-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
from ipaddress import ip_network, ip_address
-from resources.libraries.python.IPUtil import IPUtil
+from resources.libraries.python.Constants import Constants
from resources.libraries.python.InterfaceUtil import InterfaceUtil, \
InterfaceStatusFlags
+from resources.libraries.python.IPAddress import IPAddress
+from resources.libraries.python.IPUtil import IPUtil, IpDscp, MPLS_LABEL_INVALID
from resources.libraries.python.PapiExecutor import PapiSocketExecutor
from resources.libraries.python.ssh import scp_node
from resources.libraries.python.topology import Topology
from resources.libraries.python.VatExecutor import VatExecutor
+IPSEC_UDP_PORT_NONE = 0xffff
+
+
def gen_key(length):
"""Generate random string as a key.
class IPsecProto(IntEnum):
"""IPsec protocol."""
- ESP = 1
- SEC_AH = 0
+ IPSEC_API_PROTO_ESP = 50
+ IPSEC_API_PROTO_AH = 51
class IPsecSadFlags(IntEnum):
"""IPsec Security Association Database flags."""
- IPSEC_API_SAD_FLAG_NONE = 0
- IPSEC_API_SAD_FLAG_IS_TUNNEL = 4
- IPSEC_API_SAD_FLAG_IS_TUNNEL_V6 = 8
+ IPSEC_API_SAD_FLAG_NONE = 0,
+ # Enable extended sequence numbers
+ IPSEC_API_SAD_FLAG_USE_ESN = 0x01,
+ # Enable Anti - replay
+ IPSEC_API_SAD_FLAG_USE_ANTI_REPLAY = 0x02,
+ # IPsec tunnel mode if non-zero, else transport mode
+ IPSEC_API_SAD_FLAG_IS_TUNNEL = 0x04,
+ # IPsec tunnel mode is IPv6 if non-zero, else IPv4 tunnel
+ # only valid if is_tunnel is non-zero
+ IPSEC_API_SAD_FLAG_IS_TUNNEL_V6 = 0x08,
+ # Enable UDP encapsulation for NAT traversal
+ IPSEC_API_SAD_FLAG_UDP_ENCAP = 0x10,
+ # IPsec SA is or inbound traffic
+ IPSEC_API_SAD_FLAG_IS_INBOUND = 0x40
+
+
+class TunnelEncpaDecapFlags(IntEnum):
+ """Flags controlling tunnel behaviour."""
+ TUNNEL_API_ENCAP_DECAP_FLAG_NONE = 0
+ # at encap, copy the DF bit of the payload into the tunnel header
+ TUNNEL_API_ENCAP_DECAP_FLAG_ENCAP_COPY_DF = 1
+ # at encap, set the DF bit in the tunnel header
+ TUNNEL_API_ENCAP_DECAP_FLAG_ENCAP_SET_DF = 2
+ # at encap, copy the DSCP bits of the payload into the tunnel header
+ TUNNEL_API_ENCAP_DECAP_FLAG_ENCAP_COPY_DSCP = 4
+ # at encap, copy the ECN bit of the payload into the tunnel header
+ TUNNEL_API_ENCAP_DECAP_FLAG_ENCAP_COPY_ECN = 8
+ # at decap, copy the ECN bit of the tunnel header into the payload
+ TUNNEL_API_ENCAP_DECAP_FLAG_ENCAP_SET_ECN = 16
+
+
+class TunnelMode(IntEnum):
+ """Tunnel modes."""
+ # point-to-point
+ TUNNEL_API_MODE_P2P = 0
+ # multi-point
+ TUNNEL_API_MODE_MP = 1
class IPsecUtil:
def get_integ_alg_key_len(integ_alg):
"""Return integrity algorithm key length.
+ None argument is accepted, returning zero.
+
:param integ_alg: Integrity algorithm.
- :type integ_alg: IntegAlg
+ :type integ_alg: Optional[IntegAlg]
:returns: Key length.
:rtype: int
"""
- return integ_alg.key_len
+ return 0 if integ_alg is None else integ_alg.key_len
@staticmethod
def get_integ_alg_scapy_name(integ_alg):
:returns: IPsecProto enum ESP object.
:rtype: IPsecProto
"""
- return int(IPsecProto.ESP)
+ return int(IPsecProto.IPSEC_API_PROTO_ESP)
@staticmethod
def ipsec_proto_ah():
:returns: IPsecProto enum AH object.
:rtype: IPsecProto
"""
- return int(IPsecProto.SEC_AH)
+ return int(IPsecProto.IPSEC_API_PROTO_AH)
@staticmethod
def vpp_ipsec_select_backend(node, protocol, index=1):
with PapiSocketExecutor(node) as papi_exec:
papi_exec.add(cmd, **args).get_reply(err_msg)
+ @staticmethod
+ def vpp_ipsec_set_async_mode(node, async_enable=1):
+ """Set IPsec async mode on|off.
+
+ :param node: VPP node to set IPsec async mode.
+ :param async_enable: Async mode on or off.
+ :type node: dict
+ :type async_enable: int
+ :raises RuntimeError: If failed to set IPsec async mode or if no API
+ reply received.
+ """
+ cmd = u"ipsec_set_async_mode"
+ err_msg = f"Failed to set IPsec async mode on host {node[u'host']}"
+ args = dict(
+ async_enable=async_enable
+ )
+ with PapiSocketExecutor(node) as papi_exec:
+ papi_exec.add(cmd, **args).get_reply(err_msg)
+
+ @staticmethod
+ def vpp_ipsec_crypto_sw_scheduler_set_worker(
+ node, worker_index, crypto_enable=False):
+ """Enable or disable crypto on specific vpp worker threads.
+
+ :param node: VPP node to enable or disable crypto for worker threads.
+ :param worker_index: VPP worker thread index.
+ :param crypto_enable: Disable or enable crypto work.
+ :type node: dict
+ :type worker_index: int
+ :type crypto_enable: bool
+ :raises RuntimeError: If failed to enable or disable crypto for worker
+ thread or if no API reply received.
+ """
+ cmd = u"crypto_sw_scheduler_set_worker"
+ err_msg = f"Failed to disable/enable crypto for worker thread " \
+ f"on host {node[u'host']}"
+ args = dict(
+ worker_index=worker_index,
+ crypto_enable=crypto_enable
+ )
+ with PapiSocketExecutor(node) as papi_exec:
+ papi_exec.add(cmd, **args).get_reply(err_msg)
+
@staticmethod
def vpp_ipsec_add_sad_entry(
node, sad_id, spi, crypto_alg, crypto_key, integ_alg=None,
:type spi: int
:type crypto_alg: CryptoAlg
:type crypto_key: str
- :type integ_alg: IntegAlg
+ :type integ_alg: Optional[IntegAlg]
:type integ_key: str
:type tunnel_src: str
:type tunnel_dst: str
src_addr = u""
dst_addr = u""
- cmd = u"ipsec_sad_entry_add_del"
+ cmd = u"ipsec_sad_entry_add_del_v2"
err_msg = f"Failed to add Security Association Database entry " \
f"on host {node[u'host']}"
sad_entry = dict(
flags=flags,
tunnel_src=str(src_addr),
tunnel_dst=str(dst_addr),
- protocol=int(IPsecProto.ESP)
+ tunnel_flags=int(
+ TunnelEncpaDecapFlags.TUNNEL_API_ENCAP_DECAP_FLAG_NONE
+ ),
+ dscp=int(IpDscp.IP_API_DSCP_CS0),
+ protocol=int(IPsecProto.IPSEC_API_PROTO_ESP),
+ udp_src_port=4500, # default value in api
+ udp_dst_port=4500 # default value in api
)
args = dict(
- is_add=1,
+ is_add=True,
entry=sad_entry
)
with PapiSocketExecutor(node) as papi_exec:
:type spi: int
:type crypto_alg: CryptoAlg
:type crypto_key: str
- :type integ_alg: IntegAlg
+ :type integ_alg: Optional[IntegAlg]
:type integ_key: str
:type tunnel_src: str
:type tunnel_dst: str
integ = f"integ-alg {integ_alg.alg_name} " \
f"integ-key {integ_key.hex()}" \
if integ_alg else u""
- tunnel = f"tunnel-src {src_addr + i * addr_incr} " \
- f"tunnel-dst {dst_addr + i * addr_incr}" \
+ tunnel = f"tunnel src {src_addr + i * addr_incr} " \
+ f"tunnel dst {dst_addr + i * addr_incr}" \
if tunnel_src and tunnel_dst else u""
conf = f"exec ipsec sa add {sad_id + i} esp spi {spi + i} "\
f"crypto-alg {crypto_alg.alg_name} " \
IPsecSadFlags.IPSEC_API_SAD_FLAG_IS_TUNNEL_V6
)
- cmd = u"ipsec_sad_entry_add_del"
+ cmd = u"ipsec_sad_entry_add_del_v2"
err_msg = f"Failed to add Security Association Database entry " \
f"on host {node[u'host']}"
flags=flags,
tunnel_src=str(src_addr),
tunnel_dst=str(dst_addr),
- protocol=int(IPsecProto.ESP)
+ tunnel_flags=int(
+ TunnelEncpaDecapFlags.TUNNEL_API_ENCAP_DECAP_FLAG_NONE
+ ),
+ dscp=int(IpDscp.IP_API_DSCP_CS0),
+ protocol=int(IPsecProto.IPSEC_API_PROTO_ESP),
+ udp_src_port=4500, # default value in api
+ udp_dst_port=4500 # default value in api
)
args = dict(
- is_add=1,
+ is_add=True,
entry=sad_entry
)
with PapiSocketExecutor(node) as papi_exec:
