \"constant\"\n unlimited = true\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group.html\n #\n group \"prod-group1-nginx\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n # https://www.nomadproject.io/docs/job-specification/volume\n %{ if use_host_volume }\n volume \"prod-volume1-nginx\" {\n type = \"host\"\n read_only = false\n source = \"${host_volume}\"\n }\n %{ endif }\n\n # The restart stanza configures a tasks's behavior on task failure. Restarts\n # happen on the client that is running the task.\n #\n # https://www.nomadproject.io/docs/job-specification/restart\n #\n restart {\n interval = \"30m\"\n attempts = 40\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task.html\n #\n task \"prod-task1-nginx\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"nginx:stable\"\n port_map {\n https = 443\n }\n privileged = false\n volumes = [\n \"/etc/ssl/certs/docs.nginx.service.consul.crt:/etc/ssl/certs/docs.nginx.service.consul.crt\",\n \"/etc/ssl/certs/docs.nginx.service.consul.key:/etc/ssl/certs/docs.nginx.service.consul.key\",\n \"/etc/ssl/certs/logs.nginx.service.consul.crt:/etc/ssl/certs/logs.nginx.service.consul.crt\",\n \"/etc/ssl/certs/logs.nginx.service.consul.key:/etc/ssl/certs/logs.nginx.service.consul.key\",\n \"custom/upstream.conf:/etc/nginx/conf.d/upstream.conf\",\n \"custom/logs.conf:/etc/nginx/conf.d/logs.conf\",\n \"custom/docs.conf:/etc/nginx/conf.d/docs.conf\"\n ]\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template.html\n #\n template {\n data = \u003c\u003cEOH\n upstream storage {\n {{ range service \"storage\" }}\n server {{ .Address }}:{{ .Port }};\n {{ end }}\n }\n EOH\n destination = \"custom/upstream.conf\"\n }\n template {\n data = \u003c\u003cEOH\n server {\n listen 443 ssl default_server;\n server_name logs.nginx.service.consul;\n keepalive_timeout 70;\n ssl_session_cache shared:SSL:10m;\n ssl_session_timeout 10m;\n ssl_protocols TLSv1.2;\n ssl_prefer_server_ciphers on;\n ssl_ciphers \"ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384\";\n ssl_certificate /etc/ssl/certs/logs.nginx.service.consul.crt;\n ssl_certificate_key /etc/ssl/certs/logs.nginx.service.consul.key;\n location / {\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/;\n server_name_in_redirect off;\n }\n location ~ (.*html.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type text/html;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n location ~ (.*txt.gz|.*log.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type text/plain;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n location ~ (.*xml.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type application/xml;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n }\n EOH\n destination = \"custom/logs.conf\"\n }\n template {\n data = \u003c\u003cEOH\n server {\n listen 443 ssl;\n server_name docs.nginx.service.consul;\n keepalive_timeout 70;\n ssl_session_cache shared:SSL:10m;\n ssl_session_timeout 10m;\n ssl_protocols TLSv1.2;\n ssl_prefer_server_ciphers on;\n ssl_ciphers \"ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384\";\n ssl_certificate /etc/ssl/certs/docs.nginx.service.consul.crt;\n ssl_certificate_key /etc/ssl/certs/docs.nginx.service.consul.key;\n location / {\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/docs.fd.io/;\n server_name_in_redirect off;\n }\n }\n EOH\n destination = \"custom/docs.conf\"\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service.html\n #\n service {\n name = \"nginx\"\n port = \"https\"\n tags = [ \"docs\", \"logs\" ]\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources.html\n #\n resources {\n cpu = 2000\n memory = 4096\n network {\n mode = \"bridge\"\n port \"https\" {\n static = 443\n }\n }\n }\n }\n }\n}",
"vars": {
"datacenters": "yul1",
"host_volume": "prod-volume-data1-1",
"schema_version": 0,
"attributes": {
"allocation_ids": [
- "ced30b06-35db-a3f2-e6d8-bf5724bd828a",
- "241b55c5-c91c-aa90-cac0-c394506811db"
+ "99dab0de-0e97-4ad8-56eb-ffdd062ef656",
+ "2a22caca-680f-d551-8d33-a236a446ecd7",
+ "7542b5ec-2690-6e2c-16de-e93ff5fddb7a",
+ "e5dd038d-ac82-49d9-24c0-338460688136"
],
"datacenters": [
"yul1"
"deregister_on_id_change": true,
"detach": false,
"id": "prod-nginx",
- "jobspec": "job \"prod-nginx\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers.html\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 0\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = false\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 0\n }\n\n # The reschedule stanza specifies the group's rescheduling strategy. If\n # specified at the job level, the configuration will apply to all groups\n # within the job. If the reschedule stanza is present on both the job and the\n # group, they are merged with the group stanza taking the highest precedence\n # and then the job.\n reschedule {\n delay = \"30s\"\n delay_function = \"constant\"\n unlimited = true\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group.html\n #\n group \"prod-group1-nginx\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n # https://www.nomadproject.io/docs/job-specification/volume\n \n volume \"prod-volume1-nginx\" {\n type = \"host\"\n read_only = false\n source = \"prod-volume-data1-1\"\n }\n \n\n # The restart stanza configures a tasks's behavior on task failure. Restarts\n # happen on the client that is running the task.\n restart {\n interval = \"10m\"\n attempts = 2\n delay = \"15s\"\n mode = \"fail\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task.html\n #\n task \"prod-task1-nginx\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"nginx:stable\"\n port_map {\n https = 443\n }\n privileged = false\n volumes = [\n \"/etc/consul.d/ssl/consul.pem:/etc/ssl/certs/nginx-cert.pem\",\n \"/etc/consul.d/ssl/consul-key.pem:/etc/ssl/private/nginx-key.pem\",\n \"custom/upstream.conf:/etc/nginx/conf.d/upstream.conf\",\n \"custom/logs.conf:/etc/nginx/conf.d/logs.conf\",\n \"custom/docs.conf:/etc/nginx/conf.d/docs.conf\"\n ]\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template.html\n #\n template {\n data = \u003c\u003cEOH\n upstream storage {\n {{ range service \"storage\" }}\n server {{ .Address }}:{{ .Port }};\n {{ end }}\n }\n EOH\n destination = \"custom/upstream.conf\"\n }\n template {\n data = \u003c\u003cEOH\n server {\n listen 443 ssl default_server;\n server_name logs.nginx.service.consul;\n keepalive_timeout 70;\n ssl_session_cache shared:SSL:10m;\n ssl_session_timeout 10m;\n ssl_protocols TLSv1.2;\n ssl_prefer_server_ciphers on;\n ssl_ciphers \"ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384\";\n ssl_certificate /etc/ssl/certs/nginx-cert.pem;\n ssl_certificate_key /etc/ssl/private/nginx-key.pem;\n location / {\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/;\n server_name_in_redirect off;\n }\n location ~ (.*html.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type text/html;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n location ~ (.*txt.gz|.*log.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type text/plain;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n location ~ (.*xml.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type application/xml;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n }\n EOH\n destination = \"custom/logs.conf\"\n }\n template {\n data = \u003c\u003cEOH\n server {\n listen 443 ssl;\n server_name docs.nginx.service.consul;\n keepalive_timeout 70;\n ssl_session_cache shared:SSL:10m;\n ssl_session_timeout 10m;\n ssl_protocols TLSv1.2;\n ssl_prefer_server_ciphers on;\n ssl_ciphers \"ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384\";\n ssl_certificate /etc/ssl/certs/nginx-cert.pem;\n ssl_certificate_key /etc/ssl/private/nginx-key.pem;\n location / {\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/docs.fd.io/;\n server_name_in_redirect off;\n }\n }\n EOH\n destination = \"custom/docs.conf\"\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service.html\n #\n service {\n name = \"nginx\"\n port = \"https\"\n tags = [ \"docs\", \"logs\" ]\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources.html\n #\n resources {\n cpu = 2000\n memory = 4096\n network {\n mode = \"bridge\"\n port \"https\" {\n static = 443\n }\n }\n }\n }\n }\n}",
+ "jobspec": "job \"prod-nginx\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers.html\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 0\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = false\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 0\n }\n\n # The reschedule stanza specifies the group's rescheduling strategy. If\n # specified at the job level, the configuration will apply to all groups\n # within the job. If the reschedule stanza is present on both the job and the\n # group, they are merged with the group stanza taking the highest precedence\n # and then the job.\n reschedule {\n delay = \"30s\"\n delay_function = \"constant\"\n unlimited = true\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group.html\n #\n group \"prod-group1-nginx\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n # https://www.nomadproject.io/docs/job-specification/volume\n \n volume \"prod-volume1-nginx\" {\n type = \"host\"\n read_only = false\n source = \"prod-volume-data1-1\"\n }\n \n\n # The restart stanza configures a tasks's behavior on task failure. Restarts\n # happen on the client that is running the task.\n #\n # https://www.nomadproject.io/docs/job-specification/restart\n #\n restart {\n interval = \"30m\"\n attempts = 40\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task.html\n #\n task \"prod-task1-nginx\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"nginx:stable\"\n port_map {\n https = 443\n }\n privileged = false\n volumes = [\n \"/etc/ssl/certs/docs.nginx.service.consul.crt:/etc/ssl/certs/docs.nginx.service.consul.crt\",\n \"/etc/ssl/certs/docs.nginx.service.consul.key:/etc/ssl/certs/docs.nginx.service.consul.key\",\n \"/etc/ssl/certs/logs.nginx.service.consul.crt:/etc/ssl/certs/logs.nginx.service.consul.crt\",\n \"/etc/ssl/certs/logs.nginx.service.consul.key:/etc/ssl/certs/logs.nginx.service.consul.key\",\n \"custom/upstream.conf:/etc/nginx/conf.d/upstream.conf\",\n \"custom/logs.conf:/etc/nginx/conf.d/logs.conf\",\n \"custom/docs.conf:/etc/nginx/conf.d/docs.conf\"\n ]\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template.html\n #\n template {\n data = \u003c\u003cEOH\n upstream storage {\n {{ range service \"storage\" }}\n server {{ .Address }}:{{ .Port }};\n {{ end }}\n }\n EOH\n destination = \"custom/upstream.conf\"\n }\n template {\n data = \u003c\u003cEOH\n server {\n listen 443 ssl default_server;\n server_name logs.nginx.service.consul;\n keepalive_timeout 70;\n ssl_session_cache shared:SSL:10m;\n ssl_session_timeout 10m;\n ssl_protocols TLSv1.2;\n ssl_prefer_server_ciphers on;\n ssl_ciphers \"ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384\";\n ssl_certificate /etc/ssl/certs/logs.nginx.service.consul.crt;\n ssl_certificate_key /etc/ssl/certs/logs.nginx.service.consul.key;\n location / {\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/;\n server_name_in_redirect off;\n }\n location ~ (.*html.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type text/html;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n location ~ (.*txt.gz|.*log.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type text/plain;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n location ~ (.*xml.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type application/xml;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n }\n EOH\n destination = \"custom/logs.conf\"\n }\n template {\n data = \u003c\u003cEOH\n server {\n listen 443 ssl;\n server_name docs.nginx.service.consul;\n keepalive_timeout 70;\n ssl_session_cache shared:SSL:10m;\n ssl_session_timeout 10m;\n ssl_protocols TLSv1.2;\n ssl_prefer_server_ciphers on;\n ssl_ciphers \"ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384\";\n ssl_certificate /etc/ssl/certs/docs.nginx.service.consul.crt;\n ssl_certificate_key /etc/ssl/certs/docs.nginx.service.consul.key;\n location / {\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/docs.fd.io/;\n server_name_in_redirect off;\n }\n }\n EOH\n destination = \"custom/docs.conf\"\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service.html\n #\n service {\n name = \"nginx\"\n port = \"https\"\n tags = [ \"docs\", \"logs\" ]\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources.html\n #\n resources {\n cpu = 2000\n memory = 4096\n network {\n mode = \"bridge\"\n port \"https\" {\n static = 443\n }\n }\n }\n }\n }\n}",
"json": null,
- "modify_index": "7541137",
+ "modify_index": "8219998",
"name": "prod-nginx",
"namespace": "default",
"policy_override": null,
"schema_version": 0,
"attributes": {
"filename": null,
- "id": "eddfe06cf2af83302365d353cc365dab387ccb1696b8a9be02dcab381ef527df",
