job "${job_name}" {
- # The "datacenters" parameter specifies the list of datacenters which should
- # be considered when placing this task. This must be provided.
datacenters = "${datacenters}"
-
- # The "type" parameter controls the type of job, which impacts the scheduler's
- # decision on placement. For a full list of job types and their differences,
- # please see the online documentation.
- #
- # https://www.nomadproject.io/docs/jobspec/schedulers
- #
type = "${type}"
-
- # The periodic stanza allows a job to run at fixed times, dates, or intervals.
- # The easiest way to think about the periodic scheduler is "Nomad cron" or
- # "distributed cron".
- #
- # https://www.nomadproject.io/docs/job-specification/periodic
- #
periodic {
cron = "${cron}"
prohibit_overlap = "${prohibit_overlap}"
time_zone = "${time_zone}"
}
-
- # The "group" stanza defines a series of tasks that should be co-located on
- # the same Nomad client. Any task within a group will be placed on the same
- # client.
- #
- # https://www.nomadproject.io/docs/job-specification/group
- #
group "${job_name}-master" {
- # The restart stanza configures a tasks's behavior on task failure. Restarts
- # happen on the client that is running the task.
- #
- # https://www.nomadproject.io/docs/job-specification/restart
- #
restart {
mode = "fail"
}
-
- # The constraint allows restricting the set of eligible nodes. Constraints
- # may filter on attributes or client metadata.
- #
- # For more information and examples on the "volume" stanza, please see
- # the online documentation at:
- #
- # https://www.nomadproject.io/docs/job-specification/constraint
- #
constraint {
attribute = "$${attr.cpu.arch}"
operator = "!="
value = "arm64"
}
-
constraint {
attribute = "$${node.class}"
value = "builder"
}
-
- # The "task" stanza creates an individual unit of work, such as a Docker
- # container, web application, or batch processing.
- #
- # https://www.nomadproject.io/docs/job-specification/task.html
- #
- task "${job_name}-trending" {
- # The artifact stanza instructs Nomad to fetch and unpack a remote
- # resource, such as a file, tarball, or binary.
- #
- # https://www.nomadproject.io/docs/job-specification/artifact
- #
+ task "${job_name}-trending-mrr" {
artifact {
source = "git::https://github.com/FDio/csit"
destination = "local/csit"
}
-
- # The "driver" parameter specifies the task driver that should be used to
- # run the task.
driver = "docker"
-
- # The "config" stanza specifies the driver configuration, which is passed
- # directly to the driver to start the task. The details of configurations
- # are specific to each driver, so please see specific driver
- # documentation for more information.
config {
image = "${image}"
command = "gluesparksubmit"
args = [
"--driver-memory", "30g",
"--executor-memory", "30g",
- "trending.py"
+ "trending_mrr.py"
+ ]
+ work_dir = "/local/csit/csit.infra.etl"
+ }
+ env {
+ AWS_ACCESS_KEY_ID = "${aws_access_key_id}"
+ AWS_SECRET_ACCESS_KEY = "${aws_secret_access_key}"
+ AWS_DEFAULT_REGION = "${aws_default_region}"
+ OUT_AWS_ACCESS_KEY_ID = "${out_aws_access_key_id}"
+ OUT_AWS_SECRET_ACCESS_KEY = "${out_aws_secret_access_key}"
+ OUT_AWS_DEFAULT_REGION = "${out_aws_default_region}"
+ ${ envs }
+ }
+ resources {
+ cpu = ${cpu}
+ memory = ${memory}
+ }
+ }
+ task "${job_name}-trending-ndrpdr" {
+ artifact {
+ source = "git::https://github.com/FDio/csit"
+ destination = "local/csit"
+ }
+ driver = "docker"
+ config {
+ image = "${image}"
+ command = "gluesparksubmit"
+ args = [
+ "--driver-memory", "30g",
+ "--executor-memory", "30g",
+ "trending_ndrpdr.py"
+ ]
+ work_dir = "/local/csit/csit.infra.etl"
+ }
+ env {
+ AWS_ACCESS_KEY_ID = "${aws_access_key_id}"
+ AWS_SECRET_ACCESS_KEY = "${aws_secret_access_key}"
+ AWS_DEFAULT_REGION = "${aws_default_region}"
+ OUT_AWS_ACCESS_KEY_ID = "${out_aws_access_key_id}"
+ OUT_AWS_SECRET_ACCESS_KEY = "${out_aws_secret_access_key}"
+ OUT_AWS_DEFAULT_REGION = "${out_aws_default_region}"
+ ${ envs }
+ }
+ resources {
+ cpu = ${cpu}
+ memory = ${memory}
+ }
+ }
+ task "${job_name}-trending-soak" {
+ artifact {
+ source = "git::https://github.com/FDio/csit"
+ destination = "local/csit"
+ }
+ driver = "docker"
+ config {
+ image = "${image}"
+ command = "gluesparksubmit"
+ args = [
+ "--driver-memory", "30g",
+ "--executor-memory", "30g",
+ "trending_soak.py"
]
work_dir = "/local/csit/csit.infra.etl"
}
-
- # The env stanza configures a list of environment variables to populate
- # the task's environment before starting.