:type interface: str
:type raddr_range: int
"""
- laddr = ip_address(tunnel_src)
- raddr = ip_address(tunnel_dst)
- taddr = ip_address(traffic_addr)
- addr_incr = 1 << (128 - raddr_range) if laddr.version == 6 \
+ tunnel_src = ip_address(tunnel_src)
+ tunnel_dst = ip_address(tunnel_dst)
+ traffic_addr = ip_address(traffic_addr)
+ addr_incr = 1 << (128 - raddr_range) if tunnel_src.version == 6 \
else 1 << (32 - raddr_range)
if int(n_tunnels) > 10:
if_name = Topology.get_interface_name(node, interface)
for i in range(n_tunnels):
conf = f"exec set interface ip address {if_name} " \
- f"{laddr + i * addr_incr}/{raddr_range}\n" \
- f"exec ip route add {taddr + i}/" \
- f"{128 if taddr.version == 6 else 32} " \
- f"via {raddr + i * addr_incr} {if_name}\n"
+ f"{tunnel_src + i * addr_incr}/{raddr_range}\n" \
+ f"exec ip route add {traffic_addr + i}/" \
+ f"{128 if traffic_addr.version == 6 else 32} " \
+ f"via {tunnel_dst + i * addr_incr} {if_name}\n"
tmp_file.write(conf)
- vat = VatExecutor()
- vat.execute_script(
+ VatExecutor().execute_script(
tmp_filename, node, timeout=300, json_out=False,
copy_on_execute=True
)
with PapiSocketExecutor(node) as papi_exec:
for i in range(n_tunnels):
args1[u"prefix"] = IPUtil.create_prefix_object(
- laddr + i * addr_incr, raddr_range
+ tunnel_src + i * addr_incr, raddr_range
)
args2[u"route"] = IPUtil.compose_vpp_route_structure(
- node, taddr + i,
- prefix_len=128 if taddr.version == 6 else 32,
- interface=interface, gateway=raddr + i * addr_incr
+ node, traffic_addr + i,
+ prefix_len=128 if traffic_addr.version == 6 else 32,
+ interface=interface, gateway=tunnel_dst + i * addr_incr
)
history = bool(not 1 < i < n_tunnels - 2)
papi_exec.add(cmd1, history=history, **args1).\
err_msg = f"Failed to add Security Policy Database " \
f"on host {node[u'host']}"
args = dict(
- is_add=1,
+ is_add=True,
spd_id=int(spd_id)
)
with PapiSocketExecutor(node) as papi_exec:
err_msg = f"Failed to add interface {interface} to Security Policy " \
f"Database {spd_id} on host {node[u'host']}"
args = dict(
- is_add=1,
+ is_add=True,
sw_if_index=InterfaceUtil.get_interface_index(node, interface),
spd_id=int(spd_id)
)
spd_entry = dict(
spd_id=int(spd_id),
priority=int(priority),
- is_outbound=0 if inbound else 1,
+ is_outbound=not inbound,
sa_id=int(sa_id) if sa_id else 0,
policy=action.policy_int_repr,
protocol=int(proto) if proto else 0,
- remote_address_start=IPUtil.create_ip_address_object(
+ remote_address_start=IPAddress.create_ip_address_object(
ip_network(raddr_range, strict=False).network_address
),
- remote_address_stop=IPUtil.create_ip_address_object(
+ remote_address_stop=IPAddress.create_ip_address_object(
ip_network(raddr_range, strict=False).broadcast_address
),
- local_address_start=IPUtil.create_ip_address_object(
+ local_address_start=IPAddress.create_ip_address_object(
ip_network(laddr_range, strict=False).network_address
),
- local_address_stop=IPUtil.create_ip_address_object(
+ local_address_stop=IPAddress.create_ip_address_object(
ip_network(laddr_range, strict=False).broadcast_address
),
remote_port_start=int(rport_range.split(u"-")[0]) if rport_range
else 65535
)
args = dict(
- is_add=1,
+ is_add=True,
entry=spd_entry
)
with PapiSocketExecutor(node) as papi_exec:
spd_entry = dict(
spd_id=int(spd_id),
priority=int(priority),
- is_outbound=0 if inbound else 1,
+ is_outbound=not inbound,
sa_id=int(sa_id) if sa_id else 0,
- policy=IPsecUtil.policy_action_protect().policy_int_repr,
+ policy=getattr(PolicyAction.PROTECT, u"policy_int_repr"),
protocol=0,
- remote_address_start=IPUtil.create_ip_address_object(raddr_ip),
- remote_address_stop=IPUtil.create_ip_address_object(raddr_ip),
- local_address_start=IPUtil.create_ip_address_object(
+ remote_address_start=IPAddress.create_ip_address_object(raddr_ip),
+ remote_address_stop=IPAddress.create_ip_address_object(raddr_ip),
+ local_address_start=IPAddress.create_ip_address_object(
ip_network(laddr_range, strict=False).network_address
),
- local_address_stop=IPUtil.create_ip_address_object(
+ local_address_stop=IPAddress.create_ip_address_object(
ip_network(laddr_range, strict=False).broadcast_address
),
remote_port_start=0,
local_port_stop=65535
)
args = dict(
- is_add=1,
+ is_add=True,
entry=spd_entry
)
with PapiSocketExecutor(node) as papi_exec:
for i in range(n_entries):
args[u"entry"][u"remote_address_start"][u"un"] = \
- IPUtil.union_addr(raddr_ip + i)
+ IPAddress.union_addr(raddr_ip + i)
args[u"entry"][u"remote_address_stop"][u"un"] = \
- IPUtil.union_addr(raddr_ip + i)
+ IPAddress.union_addr(raddr_ip + i)
history = bool(not 1 < i < n_entries - 2)
papi_exec.add(cmd, history=history, **args)
papi_exec.get_replies(err_msg)
@staticmethod
- def vpp_ipsec_create_tunnel_interfaces(
- nodes, if1_ip_addr, if2_ip_addr, if1_key, if2_key, n_tunnels,
- crypto_alg, integ_alg, raddr_ip1, raddr_ip2, raddr_range,
- existing_tunnels=0):
- """Create multiple IPsec tunnel interfaces between two VPP nodes.
+ def _ipsec_create_tunnel_interfaces_dut1_vat(
+ nodes, tun_ips, if1_key, if2_key, n_tunnels, crypto_alg, integ_alg,
+ raddr_ip2, addr_incr, spi_d, existing_tunnels=0):
+ """Create multiple IPsec tunnel interfaces on DUT1 node using VAT.
+
+ Generate random keys and return them (so DUT2 or TG can decrypt).
:param nodes: VPP nodes to create tunnel interfaces.
- :param if1_ip_addr: VPP node 1 interface IPv4/IPv6 address.
- :param if2_ip_addr: VPP node 2 interface IPv4/IPv6 address.
+ :param tun_ips: Dictionary with VPP node 1 ipsec tunnel interface
+ IPv4/IPv6 address (ip1) and VPP node 2 ipsec tunnel interface
+ IPv4/IPv6 address (ip2).
:param if1_key: VPP node 1 interface key from topology file.
- :param if2_key: VPP node 2 interface key from topology file.
+ :param if2_key: VPP node 2 / TG node (in case of 2-node topology)
+ interface key from topology file.
:param n_tunnels: Number of tunnel interfaces to be there at the end.
:param crypto_alg: The encryption algorithm name.
:param integ_alg: The integrity algorithm name.
- :param raddr_ip1: Policy selector remote IPv4/IPv6 start address for the
- first tunnel in direction node1->node2.
:param raddr_ip2: Policy selector remote IPv4/IPv6 start address for the
first tunnel in direction node2->node1.
- :param raddr_range: Mask specifying range of Policy selector Remote
- IPv4/IPv6 addresses. Valid values are from 1 to 32 in case of IPv4
- and to 128 in case of IPv6.
+ :param spi_d: Dictionary with SPIs for VPP node 1 and VPP node 2.
+ :param addr_incr: IP / IPv6 address incremental step.
:param existing_tunnels: Number of tunnel interfaces before creation.
Useful mainly for reconf tests. Default 0.
:type nodes: dict
- :type if1_ip_addr: str
- :type if2_ip_addr: str
+ :type tun_ips: dict
:type if1_key: str
:type if2_key: str
:type n_tunnels: int
:type crypto_alg: CryptoAlg
- :type integ_alg: IntegAlg
- :type raddr_ip1: string
- :type raddr_ip2: string
- :type raddr_range: int
+ :type integ_alg: Optional[IntegAlg]
+ :type raddr_ip2: IPv4Address or IPv6Address
+ :type addr_incr: int
+ :type spi_d: dict
:type existing_tunnels: int
+ :returns: Generated ckeys and ikeys.