- "rendered": "job \"prod-prometheus\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-prometheus\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 4\n\n # The volume stanza allows the group to specify that it requires a given\n # volume from the cluster.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/volume\n #\n \n volume \"prod-volume1-prometheus\" {\n type = \"host\"\n read_only = false\n source = \"prod-volume-data1-1\"\n }\n \n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-prometheus\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"exec\"\n\n \n volume_mount {\n volume = \"prod-volume1-prometheus\"\n destination = \"/data/\"\n read_only = false\n }\n \n\n \n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n command = \"local/prometheus-2.24.0.linux-amd64/prometheus\"\n args = [\n \"--config.file=secrets/prometheus.yml\",\n \"--storage.tsdb.path=/data/prometheus/\",\n \"--storage.tsdb.retention.time=15d\"\n ]\n }\n\n # The artifact stanza instructs Nomad to fetch and unpack a remote resource,\n # such as a file, tarball, or binary. Nomad downloads artifacts using the\n # popular go-getter library, which permits downloading artifacts from a\n # variety of locations using a URL as the input source.\n #\n # For more information and examples on the \"artifact\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/artifact\n #\n artifact {\n source = \"https://github.com/prometheus/prometheus/releases/download/v2.24.0/prometheus-2.24.0.linux-amd64.tar.gz\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/alerts.yml\"\n left_delimiter = \"{{{\"\n right_delimiter = \"}}}\"\n data = \u003c\u003cEOH\n---\ngroups:\n- name: \"Jenkins Job Health Exporter\"\n rules:\n - alert: JenkinsJobHealthExporterFailures\n expr: jenkins_job_failure{id=~\".*\"} \u003e jenkins_job_success{id=~\".*\"}\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Jenkins Job Health detected high failure rate on jenkins jobs.\"\n description: \"Job: {{ $labels.id }}\"\n - alert: JenkinsJobHealthExporterUnstable\n expr: jenkins_job_unstable{id=~\".*\"} \u003e jenkins_job_success{id=~\".*\"}\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Jenkins Job Health detected high unstable rate on jenkins jobs.\"\n description: \"Job: {{ $labels.id }}\"\n- name: \"Consul\"\n rules:\n - alert: ConsulServiceHealthcheckFailed\n expr: consul_catalog_service_node_healthy == 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul service healthcheck failed (instance {{ $labels.instance }}).\"\n description: \"Service: `{{ $labels.service_name }}` Healthcheck: `{{ $labels.service_id }}`.\"\n - alert: ConsulMissingMasterNode\n expr: consul_raft_peers \u003c 3\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul missing master node (instance {{ $labels.instance }}).\"\n description: \"Numbers of consul raft peers should be 3, in order to preserve quorum.\"\n - alert: ConsulAgentUnhealthy\n expr: consul_health_node_status{status=\"critical\"} == 1\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul agent unhealthy (instance {{ $labels.instance }}).\"\n description: \"A Consul agent is down.\"\n- name: \"Hosts\"\n rules:\n - alert: NodeDown\n expr: up == 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus target missing (instance {{ $labels.instance }}).\"\n description: \"A Prometheus target has disappeared. An exporter might be crashed.\"\n - alert: HostHighCpuLoad\n expr: 100 - (avg by(instance) (rate(node_cpu_seconds_total{mode=\"idle\"}[5m])) * 100) \u003e 95\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host high CPU load (instance {{ $labels.instance }}).\"\n description: \"CPU load is \u003e 95%.\"\n - alert: HostOutOfMemory\n expr: node_memory_MemAvailable_bytes / node_memory_MemTotal_bytes * 100 \u003c 10\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host out of memory (instance {{ $labels.instance }}).\"\n description: \"Node memory is filling up (\u003c 10% left).\"\n - alert: HostOomKillDetected\n expr: increase(node_vmstat_oom_kill[1m]) \u003e 0\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host OOM kill detected (instance {{ $labels.instance }}).\"\n description: \"OOM kill detected.\"\n - alert: HostMemoryUnderMemoryPressure\n expr: rate(node_vmstat_pgmajfault[1m]) \u003e 1000\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host memory under memory pressure (instance {{ $labels.instance }}).\"\n description: \"The node is under heavy memory pressure. High rate of major page faults.\"\n - alert: HostOutOfDiskSpace\n expr: (node_filesystem_avail_bytes * 100) / node_filesystem_size_bytes \u003c 10 and ON (instance, device, mountpoint) node_filesystem_readonly == 0\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host out of disk space (instance {{ $labels.instance }}).\"\n description: \"Disk is almost full (\u003c 10% left).\"\n - alert: HostRaidDiskFailure\n expr: node_md_disks{state=\"failed\"} \u003e 0\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host RAID disk failure (instance {{ $labels.instance }}).\"\n description: \"At least one device in RAID array on {{ $labels.instance }} failed. Array {{ $labels.md_device }} needs attention and possibly a disk swap.\"\n - alert: HostConntrackLimit\n expr: node_nf_conntrack_entries / node_nf_conntrack_entries_limit \u003e 0.8\n for: 5m\n labels:\n severity: warning\n annotations:\n summary: \"Host conntrack limit (instance {{ $labels.instance }}).\"\n description: \"The number of conntrack is approching limit.\"\n - alert: HostNetworkInterfaceSaturated\n expr: (rate(node_network_receive_bytes_total{device!~\"^tap.*\"}[1m]) + rate(node_network_transmit_bytes_total{device!~\"^tap.*\"}[1m])) / node_network_speed_bytes{device!~\"^tap.*\"} \u003e 0.8\n for: 1m\n labels:\n severity: warning\n annotations:\n summary: \"Host Network Interface Saturated (instance {{ $labels.instance }}).\"\n description: \"The network interface {{ $labels.interface }} on {{ $labels.instance }} is getting overloaded.\"\n - alert: HostSystemdServiceCrashed\n expr: node_systemd_unit_state{state=\"failed\"} == 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host SystemD service crashed (instance {{ $labels.instance }}).\"\n description: \"SystemD service crashed.\"\n - alert: HostEdacCorrectableErrorsDetected\n expr: increase(node_edac_correctable_errors_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: info\n annotations:\n summary: \"Host EDAC Correctable Errors detected (instance {{ $labels.instance }}).\"\n description: '{{ $labels.instance }} has had {{ printf \"%.0f\" $value }} correctable memory errors reported by EDAC in the last 5 minutes.'\n - alert: HostEdacUncorrectableErrorsDetected\n expr: node_edac_uncorrectable_errors_total \u003e 0\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host EDAC Uncorrectable Errors detected (instance {{ $labels.instance }}).\"\n description: '{{ $labels.instance }} has had {{ printf \"%.0f\" $value }} uncorrectable memory errors reported by EDAC in the last 5 minutes.'\n- name: \"Min.io\"\n rules:\n - alert: MinioDiskOffline\n expr: minio_offline_disks \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Minio disk offline (instance {{ $labels.instance }})\"\n description: \"Minio disk is offline.\"\n - alert: MinioStorageSpaceExhausted\n expr: minio_disk_storage_free_bytes / 1024 / 1024 / 1024 \u003c 10\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Minio storage space exhausted (instance {{ $labels.instance }}).\"\n description: \"Minio storage space is low (\u003c 10 GB).\"\n- name: \"Prometheus\"\n rules:\n - alert: PrometheusConfigurationReloadFailure\n expr: prometheus_config_last_reload_successful != 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus configuration reload failure (instance {{ $labels.instance }}).\"\n description: \"Prometheus configuration reload error.\"\n - alert: PrometheusTooManyRestarts\n expr: changes(process_start_time_seconds{job=~\"prometheus|pushgateway|alertmanager\"}[15m]) \u003e 2\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus too many restarts (instance {{ $labels.instance }}).\"\n description: \"Prometheus has restarted more than twice in the last 15 minutes. It might be crashlooping.\"\n - alert: PrometheusAlertmanagerConfigurationReloadFailure\n expr: alertmanager_config_last_reload_successful != 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus AlertManager configuration reload failure (instance {{ $labels.instance }}).\"\n description: \"AlertManager configuration reload error.\"\n - alert: PrometheusRuleEvaluationFailures\n expr: increase(prometheus_rule_evaluation_failures_total[3m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus rule evaluation failures (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} rule evaluation failures, leading to potentially ignored alerts.\"\n - alert: PrometheusTargetScrapingSlow\n expr: prometheus_target_interval_length_seconds{quantile=\"0.9\"} \u003e 60\n for: 5m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus target scraping slow (instance {{ $labels.instance }}).\"\n description: \"Prometheus is scraping exporters slowly.\"\n - alert: PrometheusTsdbCompactionsFailed\n expr: increase(prometheus_tsdb_compactions_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB compactions failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB compactions failures.\"\n - alert: PrometheusTsdbHeadTruncationsFailed\n expr: increase(prometheus_tsdb_head_truncations_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB head truncations failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB head truncation failures.\"\n - alert: PrometheusTsdbWalCorruptions\n expr: increase(prometheus_tsdb_wal_corruptions_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB WAL corruptions (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB WAL corruptions.\"\n - alert: PrometheusTsdbWalTruncationsFailed\n expr: increase(prometheus_tsdb_wal_truncations_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB WAL truncations failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB WAL truncation failures.\"\nEOH\n }\n\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/prometheus.yml\"\n data = \u003c\u003cEOH\n---\nglobal:\n scrape_interval: 5s\n scrape_timeout: 5s\n evaluation_interval: 5s\n\nalerting:\n alertmanagers:\n - consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'alertmanager' ]\n\nrule_files:\n - 'alerts.yml'\n\nscrape_configs:\n\n - job_name: 'Nomad Cluster'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'nomad-client', 'nomad' ]\n relabel_configs:\n - source_labels: [__meta_consul_tags]\n regex: '(.*)http(.*)'\n action: keep\n metrics_path: /v1/metrics\n params:\n format: [ 'prometheus' ]\n\n - job_name: 'Consul Cluster'\n static_configs:\n - targets: [ '10.30.51.28:8500' ]\n - targets: [ '10.30.51.29:8500' ]\n - targets: [ '10.30.51.30:8500' ]\n - targets: [ '10.30.51.32:8500' ]\n - targets: [ '10.30.51.33:8500' ]\n - targets: [ '10.30.51.34:8500' ]\n - targets: [ '10.30.51.35:8500' ]\n - targets: [ '10.30.51.39:8500' ]\n - targets: [ '10.30.51.40:8500' ]\n - targets: [ '10.30.51.50:8500' ]\n - targets: [ '10.30.51.51:8500' ]\n - targets: [ '10.30.51.65:8500' ]\n - targets: [ '10.30.51.66:8500' ]\n - targets: [ '10.30.51.67:8500' ]\n - targets: [ '10.30.51.68:8500' ]\n - targets: [ '10.30.51.70:8500' ]\n - targets: [ '10.30.51.71:8500' ]\n - targets: [ '10.32.8.14:8500' ]\n - targets: [ '10.32.8.15:8500' ]\n - targets: [ '10.32.8.16:8500' ]\n - targets: [ '10.32.8.17:8500' ]\n metrics_path: /v1/agent/metrics\n params:\n format: [ 'prometheus' ]\n\n - job_name: 'Blackbox Exporter (icmp)'\n static_configs:\n - targets: [ 'gerrit.fd.io' ]\n - targets: [ 'jenkins.fd.io' ]\n - targets: [ '10.30.51.32' ]\n params:\n module: [ 'icmp_v4' ]\n relabel_configs:\n - source_labels: [__address__]\n target_label: __param_target\n - source_labels: [__param_target]\n target_label: instance\n - target_label: __address__\n replacement: localhost:9115\n metrics_path: /probe\n\n - job_name: 'Blackbox Exporter (http)'\n static_configs:\n - targets: [ 'gerrit.fd.io' ]\n - targets: [ 'jenkins.fd.io' ]\n params:\n module: [ 'http_2xx' ]\n relabel_configs:\n - source_labels: [__address__]\n target_label: __param_target\n - source_labels: [__param_target]\n target_label: instance\n - target_label: __address__\n replacement: localhost:9115\n metrics_path: /probe\n\n - job_name: 'cAdvisor Exporter'\n static_configs:\n - targets: [ '10.30.51.28:8080' ]\n - targets: [ '10.30.51.29:8080' ]\n - targets: [ '10.30.51.30:8080' ]\n #- targets: [ '10.30.51.32:8080' ]\n - targets: [ '10.30.51.33:8080' ]\n - targets: [ '10.30.51.34:8080' ]\n - targets: [ '10.30.51.35:8080' ]\n - targets: [ '10.30.51.39:8080' ]\n - targets: [ '10.30.51.40:8080' ]\n - targets: [ '10.30.51.50:8080' ]\n - targets: [ '10.30.51.51:8080' ]\n - targets: [ '10.30.51.65:8080' ]\n - targets: [ '10.30.51.66:8080' ]\n - targets: [ '10.30.51.67:8080' ]\n - targets: [ '10.30.51.68:8080' ]\n - targets: [ '10.30.51.70:8080' ]\n - targets: [ '10.30.51.71:8080' ]\n - targets: [ '10.32.8.14:8080' ]\n - targets: [ '10.32.8.15:8080' ]\n - targets: [ '10.32.8.16:8080' ]\n - targets: [ '10.32.8.17:8080' ]\n\n - job_name: 'Jenkins Job Health Exporter'\n static_configs:\n - targets: [ '10.30.51.32:9186' ]\n metric_relabel_configs:\n - source_labels: [ __name__ ]\n regex: '^(vpp.*|csit.*)_(success|failure|total|unstable|reqtime_ms)$'\n action: replace\n replacement: '$1'\n target_label: id\n - source_labels: [ __name__ ]\n regex: '^(vpp.*|csit.*)_(success|failure|total|unstable|reqtime_ms)$'\n replacement: 'jenkins_job_$2'\n target_label: __name__\n\n - job_name: 'Node Exporter'\n static_configs:\n - targets: [ '10.30.51.28:9100' ]\n - targets: [ '10.30.51.29:9100' ]\n - targets: [ '10.30.51.30:9100' ]\n - targets: [ '10.30.51.32:9100' ]\n - targets: [ '10.30.51.33:9100' ]\n - targets: [ '10.30.51.34:9100' ]\n - targets: [ '10.30.51.35:9100' ]\n - targets: [ '10.30.51.39:9100' ]\n - targets: [ '10.30.51.40:9100' ]\n - targets: [ '10.30.51.50:9100' ]\n - targets: [ '10.30.51.51:9100' ]\n - targets: [ '10.30.51.65:9100' ]\n - targets: [ '10.30.51.66:9100' ]\n - targets: [ '10.30.51.67:9100' ]\n - targets: [ '10.30.51.68:9100' ]\n - targets: [ '10.30.51.70:9100' ]\n - targets: [ '10.30.51.71:9100' ]\n - targets: [ '10.32.8.14:9100' ]\n - targets: [ '10.32.8.15:9100' ]\n - targets: [ '10.32.8.16:9100' ]\n - targets: [ '10.32.8.17:9100' ]\n\n - job_name: 'Alertmanager'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'alertmanager' ]\n\n - job_name: 'Grafana'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'grafana' ]\n\n - job_name: 'Prometheus'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'prometheus' ]\n\n - job_name: 'Minio'\n bearer_token: eyJhbGciOiJIUzUxMiIsInR5cCI6IkpXVCJ9.eyJleHAiOjQ3NjQ1ODEzMzcsImlzcyI6InByb21ldGhldXMiLCJzdWIiOiJtaW5pbyJ9.oeTw3EIaiFmlDikrHXWiWXMH2vxLfDLkfjEC7G2N3M_keH_xyA_l2ofLLNYtopa_3GCEZnxLQdPuFZrmgpkDWg\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'storage' ]\n metrics_path: /minio/prometheus/metrics\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"prometheus\"\n port = \"prometheus\"\n tags = [ \"prometheus${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Prometheus Check Live\"\n type = \"http\"\n path = \"/-/healthy\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = 2000\n memory = 8192\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"prometheus\" {\n static = 9090\n }\n }\n }\n }\n }\n}",