env {
AWS_ACCESS_KEY_ID = "${aws_access_key_id}"
AWS_SECRET_ACCESS_KEY = "${aws_secret_access_key}"
OUT_AWS_DEFAULT_REGION = "${out_aws_default_region}"
${ envs }
}
-
- # The "resources" stanza describes the requirements a task needs to
- # execute. Resource requirements include memory, network, cpu, and more.
- # This ensures the task will execute on a machine that contains enough
- # resource capacity.
- #
- # https://www.nomadproject.io/docs/job-specification/resources
- #
resources {
cpu = ${cpu}
memory = ${memory}
}
}
task "${job_name}-stats" {
- # The artifact stanza instructs Nomad to fetch and unpack a remote
- # resource, such as a file, tarball, or binary.
- #
- # https://www.nomadproject.io/docs/job-specification/artifact
- #
artifact {
source = "git::https://github.com/FDio/csit"
destination = "local/csit"
}
-
- # The "driver" parameter specifies the task driver that should be used to
- # run the task.
driver = "docker"
-
- # The "config" stanza specifies the driver configuration, which is passed
- # directly to the driver to start the task. The details of configurations
- # are specific to each driver, so please see specific driver
- # documentation for more information.
config {
image = "${image}"
command = "gluesparksubmit"
]
work_dir = "/local/csit/csit.infra.etl"
}
-
- # The env stanza configures a list of environment variables to populate
- # the task's environment before starting.
env {
AWS_ACCESS_KEY_ID = "${aws_access_key_id}"
AWS_SECRET_ACCESS_KEY = "${aws_secret_access_key}"
OUT_AWS_DEFAULT_REGION = "${out_aws_default_region}"
${ envs }
}
-
- # The "resources" stanza describes the requirements a task needs to
- # execute. Resource requirements include memory, network, cpu, and more.
- # This ensures the task will execute on a machine that contains enough
- # resource capacity.
- #
- # https://www.nomadproject.io/docs/job-specification/resources
- #
resources {
cpu = ${cpu}
memory = ${memory}
}
}
}
-# group "${job_name}-rls2206" {
-# # The restart stanza configures a tasks's behavior on task failure. Restarts
-# # happen on the client that is running the task.
-# #
-# # https://www.nomadproject.io/docs/job-specification/restart
-# #
-# restart {
-# mode = "fail"
-# }
-#
-# # The constraint allows restricting the set of eligible nodes. Constraints
-# # may filter on attributes or client metadata.
-# #
-# # For more information and examples on the "volume" stanza, please see
-# # the online documentation at:
-# #
-# # https://www.nomadproject.io/docs/job-specification/constraint
-# #
-# constraint {
-# attribute = "$${attr.cpu.arch}"
-# operator = "!="
-# value = "arm64"
-# }
-#
-# constraint {
-# attribute = "$${node.class}"
-# value = "builder"
-# }
-#
-# # The "task" stanza creates an individual unit of work, such as a Docker
-# # container, web application, or batch processing.
-# #
-# # https://www.nomadproject.io/docs/job-specification/task.html
-# #
-# task "${job_name}-coverage" {
-# # The artifact stanza instructs Nomad to fetch and unpack a remote
-# # resource, such as a file, tarball, or binary.