+ :rtype: List[bytes], List[bytes]
"""
- n_tunnels = int(n_tunnels)
- existing_tunnels = int(existing_tunnels)
- spi_1 = 100000
- spi_2 = 200000
- if1_ip = ip_address(if1_ip_addr)
- if2_ip = ip_address(if2_ip_addr)
- raddr_ip1 = ip_address(raddr_ip1)
- raddr_ip2 = ip_address(raddr_ip2)
- addr_incr = 1 << (128 - raddr_range) if if1_ip.version == 6 \
- else 1 << (32 - raddr_range)
+ tmp_fn1 = u"/tmp/ipsec_create_tunnel_dut1.config"
+ if1_n = Topology.get_interface_name(nodes[u"DUT1"], if1_key)
- if n_tunnels - existing_tunnels > 10:
- tmp_fn1 = u"/tmp/ipsec_create_tunnel_dut1.config"
- tmp_fn2 = u"/tmp/ipsec_create_tunnel_dut2.config"
- if1_n = Topology.get_interface_name(nodes[u"DUT1"], if1_key)
- if2_n = Topology.get_interface_name(nodes[u"DUT2"], if2_key)
- mask = 96 if if2_ip.version == 6 else 24
- mask2 = 128 if if2_ip.version == 6 else 32
- vat = VatExecutor()
- with open(tmp_fn1, 'w') as tmp_f1, open(tmp_fn2, 'w') as tmp_f2:
- rmac = Topology.get_interface_mac(nodes[u"DUT2"], if2_key)
- if not existing_tunnels:
- tmp_f1.write(
- f"exec create loopback interface\n"
- f"exec set interface state loop0 up\n"
- f"exec set interface ip address "
- f"{if1_n} {if2_ip - 1}/{mask}\n"
- f"exec set ip neighbor {if1_n} {if2_ip}/{mask2} {rmac}"
- f" static\n"
- )
- tmp_f2.write(
- f"exec set interface ip address {if2_n}"
- f" {if2_ip}/{mask}\n"
- )
- for i in range(existing_tunnels, n_tunnels):
- ckey = gen_key(
- IPsecUtil.get_crypto_alg_key_len(crypto_alg)
- ).hex()
- if integ_alg:
- ikey = gen_key(
- IPsecUtil.get_integ_alg_key_len(integ_alg)
- ).hex()
- integ = f"integ_alg {integ_alg.alg_name} " \
- f"local_integ_key {ikey} remote_integ_key {ikey} "
- else:
- integ = u""
- tmp_f1.write(
- f"exec set interface ip address loop0 "
- f"{if1_ip + i * addr_incr}/32\n"
- f"ipsec_tunnel_if_add_del "
- f"local_spi {spi_1 + i} remote_spi {spi_2 + i} "
- f"crypto_alg {crypto_alg.alg_name} "
- f"local_crypto_key {ckey} remote_crypto_key {ckey} "
- f"{integ} "
- f"local_ip {if1_ip + i * addr_incr} "
- f"remote_ip {if2_ip} "
- f"instance {i}\n"
- )
- tmp_f2.write(
- f"ipsec_tunnel_if_add_del "
- f"local_spi {spi_2 + i} remote_spi {spi_1 + i} "
- f"crypto_alg {crypto_alg.alg_name} "
- f"local_crypto_key {ckey} remote_crypto_key {ckey} "
- f"{integ} "
- f"local_ip {if2_ip} "
- f"remote_ip {if1_ip + i * addr_incr} "
- f"instance {i}\n"
- )
- vat.execute_script(
- tmp_fn1, nodes[u"DUT1"], timeout=1800, json_out=False,
- copy_on_execute=True,
- history=bool(n_tunnels < 100)
- )
- vat.execute_script(
- tmp_fn2, nodes[u"DUT2"], timeout=1800, json_out=False,
- copy_on_execute=True,
- history=bool(n_tunnels < 100)
- )
- os.remove(tmp_fn1)
- os.remove(tmp_fn2)
-
- with open(tmp_fn1, 'w') as tmp_f1, open(tmp_fn2, 'w') as tmp_f2:
- if not existing_tunnels:
- tmp_f2.write(
- f"exec ip route add {if1_ip}/8 via {if2_ip - 1}"
- f" {if2_n}\n"
- )
- for i in range(existing_tunnels, n_tunnels):
- tmp_f1.write(
- f"exec set interface unnumbered ipip{i} use {if1_n}\n"
- f"exec set interface state ipip{i} up\n"
- f"exec ip route add {raddr_ip2 + i}/{mask2} "
- f"via ipip{i}\n"
- )
- tmp_f2.write(
- f"exec set interface unnumbered ipip{i} use {if2_n}\n"
- f"exec set interface state ipip{i} up\n"
- f"exec ip route add {raddr_ip1 + i}/{mask2} "
- f"via ipip{i}\n"
- )
- vat.execute_script(
- tmp_fn1, nodes[u"DUT1"], timeout=1800, json_out=False,
- copy_on_execute=True,
- history=bool(n_tunnels < 100)
- )
- vat.execute_script(
- tmp_fn2, nodes[u"DUT2"], timeout=1800, json_out=False,
- copy_on_execute=True,
- history=bool(n_tunnels < 100)
- )
- os.remove(tmp_fn1)
- os.remove(tmp_fn2)
- return
+ ckeys = [bytes()] * existing_tunnels
+ ikeys = [bytes()] * existing_tunnels
- if not existing_tunnels:
- with PapiSocketExecutor(nodes[u"DUT1"]) as papi_exec:
- # Create loopback interface on DUT1, set it to up state
- cmd1 = u"create_loopback"
- args1 = dict(
- mac_address=0
+ vat = VatExecutor()
+ with open(tmp_fn1, u"w") as tmp_f1:
+ rmac = Topology.get_interface_mac(nodes[u"DUT2"], if2_key) \
+ if u"DUT2" in nodes.keys() \
+ else Topology.get_interface_mac(nodes[u"TG"], if2_key)
+ if not existing_tunnels:
+ tmp_f1.write(
+ f"exec create loopback interface\n"
+ f"exec set interface state loop0 up\n"
+ f"exec set interface ip address {if1_n} "
+ f"{tun_ips[u'ip2'] - 1}/"
+ f"{len(tun_ips[u'ip2'].packed)*8*3//4}\n"
+ f"exec set ip neighbor {if1_n} {tun_ips[u'ip2']} {rmac} "
+ f"static\n"
)
- err_msg = f"Failed to create loopback interface " \
- f"on host {nodes[u'DUT1'][u'host']}"
- loop_sw_if_idx = papi_exec.add(cmd1, **args1).\
- get_sw_if_index(err_msg)
- cmd1 = u"sw_interface_set_flags"
- args1 = dict(
- sw_if_index=loop_sw_if_idx,
- flags=InterfaceStatusFlags.IF_STATUS_API_FLAG_ADMIN_UP.value
+ for i in range(existing_tunnels, n_tunnels):
+ ckeys.append(
+ gen_key(IPsecUtil.get_crypto_alg_key_len(crypto_alg))
)
- err_msg = f"Failed to set loopback interface state up " \
- f"on host {nodes[u'DUT1'][u'host']}"
- papi_exec.add(cmd1, **args1).get_reply(err_msg)
- # Set IP address on VPP node 1 interface
- cmd1 = u"sw_interface_add_del_address"
- args1 = dict(
- sw_if_index=InterfaceUtil.get_interface_index(
+ ikeys.append(
+ gen_key(IPsecUtil.get_integ_alg_key_len(integ_alg))
+ )
+ if integ_alg:
+ integ = f"integ-alg {integ_alg.alg_name} " \
+ f"integ-key {ikeys[i].hex()} "
+ else:
+ integ = u""
+ tmp_f1.write(
+ f"exec set interface ip address loop0 "
+ f"{tun_ips[u'ip1'] + i * addr_incr}/32\n"
+ f"exec create ipip tunnel "
+ f"src {tun_ips[u'ip1'] + i * addr_incr} "
+ f"dst {tun_ips[u'ip2']} "
+ f"p2p\n"
+ f"exec ipsec sa add {i} "
+ f"spi {spi_d[u'spi_1'] + i} "
+ f"crypto-alg {crypto_alg.alg_name} "
+ f"crypto-key {ckeys[i].hex()} "
+ f"{integ}"
+ f"esp\n"
+ f"exec ipsec sa add {100000 + i} "
+ f"spi {spi_d[u'spi_2'] + i} "
+ f"crypto-alg {crypto_alg.alg_name} "
+ f"crypto-key {ckeys[i].hex()} "
+ f"{integ}"
+ f"esp\n"
+ f"exec ipsec tunnel protect ipip{i} "
+ f"sa-out {i} "
+ f"sa-in {100000 + i} "
+ f"add\n"
+ )
+ vat.execute_script(
+ tmp_fn1, nodes[u"DUT1"], timeout=1800, json_out=False,
+ copy_on_execute=True,
+ history=bool(n_tunnels < 100)
+ )
+ os.remove(tmp_fn1)
+
+ with open(tmp_fn1, 'w') as tmp_f1:
+ for i in range(existing_tunnels, n_tunnels):
+ tmp_f1.write(
+ f"exec set interface unnumbered ipip{i} use {if1_n}\n"
+ f"exec set interface state ipip{i} up\n"
+ f"exec ip route add "
+ f"{raddr_ip2 + i}/{len(raddr_ip2.packed)*8} "
+ f"via ipip{i}\n"
+ )
+ vat.execute_script(
+ tmp_fn1, nodes[u"DUT1"], timeout=1800, json_out=False,
+ copy_on_execute=True,
+ history=bool(n_tunnels < 100)
+ )
+ os.remove(tmp_fn1)
+
+ return ckeys, ikeys
+
+ @staticmethod
+ def _ipsec_create_tunnel_interfaces_dut2_vat(
+ nodes, tun_ips, if2_key, n_tunnels, crypto_alg, ckeys, integ_alg,
+ ikeys, raddr_ip1, addr_incr, spi_d, existing_tunnels=0):
+ """Create multiple IPsec tunnel interfaces on DUT2 node using VAT.