- "template": "job \"${job_name}\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"${datacenters}\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n%{ if use_canary }\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n%{ endif }\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-${service_name}\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = ${group_count}\n\n # The volume stanza allows the group to specify that it requires a given\n # volume from the cluster.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/volume\n #\n %{ if use_host_volume }\n volume \"prod-volume1-${service_name}\" {\n type = \"host\"\n read_only = false\n source = \"${host_volume}\"\n }\n %{ endif }\n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"$${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-${service_name}\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"exec\"\n\n %{ if use_host_volume }\n volume_mount {\n volume = \"prod-volume1-${service_name}\"\n destination = \"${data_dir}\"\n read_only = false\n }\n %{ endif }\n\n %{ if use_vault_provider }\n vault {\n policies = \"${vault_kv_policy_name}\"\n }\n %{ endif }\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n command = \"local/prometheus-${version}.linux-amd64/prometheus\"\n args = [\n \"--config.file=secrets/prometheus.yml\",\n \"--storage.tsdb.path=${data_dir}prometheus/\",\n \"--storage.tsdb.retention.time=15d\"\n ]\n }\n\n # The artifact stanza instructs Nomad to fetch and unpack a remote resource,\n # such as a file, tarball, or binary. Nomad downloads artifacts using the\n # popular go-getter library, which permits downloading artifacts from a\n # variety of locations using a URL as the input source.\n #\n # For more information and examples on the \"artifact\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/artifact\n #\n artifact {\n source = \"${url}\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/alerts.yml\"\n left_delimiter = \"{{{\"\n right_delimiter = \"}}}\"\n data = \u003c\u003cEOH\n---\ngroups:\n- name: \"Jenkins Job Health Exporter\"\n rules:\n - alert: JenkinsJobHealthExporterFailures\n expr: jenkins_job_failure{id=~\".*\"} \u003e jenkins_job_success{id=~\".*\"}\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Jenkins Job Health detected high failure rate on jenkins jobs.\"\n description: \"Job: {{ $labels.id }}\"\n - alert: JenkinsJobHealthExporterUnstable\n expr: jenkins_job_unstable{id=~\".*\"} \u003e jenkins_job_success{id=~\".*\"}\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Jenkins Job Health detected high unstable rate on jenkins jobs.\"\n description: \"Job: {{ $labels.id }}\"\n- name: \"Consul\"\n rules:\n - alert: ConsulServiceHealthcheckFailed\n expr: consul_catalog_service_node_healthy == 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul service healthcheck failed (instance {{ $labels.instance }}).\"\n description: \"Service: `{{ $labels.service_name }}` Healthcheck: `{{ $labels.service_id }}`.\"\n - alert: ConsulMissingMasterNode\n expr: consul_raft_peers \u003c 3\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul missing master node (instance {{ $labels.instance }}).\"\n description: \"Numbers of consul raft peers should be 3, in order to preserve quorum.\"\n - alert: ConsulAgentUnhealthy\n expr: consul_health_node_status{status=\"critical\"} == 1\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul agent unhealthy (instance {{ $labels.instance }}).\"\n description: \"A Consul agent is down.\"\n- name: \"Hosts\"\n rules:\n - alert: NodeDown\n expr: up == 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus target missing (instance {{ $labels.instance }}).\"\n description: \"A Prometheus target has disappeared. An exporter might be crashed.\"\n - alert: HostHighCpuLoad\n expr: 100 - (avg by(instance) (rate(node_cpu_seconds_total{mode=\"idle\"}[5m])) * 100) \u003e 95\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host high CPU load (instance {{ $labels.instance }}).\"\n description: \"CPU load is \u003e 95%.\"\n - alert: HostOutOfMemory\n expr: node_memory_MemAvailable_bytes / node_memory_MemTotal_bytes * 100 \u003c 10\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host out of memory (instance {{ $labels.instance }}).\"\n description: \"Node memory is filling up (\u003c 10% left).\"\n - alert: HostOomKillDetected\n expr: increase(node_vmstat_oom_kill[1m]) \u003e 0\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host OOM kill detected (instance {{ $labels.instance }}).\"\n description: \"OOM kill detected.\"\n - alert: HostMemoryUnderMemoryPressure\n expr: rate(node_vmstat_pgmajfault[1m]) \u003e 1000\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host memory under memory pressure (instance {{ $labels.instance }}).\"\n description: \"The node is under heavy memory pressure. High rate of major page faults.\"\n - alert: HostOutOfDiskSpace\n expr: (node_filesystem_avail_bytes * 100) / node_filesystem_size_bytes \u003c 10 and ON (instance, device, mountpoint) node_filesystem_readonly == 0\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host out of disk space (instance {{ $labels.instance }}).\"\n description: \"Disk is almost full (\u003c 10% left).\"\n - alert: HostRaidDiskFailure\n expr: node_md_disks{state=\"failed\"} \u003e 0\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host RAID disk failure (instance {{ $labels.instance }}).\"\n description: \"At least one device in RAID array on {{ $labels.instance }} failed. Array {{ $labels.md_device }} needs attention and possibly a disk swap.\"\n - alert: HostConntrackLimit\n expr: node_nf_conntrack_entries / node_nf_conntrack_entries_limit \u003e 0.8\n for: 5m\n labels:\n severity: warning\n annotations:\n summary: \"Host conntrack limit (instance {{ $labels.instance }}).\"\n description: \"The number of conntrack is approching limit.\"\n - alert: HostNetworkInterfaceSaturated\n expr: (rate(node_network_receive_bytes_total{device!~\"^tap.*\"}[1m]) + rate(node_network_transmit_bytes_total{device!~\"^tap.*\"}[1m])) / node_network_speed_bytes{device!~\"^tap.*\"} \u003e 0.8\n for: 1m\n labels:\n severity: warning\n annotations:\n summary: \"Host Network Interface Saturated (instance {{ $labels.instance }}).\"\n description: \"The network interface {{ $labels.interface }} on {{ $labels.instance }} is getting overloaded.\"\n - alert: HostSystemdServiceCrashed\n expr: node_systemd_unit_state{state=\"failed\"} == 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host SystemD service crashed (instance {{ $labels.instance }}).\"\n description: \"SystemD service crashed.\"\n - alert: HostEdacCorrectableErrorsDetected\n expr: increase(node_edac_correctable_errors_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: info\n annotations:\n summary: \"Host EDAC Correctable Errors detected (instance {{ $labels.instance }}).\"\n description: '{{ $labels.instance }} has had {{ printf \"%.0f\" $value }} correctable memory errors reported by EDAC in the last 5 minutes.'\n - alert: HostEdacUncorrectableErrorsDetected\n expr: node_edac_uncorrectable_errors_total \u003e 0\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host EDAC Uncorrectable Errors detected (instance {{ $labels.instance }}).\"\n description: '{{ $labels.instance }} has had {{ printf \"%.0f\" $value }} uncorrectable memory errors reported by EDAC in the last 5 minutes.'\n- name: \"Min.io\"\n rules:\n - alert: MinioDiskOffline\n expr: minio_offline_disks \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Minio disk offline (instance {{ $labels.instance }})\"\n description: \"Minio disk is offline.\"\n - alert: MinioStorageSpaceExhausted\n expr: minio_disk_storage_free_bytes / 1024 / 1024 / 1024 \u003c 10\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Minio storage space exhausted (instance {{ $labels.instance }}).\"\n description: \"Minio storage space is low (\u003c 10 GB).\"\n- name: \"Prometheus\"\n rules:\n - alert: PrometheusConfigurationReloadFailure\n expr: prometheus_config_last_reload_successful != 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus configuration reload failure (instance {{ $labels.instance }}).\"\n description: \"Prometheus configuration reload error.\"\n - alert: PrometheusTooManyRestarts\n expr: changes(process_start_time_seconds{job=~\"prometheus|pushgateway|alertmanager\"}[15m]) \u003e 2\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus too many restarts (instance {{ $labels.instance }}).\"\n description: \"Prometheus has restarted more than twice in the last 15 minutes. It might be crashlooping.\"\n - alert: PrometheusAlertmanagerConfigurationReloadFailure\n expr: alertmanager_config_last_reload_successful != 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus AlertManager configuration reload failure (instance {{ $labels.instance }}).\"\n description: \"AlertManager configuration reload error.\"\n - alert: PrometheusRuleEvaluationFailures\n expr: increase(prometheus_rule_evaluation_failures_total[3m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus rule evaluation failures (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} rule evaluation failures, leading to potentially ignored alerts.\"\n - alert: PrometheusTargetScrapingSlow\n expr: prometheus_target_interval_length_seconds{quantile=\"0.9\"} \u003e 60\n for: 5m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus target scraping slow (instance {{ $labels.instance }}).\"\n description: \"Prometheus is scraping exporters slowly.\"\n - alert: PrometheusTsdbCompactionsFailed\n expr: increase(prometheus_tsdb_compactions_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB compactions failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB compactions failures.\"\n - alert: PrometheusTsdbHeadTruncationsFailed\n expr: increase(prometheus_tsdb_head_truncations_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB head truncations failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB head truncation failures.\"\n - alert: PrometheusTsdbWalCorruptions\n expr: increase(prometheus_tsdb_wal_corruptions_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB WAL corruptions (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB WAL corruptions.\"\n - alert: PrometheusTsdbWalTruncationsFailed\n expr: increase(prometheus_tsdb_wal_truncations_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB WAL truncations failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB WAL truncation failures.\"\nEOH\n }\n\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/prometheus.yml\"\n data = \u003c\u003cEOH\n---\nglobal:\n scrape_interval: 5s\n scrape_timeout: 5s\n evaluation_interval: 5s\n\nalerting:\n alertmanagers:\n - consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'alertmanager' ]\n\nrule_files:\n - 'alerts.yml'\n\nscrape_configs:\n\n - job_name: 'Nomad Cluster'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'nomad-client', 'nomad' ]\n relabel_configs:\n - source_labels: [__meta_consul_tags]\n regex: '(.*)http(.*)'\n action: keep\n metrics_path: /v1/metrics\n params:\n format: [ 'prometheus' ]\n\n - job_name: 'Consul Cluster'\n static_configs:\n - targets: [ '10.30.51.28:8500' ]\n - targets: [ '10.30.51.29:8500' ]\n - targets: [ '10.30.51.30:8500' ]\n - targets: [ '10.30.51.32:8500' ]\n - targets: [ '10.30.51.33:8500' ]\n - targets: [ '10.30.51.34:8500' ]\n - targets: [ '10.30.51.35:8500' ]\n - targets: [ '10.30.51.39:8500' ]\n - targets: [ '10.30.51.40:8500' ]\n - targets: [ '10.30.51.50:8500' ]\n - targets: [ '10.30.51.51:8500' ]\n - targets: [ '10.30.51.65:8500' ]\n - targets: [ '10.30.51.66:8500' ]\n - targets: [ '10.30.51.67:8500' ]\n - targets: [ '10.30.51.68:8500' ]\n - targets: [ '10.30.51.70:8500' ]\n - targets: [ '10.30.51.71:8500' ]\n - targets: [ '10.32.8.14:8500' ]\n - targets: [ '10.32.8.15:8500' ]\n - targets: [ '10.32.8.16:8500' ]\n - targets: [ '10.32.8.17:8500' ]\n metrics_path: /v1/agent/metrics\n params:\n format: [ 'prometheus' ]\n\n - job_name: 'Blackbox Exporter (icmp)'\n static_configs:\n - targets: [ 'gerrit.fd.io' ]\n - targets: [ 'jenkins.fd.io' ]\n - targets: [ '10.30.51.32' ]\n params:\n module: [ 'icmp_v4' ]\n relabel_configs:\n - source_labels: [__address__]\n target_label: __param_target\n - source_labels: [__param_target]\n target_label: instance\n - target_label: __address__\n replacement: localhost:9115\n metrics_path: /probe\n\n - job_name: 'Blackbox Exporter (http)'\n static_configs:\n - targets: [ 'gerrit.fd.io' ]\n - targets: [ 'jenkins.fd.io' ]\n params:\n module: [ 'http_2xx' ]\n relabel_configs:\n - source_labels: [__address__]\n target_label: __param_target\n - source_labels: [__param_target]\n target_label: instance\n - target_label: __address__\n replacement: localhost:9115\n metrics_path: /probe\n\n - job_name: 'cAdvisor Exporter'\n static_configs:\n - targets: [ '10.30.51.28:8080' ]\n - targets: [ '10.30.51.29:8080' ]\n - targets: [ '10.30.51.30:8080' ]\n #- targets: [ '10.30.51.32:8080' ]\n - targets: [ '10.30.51.33:8080' ]\n - targets: [ '10.30.51.34:8080' ]\n - targets: [ '10.30.51.35:8080' ]\n - targets: [ '10.30.51.39:8080' ]\n - targets: [ '10.30.51.40:8080' ]\n - targets: [ '10.30.51.50:8080' ]\n - targets: [ '10.30.51.51:8080' ]\n - targets: [ '10.30.51.65:8080' ]\n - targets: [ '10.30.51.66:8080' ]\n - targets: [ '10.30.51.67:8080' ]\n - targets: [ '10.30.51.68:8080' ]\n - targets: [ '10.30.51.70:8080' ]\n - targets: [ '10.30.51.71:8080' ]\n - targets: [ '10.32.8.14:8080' ]\n - targets: [ '10.32.8.15:8080' ]\n - targets: [ '10.32.8.16:8080' ]\n - targets: [ '10.32.8.17:8080' ]\n\n - job_name: 'Jenkins Job Health Exporter'\n static_configs:\n - targets: [ '10.30.51.32:9186' ]\n metric_relabel_configs:\n - source_labels: [ __name__ ]\n regex: '^(vpp.*|csit.*)_(success|failure|total|unstable|reqtime_ms)$'\n action: replace\n replacement: '$1'\n target_label: id\n - source_labels: [ __name__ ]\n regex: '^(vpp.*|csit.*)_(success|failure|total|unstable|reqtime_ms)$'\n replacement: 'jenkins_job_$2'\n target_label: __name__\n\n - job_name: 'Node Exporter'\n static_configs:\n - targets: [ '10.30.51.28:9100' ]\n - targets: [ '10.30.51.29:9100' ]\n - targets: [ '10.30.51.30:9100' ]\n - targets: [ '10.30.51.32:9100' ]\n - targets: [ '10.30.51.33:9100' ]\n - targets: [ '10.30.51.34:9100' ]\n - targets: [ '10.30.51.35:9100' ]\n - targets: [ '10.30.51.39:9100' ]\n - targets: [ '10.30.51.40:9100' ]\n - targets: [ '10.30.51.50:9100' ]\n - targets: [ '10.30.51.51:9100' ]\n - targets: [ '10.30.51.65:9100' ]\n - targets: [ '10.30.51.66:9100' ]\n - targets: [ '10.30.51.67:9100' ]\n - targets: [ '10.30.51.68:9100' ]\n - targets: [ '10.30.51.70:9100' ]\n - targets: [ '10.30.51.71:9100' ]\n - targets: [ '10.32.8.14:9100' ]\n - targets: [ '10.32.8.15:9100' ]\n - targets: [ '10.32.8.16:9100' ]\n - targets: [ '10.32.8.17:9100' ]\n\n - job_name: 'Alertmanager'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'alertmanager' ]\n\n - job_name: 'Grafana'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'grafana' ]\n\n - job_name: 'Prometheus'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'prometheus' ]\n\n - job_name: 'Minio'\n bearer_token: eyJhbGciOiJIUzUxMiIsInR5cCI6IkpXVCJ9.eyJleHAiOjQ3NjQ1ODEzMzcsImlzcyI6InByb21ldGhldXMiLCJzdWIiOiJtaW5pbyJ9.oeTw3EIaiFmlDikrHXWiWXMH2vxLfDLkfjEC7G2N3M_keH_xyA_l2ofLLNYtopa_3GCEZnxLQdPuFZrmgpkDWg\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'storage' ]\n metrics_path: /minio/prometheus/metrics\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"${service_name}\"\n port = \"${service_name}\"\n tags = [ \"${service_name}$${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Prometheus Check Live\"\n type = \"http\"\n path = \"/-/healthy\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = ${cpu}\n memory = ${mem}\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"${service_name}\" {\n static = ${port}\n }\n }\n }\n }\n }\n}",
+ "id": "113240c48bda39b1664958a0b9fb6058f6e613ae612cc61ff958d1a78c94c46b",