-# #
-# # https://www.nomadproject.io/docs/job-specification/artifact
-# #
-# artifact {
-# source = "git::https://github.com/FDio/csit"
-# destination = "local/csit"
-# }
-#
-# # The "driver" parameter specifies the task driver that should be used to
-# # run the task.
-# driver = "docker"
-#
-# # The "config" stanza specifies the driver configuration, which is passed
-# # directly to the driver to start the task. The details of configurations
-# # are specific to each driver, so please see specific driver
-# # documentation for more information.
-# config {
-# image = "${image}"
-# command = "gluesparksubmit"
-# args = [
-# "--driver-memory", "20g",
-# "--executor-memory", "20g",
-# "--executor-cores", "2",
-# "--master", "local[2]",
-# "coverage_rls2206.py"
-# ]
-# work_dir = "/local/csit/csit.infra.etl"
-# }
-#
-# # The env stanza configures a list of environment variables to populate
-# # the task's environment before starting.
-# env {
-# AWS_ACCESS_KEY_ID = "${aws_access_key_id}"
-# AWS_SECRET_ACCESS_KEY = "${aws_secret_access_key}"
-# AWS_DEFAULT_REGION = "${aws_default_region}"
-# OUT_AWS_ACCESS_KEY_ID = "${out_aws_access_key_id}"
-# OUT_AWS_SECRET_ACCESS_KEY = "${out_aws_secret_access_key}"
-# OUT_AWS_DEFAULT_REGION = "${out_aws_default_region}"
-# ${ envs }
-# }
-#
-# # The "resources" stanza describes the requirements a task needs to
-# # execute. Resource requirements include memory, network, cpu, and more.
-# # This ensures the task will execute on a machine that contains enough
-# # resource capacity.
-# #
-# # https://www.nomadproject.io/docs/job-specification/resources
-# #
-# resources {
-# cpu = ${cpu}
-# memory = ${memory}
-# }
-# }
-# task "${job_name}-iterative" {
-# # The artifact stanza instructs Nomad to fetch and unpack a remote
-# # resource, such as a file, tarball, or binary.
-# #
-# # https://www.nomadproject.io/docs/job-specification/artifact
-# #
-# artifact {
-# source = "git::https://github.com/FDio/csit"
-# destination = "local/csit"
-# }
-#
-# # The "driver" parameter specifies the task driver that should be used to
-# # run the task.
-# driver = "docker"
-#
-# # The "config" stanza specifies the driver configuration, which is passed
-# # directly to the driver to start the task. The details of configurations
-# # are specific to each driver, so please see specific driver
-# # documentation for more information.
-# config {
-# image = "${image}"
-# command = "gluesparksubmit"
-# args = [
-# "--driver-memory", "20g",
-# "--executor-memory", "20g",
-# "--executor-cores", "2",
-# "--master", "local[2]",
-# "iterative_rls2206.py"
-# ]
-# work_dir = "/local/csit/csit.infra.etl"
-# }
-#
-# # The env stanza configures a list of environment variables to populate
-# # the task's environment before starting.
-# env {
-# AWS_ACCESS_KEY_ID = "${aws_access_key_id}"
-# AWS_SECRET_ACCESS_KEY = "${aws_secret_access_key}"
-# AWS_DEFAULT_REGION = "${aws_default_region}"
-# OUT_AWS_ACCESS_KEY_ID = "${out_aws_access_key_id}"
-# OUT_AWS_SECRET_ACCESS_KEY = "${out_aws_secret_access_key}"
-# OUT_AWS_DEFAULT_REGION = "${out_aws_default_region}"
-# ${ envs }
-# }
-#
-# # The "resources" stanza describes the requirements a task needs to
-# # execute. Resource requirements include memory, network, cpu, and more.
-# # This ensures the task will execute on a machine that contains enough
-# # resource capacity.