+
+ This method accesses keys generated by DUT1 method
+ and does not return anything.
+
+ :param nodes: VPP nodes to create tunnel interfaces.
+ :param tun_ips: Dictionary with VPP node 1 ipsec tunnel interface
+ IPv4/IPv6 address (ip1) and VPP node 2 ipsec tunnel interface
+ IPv4/IPv6 address (ip2).
+ :param if2_key: VPP node 2 / TG node (in case of 2-node topology)
+ interface key from topology file.
+ :param n_tunnels: Number of tunnel interfaces to be there at the end.
+ :param crypto_alg: The encryption algorithm name.
+ :param ckeys: List of encryption keys.
+ :param integ_alg: The integrity algorithm name.
+ :param ikeys: List of integrity keys.
+ :param spi_d: Dictionary with SPIs for VPP node 1 and VPP node 2.
+ :param addr_incr: IP / IPv6 address incremental step.
+ :param existing_tunnels: Number of tunnel interfaces before creation.
+ Useful mainly for reconf tests. Default 0.
+ :type nodes: dict
+ :type tun_ips: dict
+ :type if2_key: str
+ :type n_tunnels: int
+ :type crypto_alg: CryptoAlg
+ :type ckeys: Sequence[bytes]
+ :type integ_alg: Optional[IntegAlg]
+ :type ikeys: Sequence[bytes]
+ :type addr_incr: int
+ :type spi_d: dict
+ :type existing_tunnels: int
+ """
+ tmp_fn2 = u"/tmp/ipsec_create_tunnel_dut2.config"
+ if2_n = Topology.get_interface_name(nodes[u"DUT2"], if2_key)
+
+ vat = VatExecutor()
+ with open(tmp_fn2, 'w') as tmp_f2:
+ if not existing_tunnels:
+ tmp_f2.write(
+ f"exec set interface ip address {if2_n}"
+ f" {tun_ips[u'ip2']}/{len(tun_ips[u'ip2'].packed)*8*3/4}\n"
+ )
+ for i in range(existing_tunnels, n_tunnels):
+ if integ_alg:
+ integ = f"integ-alg {integ_alg.alg_name} " \
+ f"integ-key {ikeys[i].hex()} "
+ else:
+ integ = u""
+ tmp_f2.write(
+ f"exec create ipip tunnel "
+ f"src {tun_ips[u'ip2']} "
+ f"dst {tun_ips[u'ip1'] + i * addr_incr} "
+ f"p2p\n"
+ f"exec ipsec sa add {100000 + i} "
+ f"spi {spi_d[u'spi_2'] + i} "
+ f"crypto-alg {crypto_alg.alg_name} "
+ f"crypto-key {ckeys[i].hex()} "
+ f"{integ}"
+ f"esp\n"
+ f"exec ipsec sa add {i} "
+ f"spi {spi_d[u'spi_1'] + i} "
+ f"crypto-alg {crypto_alg.alg_name} "
+ f"crypto-key {ckeys[i].hex()} "
+ f"{integ}"
+ f"esp\n"
+ f"exec ipsec tunnel protect ipip{i} "
+ f"sa-out {100000 + i} "
+ f"sa-in {i} "
+ f"add\n"
+ )
+ vat.execute_script(
+ tmp_fn2, nodes[u"DUT2"], timeout=1800, json_out=False,
+ copy_on_execute=True,
+ history=bool(n_tunnels < 100)
+ )
+ os.remove(tmp_fn2)
+
+ with open(tmp_fn2, 'w') as tmp_f2:
+ if not existing_tunnels:
+ tmp_f2.write(
+ f"exec ip route add {tun_ips[u'ip1']}/8 "
+ f"via {tun_ips[u'ip2'] - 1} {if2_n}\n"
+ )
+ for i in range(existing_tunnels, n_tunnels):
+ tmp_f2.write(
+ f"exec set interface unnumbered ipip{i} use {if2_n}\n"
+ f"exec set interface state ipip{i} up\n"
+ f"exec ip route add "
+ f"{raddr_ip1 + i}/{len(raddr_ip1.packed)*8} "
+ f"via ipip{i}\n"
+ )
+ vat.execute_script(
+ tmp_fn2, nodes[u"DUT2"], timeout=1800, json_out=False,
+ copy_on_execute=True,
+ history=bool(n_tunnels < 100)
+ )
+ os.remove(tmp_fn2)
+
+ @staticmethod
+ def _ipsec_create_loopback_dut1_papi(nodes, tun_ips, if1_key, if2_key):
+ """Create loopback interface and set IP address on VPP node 1 interface
+ using PAPI.
+
+ :param nodes: VPP nodes to create tunnel interfaces.
+ :param tun_ips: Dictionary with VPP node 1 ipsec tunnel interface
+ IPv4/IPv6 address (ip1) and VPP node 2 ipsec tunnel interface
+ IPv4/IPv6 address (ip2).
+ :param if1_key: VPP node 1 interface key from topology file.
+ :param if2_key: VPP node 2 / TG node (in case of 2-node topology)
+ interface key from topology file.
+ :type nodes: dict
+ :type tun_ips: dict
+ :type if1_key: str
+ :type if2_key: str
+ """
+ with PapiSocketExecutor(nodes[u"DUT1"]) as papi_exec:
+ # Create loopback interface on DUT1, set it to up state
+ cmd = u"create_loopback_instance"
+ args = dict(
+ mac_address=0,
+ is_specified=False,
+ user_instance=0,
+ )
+ err_msg = f"Failed to create loopback interface " \
+ f"on host {nodes[u'DUT1'][u'host']}"
+ loop_sw_if_idx = papi_exec.add(cmd, **args). \
+ get_sw_if_index(err_msg)
+ cmd = u"sw_interface_set_flags"
+ args = dict(
+ sw_if_index=loop_sw_if_idx,
+ flags=InterfaceStatusFlags.IF_STATUS_API_FLAG_ADMIN_UP.value
+ )
+ err_msg = f"Failed to set loopback interface state up " \
+ f"on host {nodes[u'DUT1'][u'host']}"
+ papi_exec.add(cmd, **args).get_reply(err_msg)
+ # Set IP address on VPP node 1 interface
+ cmd = u"sw_interface_add_del_address"
+ args = dict(
+ sw_if_index=InterfaceUtil.get_interface_index(
+ nodes[u"DUT1"], if1_key
+ ),
+ is_add=True,
+ del_all=False,
+ prefix=IPUtil.create_prefix_object(
+ tun_ips[u"ip2"] - 1, 96 if tun_ips[u"ip2"].version == 6
+ else 24
+ )
+ )
+ err_msg = f"Failed to set IP address on interface {if1_key} " \
+ f"on host {nodes[u'DUT1'][u'host']}"
+ papi_exec.add(cmd, **args).get_reply(err_msg)
+ cmd2 = u"ip_neighbor_add_del"
+ args2 = dict(
+ is_add=1,
+ neighbor=dict(
+ sw_if_index=Topology.get_interface_sw_index(
nodes[u"DUT1"], if1_key
),
- is_add=True,
- del_all=False,
- prefix=IPUtil.create_prefix_object(
- if2_ip - 1, 96 if if2_ip.version == 6 else 24
- )
- )
- err_msg = f"Failed to set IP address on interface {if1_key} " \
- f"on host {nodes[u'DUT1'][u'host']}"
- papi_exec.add(cmd1, **args1).get_reply(err_msg)
- cmd4 = u"ip_neighbor_add_del"
- args4 = dict(
- is_add=1,
- neighbor=dict(
- sw_if_index=Topology.get_interface_sw_index(
- nodes[u"DUT1"], if1_key
- ),
- flags=1,
- mac_address=str(
- Topology.get_interface_mac(nodes[u"DUT2"], if2_key)
- ),
- ip_address=str(ip_address(if2_ip_addr))
- )
+ flags=1,
+ mac_address=str(
+ Topology.get_interface_mac(nodes[u"DUT2"], if2_key)
+ if u"DUT2" in nodes.keys()
+ else Topology.get_interface_mac(
+ nodes[u"TG"], if2_key
+ )
+ ),
+ ip_address=tun_ips[u"ip2"].compressed
)
- err_msg = f"Failed to add IP neighbor on interface {if1_key}"
- papi_exec.add(cmd4, **args4).get_reply(err_msg)
+ )
+ err_msg = f"Failed to add IP neighbor on interface {if1_key}"
+ papi_exec.add(cmd2, **args2).get_reply(err_msg)
+
+ return loop_sw_if_idx
+
+ @staticmethod
+ def _ipsec_create_tunnel_interfaces_dut1_papi(
+ nodes, tun_ips, if1_key, if2_key, n_tunnels, crypto_alg, integ_alg,
+ raddr_ip2, addr_incr, spi_d, existing_tunnels=0):
+ """Create multiple IPsec tunnel interfaces on DUT1 node using PAPI.