+ "rendered": "job \"prod-prometheus\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n\n }\n\n # The reschedule stanza specifies the group's rescheduling strategy. If\n # specified at the job level, the configuration will apply to all groups\n # within the job. If the reschedule stanza is present on both the job and the\n # group, they are merged with the group stanza taking the highest precedence\n # and then the job.\n reschedule {\n delay = \"30s\"\n delay_function = \"constant\"\n unlimited = true\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-prometheus\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 4\n\n # The restart stanza configures a tasks's behavior on task failure. Restarts\n # happen on the client that is running the task.\n #\n # https://www.nomadproject.io/docs/job-specification/restart\n #\n restart {\n interval = \"30m\"\n attempts = 40\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The volume stanza allows the group to specify that it requires a given\n # volume from the cluster.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/volume\n #\n \n volume \"prod-volume1-prometheus\" {\n type = \"host\"\n read_only = false\n source = \"prod-volume-data1-1\"\n }\n \n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-prometheus\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"exec\"\n\n \n volume_mount {\n volume = \"prod-volume1-prometheus\"\n destination = \"/data/\"\n read_only = false\n }\n \n\n \n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n command = \"local/prometheus-2.24.0.linux-amd64/prometheus\"\n args = [\n \"--config.file=secrets/prometheus.yml\",\n \"--storage.tsdb.path=/data/prometheus/\",\n \"--storage.tsdb.retention.time=15d\"\n ]\n }\n\n # The artifact stanza instructs Nomad to fetch and unpack a remote resource,\n # such as a file, tarball, or binary. Nomad downloads artifacts using the\n # popular go-getter library, which permits downloading artifacts from a\n # variety of locations using a URL as the input source.\n #\n # For more information and examples on the \"artifact\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/artifact\n #\n artifact {\n source = \"https://github.com/prometheus/prometheus/releases/download/v2.24.0/prometheus-2.24.0.linux-amd64.tar.gz\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/alerts.yml\"\n left_delimiter = \"{{{\"\n right_delimiter = \"}}}\"\n data = \u003c\u003cEOH\n---\ngroups:\n- name: \"Jenkins Job Health Exporter\"\n rules:\n - alert: JenkinsJobHealthExporterFailures\n expr: jenkins_job_failure{id=~\".*\"} \u003e jenkins_job_success{id=~\".*\"}\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Jenkins Job Health detected high failure rate on jenkins jobs.\"\n description: \"Job: {{ $labels.id }}\"\n - alert: JenkinsJobHealthExporterUnstable\n expr: jenkins_job_unstable{id=~\".*\"} \u003e jenkins_job_success{id=~\".*\"}\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Jenkins Job Health detected high unstable rate on jenkins jobs.\"\n description: \"Job: {{ $labels.id }}\"\n- name: \"Consul\"\n rules:\n - alert: ConsulServiceHealthcheckFailed\n expr: consul_catalog_service_node_healthy == 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul service healthcheck failed (instance {{ $labels.instance }}).\"\n description: \"Service: `{{ $labels.service_name }}` Healthcheck: `{{ $labels.service_id }}`.\"\n - alert: ConsulMissingMasterNode\n expr: consul_raft_peers \u003c 3\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul missing master node (instance {{ $labels.instance }}).\"\n description: \"Numbers of consul raft peers should be 3, in order to preserve quorum.\"\n - alert: ConsulAgentUnhealthy\n expr: consul_health_node_status{status=\"critical\"} == 1\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul agent unhealthy (instance {{ $labels.instance }}).\"\n description: \"A Consul agent is down.\"\n- name: \"Hosts\"\n rules:\n - alert: NodeDown\n expr: up == 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus target missing (instance {{ $labels.instance }}).\"\n description: \"A Prometheus target has disappeared. An exporter might be crashed.\"\n - alert: HostHighCpuLoad\n expr: 100 - (avg by(instance) (rate(node_cpu_seconds_total{mode=\"idle\"}[5m])) * 100) \u003e 95\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host high CPU load (instance {{ $labels.instance }}).\"\n description: \"CPU load is \u003e 95%.\"\n - alert: HostOutOfMemory\n expr: node_memory_MemAvailable_bytes / node_memory_MemTotal_bytes * 100 \u003c 10\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host out of memory (instance {{ $labels.instance }}).\"\n description: \"Node memory is filling up (\u003c 10% left).\"\n - alert: HostOomKillDetected\n expr: increase(node_vmstat_oom_kill[1m]) \u003e 0\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host OOM kill detected (instance {{ $labels.instance }}).\"\n description: \"OOM kill detected.\"\n - alert: HostMemoryUnderMemoryPressure\n expr: rate(node_vmstat_pgmajfault[1m]) \u003e 1000\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host memory under memory pressure (instance {{ $labels.instance }}).\"\n description: \"The node is under heavy memory pressure. High rate of major page faults.\"\n - alert: HostOutOfDiskSpace\n expr: (node_filesystem_avail_bytes * 100) / node_filesystem_size_bytes \u003c 10 and ON (instance, device, mountpoint) node_filesystem_readonly == 0\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host out of disk space (instance {{ $labels.instance }}).\"\n description: \"Disk is almost full (\u003c 10% left).\"\n - alert: HostRaidDiskFailure\n expr: node_md_disks{state=\"failed\"} \u003e 0\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host RAID disk failure (instance {{ $labels.instance }}).\"\n description: \"At least one device in RAID array on {{ $labels.instance }} failed. Array {{ $labels.md_device }} needs attention and possibly a disk swap.\"\n - alert: HostConntrackLimit\n expr: node_nf_conntrack_entries / node_nf_conntrack_entries_limit \u003e 0.8\n for: 5m\n labels:\n severity: warning\n annotations:\n summary: \"Host conntrack limit (instance {{ $labels.instance }}).\"\n description: \"The number of conntrack is approching limit.\"\n - alert: HostNetworkInterfaceSaturated\n expr: (rate(node_network_receive_bytes_total{device!~\"^tap.*\"}[1m]) + rate(node_network_transmit_bytes_total{device!~\"^tap.*\"}[1m])) / node_network_speed_bytes{device!~\"^tap.*\"} \u003e 0.8\n for: 1m\n labels:\n severity: warning\n annotations:\n summary: \"Host Network Interface Saturated (instance {{ $labels.instance }}).\"\n description: \"The network interface {{ $labels.interface }} on {{ $labels.instance }} is getting overloaded.\"\n - alert: HostSystemdServiceCrashed\n expr: node_systemd_unit_state{state=\"failed\"} == 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host SystemD service crashed (instance {{ $labels.instance }}).\"\n description: \"SystemD service crashed.\"\n - alert: HostEdacCorrectableErrorsDetected\n expr: increase(node_edac_correctable_errors_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: info\n annotations:\n summary: \"Host EDAC Correctable Errors detected (instance {{ $labels.instance }}).\"\n description: '{{ $labels.instance }} has had {{ printf \"%.0f\" $value }} correctable memory errors reported by EDAC in the last 5 minutes.'\n - alert: HostEdacUncorrectableErrorsDetected\n expr: node_edac_uncorrectable_errors_total \u003e 0\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host EDAC Uncorrectable Errors detected (instance {{ $labels.instance }}).\"\n description: '{{ $labels.instance }} has had {{ printf \"%.0f\" $value }} uncorrectable memory errors reported by EDAC in the last 5 minutes.'\n- name: \"Min.io\"\n rules:\n - alert: MinioDiskOffline\n expr: minio_offline_disks \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Minio disk offline (instance {{ $labels.instance }})\"\n description: \"Minio disk is offline.\"\n - alert: MinioStorageSpaceExhausted\n expr: minio_disk_storage_free_bytes / 1024 / 1024 / 1024 \u003c 10\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Minio storage space exhausted (instance {{ $labels.instance }}).\"\n description: \"Minio storage space is low (\u003c 10 GB).\"\n- name: \"Prometheus\"\n rules:\n - alert: PrometheusConfigurationReloadFailure\n expr: prometheus_config_last_reload_successful != 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus configuration reload failure (instance {{ $labels.instance }}).\"\n description: \"Prometheus configuration reload error.\"\n - alert: PrometheusTooManyRestarts\n expr: changes(process_start_time_seconds{job=~\"prometheus|pushgateway|alertmanager\"}[15m]) \u003e 2\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus too many restarts (instance {{ $labels.instance }}).\"\n description: \"Prometheus has restarted more than twice in the last 15 minutes. It might be crashlooping.\"\n - alert: PrometheusAlertmanagerConfigurationReloadFailure\n expr: alertmanager_config_last_reload_successful != 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus AlertManager configuration reload failure (instance {{ $labels.instance }}).\"\n description: \"AlertManager configuration reload error.\"\n - alert: PrometheusRuleEvaluationFailures\n expr: increase(prometheus_rule_evaluation_failures_total[3m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus rule evaluation failures (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} rule evaluation failures, leading to potentially ignored alerts.\"\n - alert: PrometheusTargetScrapingSlow\n expr: prometheus_target_interval_length_seconds{quantile=\"0.9\"} \u003e 60\n for: 5m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus target scraping slow (instance {{ $labels.instance }}).\"\n description: \"Prometheus is scraping exporters slowly.\"\n - alert: PrometheusTsdbCompactionsFailed\n expr: increase(prometheus_tsdb_compactions_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB compactions failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB compactions failures.\"\n - alert: PrometheusTsdbHeadTruncationsFailed\n expr: increase(prometheus_tsdb_head_truncations_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB head truncations failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB head truncation failures.\"\n - alert: PrometheusTsdbWalCorruptions\n expr: increase(prometheus_tsdb_wal_corruptions_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB WAL corruptions (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB WAL corruptions.\"\n - alert: PrometheusTsdbWalTruncationsFailed\n expr: increase(prometheus_tsdb_wal_truncations_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB WAL truncations failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB WAL truncation failures.\"\nEOH\n }\n\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/prometheus.yml\"\n data = \u003c\u003cEOH\n---\nglobal:\n scrape_interval: 5s\n scrape_timeout: 5s\n evaluation_interval: 5s\n\nalerting:\n alertmanagers:\n - consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'alertmanager' ]\n\nrule_files:\n - 'alerts.yml'\n\nscrape_configs:\n\n - job_name: 'Nomad Cluster'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'nomad-client', 'nomad' ]\n relabel_configs:\n - source_labels: [__meta_consul_tags]\n regex: '(.*)http(.*)'\n action: keep\n metrics_path: /v1/metrics\n params:\n format: [ 'prometheus' ]\n\n - job_name: 'Consul Cluster'\n static_configs:\n - targets: [ '10.30.51.28:8500' ]\n - targets: [ '10.30.51.29:8500' ]\n - targets: [ '10.30.51.30:8500' ]\n - targets: [ '10.30.51.32:8500' ]\n - targets: [ '10.30.51.33:8500' ]\n - targets: [ '10.30.51.34:8500' ]\n - targets: [ '10.30.51.35:8500' ]\n - targets: [ '10.30.51.39:8500' ]\n - targets: [ '10.30.51.40:8500' ]\n - targets: [ '10.30.51.50:8500' ]\n - targets: [ '10.30.51.51:8500' ]\n - targets: [ '10.30.51.65:8500' ]\n - targets: [ '10.30.51.66:8500' ]\n - targets: [ '10.30.51.67:8500' ]\n - targets: [ '10.30.51.68:8500' ]\n - targets: [ '10.30.51.70:8500' ]\n - targets: [ '10.30.51.71:8500' ]\n - targets: [ '10.32.8.14:8500' ]\n - targets: [ '10.32.8.15:8500' ]\n - targets: [ '10.32.8.16:8500' ]\n - targets: [ '10.32.8.17:8500' ]\n metrics_path: /v1/agent/metrics\n params:\n format: [ 'prometheus' ]\n\n - job_name: 'Blackbox Exporter (icmp)'\n static_configs:\n - targets: [ 'gerrit.fd.io' ]\n - targets: [ 'jenkins.fd.io' ]\n - targets: [ '10.30.51.32' ]\n params:\n module: [ 'icmp_v4' ]\n relabel_configs:\n - source_labels: [__address__]\n target_label: __param_target\n - source_labels: [__param_target]\n target_label: instance\n - target_label: __address__\n replacement: localhost:9115\n metrics_path: /probe\n\n - job_name: 'Blackbox Exporter (http)'\n static_configs:\n - targets: [ 'gerrit.fd.io' ]\n - targets: [ 'jenkins.fd.io' ]\n params:\n module: [ 'http_2xx' ]\n relabel_configs:\n - source_labels: [__address__]\n target_label: __param_target\n - source_labels: [__param_target]\n target_label: instance\n - target_label: __address__\n replacement: localhost:9115\n metrics_path: /probe\n\n - job_name: 'cAdvisor Exporter'\n static_configs:\n - targets: [ '10.30.51.28:8080' ]\n - targets: [ '10.30.51.29:8080' ]\n - targets: [ '10.30.51.30:8080' ]\n #- targets: [ '10.30.51.32:8080' ]\n - targets: [ '10.30.51.33:8080' ]\n - targets: [ '10.30.51.34:8080' ]\n - targets: [ '10.30.51.35:8080' ]\n - targets: [ '10.30.51.39:8080' ]\n - targets: [ '10.30.51.40:8080' ]\n - targets: [ '10.30.51.50:8080' ]\n - targets: [ '10.30.51.51:8080' ]\n - targets: [ '10.30.51.65:8080' ]\n - targets: [ '10.30.51.66:8080' ]\n - targets: [ '10.30.51.67:8080' ]\n - targets: [ '10.30.51.68:8080' ]\n - targets: [ '10.30.51.70:8080' ]\n - targets: [ '10.30.51.71:8080' ]\n - targets: [ '10.32.8.14:8080' ]\n - targets: [ '10.32.8.15:8080' ]\n - targets: [ '10.32.8.16:8080' ]\n - targets: [ '10.32.8.17:8080' ]\n\n - job_name: 'Jenkins Job Health Exporter'\n static_configs:\n - targets: [ '10.30.51.32:9186' ]\n metric_relabel_configs:\n - source_labels: [ __name__ ]\n regex: '^(vpp.*|csit.*)_(success|failure|total|unstable|reqtime_ms)$'\n action: replace\n replacement: '$1'\n target_label: id\n - source_labels: [ __name__ ]\n regex: '^(vpp.*|csit.*)_(success|failure|total|unstable|reqtime_ms)$'\n replacement: 'jenkins_job_$2'\n target_label: __name__\n\n - job_name: 'Node Exporter'\n static_configs:\n - targets: [ '10.30.51.28:9100' ]\n - targets: [ '10.30.51.29:9100' ]\n - targets: [ '10.30.51.30:9100' ]\n - targets: [ '10.30.51.32:9100' ]\n - targets: [ '10.30.51.33:9100' ]\n - targets: [ '10.30.51.34:9100' ]\n - targets: [ '10.30.51.35:9100' ]\n - targets: [ '10.30.51.39:9100' ]\n - targets: [ '10.30.51.40:9100' ]\n - targets: [ '10.30.51.50:9100' ]\n - targets: [ '10.30.51.51:9100' ]\n - targets: [ '10.30.51.65:9100' ]\n - targets: [ '10.30.51.66:9100' ]\n - targets: [ '10.30.51.67:9100' ]\n - targets: [ '10.30.51.68:9100' ]\n - targets: [ '10.30.51.70:9100' ]\n - targets: [ '10.30.51.71:9100' ]\n - targets: [ '10.32.8.14:9100' ]\n - targets: [ '10.32.8.15:9100' ]\n - targets: [ '10.32.8.16:9100' ]\n - targets: [ '10.32.8.17:9100' ]\n\n - job_name: 'Alertmanager'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'alertmanager' ]\n\n - job_name: 'Grafana'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'grafana' ]\n\n - job_name: 'Prometheus'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'prometheus' ]\n\n - job_name: 'Minio'\n bearer_token: eyJhbGciOiJIUzUxMiIsInR5cCI6IkpXVCJ9.eyJleHAiOjQ3NjQ1ODEzMzcsImlzcyI6InByb21ldGhldXMiLCJzdWIiOiJtaW5pbyJ9.oeTw3EIaiFmlDikrHXWiWXMH2vxLfDLkfjEC7G2N3M_keH_xyA_l2ofLLNYtopa_3GCEZnxLQdPuFZrmgpkDWg\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'storage' ]\n metrics_path: /minio/prometheus/metrics\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"prometheus\"\n port = \"prometheus\"\n tags = [ \"prometheus${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Prometheus Check Live\"\n type = \"http\"\n path = \"/-/healthy\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = 2000\n memory = 8192\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"prometheus\" {\n static = 9090\n }\n }\n }\n }\n }\n}",