-# #
-# # https://www.nomadproject.io/docs/job-specification/resources
-# #
-# resources {
-# cpu = ${cpu}
-# memory = ${memory}
-# }
-# }
-# }
+ group "${job_name}-rls2210" {
+ restart {
+ mode = "fail"
+ }
+ constraint {
+ attribute = "$${attr.cpu.arch}"
+ operator = "!="
+ value = "arm64"
+ }
+ constraint {
+ attribute = "$${node.class}"
+ value = "builder"
+ }
+ task "${job_name}-coverage-device" {
+ artifact {
+ source = "git::https://github.com/FDio/csit"
+ destination = "local/csit"
+ }
+ driver = "docker"
+ config {
+ image = "${image}"
+ command = "gluesparksubmit"
+ args = [
+ "--driver-memory", "20g",
+ "--executor-memory", "20g",
+ "--executor-cores", "2",
+ "--master", "local[2]",
+ "coverage_device_rls2210.py"
+ ]
+ work_dir = "/local/csit/csit.infra.etl"
+ }
+ env {
+ AWS_ACCESS_KEY_ID = "${aws_access_key_id}"
+ AWS_SECRET_ACCESS_KEY = "${aws_secret_access_key}"
+ AWS_DEFAULT_REGION = "${aws_default_region}"
+ OUT_AWS_ACCESS_KEY_ID = "${out_aws_access_key_id}"
+ OUT_AWS_SECRET_ACCESS_KEY = "${out_aws_secret_access_key}"
+ OUT_AWS_DEFAULT_REGION = "${out_aws_default_region}"
+ ${ envs }
+ }
+ resources {
+ cpu = ${cpu}
+ memory = ${memory}
+ }
+ }
+ task "${job_name}-coverage-mrr" {
+ artifact {
+ source = "git::https://github.com/FDio/csit"
+ destination = "local/csit"
+ }
+ driver = "docker"
+ config {
+ image = "${image}"
+ command = "gluesparksubmit"
+ args = [
+ "--driver-memory", "20g",
+ "--executor-memory", "20g",
+ "--executor-cores", "2",
+ "--master", "local[2]",
+ "coverage_mrr_rls2210.py"
+ ]
+ work_dir = "/local/csit/csit.infra.etl"
+ }
+ env {
+ AWS_ACCESS_KEY_ID = "${aws_access_key_id}"
+ AWS_SECRET_ACCESS_KEY = "${aws_secret_access_key}"
+ AWS_DEFAULT_REGION = "${aws_default_region}"
+ OUT_AWS_ACCESS_KEY_ID = "${out_aws_access_key_id}"
+ OUT_AWS_SECRET_ACCESS_KEY = "${out_aws_secret_access_key}"
+ OUT_AWS_DEFAULT_REGION = "${out_aws_default_region}"
+ ${ envs }
+ }
+ resources {
+ cpu = ${cpu}
+ memory = ${memory}
+ }
+ }
+ task "${job_name}-coverage-ndrpdr" {
+ artifact {
+ source = "git::https://github.com/FDio/csit"
+ destination = "local/csit"
+ }
+ driver = "docker"
+ config {
+ image = "${image}"
+ command = "gluesparksubmit"
+ args = [
+ "--driver-memory", "20g",
+ "--executor-memory", "20g",
+ "--executor-cores", "2",
+ "--master", "local[2]",
+ "coverage_ndrpdr_rls2210.py"
+ ]
+ work_dir = "/local/csit/csit.infra.etl"
+ }
+ env {
+ AWS_ACCESS_KEY_ID = "${aws_access_key_id}"
+ AWS_SECRET_ACCESS_KEY = "${aws_secret_access_key}"
+ AWS_DEFAULT_REGION = "${aws_default_region}"
+ OUT_AWS_ACCESS_KEY_ID = "${out_aws_access_key_id}"
+ OUT_AWS_SECRET_ACCESS_KEY = "${out_aws_secret_access_key}"
+ OUT_AWS_DEFAULT_REGION = "${out_aws_default_region}"
+ ${ envs }
+ }
+ resources {
+ cpu = ${cpu}
+ memory = ${memory}
+ }
+ }
+ task "${job_name}-coverage-soak" {
+ artifact {
+ source = "git::https://github.com/FDio/csit"
+ destination = "local/csit"
+ }
+ driver = "docker"
+ config {
+ image = "${image}"
+ command = "gluesparksubmit"
+ args = [
+ "--driver-memory", "20g",