+
+ Generate random keys and return them (so DUT2 or TG can decrypt).
+
+ :param nodes: VPP nodes to create tunnel interfaces.
+ :param tun_ips: Dictionary with VPP node 1 ipsec tunnel interface
+ IPv4/IPv6 address (ip1) and VPP node 2 ipsec tunnel interface
+ IPv4/IPv6 address (ip2).
+ :param if1_key: VPP node 1 interface key from topology file.
+ :param if2_key: VPP node 2 / TG node (in case of 2-node topology)
+ interface key from topology file.
+ :param n_tunnels: Number of tunnel interfaces to be there at the end.
+ :param crypto_alg: The encryption algorithm name.
+ :param integ_alg: The integrity algorithm name.
+ :param raddr_ip2: Policy selector remote IPv4/IPv6 start address for the
+ first tunnel in direction node2->node1.
+ :param spi_d: Dictionary with SPIs for VPP node 1 and VPP node 2.
+ :param addr_incr: IP / IPv6 address incremental step.
+ :param existing_tunnels: Number of tunnel interfaces before creation.
+ Useful mainly for reconf tests. Default 0.
+ :type nodes: dict
+ :type tun_ips: dict
+ :type if1_key: str
+ :type if2_key: str
+ :type n_tunnels: int
+ :type crypto_alg: CryptoAlg
+ :type integ_alg: Optional[IntegAlg]
+ :type raddr_ip2: IPv4Address or IPv6Address
+ :type addr_incr: int
+ :type spi_d: dict
+ :type existing_tunnels: int
+ :returns: Generated ckeys and ikeys.
+ :rtype: List[bytes], List[bytes]
+ """
+ if not existing_tunnels:
+ loop_sw_if_idx = IPsecUtil._ipsec_create_loopback_dut1_papi(
+ nodes, tun_ips, if1_key, if2_key
+ )
else:
- # Executor not open, as InterfaceUtil will open its own.
loop_sw_if_idx = InterfaceUtil.vpp_get_interface_sw_index(
- nodes[u"DUT1"], u"loop0")
- cmd1 = u"sw_interface_add_del_address"
+ nodes[u"DUT1"], u"loop0"
+ )
with PapiSocketExecutor(nodes[u"DUT1"]) as papi_exec:
- # Configure IPsec tunnel interfaces
- args1 = dict(
+ # Configure IP addresses on loop0 interface
+ cmd = u"sw_interface_add_del_address"
+ args = dict(
sw_if_index=loop_sw_if_idx,
is_add=True,
del_all=False,
prefix=None
)
- cmd2 = u"ipsec_tunnel_if_add_del"
- args2 = dict(
- is_add=1,
- local_ip=None,
- remote_ip=None,
- local_spi=0,
- remote_spi=0,
- crypto_alg=crypto_alg.alg_int_repr,
- local_crypto_key_len=0,
- local_crypto_key=None,
- remote_crypto_key_len=0,
- remote_crypto_key=None,
- integ_alg=integ_alg.alg_int_repr if integ_alg else 0,
- local_integ_key_len=0,
- local_integ_key=None,
- remote_integ_key_len=0,
- remote_integ_key=None,
- tx_table_id=0
+ for i in range(existing_tunnels, n_tunnels):
+ args[u"prefix"] = IPUtil.create_prefix_object(
+ tun_ips[u"ip1"] + i * addr_incr,
+ 128 if tun_ips[u"ip1"].version == 6 else 32
+ )
+ papi_exec.add(
+ cmd, history=bool(not 1 < i < n_tunnels - 2), **args
+ )
+ # Configure IPIP tunnel interfaces
+ cmd = u"ipip_add_tunnel"
+ ipip_tunnel = dict(
+ instance=Constants.BITWISE_NON_ZERO,
+ src=None,
+ dst=None,
+ table_id=0,
+ flags=int(
+ TunnelEncpaDecapFlags.TUNNEL_API_ENCAP_DECAP_FLAG_NONE
+ ),
+ mode=int(TunnelMode.TUNNEL_API_MODE_P2P),
+ dscp=int(IpDscp.IP_API_DSCP_CS0)
+ )
+ args = dict(
+ tunnel=ipip_tunnel
+ )
+ ipip_tunnels = [None] * existing_tunnels
+ for i in range(existing_tunnels, n_tunnels):
+ args[u"tunnel"][u"src"] = IPAddress.create_ip_address_object(
+ tun_ips[u"ip1"] + i * addr_incr
+ )
+ args[u"tunnel"][u"dst"] = IPAddress.create_ip_address_object(
+ tun_ips[u"ip2"]
+ )
+ papi_exec.add(
+ cmd, history=bool(not 1 < i < n_tunnels - 2), **args
+ )
+ err_msg = f"Failed to add IPIP tunnel interfaces on host" \
+ f" {nodes[u'DUT1'][u'host']}"
+ ipip_tunnels.extend(
+ [
+ reply[u"sw_if_index"]
+ for reply in papi_exec.get_replies(err_msg)
+ if u"sw_if_index" in reply
+ ]
+ )
+ # Configure IPSec SAD entries
+ ckeys = [bytes()] * existing_tunnels
+ ikeys = [bytes()] * existing_tunnels
+ cmd = u"ipsec_sad_entry_add_del_v2"
+ c_key = dict(
+ length=0,
+ data=None
+ )
+ i_key = dict(
+ length=0,
+ data=None
+ )
+ sad_entry = dict(
+ sad_id=None,
+ spi=None,
+ protocol=int(IPsecProto.IPSEC_API_PROTO_ESP),
+ crypto_algorithm=crypto_alg.alg_int_repr,
+ crypto_key=c_key,
+ integrity_algorithm=integ_alg.alg_int_repr if integ_alg else 0,
+ integrity_key=i_key,
+ flags=None,
+ tunnel_src=0,
+ tunnel_dst=0,
+ tunnel_flags=int(
+ TunnelEncpaDecapFlags.TUNNEL_API_ENCAP_DECAP_FLAG_NONE
+ ),
+ dscp=int(IpDscp.IP_API_DSCP_CS0),
+ table_id=0,
+ salt=0,
+ udp_src_port=IPSEC_UDP_PORT_NONE,
+ udp_dst_port=IPSEC_UDP_PORT_NONE
+ )
+ args = dict(
+ is_add=True,
+ entry=sad_entry
)
- err_msg = f"Failed to add IPsec tunnel interfaces " \
- f"on host {nodes[u'DUT1'][u'host']}"
- ipsec_tunnels = [None] * existing_tunnels
- ckeys = [None] * existing_tunnels
- ikeys = [None] * existing_tunnels
for i in range(existing_tunnels, n_tunnels):
ckeys.append(
gen_key(IPsecUtil.get_crypto_alg_key_len(crypto_alg))
)
+ ikeys.append(
+ gen_key(IPsecUtil.get_integ_alg_key_len(integ_alg))
+ )
+ # SAD entry for outband / tx path
+ args[u"entry"][u"sad_id"] = i
+ args[u"entry"][u"spi"] = spi_d[u"spi_1"] + i
+
+ args[u"entry"][u"crypto_key"][u"length"] = len(ckeys[i])
+ args[u"entry"][u"crypto_key"][u"data"] = ckeys[i]
if integ_alg:
- ikeys.append(
- gen_key(IPsecUtil.get_integ_alg_key_len(integ_alg))
- )
- args1[u"prefix"] = IPUtil.create_prefix_object(
- if1_ip + i * addr_incr, 128 if if1_ip.version == 6 else 32
+ args[u"entry"][u"integrity_key"][u"length"] = len(ikeys[i])
+ args[u"entry"][u"integrity_key"][u"data"] = ikeys[i]
+ args[u"entry"][u"flags"] = int(
+ IPsecSadFlags.IPSEC_API_SAD_FLAG_NONE
)
- args2[u"local_spi"] = spi_1 + i
- args2[u"remote_spi"] = spi_2 + i
- args2[u"local_ip"] = IPUtil.create_ip_address_object(
- if1_ip + i * addr_incr
+ papi_exec.add(
+ cmd, history=bool(not 1 < i < n_tunnels - 2), **args
)
- args2[u"remote_ip"] = IPUtil.create_ip_address_object(if2_ip)
- args2[u"local_crypto_key_len"] = len(ckeys[i])
- args2[u"local_crypto_key"] = ckeys[i]
- args2[u"remote_crypto_key_len"] = len(ckeys[i])
- args2[u"remote_crypto_key"] = ckeys[i]
+ # SAD entry for inband / rx path
+ args[u"entry"][u"sad_id"] = 100000 + i
+ args[u"entry"][u"spi"] = spi_d[u"spi_2"] + i
+
+ args[u"entry"][u"crypto_key"][u"length"] = len(ckeys[i])
+ args[u"entry"][u"crypto_key"][u"data"] = ckeys[i]
if integ_alg:
- args2[u"local_integ_key_len"] = len(ikeys[i])
- args2[u"local_integ_key"] = ikeys[i]
- args2[u"remote_integ_key_len"] = len(ikeys[i])
- args2[u"remote_integ_key"] = ikeys[i]
- history = bool(not 1 < i < n_tunnels - 2)
- papi_exec.add(cmd1, history=history, **args1).\
- add(cmd2, history=history, **args2)
- replies = papi_exec.get_replies(err_msg)
- for reply in replies:
- if u"sw_if_index" in reply:
- ipsec_tunnels.append(reply[u"sw_if_index"])
- # Configure IP routes
- cmd1 = u"sw_interface_set_unnumbered"
- args1 = dict(
+ args[u"entry"][u"integrity_key"][u"length"] = len(ikeys[i])
+ args[u"entry"][u"integrity_key"][u"data"] = ikeys[i]
+ args[u"entry"][u"flags"] = int(
+ IPsecSadFlags.IPSEC_API_SAD_FLAG_NONE |
+ IPsecSadFlags.IPSEC_API_SAD_FLAG_IS_INBOUND
+ )
+ papi_exec.add(
+ cmd, history=bool(not 1 < i < n_tunnels - 2), **args
+ )
+ err_msg = f"Failed to add IPsec SAD entries on host" \
+ f" {nodes[u'DUT1'][u'host']}"
+ papi_exec.get_replies(err_msg)
+ # Add protection for tunnels with IPSEC
+ cmd = u"ipsec_tunnel_protect_update"
+ n_hop = dict(
+ address=0,
+ via_label=MPLS_LABEL_INVALID,
+ obj_id=Constants.BITWISE_NON_ZERO
+ )
+ ipsec_tunnel_protect = dict(
+ sw_if_index=None,
+ nh=n_hop,
+ sa_out=None,
+ n_sa_in=1,
+ sa_in=None
+ )
+ args = dict(
+ tunnel=ipsec_tunnel_protect
+ )
+ for i in range(existing_tunnels, n_tunnels):
+ args[u"tunnel"][u"sw_if_index"] = ipip_tunnels[i]
+ args[u"tunnel"][u"sa_out"] = i
+ args[u"tunnel"][u"sa_in"] = [100000 + i]
+ papi_exec.add(
+ cmd, history=bool(not 1 < i < n_tunnels - 2), **args
+ )
+ err_msg = f"Failed to add protection for tunnels with IPSEC " \
+ f"on host {nodes[u'DUT1'][u'host']}"
+ papi_exec.get_replies(err_msg)
+
+ # Configure unnumbered interfaces
+ cmd = u"sw_interface_set_unnumbered"
+ args = dict(
is_add=True,
sw_if_index=InterfaceUtil.get_interface_index(
nodes[u"DUT1"], if1_key
),
unnumbered_sw_if_index=0
)
- cmd2 = u"sw_interface_set_flags"
- args2 = dict(
+ for i in range(existing_tunnels, n_tunnels):
+ args[u"unnumbered_sw_if_index"] = ipip_tunnels[i]
+ papi_exec.add(
+ cmd, history=bool(not 1 < i < n_tunnels - 2), **args
+ )
+ # Set interfaces up
+ cmd = u"sw_interface_set_flags"
+ args = dict(
sw_if_index=0,
flags=InterfaceStatusFlags.IF_STATUS_API_FLAG_ADMIN_UP.value
)
- cmd3 = u"ip_route_add_del"
- args3 = dict(
+ for i in range(existing_tunnels, n_tunnels):
+ args[u"sw_if_index"] = ipip_tunnels[i]
+ papi_exec.add(
+ cmd, history=bool(not 1 < i < n_tunnels - 2), **args
+ )
+ # Configure IP routes
+ cmd = u"ip_route_add_del"
+ args = dict(
is_add=1,
is_multipath=0,
route=None
)
- err_msg = f"Failed to add IP routes " \
- f"on host {nodes[u'DUT1'][u'host']}"
for i in range(existing_tunnels, n_tunnels):
- args1[u"unnumbered_sw_if_index"] = ipsec_tunnels[i]
- args2[u"sw_if_index"] = ipsec_tunnels[i]
- args3[u"route"] = IPUtil.compose_vpp_route_structure(
+ args[u"route"] = IPUtil.compose_vpp_route_structure(
nodes[u"DUT1"], (raddr_ip2 + i).compressed,
prefix_len=128 if raddr_ip2.version == 6 else 32,
- interface=ipsec_tunnels[i]
+ interface=ipip_tunnels[i]
)
- history = bool(not 1 < i < n_tunnels - 2)
- papi_exec.add(cmd1, history=history, **args1).\
- add(cmd2, history=history, **args2).\
- add(cmd3, history=history, **args3)
+ papi_exec.add(
+ cmd, history=bool(not 1 < i < n_tunnels - 2), **args
+ )
+ err_msg = f"Failed to add IP routes on host " \
+ f"{nodes[u'DUT1'][u'host']}"
papi_exec.get_replies(err_msg)
+ return ckeys, ikeys
+
+ @staticmethod
+ def _ipsec_create_tunnel_interfaces_dut2_papi(
+ nodes, tun_ips, if2_key, n_tunnels, crypto_alg, ckeys, integ_alg,
+ ikeys, raddr_ip1, addr_incr, spi_d, existing_tunnels=0):
+ """Create multiple IPsec tunnel interfaces on DUT2 node using PAPI.
+
+ This method accesses keys generated by DUT1 method
+ and does not return anything.
+
+ :param nodes: VPP nodes to create tunnel interfaces.
+ :param tun_ips: Dictionary with VPP node 1 ipsec tunnel interface
+ IPv4/IPv6 address (ip1) and VPP node 2 ipsec tunnel interface
+ IPv4/IPv6 address (ip2).
+ :param if2_key: VPP node 2 / TG node (in case of 2-node topology)
+ interface key from topology file.
+ :param n_tunnels: Number of tunnel interfaces to be there at the end.
+ :param crypto_alg: The encryption algorithm name.
+ :param ckeys: List of encryption keys.
+ :param integ_alg: The integrity algorithm name.
+ :param ikeys: List of integrity keys.
+ :param spi_d: Dictionary with SPIs for VPP node 1 and VPP node 2.
+ :param addr_incr: IP / IPv6 address incremental step.
+ :param existing_tunnels: Number of tunnel interfaces before creation.
+ Useful mainly for reconf tests. Default 0.
+ :type nodes: dict
+ :type tun_ips: dict
+ :type if2_key: str
+ :type n_tunnels: int
+ :type crypto_alg: CryptoAlg
+ :type ckeys: Sequence[bytes]
+ :type integ_alg: Optional[IntegAlg]
+ :type ikeys: Sequence[bytes]
+ :type addr_incr: int
+ :type spi_d: dict
+ :type existing_tunnels: int
+ """
with PapiSocketExecutor(nodes[u"DUT2"]) as papi_exec:
if not existing_tunnels:
# Set IP address on VPP node 2 interface
- cmd1 = u"sw_interface_add_del_address"
- args1 = dict(
+ cmd = u"sw_interface_add_del_address"
+ args = dict(
sw_if_index=InterfaceUtil.get_interface_index(
nodes[u"DUT2"], if2_key
),
is_add=True,
del_all=False,
prefix=IPUtil.create_prefix_object(
- if2_ip, 96 if if2_ip.version == 6 else 24
+ tun_ips[u"ip2"], 96 if tun_ips[u"ip2"].version == 6
+ else 24
)
)
err_msg = f"Failed to set IP address on interface {if2_key} " \
f"on host {nodes[u'DUT2'][u'host']}"
- papi_exec.add(cmd1, **args1).get_reply(err_msg)
- # Configure IPsec tunnel interfaces
- cmd2 = u"ipsec_tunnel_if_add_del"
- args2 = dict(
- is_add=1,
- local_ip=IPUtil.create_ip_address_object(if2_ip),
- remote_ip=None,
- local_spi=0,
- remote_spi=0,
- crypto_alg=crypto_alg.alg_int_repr,
- local_crypto_key_len=0,
- local_crypto_key=None,
- remote_crypto_key_len=0,
- remote_crypto_key=None,
- integ_alg=integ_alg.alg_int_repr if integ_alg else 0,
- local_integ_key_len=0,
- local_integ_key=None,
- remote_integ_key_len=0,
- remote_integ_key=None,
- tx_table_id=0
+ papi_exec.add(cmd, **args).get_reply(err_msg)
+ # Configure IPIP tunnel interfaces
+ cmd = u"ipip_add_tunnel"
+ ipip_tunnel = dict(
+ instance=Constants.BITWISE_NON_ZERO,
+ src=None,
+ dst=None,
+ table_id=0,
+ flags=int(
+ TunnelEncpaDecapFlags.TUNNEL_API_ENCAP_DECAP_FLAG_NONE
+ ),
+ mode=int(TunnelMode.TUNNEL_API_MODE_P2P),
+ dscp=int(IpDscp.IP_API_DSCP_CS0)
+ )
+ args = dict(
+ tunnel=ipip_tunnel
+ )
+ ipip_tunnels = [None] * existing_tunnels
+ for i in range(existing_tunnels, n_tunnels):
+ args[u"tunnel"][u"src"] = IPAddress.create_ip_address_object(
+ tun_ips[u"ip2"]
+ )
+ args[u"tunnel"][u"dst"] = IPAddress.create_ip_address_object(
+ tun_ips[u"ip1"] + i * addr_incr
+ )
+ papi_exec.add(
+ cmd, history=bool(not 1 < i < n_tunnels - 2), **args
+ )
+ err_msg = f"Failed to add IPIP tunnel interfaces on host" \
+ f" {nodes[u'DUT2'][u'host']}"
+ ipip_tunnels.extend(
+ [
+ reply[u"sw_if_index"]