+ "template": "job \"${job_name}\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"${datacenters}\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n%{ if use_canary }\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n%{ endif }\n }\n\n # The reschedule stanza specifies the group's rescheduling strategy. If\n # specified at the job level, the configuration will apply to all groups\n # within the job. If the reschedule stanza is present on both the job and the\n # group, they are merged with the group stanza taking the highest precedence\n # and then the job.\n reschedule {\n delay = \"30s\"\n delay_function = \"constant\"\n unlimited = true\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-${service_name}\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = ${group_count}\n\n # The restart stanza configures a tasks's behavior on task failure. Restarts\n # happen on the client that is running the task.\n #\n # https://www.nomadproject.io/docs/job-specification/restart\n #\n restart {\n interval = \"30m\"\n attempts = 40\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The volume stanza allows the group to specify that it requires a given\n # volume from the cluster.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/volume\n #\n %{ if use_host_volume }\n volume \"prod-volume1-${service_name}\" {\n type = \"host\"\n read_only = false\n source = \"${host_volume}\"\n }\n %{ endif }\n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"$${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-${service_name}\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"exec\"\n\n %{ if use_host_volume }\n volume_mount {\n volume = \"prod-volume1-${service_name}\"\n destination = \"${data_dir}\"\n read_only = false\n }\n %{ endif }\n\n %{ if use_vault_provider }\n vault {\n policies = \"${vault_kv_policy_name}\"\n }\n %{ endif }\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n command = \"local/prometheus-${version}.linux-amd64/prometheus\"\n args = [\n \"--config.file=secrets/prometheus.yml\",\n \"--storage.tsdb.path=${data_dir}prometheus/\",\n \"--storage.tsdb.retention.time=15d\"\n ]\n }\n\n # The artifact stanza instructs Nomad to fetch and unpack a remote resource,\n # such as a file, tarball, or binary. Nomad downloads artifacts using the\n # popular go-getter library, which permits downloading artifacts from a\n # variety of locations using a URL as the input source.\n #\n # For more information and examples on the \"artifact\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/artifact\n #\n artifact {\n source = \"${url}\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/alerts.yml\"\n left_delimiter = \"{{{\"\n right_delimiter = \"}}}\"\n data = \u003c\u003cEOH\n---\ngroups:\n- name: \"Jenkins Job Health Exporter\"\n rules:\n - alert: JenkinsJobHealthExporterFailures\n expr: jenkins_job_failure{id=~\".*\"} \u003e jenkins_job_success{id=~\".*\"}\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Jenkins Job Health detected high failure rate on jenkins jobs.\"\n description: \"Job: {{ $labels.id }}\"\n - alert: JenkinsJobHealthExporterUnstable\n expr: jenkins_job_unstable{id=~\".*\"} \u003e jenkins_job_success{id=~\".*\"}\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Jenkins Job Health detected high unstable rate on jenkins jobs.\"\n description: \"Job: {{ $labels.id }}\"\n- name: \"Consul\"\n rules:\n - alert: ConsulServiceHealthcheckFailed\n expr: consul_catalog_service_node_healthy == 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul service healthcheck failed (instance {{ $labels.instance }}).\"\n description: \"Service: `{{ $labels.service_name }}` Healthcheck: `{{ $labels.service_id }}`.\"\n - alert: ConsulMissingMasterNode\n expr: consul_raft_peers \u003c 3\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul missing master node (instance {{ $labels.instance }}).\"\n description: \"Numbers of consul raft peers should be 3, in order to preserve quorum.\"\n - alert: ConsulAgentUnhealthy\n expr: consul_health_node_status{status=\"critical\"} == 1\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul agent unhealthy (instance {{ $labels.instance }}).\"\n description: \"A Consul agent is down.\"\n- name: \"Hosts\"\n rules:\n - alert: NodeDown\n expr: up == 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus target missing (instance {{ $labels.instance }}).\"\n description: \"A Prometheus target has disappeared. An exporter might be crashed.\"\n - alert: HostHighCpuLoad\n expr: 100 - (avg by(instance) (rate(node_cpu_seconds_total{mode=\"idle\"}[5m])) * 100) \u003e 95\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host high CPU load (instance {{ $labels.instance }}).\"\n description: \"CPU load is \u003e 95%.\"\n - alert: HostOutOfMemory\n expr: node_memory_MemAvailable_bytes / node_memory_MemTotal_bytes * 100 \u003c 10\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host out of memory (instance {{ $labels.instance }}).\"\n description: \"Node memory is filling up (\u003c 10% left).\"\n - alert: HostOomKillDetected\n expr: increase(node_vmstat_oom_kill[1m]) \u003e 0\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host OOM kill detected (instance {{ $labels.instance }}).\"\n description: \"OOM kill detected.\"\n - alert: HostMemoryUnderMemoryPressure\n expr: rate(node_vmstat_pgmajfault[1m]) \u003e 1000\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host memory under memory pressure (instance {{ $labels.instance }}).\"\n description: \"The node is under heavy memory pressure. High rate of major page faults.\"\n - alert: HostOutOfDiskSpace\n expr: (node_filesystem_avail_bytes * 100) / node_filesystem_size_bytes \u003c 10 and ON (instance, device, mountpoint) node_filesystem_readonly == 0\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host out of disk space (instance {{ $labels.instance }}).\"\n description: \"Disk is almost full (\u003c 10% left).\"\n - alert: HostRaidDiskFailure\n expr: node_md_disks{state=\"failed\"} \u003e 0\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host RAID disk failure (instance {{ $labels.instance }}).\"\n description: \"At least one device in RAID array on {{ $labels.instance }} failed. Array {{ $labels.md_device }} needs attention and possibly a disk swap.\"\n - alert: HostConntrackLimit\n expr: node_nf_conntrack_entries / node_nf_conntrack_entries_limit \u003e 0.8\n for: 5m\n labels:\n severity: warning\n annotations:\n summary: \"Host conntrack limit (instance {{ $labels.instance }}).\"\n description: \"The number of conntrack is approching limit.\"\n - alert: HostNetworkInterfaceSaturated\n expr: (rate(node_network_receive_bytes_total{device!~\"^tap.*\"}[1m]) + rate(node_network_transmit_bytes_total{device!~\"^tap.*\"}[1m])) / node_network_speed_bytes{device!~\"^tap.*\"} \u003e 0.8\n for: 1m\n labels:\n severity: warning\n annotations:\n summary: \"Host Network Interface Saturated (instance {{ $labels.instance }}).\"\n description: \"The network interface {{ $labels.interface }} on {{ $labels.instance }} is getting overloaded.\"\n - alert: HostSystemdServiceCrashed\n expr: node_systemd_unit_state{state=\"failed\"} == 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host SystemD service crashed (instance {{ $labels.instance }}).\"\n description: \"SystemD service crashed.\"\n - alert: HostEdacCorrectableErrorsDetected\n expr: increase(node_edac_correctable_errors_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: info\n annotations:\n summary: \"Host EDAC Correctable Errors detected (instance {{ $labels.instance }}).\"\n description: '{{ $labels.instance }} has had {{ printf \"%.0f\" $value }} correctable memory errors reported by EDAC in the last 5 minutes.'\n - alert: HostEdacUncorrectableErrorsDetected\n expr: node_edac_uncorrectable_errors_total \u003e 0\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host EDAC Uncorrectable Errors detected (instance {{ $labels.instance }}).\"\n description: '{{ $labels.instance }} has had {{ printf \"%.0f\" $value }} uncorrectable memory errors reported by EDAC in the last 5 minutes.'\n- name: \"Min.io\"\n rules:\n - alert: MinioDiskOffline\n expr: minio_offline_disks \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Minio disk offline (instance {{ $labels.instance }})\"\n description: \"Minio disk is offline.\"\n - alert: MinioStorageSpaceExhausted\n expr: minio_disk_storage_free_bytes / 1024 / 1024 / 1024 \u003c 10\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Minio storage space exhausted (instance {{ $labels.instance }}).\"\n description: \"Minio storage space is low (\u003c 10 GB).\"\n- name: \"Prometheus\"\n rules:\n - alert: PrometheusConfigurationReloadFailure\n expr: prometheus_config_last_reload_successful != 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus configuration reload failure (instance {{ $labels.instance }}).\"\n description: \"Prometheus configuration reload error.\"\n - alert: PrometheusTooManyRestarts\n expr: changes(process_start_time_seconds{job=~\"prometheus|pushgateway|alertmanager\"}[15m]) \u003e 2\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus too many restarts (instance {{ $labels.instance }}).\"\n description: \"Prometheus has restarted more than twice in the last 15 minutes. It might be crashlooping.\"\n - alert: PrometheusAlertmanagerConfigurationReloadFailure\n expr: alertmanager_config_last_reload_successful != 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus AlertManager configuration reload failure (instance {{ $labels.instance }}).\"\n description: \"AlertManager configuration reload error.\"\n - alert: PrometheusRuleEvaluationFailures\n expr: increase(prometheus_rule_evaluation_failures_total[3m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus rule evaluation failures (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} rule evaluation failures, leading to potentially ignored alerts.\"\n - alert: PrometheusTargetScrapingSlow\n expr: prometheus_target_interval_length_seconds{quantile=\"0.9\"} \u003e 60\n for: 5m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus target scraping slow (instance {{ $labels.instance }}).\"\n description: \"Prometheus is scraping exporters slowly.\"\n - alert: PrometheusTsdbCompactionsFailed\n expr: increase(prometheus_tsdb_compactions_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB compactions failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB compactions failures.\"\n - alert: PrometheusTsdbHeadTruncationsFailed\n expr: increase(prometheus_tsdb_head_truncations_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB head truncations failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB head truncation failures.\"\n - alert: PrometheusTsdbWalCorruptions\n expr: increase(prometheus_tsdb_wal_corruptions_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB WAL corruptions (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB WAL corruptions.\"\n - alert: PrometheusTsdbWalTruncationsFailed\n expr: increase(prometheus_tsdb_wal_truncations_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB WAL truncations failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB WAL truncation failures.\"\nEOH\n }\n\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/prometheus.yml\"\n data = \u003c\u003cEOH\n---\nglobal:\n scrape_interval: 5s\n scrape_timeout: 5s\n evaluation_interval: 5s\n\nalerting:\n alertmanagers:\n - consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'alertmanager' ]\n\nrule_files:\n - 'alerts.yml'\n\nscrape_configs:\n\n - job_name: 'Nomad Cluster'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'nomad-client', 'nomad' ]\n relabel_configs:\n - source_labels: [__meta_consul_tags]\n regex: '(.*)http(.*)'\n action: keep\n metrics_path: /v1/metrics\n params:\n format: [ 'prometheus' ]\n\n - job_name: 'Consul Cluster'\n static_configs:\n - targets: [ '10.30.51.28:8500' ]\n - targets: [ '10.30.51.29:8500' ]\n - targets: [ '10.30.51.30:8500' ]\n - targets: [ '10.30.51.32:8500' ]\n - targets: [ '10.30.51.33:8500' ]\n - targets: [ '10.30.51.34:8500' ]\n - targets: [ '10.30.51.35:8500' ]\n - targets: [ '10.30.51.39:8500' ]\n - targets: [ '10.30.51.40:8500' ]\n - targets: [ '10.30.51.50:8500' ]\n - targets: [ '10.30.51.51:8500' ]\n - targets: [ '10.30.51.65:8500' ]\n - targets: [ '10.30.51.66:8500' ]\n - targets: [ '10.30.51.67:8500' ]\n - targets: [ '10.30.51.68:8500' ]\n - targets: [ '10.30.51.70:8500' ]\n - targets: [ '10.30.51.71:8500' ]\n - targets: [ '10.32.8.14:8500' ]\n - targets: [ '10.32.8.15:8500' ]\n - targets: [ '10.32.8.16:8500' ]\n - targets: [ '10.32.8.17:8500' ]\n metrics_path: /v1/agent/metrics\n params:\n format: [ 'prometheus' ]\n\n - job_name: 'Blackbox Exporter (icmp)'\n static_configs:\n - targets: [ 'gerrit.fd.io' ]\n - targets: [ 'jenkins.fd.io' ]\n - targets: [ '10.30.51.32' ]\n params:\n module: [ 'icmp_v4' ]\n relabel_configs:\n - source_labels: [__address__]\n target_label: __param_target\n - source_labels: [__param_target]\n target_label: instance\n - target_label: __address__\n replacement: localhost:9115\n metrics_path: /probe\n\n - job_name: 'Blackbox Exporter (http)'\n static_configs:\n - targets: [ 'gerrit.fd.io' ]\n - targets: [ 'jenkins.fd.io' ]\n params:\n module: [ 'http_2xx' ]\n relabel_configs:\n - source_labels: [__address__]\n target_label: __param_target\n - source_labels: [__param_target]\n target_label: instance\n - target_label: __address__\n replacement: localhost:9115\n metrics_path: /probe\n\n - job_name: 'cAdvisor Exporter'\n static_configs:\n - targets: [ '10.30.51.28:8080' ]\n - targets: [ '10.30.51.29:8080' ]\n - targets: [ '10.30.51.30:8080' ]\n #- targets: [ '10.30.51.32:8080' ]\n - targets: [ '10.30.51.33:8080' ]\n - targets: [ '10.30.51.34:8080' ]\n - targets: [ '10.30.51.35:8080' ]\n - targets: [ '10.30.51.39:8080' ]\n - targets: [ '10.30.51.40:8080' ]\n - targets: [ '10.30.51.50:8080' ]\n - targets: [ '10.30.51.51:8080' ]\n - targets: [ '10.30.51.65:8080' ]\n - targets: [ '10.30.51.66:8080' ]\n - targets: [ '10.30.51.67:8080' ]\n - targets: [ '10.30.51.68:8080' ]\n - targets: [ '10.30.51.70:8080' ]\n - targets: [ '10.30.51.71:8080' ]\n - targets: [ '10.32.8.14:8080' ]\n - targets: [ '10.32.8.15:8080' ]\n - targets: [ '10.32.8.16:8080' ]\n - targets: [ '10.32.8.17:8080' ]\n\n - job_name: 'Jenkins Job Health Exporter'\n static_configs:\n - targets: [ '10.30.51.32:9186' ]\n metric_relabel_configs:\n - source_labels: [ __name__ ]\n regex: '^(vpp.