+ "--executor-memory", "20g",
+ "--executor-cores", "2",
+ "--master", "local[2]",
+ "coverage_soak_rls2210.py"
+ ]
+ work_dir = "/local/csit/csit.infra.etl"
+ }
+ env {
+ AWS_ACCESS_KEY_ID = "${aws_access_key_id}"
+ AWS_SECRET_ACCESS_KEY = "${aws_secret_access_key}"
+ AWS_DEFAULT_REGION = "${aws_default_region}"
+ OUT_AWS_ACCESS_KEY_ID = "${out_aws_access_key_id}"
+ OUT_AWS_SECRET_ACCESS_KEY = "${out_aws_secret_access_key}"
+ OUT_AWS_DEFAULT_REGION = "${out_aws_default_region}"
+ ${ envs }
+ }
+ resources {
+ cpu = ${cpu}
+ memory = ${memory}
+ }
+ }
+ task "${job_name}-iterative-mrr" {
+ artifact {
+ source = "git::https://github.com/FDio/csit"
+ destination = "local/csit"
+ }
+ driver = "docker"
+ config {
+ image = "${image}"
+ command = "gluesparksubmit"
+ args = [
+ "--driver-memory", "20g",
+ "--executor-memory", "20g",
+ "--executor-cores", "2",
+ "--master", "local[2]",
+ "iterative_mrr_rls2210.py"
+ ]
+ work_dir = "/local/csit/csit.infra.etl"
+ }
+ env {
+ AWS_ACCESS_KEY_ID = "${aws_access_key_id}"
+ AWS_SECRET_ACCESS_KEY = "${aws_secret_access_key}"
+ AWS_DEFAULT_REGION = "${aws_default_region}"
+ OUT_AWS_ACCESS_KEY_ID = "${out_aws_access_key_id}"
+ OUT_AWS_SECRET_ACCESS_KEY = "${out_aws_secret_access_key}"
+ OUT_AWS_DEFAULT_REGION = "${out_aws_default_region}"
+ ${ envs }
+ }
+ resources {
+ cpu = ${cpu}
+ memory = ${memory}
+ }
+ }
+ task "${job_name}-iterative-ndrpdr" {
+ artifact {
+ source = "git::https://github.com/FDio/csit"
+ destination = "local/csit"
+ }
+ driver = "docker"
+ config {
+ image = "${image}"
+ command = "gluesparksubmit"
+ args = [
+ "--driver-memory", "20g",
+ "--executor-memory", "20g",
+ "--executor-cores", "2",
+ "--master", "local[2]",
+ "iterative_ndrpdr_rls2210.py"
+ ]
+ work_dir = "/local/csit/csit.infra.etl"
+ }
+ env {
+ AWS_ACCESS_KEY_ID = "${aws_access_key_id}"
+ AWS_SECRET_ACCESS_KEY = "${aws_secret_access_key}"
+ AWS_DEFAULT_REGION = "${aws_default_region}"
+ OUT_AWS_ACCESS_KEY_ID = "${out_aws_access_key_id}"
+ OUT_AWS_SECRET_ACCESS_KEY = "${out_aws_secret_access_key}"
+ OUT_AWS_DEFAULT_REGION = "${out_aws_default_region}"
+ ${ envs }
+ }
+ resources {
+ cpu = ${cpu}
+ memory = ${memory}
+ }
+ }
+ task "${job_name}-iterative-soak" {
+ artifact {
+ source = "git::https://github.com/FDio/csit"
+ destination = "local/csit"
+ }
+ driver = "docker"
+ config {
+ image = "${image}"
+ command = "gluesparksubmit"
+ args = [
+ "--driver-memory", "20g",
+ "--executor-memory", "20g",
+ "--executor-cores", "2",
+ "--master", "local[2]",
+ "iterative_soak_rls2210.py"
+ ]
+ work_dir = "/local/csit/csit.infra.etl"
+ }
+ env {
+ AWS_ACCESS_KEY_ID = "${aws_access_key_id}"
+ AWS_SECRET_ACCESS_KEY = "${aws_secret_access_key}"
+ AWS_DEFAULT_REGION = "${aws_default_region}"
+ OUT_AWS_ACCESS_KEY_ID = "${out_aws_access_key_id}"
+ OUT_AWS_SECRET_ACCESS_KEY = "${out_aws_secret_access_key}"
+ OUT_AWS_DEFAULT_REGION = "${out_aws_default_region}"
+ ${ envs }
+ }
+ resources {
+ cpu = ${cpu}
+ memory = ${memory}
+ }
+ }
+ }
}
Code Review / csit.git / blobdiff