+ for reply in papi_exec.get_replies(err_msg)
+ if u"sw_if_index" in reply
+ ]
+ )
+ # Configure IPSec SAD entries
+ cmd = u"ipsec_sad_entry_add_del_v2"
+ c_key = dict(
+ length=0,
+ data=None
+ )
+ i_key = dict(
+ length=0,
+ data=None
+ )
+ sad_entry = dict(
+ sad_id=None,
+ spi=None,
+ protocol=int(IPsecProto.IPSEC_API_PROTO_ESP),
+
+ crypto_algorithm=crypto_alg.alg_int_repr,
+ crypto_key=c_key,
+ integrity_algorithm=integ_alg.alg_int_repr if integ_alg else 0,
+ integrity_key=i_key,
+
+ flags=None,
+ tunnel_src=0,
+ tunnel_dst=0,
+ tunnel_flags=int(
+ TunnelEncpaDecapFlags.TUNNEL_API_ENCAP_DECAP_FLAG_NONE
+ ),
+ dscp=int(IpDscp.IP_API_DSCP_CS0),
+ table_id=0,
+ salt=0,
+ udp_src_port=IPSEC_UDP_PORT_NONE,
+ udp_dst_port=IPSEC_UDP_PORT_NONE
+ )
+ args = dict(
+ is_add=True,
+ entry=sad_entry
)
- err_msg = f"Failed to add IPsec tunnel interfaces " \
- f"on host {nodes[u'DUT2'][u'host']}"
- ipsec_tunnels = [None] * existing_tunnels
for i in range(existing_tunnels, n_tunnels):
- args2[u"local_spi"] = spi_2 + i
- args2[u"remote_spi"] = spi_1 + i
- args2[u"local_ip"] = IPUtil.create_ip_address_object(if2_ip)
- args2[u"remote_ip"] = IPUtil.create_ip_address_object(
- if1_ip + i * addr_incr)
- args2[u"local_crypto_key_len"] = len(ckeys[i])
- args2[u"local_crypto_key"] = ckeys[i]
- args2[u"remote_crypto_key_len"] = len(ckeys[i])
- args2[u"remote_crypto_key"] = ckeys[i]
+ ckeys.append(
+ gen_key(IPsecUtil.get_crypto_alg_key_len(crypto_alg))
+ )
+ ikeys.append(
+ gen_key(IPsecUtil.get_integ_alg_key_len(integ_alg))
+ )
+ # SAD entry for outband / tx path
+ args[u"entry"][u"sad_id"] = 100000 + i
+ args[u"entry"][u"spi"] = spi_d[u"spi_2"] + i
+
+ args[u"entry"][u"crypto_key"][u"length"] = len(ckeys[i])
+ args[u"entry"][u"crypto_key"][u"data"] = ckeys[i]
if integ_alg:
- args2[u"local_integ_key_len"] = len(ikeys[i])
- args2[u"local_integ_key"] = ikeys[i]
- args2[u"remote_integ_key_len"] = len(ikeys[i])
- args2[u"remote_integ_key"] = ikeys[i]
- history = bool(not 1 < i < n_tunnels - 2)
- papi_exec.add(cmd2, history=history, **args2)
- replies = papi_exec.get_replies(err_msg)
- for reply in replies:
- if u"sw_if_index" in reply:
- ipsec_tunnels.append(reply[u"sw_if_index"])
+ args[u"entry"][u"integrity_key"][u"length"] = len(ikeys[i])
+ args[u"entry"][u"integrity_key"][u"data"] = ikeys[i]
+ args[u"entry"][u"flags"] = int(
+ IPsecSadFlags.IPSEC_API_SAD_FLAG_NONE
+ )
+ papi_exec.add(
+ cmd, history=bool(not 1 < i < n_tunnels - 2), **args
+ )
+ # SAD entry for inband / rx path
+ args[u"entry"][u"sad_id"] = i
+ args[u"entry"][u"spi"] = spi_d[u"spi_1"] + i
+
+ args[u"entry"][u"crypto_key"][u"length"] = len(ckeys[i])
+ args[u"entry"][u"crypto_key"][u"data"] = ckeys[i]
+ if integ_alg:
+ args[u"entry"][u"integrity_key"][u"length"] = len(ikeys[i])
+ args[u"entry"][u"integrity_key"][u"data"] = ikeys[i]
+ args[u"entry"][u"flags"] = int(
+ IPsecSadFlags.IPSEC_API_SAD_FLAG_NONE |
+ IPsecSadFlags.IPSEC_API_SAD_FLAG_IS_INBOUND
+ )
+ papi_exec.add(
+ cmd, history=bool(not 1 < i < n_tunnels - 2), **args
+ )
+ err_msg = f"Failed to add IPsec SAD entries on host" \
+ f" {nodes[u'DUT2'][u'host']}"
+ papi_exec.get_replies(err_msg)
+ # Add protection for tunnels with IPSEC
+ cmd = u"ipsec_tunnel_protect_update"
+ n_hop = dict(
+ address=0,
+ via_label=MPLS_LABEL_INVALID,
+ obj_id=Constants.BITWISE_NON_ZERO
+ )
+ ipsec_tunnel_protect = dict(
+ sw_if_index=None,
+ nh=n_hop,
+ sa_out=None,
+ n_sa_in=1,
+ sa_in=None
+ )
+ args = dict(
+ tunnel=ipsec_tunnel_protect
+ )
+ for i in range(existing_tunnels, n_tunnels):
+ args[u"tunnel"][u"sw_if_index"] = ipip_tunnels[i]
+ args[u"tunnel"][u"sa_out"] = 100000 + i
+ args[u"tunnel"][u"sa_in"] = [i]
+ papi_exec.add(
+ cmd, history=bool(not 1 < i < n_tunnels - 2), **args
+ )
+ err_msg = f"Failed to add protection for tunnels with IPSEC " \
+ f"on host {nodes[u'DUT2'][u'host']}"
+ papi_exec.get_replies(err_msg)
+
if not existing_tunnels:
- # Configure IP routes
- cmd1 = u"ip_route_add_del"
+ # Configure IP route
+ cmd = u"ip_route_add_del"
route = IPUtil.compose_vpp_route_structure(
- nodes[u"DUT2"], if1_ip.compressed,
- prefix_len=32 if if1_ip.version == 6 else 8,
+ nodes[u"DUT2"], tun_ips[u"ip1"].compressed,
+ prefix_len=32 if tun_ips[u"ip1"].version == 6 else 8,
interface=if2_key,
- gateway=(if2_ip - 1).compressed
+ gateway=(tun_ips[u"ip2"] - 1).compressed
)
- args1 = dict(
+ args = dict(
is_add=1,
is_multipath=0,
route=route
)
- papi_exec.add(cmd1, **args1)
- cmd1 = u"sw_interface_set_unnumbered"
- args1 = dict(
+ papi_exec.add(cmd, **args)
+ # Configure unnumbered interfaces
+ cmd = u"sw_interface_set_unnumbered"
+ args = dict(
is_add=True,
sw_if_index=InterfaceUtil.get_interface_index(
nodes[u"DUT2"], if2_key
),
unnumbered_sw_if_index=0
)
- cmd2 = u"sw_interface_set_flags"
- args2 = dict(
+ for i in range(existing_tunnels, n_tunnels):
+ args[u"unnumbered_sw_if_index"] = ipip_tunnels[i]
+ papi_exec.add(
+ cmd, history=bool(not 1 < i < n_tunnels - 2), **args
+ )
+ # Set interfaces up
+ cmd = u"sw_interface_set_flags"
+ args = dict(
sw_if_index=0,
flags=InterfaceStatusFlags.IF_STATUS_API_FLAG_ADMIN_UP.value
)
- cmd3 = u"ip_route_add_del"
- args3 = dict(
+ for i in range(existing_tunnels, n_tunnels):
+ args[u"sw_if_index"] = ipip_tunnels[i]
+ papi_exec.add(
+ cmd, history=bool(not 1 < i < n_tunnels - 2), **args
+ )
+ # Configure IP routes
+ cmd = u"ip_route_add_del"
+ args = dict(
is_add=1,
is_multipath=0,
route=None
)
- err_msg = f"Failed to add IP routes " \
- f"on host {nodes[u'DUT2'][u'host']}"
for i in range(existing_tunnels, n_tunnels):
- args1[u"unnumbered_sw_if_index"] = ipsec_tunnels[i]
- args2[u"sw_if_index"] = ipsec_tunnels[i]
- args3[u"route"] = IPUtil.compose_vpp_route_structure(
+ args[u"route"] = IPUtil.compose_vpp_route_structure(
nodes[u"DUT1"], (raddr_ip1 + i).compressed,
prefix_len=128 if raddr_ip1.version == 6 else 32,
- interface=ipsec_tunnels[i]
+ interface=ipip_tunnels[i]
)
- history = bool(not 1 < i < n_tunnels - 2)
- papi_exec.add(cmd1, history=history, **args1). \
- add(cmd2, history=history, **args2). \
- add(cmd3, history=history, **args3)
+ papi_exec.add(
+ cmd, history=bool(not 1 < i < n_tunnels - 2), **args
+ )
+ err_msg = f"Failed to add IP routes " \
+ f"on host {nodes[u'DUT2'][u'host']}"
papi_exec.get_replies(err_msg)
+ @staticmethod
+ def vpp_ipsec_create_tunnel_interfaces(
+ nodes, tun_if1_ip_addr, tun_if2_ip_addr, if1_key, if2_key,
+ n_tunnels, crypto_alg, integ_alg, raddr_ip1, raddr_ip2, raddr_range,
+ existing_tunnels=0, return_keys=False):
+ """Create multiple IPsec tunnel interfaces between two VPP nodes.