*|csit.*)_(success|failure|total|unstable|reqtime_ms)$'\n action: replace\n replacement: '$1'\n target_label: id\n - source_labels: [ __name__ ]\n regex: '^(vpp.*|csit.*)_(success|failure|total|unstable|reqtime_ms)$'\n replacement: 'jenkins_job_$2'\n target_label: __name__\n\n - job_name: 'Node Exporter'\n static_configs:\n - targets: [ '10.30.51.28:9100' ]\n - targets: [ '10.30.51.29:9100' ]\n - targets: [ '10.30.51.30:9100' ]\n - targets: [ '10.30.51.32:9100' ]\n - targets: [ '10.30.51.33:9100' ]\n - targets: [ '10.30.51.34:9100' ]\n - targets: [ '10.30.51.35:9100' ]\n - targets: [ '10.30.51.39:9100' ]\n - targets: [ '10.30.51.40:9100' ]\n - targets: [ '10.30.51.50:9100' ]\n - targets: [ '10.30.51.51:9100' ]\n - targets: [ '10.30.51.65:9100' ]\n - targets: [ '10.30.51.66:9100' ]\n - targets: [ '10.30.51.67:9100' ]\n - targets: [ '10.30.51.68:9100' ]\n - targets: [ '10.30.51.70:9100' ]\n - targets: [ '10.30.51.71:9100' ]\n - targets: [ '10.32.8.14:9100' ]\n - targets: [ '10.32.8.15:9100' ]\n - targets: [ '10.32.8.16:9100' ]\n - targets: [ '10.32.8.17:9100' ]\n\n - job_name: 'Alertmanager'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'alertmanager' ]\n\n - job_name: 'Grafana'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'grafana' ]\n\n - job_name: 'Prometheus'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'prometheus' ]\n\n - job_name: 'Minio'\n bearer_token: eyJhbGciOiJIUzUxMiIsInR5cCI6IkpXVCJ9.eyJleHAiOjQ3NjQ1ODEzMzcsImlzcyI6InByb21ldGhldXMiLCJzdWIiOiJtaW5pbyJ9.oeTw3EIaiFmlDikrHXWiWXMH2vxLfDLkfjEC7G2N3M_keH_xyA_l2ofLLNYtopa_3GCEZnxLQdPuFZrmgpkDWg\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'storage' ]\n metrics_path: /minio/prometheus/metrics\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"${service_name}\"\n port = \"${service_name}\"\n tags = [ \"${service_name}$${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Prometheus Check Live\"\n type = \"http\"\n path = \"/-/healthy\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = ${cpu}\n memory = ${mem}\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"${service_name}\" {\n static = ${port}\n }\n }\n }\n }\n }\n}",
"vars": {
"cpu": "2000",
"data_dir": "/data/",
"schema_version": 0,
"attributes": {
"allocation_ids": [
- "7169d513-fb40-883e-4802-a12e3a2d782e",
- "bcf25aaa-059f-a24b-e1b7-fc2e79d69b31",
- "412db5e4-2f30-f34b-42d2-67726f9166f5",
- "b2695d95-a113-cf61-f2b8-af78a696f752"
+ "dd7ade6e-43c4-cac3-3294-9bd32d6b9764",
+ "d4ad3ff3-7b2d-b257-e24e-93955addefad",
+ "037ac779-c647-2dba-5b64-d11e2243066c"
],
"datacenters": [
"yul1"
],
- "deployment_id": "f87810ec-32a6-04a3-d507-e9d2abe2e94d",
+ "deployment_id": "9a4c9dd4-e3b9-33db-26f7-6e1e05962d90",
"deployment_status": "successful",
"deregister_on_destroy": true,
"deregister_on_id_change": true,
"detach": false,
"id": "prod-prometheus",
- "jobspec": "job \"prod-prometheus\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-prometheus\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 4\n\n # The volume stanza allows the group to specify that it requires a given\n # volume from the cluster.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/volume\n #\n \n volume \"prod-volume1-prometheus\" {\n type = \"host\"\n read_only = false\n source = \"prod-volume-data1-1\"\n }\n \n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-prometheus\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"exec\"\n\n \n volume_mount {\n volume = \"prod-volume1-prometheus\"\n destination = \"/data/\"\n read_only = false\n }\n \n\n \n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n command = \"local/prometheus-2.24.0.linux-amd64/prometheus\"\n args = [\n \"--config.file=secrets/prometheus.yml\",\n \"--storage.tsdb.path=/data/prometheus/\",\n \"--storage.tsdb.retention.time=15d\"\n ]\n }\n\n # The artifact stanza instructs Nomad to fetch and unpack a remote resource,\n # such as a file, tarball, or binary. Nomad downloads artifacts using the\n # popular go-getter library, which permits downloading artifacts from a\n # variety of locations using a URL as the input source.\n #\n # For more information and examples on the \"artifact\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/artifact\n #\n artifact {\n source = \"https://github.com/prometheus/prometheus/releases/download/v2.24.0/prometheus-2.24.0.linux-amd64.tar.gz\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/alerts.yml\"\n left_delimiter = \"{{{\"\n right_delimiter = \"}}}\"\n data = \u003c\u003cEOH\n---\ngroups:\n- name: \"Jenkins Job Health Exporter\"\n rules:\n - alert: JenkinsJobHealthExporterFailures\n expr: jenkins_job_failure{id=~\".*\"} \u003e jenkins_job_success{id=~\".*\"}\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Jenkins Job Health detected high failure rate on jenkins jobs.\"\n description: \"Job: {{ $labels.id }}\"\n - alert: JenkinsJobHealthExporterUnstable\n expr: jenkins_job_unstable{id=~\".*\"} \u003e jenkins_job_success{id=~\".*\"}\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Jenkins Job Health detected high unstable rate on jenkins jobs.\"\n description: \"Job: {{ $labels.id }}\"\n- name: \"Consul\"\n rules:\n - alert: ConsulServiceHealthcheckFailed\n expr: consul_catalog_service_node_healthy == 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul service healthcheck failed (instance {{ $labels.instance }}).\"\n description: \"Service: `{{ $labels.service_name }}` Healthcheck: `{{ $labels.service_id }}`.\"\n - alert: ConsulMissingMasterNode\n expr: consul_raft_peers \u003c 3\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul missing master node (instance {{ $labels.instance }}).\"\n description: \"Numbers of consul raft peers should be 3, in order to preserve quorum.\"\n - alert: ConsulAgentUnhealthy\n expr: consul_health_node_status{status=\"critical\"} == 1\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul agent unhealthy (instance {{ $labels.instance }}).\"\n description: \"A Consul agent is down.\"\n- name: \"Hosts\"\n rules:\n - alert: NodeDown\n expr: up == 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus target missing (instance {{ $labels.instance }}).\"\n description: \"A Prometheus target has disappeared. An exporter might be crashed.\"\n - alert: HostHighCpuLoad\n expr: 100 - (avg by(instance) (rate(node_cpu_seconds_total{mode=\"idle\"}[5m])) * 100) \u003e 95\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host high CPU load (instance {{ $labels.instance }}).\"\n description: \"CPU load is \u003e 95%.\"\n - alert: HostOutOfMemory\n expr: node_memory_MemAvailable_bytes / node_memory_MemTotal_bytes * 100 \u003c 10\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host out of memory (instance {{ $labels.instance }}).\"\n description: \"Node memory is filling up (\u003c 10% left).\"\n - alert: HostOomKillDetected\n expr: increase(node_vmstat_oom_kill[1m]) \u003e 0\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host OOM kill detected (instance {{ $labels.instance }}).\"\n description: \"OOM kill detected.\"\n - alert: HostMemoryUnderMemoryPressure\n expr: rate(node_vmstat_pgmajfault[1m]) \u003e 1000\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host memory under memory pressure (instance {{ $labels.instance }}).\"\n description: \"The node is under heavy memory pressure. High rate of major page faults.\"\n - alert: HostOutOfDiskSpace\n expr: (node_filesystem_avail_bytes * 100) / node_filesystem_size_bytes \u003c 10 and ON (instance, device, mountpoint) node_filesystem_readonly == 0\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host out of disk space (instance {{ $labels.instance }}).\"\n description: \"Disk is almost full (\u003c 10% left).\"\n - alert: HostRaidDiskFailure\n expr: node_md_disks{state=\"failed\"} \u003e 0\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host RAID disk failure (instance {{ $labels.instance }}).\"\n description: \"At least one device in RAID array on {{ $labels.instance }} failed. Array {{ $labels.md_device }} needs attention and possibly a disk swap.\"\n - alert: HostConntrackLimit\n expr: node_nf_conntrack_entries / node_nf_conntrack_entries_limit \u003e 0.8\n for: 5m\n labels:\n severity: warning\n annotations:\n summary: \"Host conntrack limit (instance {{ $labels.instance }}).\"\n description: \"The number of conntrack is approching limit.\"\n - alert: HostNetworkInterfaceSaturated\n expr: (rate(node_network_receive_bytes_total{device!~\"^tap.*\"}[1m]) + rate(node_network_transmit_bytes_total{device!~\"^tap.*\"}[1m])) / node_network_speed_bytes{device!~\"^tap.*\"} \u003e 0.8\n for: 1m\n labels:\n severity: warning\n annotations:\n summary: \"Host Network Interface Saturated (instance {{ $labels.instance }}).\"\n description: \"The network interface {{ $labels.interface }} on {{ $labels.instance }} is getting overloaded.\"\n - alert: HostSystemdServiceCrashed\n expr: node_systemd_unit_state{state=\"failed\"} == 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host SystemD service crashed (instance {{ $labels.instance }}).\"\n description: \"SystemD service crashed.\"\n - alert: HostEdacCorrectableErrorsDetected\n expr: increase(node_edac_correctable_errors_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: info\n annotations:\n summary: \"Host EDAC Correctable Errors detected (instance {{ $labels.instance }}).\"\n description: '{{ $labels.instance }} has had {{ printf \"%.0f\" $value }} correctable memory errors reported by EDAC in the last 5 minutes.'\n - alert: HostEdacUncorrectableErrorsDetected\n expr: node_edac_uncorrectable_errors_total \u003e 0\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host EDAC Uncorrectable Errors detected (instance {{ $labels.instance }}).\"\n description: '{{ $labels.instance }} has had {{ printf \"%.0f\" $value }} uncorrectable memory errors reported by EDAC in the last 5 minutes.'\n- name: \"Min.io\"\n rules:\n - alert: MinioDiskOffline\n expr: minio_offline_disks \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Minio disk offline (instance {{ $labels.instance }})\"\n description: \"Minio disk is offline.\"\n - alert: MinioStorageSpaceExhausted\n expr: minio_disk_storage_free_bytes / 1024 / 1024 / 1024 \u003c 10\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Minio storage space exhausted (instance {{ $labels.instance }}).\"\n description: \"Minio storage space is low (\u003c 10 GB).\"\n- name: \"Prometheus\"\n rules:\n - alert: PrometheusConfigurationReloadFailure\n expr: prometheus_config_last_reload_successful != 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus configuration reload failure (instance {{ $labels.instance }}).\"\n description: \"Prometheus configuration reload error.\"\n - alert: PrometheusTooManyRestarts\n expr: changes(process_start_time_seconds{job=~\"prometheus|pushgateway|alertmanager\"}[15m]) \u003e 2\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus too many restarts (instance {{ $labels.instance }}).\"\n description: \"Prometheus has restarted more than twice in the last 15 minutes. It might be crashlooping.\"\n - alert: PrometheusAlertmanagerConfigurationReloadFailure\n expr: alertmanager_config_last_reload_successful != 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus AlertManager configuration reload failure (instance {{ $labels.instance }}).\"\n description: \"AlertManager configuration reload error.\"\n - alert: PrometheusRuleEvaluationFailures\n expr: increase(prometheus_rule_evaluation_failures_total[3m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus rule evaluation failures (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} rule evaluation failures, leading to potentially ignored alerts.\"\n - alert: PrometheusTargetScrapingSlow\n expr: prometheus_target_interval_length_seconds{quantile=\"0.9\"} \u003e 60\n for: 5m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus target scraping slow (instance {{ $labels.instance }}).\"\n description: \"Prometheus is scraping exporters slowly.\"\n - alert: PrometheusTsdbCompactionsFailed\n expr: increase(prometheus_tsdb_compactions_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB compactions failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB compactions failures.\"\n - alert: PrometheusTsdbHeadTruncationsFailed\n expr: increase(prometheus_tsdb_head_truncations_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB head truncations failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB head truncation failures.\"\n - alert: PrometheusTsdbWalCorruptions\n expr: increase(prometheus_tsdb_wal_corruptions_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB WAL corruptions (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB WAL corruptions.\"\n - alert: PrometheusTsdbWalTruncationsFailed\n expr: increase(prometheus_tsdb_wal_truncations_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB WAL truncations failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB WAL truncation failures.\"\nEOH\n }\n\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/prometheus.yml\"\n data = \u003c\u003cEOH\n---\nglobal:\n scrape_interval: 5s\n scrape_timeout: 5s\n evaluation_interval: 5s\n\nalerting:\n alertmanagers:\n - consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'alertmanager' ]\n\nrule_files:\n - 'alerts.yml'\n\nscrape_configs:\n\n - job_name: 'Nomad Cluster'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'nomad-client', 'nomad' ]\n relabel_configs:\n - source_labels: [__meta_consul_tags]\n regex: '(.*)http(.*)'\n action: keep\n metrics_path: /v1/metrics\n params:\n format: [ 'prometheus' ]\n\n - job_name: 'Consul Cluster'\n static_configs:\n - targets: [ '10.30.51.28:8500' ]\n - targets: [ '10.30.51.29:8500' ]\n - targets: [ '10.30.51.30:8500' ]\n - targets: [ '10.30.51.32:8500' ]\n - targets: [ '10.30.51.33:8500' ]\n - targets: [ '10.30.51.34:8500' ]\n - targets: [ '10.30.51.35:8500' ]\n - targets: [ '10.30.51.39:8500' ]\n - targets: [ '10.30.51.40:8500' ]\n - targets: [ '10.30.51.50:8500' ]\n - targets: [ '10.30.51.51:8500' ]\n - targets: [ '10.30.51.65:8500' ]\n - targets: [ '10.30.51.66:8500' ]\n - targets: [ '10.30.51.67:8500' ]\n - targets: [ '10.30.51.68:8500' ]\n - targets: [ '10.30.51.70:8500' ]\n - targets: [ '10.30.51.71:8500' ]\n - targets: [ '10.32.8.14:8500' ]\n - targets: [ '10.32.8.15:8500' ]\n - targets: [ '10.32.8.16:8500' ]\n - targets: [ '10.32.8.17:8500' ]\n metrics_path: /v1/agent/metrics\n params:\n format: [ 'prometheus' ]\n\n - job_name: 'Blackbox Exporter (icmp)'\n static_configs:\n - targets: [ 'gerrit.fd.io' ]\n - targets: [ 'jenkins.fd.io' ]\n - targets: [ '10.30.51.32' ]\n params:\n module: [ 'icmp_v4' ]\n relabel_configs:\n - source_labels: [__address__]\n target_label: __param_target\n - source_labels: [__param_target]\n target_label: instance\n - target_label: __address__\n replacement: localhost:9115\n metrics_path: /probe\n\n - job_name: 'Blackbox Exporter (http)'\n static_configs:\n - targets: [ 'gerrit.fd.io' ]\n - targets: [ 'jenkins.fd.io' ]\n params:\n module: [ 'http_2xx' ]\n relabel_configs:\n - source_labels: [__address__]\n target_label: __param_target\n - source_labels: [__param_target]\n target_label: instance\n - target_label: __address__\n replacement: localhost:9115\n metrics_path: /probe\n\n - job_name: 'cAdvisor Exporter'\n static_configs:\n - targets: [ '10.30.51.28:8080' ]\n - targets: [ '10.30.51.29:8080' ]\n - targets: [ '10.30.51.30:8080' ]\n #- targets: [ '10.30.51.32:8080' ]\n - targets: [ '10.30.51.33:8080' ]\n - targets: [ '10.30.51.34:8080' ]\n - targets: [ '10.30.51.35:8080' ]\n - targets: [ '10.30.51.39:8080' ]\n - targets: [ '10.30.51.40:8080' ]\n - targets: [ '10.30.51.50:8080' ]\n - targets: [ '10.30.51.51:8080' ]\n - targets: [ '10.30.51.65:8080' ]\n - targets: [ '10.30.51.66:8080' ]\n - targets: [ '10.30.51.67:8080' ]\n - targets: [ '10.30.51.68:8080' ]\n - targets: [ '10.30.51.70:8080' ]\n - targets: [ '10.30.51.71:8080' ]\n - targets: [ '10.32.8.14:8080' ]\n - targets: [ '10.32.8.15:8080' ]\n - targets: [ '10.32.8.16:8080' ]\n - targets: [ '10.32.8.17:8080' ]\n\n - job_name: 'Jenkins Job Health Exporter'\n static_configs:\n - targets: [ '10.30.51.32:9186' ]\n metric_relabel_configs:\n - source_labels: [ __name__ ]\n regex: '^(vpp.*|csit.*)_(success|failure|total|unstable|reqtime_ms)$'\n action: replace\n replacement: '$1'\n target_label: id\n - source_labels: [ __name__ ]\n regex: '^(vpp.*|csit.*)_(success|failure|total|unstable|reqtime_ms)$'\n replacement: 'jenkins_job_$2'\n target_label: __name__\n\n - job_name: 'Node Exporter'\n static_configs:\n - targets: [ '10.30.51.28:9100' ]\n - targets: [ '10.30.51.29:9100' ]\n - targets: [ '10.30.51.30:9100' ]\n - targets: [ '10.30.51.32:9100' ]\n - targets: [ '10.30.51.33:9100' ]\n - targets: [ '10.30.51.34:9100' ]\n - targets: [ '10.30.51.35:9100' ]\n - targets: [ '10.30.51.39:9100' ]\n - targets: [ '10.30.51.40:9100' ]\n - targets: [ '10.30.51.50:9100' ]\n - targets: [ '10.30.51.51:9100' ]\n - targets: [ '10.30.51.65:9100' ]\n - targets: [ '10.30.51.66:9100' ]\n - targets: [ '10.30.51.67:9100' ]\n - targets: [ '10.30.51.68:9100' ]\n - targets: [ '10.30.51.70:9100' ]\n - targets: [ '10.30.51.71:9100' ]\n - targets: [ '10.32.8.14:9100' ]\n - targets: [ '10.32.8.15:9100' ]\n - targets: [ '10.32.8.16:9100' ]\n - targets: [ '10.32.8.17:9100' ]\n\n - job_name: 'Alertmanager'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'alertmanager' ]\n\n - job_name: 'Grafana'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'grafana' ]\n\n - job_name: 'Prometheus'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'prometheus' ]\n\n - job_name: 'Minio'\n bearer_token: eyJhbGciOiJIUzUxMiIsInR5cCI6IkpXVCJ9.eyJleHAiOjQ3NjQ1ODEzMzcsImlzcyI6InByb21ldGhldXMiLCJzdWIiOiJtaW5pbyJ9.oeTw3EIaiFmlDikrHXWiWXMH2vxLfDLkfjEC7G2N3M_keH_xyA_l2ofLLNYtopa_3GCEZnxLQdPuFZrmgpkDWg\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'storage' ]\n metrics_path: /minio/prometheus/metrics\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"prometheus\"\n port = \"prometheus\"\n tags = [ \"prometheus${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Prometheus Check Live\"\n type = \"http\"\n path = \"/-/healthy\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = 2000\n memory = 8192\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"prometheus\" {\n static = 9090\n }\n }\n }\n }\n }\n}",
+ "jobspec": "job \"prod-prometheus\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n\n }\n\n # The reschedule stanza specifies the group's rescheduling strategy. If\n # specified at the job level, the configuration will apply to all groups\n # within the job. If the reschedule stanza is present on both the job and the\n # group, they are merged with the group stanza taking the highest precedence\n # and then the job.\n reschedule {\n delay = \"30s\"\n delay_function = \"constant\"\n unlimited = true\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-prometheus\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 4\n\n # The restart stanza configures a tasks's behavior on task failure. Restarts\n # happen on the client that is running the task.\n #\n # https://www.nomadproject.io/docs/job-specification/restart\n #\n restart {\n interval = \"30m\"\n attempts = 40\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The volume stanza allows the group to specify that it requires a given\n # volume from the cluster.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/volume\n #\n \n volume \"prod-volume1-prometheus\" {\n type = \"host\"\n read_only = false\n source = \"prod-volume-data1-1\"\n }\n \n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-prometheus\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"exec\"\n\n \n volume_mount {\n volume = \"prod-volume1-prometheus\"\n destination = \"/data/\"\n read_only = false\n }\n \n\n \n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n command = \"local/prometheus-2.24.0.linux-amd64/prometheus\"\n args = [\n \"--config.file=secrets/prometheus.yml\",\n \"--storage.tsdb.path=/data/prometheus/\",\n \"--storage.tsdb.retention.time=15d\"\n ]\n }\n\n # The artifact stanza instructs Nomad to fetch and unpack a remote resource,\n # such as a file, tarball, or binary. Nomad downloads artifacts using the\n # popular go-getter library, which permits downloading artifacts from a\n # variety of locations using a URL as the input source.\n #\n # For more information and examples on the \"artifact\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/artifact\n #\n artifact {\n source = \"https://github.com/prometheus/prometheus/releases/download/v2.24.0/prometheus-2.24.0.linux-amd64.tar.gz\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/alerts.yml\"\n left_delimiter = \"{{{\"\n right_delimiter = \"}}}\"\n data = \u003c\u003cEOH\n---\ngroups:\n- name: \"Jenkins Job Health Exporter\"\n rules:\n - alert: JenkinsJobHealthExporterFailures\n expr: jenkins_job_failure{id=~\".*\"} \u003e jenkins_job_success{id=~\".*\"}\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Jenkins Job Health detected high failure rate on jenkins jobs.\"\n description: \"Job: {{ $labels.id }}\"\n - alert: JenkinsJobHealthExporterUnstable\n expr: jenkins_job_unstable{id=~\".*\"} \u003e jenkins_job_success{id=~\".*\"}\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Jenkins Job Health detected high unstable rate on jenkins jobs.\"\n description: \"Job: {{ $labels.id }}\"\n- name: \"Consul\"\n rules:\n - alert: ConsulServiceHealthcheckFailed\n expr: consul_catalog_service_node_healthy == 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul service healthcheck failed (instance {{ $labels.instance }}).\"\n description: \"Service: `{{ $labels.service_name }}` Healthcheck: `{{ $labels.service_id }}`.\"\n - alert: ConsulMissingMasterNode\n expr: consul_raft_peers \u003c 3\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul missing master node (instance {{ $labels.instance }}).\"\n description: \"Numbers of consul raft peers should be 3, in order to preserve quorum.\"\n - alert: ConsulAgentUnhealthy\n expr: consul_health_node_status{status=\"critical\"} == 1\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Consul agent unhealthy (instance {{ $labels.instance }}).\"\n description: \"A Consul agent is down.\"\n- name: \"Hosts\"\n rules:\n - alert: NodeDown\n expr: up == 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus target missing (instance {{ $labels.instance }}).\"\n description: \"A Prometheus target has disappeared. An exporter might be crashed.\"\n - alert: HostHighCpuLoad\n expr: 100 - (avg by(instance) (rate(node_cpu_seconds_total{mode=\"idle\"}[5m])) * 100) \u003e 95\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host high CPU load (instance {{ $labels.instance }}).\"\n description: \"CPU load is \u003e 95%.\"\n - alert: HostOutOfMemory\n expr: node_memory_MemAvailable_bytes / node_memory_MemTotal_bytes * 100 \u003c 10\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host out of memory (instance {{ $labels.instance }}).\"\n description: \"Node memory is filling up (\u003c 10% left).\"\n - alert: HostOomKillDetected\n expr: increase(node_vmstat_oom_kill[1m]) \u003e 0\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host OOM kill detected (instance {{ $labels.instance }}).\"\n description: \"OOM kill detected.\"\n - alert: HostMemoryUnderMemoryPressure\n expr: rate(node_vmstat_pgmajfault[1m]) \u003e 1000\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host memory under memory pressure (instance {{ $labels.instance }}).\"\n description: \"The node is under heavy memory pressure. High rate of major page faults.\"\n - alert: HostOutOfDiskSpace\n expr: (node_filesystem_avail_bytes * 100) / node_filesystem_size_bytes \u003c 10 and ON (instance, device, mountpoint) node_filesystem_readonly == 0\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host out of disk space (instance {{ $labels.instance }}).\"\n description: \"Disk is almost full (\u003c 10% left).\"\n - alert: HostRaidDiskFailure\n expr: node_md_disks{state=\"failed\"} \u003e 0\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Host RAID disk failure (instance {{ $labels.instance }}).\"\n description: \"At least one device in RAID array on {{ $labels.instance }} failed. Array {{ $labels.md_device }} needs attention and possibly a disk swap.\"\n - alert: HostConntrackLimit\n expr: node_nf_conntrack_entries / node_nf_conntrack_entries_limit \u003e 0.8\n for: 5m\n labels:\n severity: warning\n annotations:\n summary: \"Host conntrack limit (instance {{ $labels.instance }}).\"\n description: \"The number of conntrack is approching limit.\"\n - alert: HostNetworkInterfaceSaturated\n expr: (rate(node_network_receive_bytes_total{device!~\"^tap.*\"}[1m]) + rate(node_network_transmit_bytes_total{device!~\"^tap.*\"}[1m])) / node_network_speed_bytes{device!~\"^tap.*\"} \u003e 0.8\n for: 1m\n labels:\n severity: warning\n annotations:\n summary: \"Host Network Interface Saturated (instance {{ $labels.instance }}).\"\n description: \"The network interface {{ $labels.interface }} on {{ $labels.instance }} is getting overloaded.\"\n - alert: HostSystemdServiceCrashed\n expr: node_systemd_unit_state{state=\"failed\"} == 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host SystemD service crashed (instance {{ $labels.instance }}).\"\n description: \"SystemD service crashed.\"\n - alert: HostEdacCorrectableErrorsDetected\n expr: increase(node_edac_correctable_errors_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: info\n annotations:\n summary: \"Host EDAC Correctable Errors detected (instance {{ $labels.instance }}).\"\n description: '{{ $labels.instance }} has had {{ printf \"%.0f\" $value }} correctable memory errors reported by EDAC in the last 5 minutes.'\n - alert: HostEdacUncorrectableErrorsDetected\n expr: node_edac_uncorrectable_errors_total \u003e 0\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Host EDAC Uncorrectable Errors detected (instance {{ $labels.instance }}).\"\n description: '{{ $labels.instance }} has had {{ printf \"%.0f\" $value }} uncorrectable memory errors reported by EDAC in the last 5 minutes.'\n- name: \"Min.io\"\n rules:\n - alert: MinioDiskOffline\n expr: minio_offline_disks \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Minio disk offline (instance {{ $labels.instance }})\"\n description: \"Minio disk is offline.\"\n - alert: MinioStorageSpaceExhausted\n expr: minio_disk_storage_free_bytes / 1024 / 1024 / 1024 \u003c 10\n for: 2m\n labels:\n severity: warning\n annotations:\n summary: \"Minio storage space exhausted (instance {{ $labels.instance }}).\"\n description: \"Minio storage space is low (\u003c 10 GB).\"\n- name: \"Prometheus\"\n rules:\n - alert: PrometheusConfigurationReloadFailure\n expr: prometheus_config_last_reload_successful != 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus configuration reload failure (instance {{ $labels.instance }}).\"\n description: \"Prometheus configuration reload error.\"\n - alert: PrometheusTooManyRestarts\n expr: changes(process_start_time_seconds{job=~\"prometheus|pushgateway|alertmanager\"}[15m]) \u003e 2\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus too many restarts (instance {{ $labels.instance }}).\"\n description: \"Prometheus has restarted more than twice in the last 15 minutes. It might be crashlooping.\"\n - alert: PrometheusAlertmanagerConfigurationReloadFailure\n expr: alertmanager_config_last_reload_successful != 1\n for: 0m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus AlertManager configuration reload failure (instance {{ $labels.instance }}).\"\n description: \"AlertManager configuration reload error.\"\n - alert: PrometheusRuleEvaluationFailures\n expr: increase(prometheus_rule_evaluation_failures_total[3m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus rule evaluation failures (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} rule evaluation failures, leading to potentially ignored alerts.\"\n - alert: PrometheusTargetScrapingSlow\n expr: prometheus_target_interval_length_seconds{quantile=\"0.9\"} \u003e 60\n for: 5m\n labels:\n severity: warning\n annotations:\n summary: \"Prometheus target scraping slow (instance {{ $labels.instance }}).\"\n description: \"Prometheus is scraping exporters slowly.\"\n - alert: PrometheusTsdbCompactionsFailed\n expr: increase(prometheus_tsdb_compactions_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB compactions failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB compactions failures.\"\n - alert: PrometheusTsdbHeadTruncationsFailed\n expr: increase(prometheus_tsdb_head_truncations_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB head truncations failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB head truncation failures.\"\n - alert: PrometheusTsdbWalCorruptions\n expr: increase(prometheus_tsdb_wal_corruptions_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB WAL corruptions (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB WAL corruptions.\"\n - alert: PrometheusTsdbWalTruncationsFailed\n expr: increase(prometheus_tsdb_wal_truncations_failed_total[1m]) \u003e 0\n for: 0m\n labels:\n severity: critical\n annotations:\n summary: \"Prometheus TSDB WAL truncations failed (instance {{ $labels.instance }}).\"\n description: \"Prometheus encountered {{ $value }} TSDB WAL truncation failures.\"\nEOH\n }\n\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/prometheus.yml\"\n data = \u003c\u003cEOH\n---\nglobal:\n scrape_interval: 5s\n scrape_timeout: 5s\n evaluation_interval: 5s\n\nalerting:\n alertmanagers:\n - consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'alertmanager' ]\n\nrule_files:\n - 'alerts.yml'\n\nscrape_configs:\n\n - job_name: 'Nomad Cluster'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'nomad-client', 'nomad' ]\n relabel_configs:\n - source_labels: [__meta_consul_tags]\n regex: '(.*)http(.*)'\n action: keep\n metrics_path: /v1/metrics\n params:\n format: [ 'prometheus' ]\n\n - job_name: 'Consul Cluster'\n static_configs:\n - targets: [ '10.30.51.28:8500' ]\n - targets: [ '10.30.51.29:8500' ]\n - targets: [ '10.30.51.30:8500' ]\n - targets: [ '10.30.51.32:8500' ]\n - targets: [ '10.30.51.33:8500' ]\n - targets: [ '10.30.51.34:8500' ]\n - targets: [ '10.30.51.35:8500' ]\n - targets: [ '10.30.51.39:8500' ]\n - targets: [ '10.30.51.40:8500' ]\n - targets: [ '10.30.51.50:8500' ]\n - targets: [ '10.30.51.51:8500' ]\n - targets: [ '10.30.51.65:8500' ]\n - targets: [ '10.30.51.66:8500' ]\n - targets: [ '10.30.51.67:8500' ]\n - targets: [ '10.30.51.68:8500' ]\n - targets: [ '10.30.51.70:8500' ]\n - targets: [ '10.30.51.71:8500' ]\n - targets: [ '10.32.8.14:8500' ]\n - targets: [ '10.32.8.15:8500' ]\n - targets: [ '10.32.8.16:8500' ]\n - targets: [ '10.32.8.17:8500' ]\n metrics_path: /v1/agent/metrics\n params:\n format: [ 'prometheus' ]\n\n - job_name: 'Blackbox Exporter (icmp)'\n static_configs:\n - targets: [ 'gerrit.fd.io' ]\n - targets: [ 'jenkins.fd.io' ]\n - targets: [ '10.30.51.32' ]\n params:\n module: [ 'icmp_v4' ]\n relabel_configs:\n - source_labels: [__address__]\n target_label: __param_target\n - source_labels: [__param_target]\n target_label: instance\n - target_label: __address__\n replacement: localhost:9115\n metrics_path: /probe\n\n - job_name: 'Blackbox Exporter (http)'\n static_configs:\n - targets: [ 'gerrit.fd.io' ]\n - targets: [ 'jenkins.fd.io' ]\n params:\n module: [ 'http_2xx' ]\n relabel_configs:\n - source_labels: [__address__]\n target_label: __param_target\n - source_labels: [__param_target]\n target_label: instance\n - target_label: __address__\n replacement: localhost:9115\n metrics_path: /probe\n\n - job_name: 'cAdvisor Exporter'\n static_configs:\n - targets: [ '10.30.51.28:8080' ]\n - targets: [ '10.30.51.29:8080' ]\n - targets: [ '10.30.51.30:8080' ]\n #- targets: [ '10.30.51.32:8080' ]\n - targets: [ '10.30.51.33:8080' ]\n - targets: [ '10.30.51.34:8080' ]\n - targets: [ '10.30.51.35:8080' ]\n - targets: [ '10.30.51.39:8080' ]\n - targets: [ '10.30.51.40:8080' ]\n - targets: [ '10.30.51.50:8080' ]\n - targets: [ '10.30.51.51:8080' ]\n - targets: [ '10.30.51.65:8080' ]\n - targets: [ '10.30.51.66:8080' ]\n - targets: [ '10.30.51.67:8080' ]\n - targets: [ '10.30.51.68:8080' ]\n - targets: [ '10.30.51.70:8080' ]\n - targets: [ '10.30.51.71:8080' ]\n - targets: [ '10.32.8.14:8080' ]\n - targets: [ '10.32.8.15:8080' ]\n - targets: [ '10.32.8.16:8080' ]\n - targets: [ '10.32.8.17:8080' ]\n\n - job_name: 'Jenkins Job Health Exporter'\n static_configs:\n - targets: [ '10.30.51.32:9186' ]\n metric_relabel_configs:\n - source_labels: [ __name__ ]\n regex: '^(vpp.*|csit.*)_(success|failure|total|unstable|reqtime_ms)$'\n action: replace\n replacement: '$1'\n target_label: id\n - source_labels: [ __name__ ]\n regex: '^(vpp.*|csit.*)_(success|failure|total|unstable|reqtime_ms)$'\n replacement: 'jenkins_job_$2'\n target_label: __name__\n\n - job_name: 'Node Exporter'\n static_configs:\n - targets: [ '10.30.51.28:9100' ]\n - targets: [ '10.30.51.29:9100' ]\n - targets: [ '10.30.51.30:9100' ]\n - targets: [ '10.30.51.32:9100' ]\n - targets: [ '10.30.51.33:9100' ]\n - targets: [ '10.30.51.34:9100' ]\n - targets: [ '10.30.51.35:9100' ]\n - targets: [ '10.30.51.39:9100' ]\n - targets: [ '10.30.51.40:9100' ]\n - targets: [ '10.30.51.50:9100' ]\n - targets: [ '10.30.51.51:9100' ]\n - targets: [ '10.30.51.65:9100' ]\n - targets: [ '10.30.51.66:9100' ]\n - targets: [ '10.30.51.67:9100' ]\n - targets: [ '10.30.51.68:9100' ]\n - targets: [ '10.30.51.70:9100' ]\n - targets: [ '10.30.51.71:9100' ]\n - targets: [ '10.32.8.14:9100' ]\n - targets: [ '10.32.8.15:9100' ]\n - targets: [ '10.32.8.16:9100' ]\n - targets: [ '10.32.8.17:9100' ]\n\n - job_name: 'Alertmanager'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'alertmanager' ]\n\n - job_name: 'Grafana'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'grafana' ]\n\n - job_name: 'Prometheus'\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'prometheus' ]\n\n - job_name: 'Minio'\n bearer_token: eyJhbGciOiJIUzUxMiIsInR5cCI6IkpXVCJ9.eyJleHAiOjQ3NjQ1ODEzMzcsImlzcyI6InByb21ldGhldXMiLCJzdWIiOiJtaW5pbyJ9.oeTw3EIaiFmlDikrHXWiWXMH2vxLfDLkfjEC7G2N3M_keH_xyA_l2ofLLNYtopa_3GCEZnxLQdPuFZrmgpkDWg\n consul_sd_configs:\n - server: '{{ env \"NOMAD_IP_prometheus\" }}:8500'\n services: [ 'storage' ]\n metrics_path: /minio/prometheus/metrics\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"prometheus\"\n port = \"prometheus\"\n tags = [ \"prometheus${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Prometheus Check Live\"\n type = \"http\"\n path = \"/-/healthy\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = 2000\n memory = 8192\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"prometheus\" {\n static = 9090\n }\n }\n }\n }\n }\n}",
"json": null,
- "modify_index": "7502384",
+ "modify_index": "7575038",
"name": "prod-prometheus",
"namespace": "default",
"policy_override": null,
"schema_version": 0,
"attributes": {
"filename": null,
- "id": "95bbc9810be63e5d4e9fb668030eacc88f86d0d00b92cc2d08aee2dc1669fa0b",
- "rendered": "job \"prod-device-csit-shim\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers.html\n #\n type = \"system\"\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group.html\n #\n group \"prod-group1-csit-shim-amd\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n constraint {\n attribute = \"${node.class}\"\n value = \"csit\"\n }\n\n restart {\n interval = \"1m\"\n attempts = 3\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task.html\n #\n task \"prod-task1-csit-shim-amd\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"csit_shim-ubuntu1804:local\"\n network_mode = \"host\"\n pid_mode = \"host\"\n volumes = [\n \"/var/run/docker.sock:/var/run/docker.sock\"\n ]\n privileged = true\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources.html\n #\n resources {\n cpu = 1500\n memory = 4096\n network {\n port \"ssh\" {\n static = 6022\n }\n port \"ssh2\" {\n static = 6023\n }\n }\n }\n }\n }\n\n group \"prod-group1-csit-shim-arm\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n constraint {\n attribute = \"${node.class}\"\n value = \"csitarm\"\n }\n\n restart {\n interval = \"1m\"\n attempts = 3\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task.html\n #\n task \"prod-task1-csit-shim-arm\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"csit_shim-ubuntu1804:local\"\n network_mode = \"host\"\n pid_mode = \"host\"\n volumes = [\n \"/var/run/docker.sock:/var/run/docker.sock\"\n ]\n privileged = true\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources.html\n #\n resources {\n cpu = 1500\n memory = 4096\n network {\n port \"ssh\" {\n static = 6022\n }\n port \"ssh2\" {\n static = 6023\n }\n }\n }\n }\n }\n}",
+ "id": "bebf27b2f8eb532adad3cabb86953deed4d0e9970ab0524d7857b3ebeebb917d",
+ "rendered": "job \"prod-device-csit-shim\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers.html\n #\n type = \"system\"\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group.html\n #\n group \"prod-group1-csit-shim-amd\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n constraint {\n attribute = \"${node.class}\"\n value = \"csit\"\n }\n\n restart {\n interval = \"1m\"\n attempts = 3\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task.html\n #\n task \"prod-task1-csit-shim-amd\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"fdiotools/csit_shim-ubuntu2004:2021_03_04_142103_UTC-x86_64\"\n network_mode = \"host\"\n pid_mode = \"host\"\n volumes = [\n \"/var/run/docker.sock:/var/run/docker.sock\"\n ]\n privileged = true\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources.html\n #\n resources {\n cpu = 1500\n memory = 4096\n network {\n port \"ssh\" {\n static = 6022\n }\n port \"ssh2\" {\n static = 6023\n }\n }\n }\n }\n }\n\n group \"prod-group1-csit-shim-arm\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n constraint {\n attribute = \"${node.class}\"\n value = \"csitarm\"\n }\n\n restart {\n interval = \"1m\"\n attempts = 3\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task.html\n #\n task \"prod-task1-csit-shim-arm\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"fdiotools/csit_shim-ubuntu2004:2021_03_02_143938_UTC-aarch64\"\n network_mode = \"host\"\n pid_mode = \"host\"\n volumes = [\n \"/var/run/docker.sock:/var/run/docker.sock\"\n ]\n privileged = true\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources.html\n #\n resources {\n cpu = 1500\n memory = 4096\n network {\n port \"ssh\" {\n static = 6022\n }\n port \"ssh2\" {\n static = 6023\n }\n }\n }\n }\n }\n}",
"template": "job \"${job_name}\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"${datacenters}\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers.html\n #\n type = \"system\"\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group.html\n #\n group \"prod-group1-csit-shim-amd\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = ${group_count}\n\n constraint {\n attribute = \"$${node.class}\"\n value = \"csit\"\n }\n\n restart {\n interval = \"1m\"\n attempts = 3\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task.html\n #\n task \"prod-task1-csit-shim-amd\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"${image_x86_64}\"\n network_mode = \"host\"\n pid_mode = \"host\"\n volumes = [\n \"/var/run/docker.sock:/var/run/docker.sock\"\n ]\n privileged = true\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources.html\n #\n resources {\n cpu = ${cpu}\n memory = ${mem}\n network {\n port \"ssh\" {\n static = 6022\n }\n port \"ssh2\" {\n static = 6023\n }\n }\n }\n }\n }\n\n group \"prod-group1-csit-shim-arm\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = ${group_count}\n\n constraint {\n attribute = \"$${node.class}\"\n value = \"csitarm\"\n }\n\n restart {\n interval = \"1m\"\n attempts = 3\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task.html\n #\n task \"prod-task1-csit-shim-arm\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"${image_aarch64}\"\n network_mode = \"host\"\n pid_mode = \"host\"\n volumes = [\n \"/var/run/docker.sock:/var/run/docker.sock\"\n ]\n privileged = true\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources.html\n #\n resources {\n cpu = ${cpu}\n memory = ${mem}\n network {\n port \"ssh\" {\n static = 6022\n }\n port \"ssh2\" {\n static = 6023\n }\n }\n }\n }\n }\n}",
"vars": {
"cpu": "1500",
"datacenters": "yul1",
"group_count": "1",
- "image_aarch64": "csit_shim-ubuntu1804:local",
- "image_x86_64": "csit_shim-ubuntu1804:local",
+ "image_aarch64": "fdiotools/csit_shim-ubuntu2004:2021_03_02_143938_UTC-aarch64",
+ "image_x86_64": "fdiotools/csit_shim-ubuntu2004:2021_03_04_142103_UTC-x86_64",
"job_name": "prod-device-csit-shim",
"mem": "4096"
}
"schema_version": 0,
"attributes": {
"allocation_ids": [
- "8a028159-b7c0-be60-cfaf-d5afbed485f7",
- "eb0ef52d-046e-74bf-9cd9-1ebe8e530ff4",
- "2db5470a-e47c-5f3f-2086-fe658d92a9f1",
- "76174535-f2da-288f-ea14-8af495e631cc"
+ "516e389c-e3ce-92ed-217d-68fceb56f61e",
+ "93db39cc-26d0-ef8a-02af-f10d0e7d8db0",
+ "a8ee42a1-ff17-8a57-6276-75dc9498653e",
+ "a497e3ee-2d8b-2750-620e-223d23114ba0"
],
"datacenters": [
"yul1"
"deregister_on_id_change": true,
"detach": false,
"id": "prod-device-csit-shim",
- "jobspec": "job \"prod-device-csit-shim\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers.html\n #\n type = \"system\"\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group.html\n #\n group \"prod-group1-csit-shim-amd\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n constraint {\n attribute = \"${node.class}\"\n value = \"csit\"\n }\n\n restart {\n interval = \"1m\"\n attempts = 3\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task.html\n #\n task \"prod-task1-csit-shim-amd\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"csit_shim-ubuntu1804:local\"\n network_mode = \"host\"\n pid_mode = \"host\"\n volumes = [\n \"/var/run/docker.sock:/var/run/docker.sock\"\n ]\n privileged = true\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources.html\n #\n resources {\n cpu = 1500\n memory = 4096\n network {\n port \"ssh\" {\n static = 6022\n }\n port \"ssh2\" {\n static = 6023\n }\n }\n }\n }\n }\n\n group \"prod-group1-csit-shim-arm\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n constraint {\n attribute = \"${node.class}\"\n value = \"csitarm\"\n }\n\n restart {\n interval = \"1m\"\n attempts = 3\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task.html\n #\n task \"prod-task1-csit-shim-arm\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"csit_shim-ubuntu1804:local\"\n network_mode = \"host\"\n pid_mode = \"host\"\n volumes = [\n \"/var/run/docker.sock:/var/run/docker.sock\"\n ]\n privileged = true\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources.html\n #\n resources {\n cpu = 1500\n memory = 4096\n network {\n port \"ssh\" {\n static = 6022\n }\n port \"ssh2\" {\n static = 6023\n }\n }\n }\n }\n }\n}",
+ "jobspec": "job \"prod-device-csit-shim\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers.html\n #\n type = \"system\"\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group.html\n #\n group \"prod-group1-csit-shim-amd\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n constraint {\n attribute = \"${node.class}\"\n value = \"csit\"\n }\n\n restart {\n interval = \"1m\"\n attempts = 3\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task.html\n #\n task \"prod-task1-csit-shim-amd\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"fdiotools/csit_shim-ubuntu2004:2021_03_04_142103_UTC-x86_64\"\n network_mode = \"host\"\n pid_mode = \"host\"\n volumes = [\n \"/var/run/docker.sock:/var/run/docker.sock\"\n ]\n privileged = true\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources.html\n #\n resources {\n cpu = 1500\n memory = 4096\n network {\n port \"ssh\" {\n static = 6022\n }\n port \"ssh2\" {\n static = 6023\n }\n }\n }\n }\n }\n\n group \"prod-group1-csit-shim-arm\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n constraint {\n attribute = \"${node.class}\"\n value = \"csitarm\"\n }\n\n restart {\n interval = \"1m\"\n attempts = 3\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task.html\n #\n task \"prod-task1-csit-shim-arm\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"fdiotools/csit_shim-ubuntu2004:2021_03_02_143938_UTC-aarch64\"\n network_mode = \"host\"\n pid_mode = \"host\"\n volumes = [\n \"/var/run/docker.sock:/var/run/docker.sock\"\n ]\n privileged = true\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources.html\n #\n resources {\n cpu = 1500\n memory = 4096\n network {\n port \"ssh\" {\n static = 6022\n }\n port \"ssh2\" {\n static = 6023\n }\n }\n }\n }\n }\n}",
"json": null,
- "modify_index": "7539381",
+ "modify_index": "7575030",
"name": "prod-device-csit-shim",
"namespace": "default",
"policy_override": null,
Code Review / csit.git / blobdiff