+
+ Some deployments (e.g. devicetest) need to know the generated keys.
+ But other deployments (e.g. scale perf test) would get spammed
+ if we returned keys every time.
+
+ :param nodes: VPP nodes to create tunnel interfaces.
+ :param tun_if1_ip_addr: VPP node 1 ipsec tunnel interface IPv4/IPv6
+ address.
+ :param tun_if2_ip_addr: VPP node 2 ipsec tunnel interface IPv4/IPv6
+ address.
+ :param if1_key: VPP node 1 interface key from topology file.
+ :param if2_key: VPP node 2 / TG node (in case of 2-node topology)
+ interface key from topology file.
+ :param n_tunnels: Number of tunnel interfaces to be there at the end.
+ :param crypto_alg: The encryption algorithm name.
+ :param integ_alg: The integrity algorithm name.
+ :param raddr_ip1: Policy selector remote IPv4/IPv6 start address for the
+ first tunnel in direction node1->node2.
+ :param raddr_ip2: Policy selector remote IPv4/IPv6 start address for the
+ first tunnel in direction node2->node1.
+ :param raddr_range: Mask specifying range of Policy selector Remote
+ IPv4/IPv6 addresses. Valid values are from 1 to 32 in case of IPv4
+ and to 128 in case of IPv6.
+ :param existing_tunnels: Number of tunnel interfaces before creation.
+ Useful mainly for reconf tests. Default 0.
+ :param return_keys: Whether generated keys should be returned.
+ :type nodes: dict
+ :type tun_if1_ip_addr: str
+ :type tun_if2_ip_addr: str
+ :type if1_key: str
+ :type if2_key: str
+ :type n_tunnels: int
+ :type crypto_alg: CryptoAlg
+ :type integ_alg: Optonal[IntegAlg]
+ :type raddr_ip1: string
+ :type raddr_ip2: string
+ :type raddr_range: int
+ :type existing_tunnels: int
+ :type return_keys: bool
+ :returns: Ckeys, ikeys, spi_1, spi_2.
+ :rtype: Optional[List[bytes], List[bytes], int, int]
+ """
+ n_tunnels = int(n_tunnels)
+ existing_tunnels = int(existing_tunnels)
+ spi_d = dict(
+ spi_1=100000,
+ spi_2=200000
+ )
+ tun_ips = dict(
+ ip1=ip_address(tun_if1_ip_addr),
+ ip2=ip_address(tun_if2_ip_addr)
+ )
+ raddr_ip1 = ip_address(raddr_ip1)
+ raddr_ip2 = ip_address(raddr_ip2)
+ addr_incr = 1 << (128 - raddr_range) if tun_ips[u"ip1"].version == 6 \
+ else 1 << (32 - raddr_range)
+
+ if n_tunnels - existing_tunnels > 10:
+ ckeys, ikeys = IPsecUtil._ipsec_create_tunnel_interfaces_dut1_vat(
+ nodes, tun_ips, if1_key, if2_key, n_tunnels, crypto_alg,
+ integ_alg, raddr_ip2, addr_incr, spi_d, existing_tunnels
+ )
+ if u"DUT2" in nodes.keys():
+ IPsecUtil._ipsec_create_tunnel_interfaces_dut2_vat(
+ nodes, tun_ips, if2_key, n_tunnels, crypto_alg, ckeys,
+ integ_alg, ikeys, raddr_ip1, addr_incr, spi_d,
+ existing_tunnels
+ )
+ else:
+ ckeys, ikeys = IPsecUtil._ipsec_create_tunnel_interfaces_dut1_papi(
+ nodes, tun_ips, if1_key, if2_key, n_tunnels, crypto_alg,
+ integ_alg, raddr_ip2, addr_incr, spi_d, existing_tunnels
+ )
+ if u"DUT2" in nodes.keys():
+ IPsecUtil._ipsec_create_tunnel_interfaces_dut2_papi(
+ nodes, tun_ips, if2_key, n_tunnels, crypto_alg, ckeys,
+ integ_alg, ikeys, raddr_ip1, addr_incr, spi_d,
+ existing_tunnels
+ )
+
+ if return_keys:
+ return ckeys, ikeys, spi_d[u"spi_1"], spi_d[u"spi_2"]
+ return None
+
@staticmethod
def _create_ipsec_script_files(dut, instances):
"""Create script files for configuring IPsec in containers
@staticmethod
def vpp_ipsec_create_tunnel_interfaces_in_containers(
- nodes, if1_ip_addr, if2_ip_addr, if1_key, if2_key, n_tunnels,
- crypto_alg, integ_alg, raddr_ip1, raddr_ip2, raddr_range,
- n_instances):
+ nodes, if1_ip_addr, if2_ip_addr, n_tunnels, crypto_alg, integ_alg,
+ raddr_ip1, raddr_ip2, raddr_range, n_instances):
"""Create multiple IPsec tunnel interfaces between two VPP nodes.
:param nodes: VPP nodes to create tunnel interfaces.
:param if1_ip_addr: VPP node 1 interface IP4 address.
:param if2_ip_addr: VPP node 2 interface IP4 address.
- :param if1_key: VPP node 1 interface key from topology file.
- :param if2_key: VPP node 2 interface key from topology file.
:param n_tunnels: Number of tunnell interfaces to create.
:param crypto_alg: The encryption algorithm name.
:param integ_alg: The integrity algorithm name.
:type nodes: dict
:type if1_ip_addr: str
:type if2_ip_addr: str
- :type if1_key: str
- :type if2_key: str
:type n_tunnels: int
:type crypto_alg: CryptoAlg
- :type integ_alg: IntegAlg
+ :type integ_alg: Optional[IntegAlg]
:type raddr_ip1: string
:type raddr_ip2: string
:type raddr_range: int
addr_incr = 1 << (32 - raddr_range)
dut1_scripts = IPsecUtil._create_ipsec_script_files(
- u"DUT1", n_instances)
+ u"DUT1", n_instances
+ )
dut2_scripts = IPsecUtil._create_ipsec_script_files(
- u"DUT2", n_instances)
+ u"DUT2", n_instances
+ )
for cnf in range(0, n_instances):
dut1_scripts[cnf].write(
)
for tnl in range(0, n_tunnels):
- tnl_incr = tnl * addr_incr
cnf = tnl % n_instances
- i = tnl // n_instances
- ckey = gen_key(IPsecUtil.get_crypto_alg_key_len(crypto_alg)).hex()
+ ckey = getattr(
+ gen_key(IPsecUtil.get_crypto_alg_key_len(crypto_alg)), u"hex"
+ )
integ = u""
+ ikey = getattr(
+ gen_key(IPsecUtil.get_integ_alg_key_len(integ_alg)), u"hex"
+ )
if integ_alg:
- ikey = gen_key(IPsecUtil.get_integ_alg_key_len(integ_alg)).hex()
integ = (
f"integ-alg {integ_alg.alg_name} "
f"local-integ-key {ikey} "
f"remote-integ-key {ikey} "
)
-
# Configure tunnel end point(s) on left side
dut1_scripts[cnf].write(
u"set interface ip address loop0 "
- f"{ip_address(if1_ip_addr) + tnl_incr}/32\n"
+ f"{ip_address(if1_ip_addr) + tnl * addr_incr}/32\n"
f"create ipsec tunnel "
- f"local-ip {ip_address(if1_ip_addr) + tnl_incr} "
+ f"local-ip {ip_address(if1_ip_addr) + tnl * addr_incr} "
f"local-spi {spi_1 + tnl} "
f"remote-ip {ip_address(if2_ip_addr) + cnf} "
f"remote-spi {spi_2 + tnl} "
f"crypto-alg {crypto_alg.alg_name} "
f"local-crypto-key {ckey} "
f"remote-crypto-key {ckey} "
- f"instance {i} "
+ f"instance {tnl // n_instances} "
f"salt 0x0 "
f"{integ} \n"
- f"set interface unnumbered ipip{i} use loop0\n"
- f"set interface state ipip{i} up\n"
- f"ip route add {ip_address(raddr_ip2)+tnl}/32 via ipip{i}\n\n"
+ f"set interface unnumbered ipip{tnl // n_instances} use loop0\n"
+ f"set interface state ipip{tnl // n_instances} up\n"
+ f"ip route add {ip_address(raddr_ip2)+tnl}/32 "
+ f"via ipip{tnl // n_instances}\n\n"
)
-
# Configure tunnel end point(s) on right side
dut2_scripts[cnf].write(
f"set ip neighbor memif1/{cnf + 1} "
- f"{ip_address(if1_ip_addr) + tnl_incr} "
+ f"{ip_address(if1_ip_addr) + tnl * addr_incr} "
f"02:02:00:00:{17:02X}:{cnf:02X} static\n"
f"create ipsec tunnel local-ip {ip_address(if2_ip_addr) + cnf} "
f"local-spi {spi_2 + tnl} "
- f"remote-ip {ip_address(if1_ip_addr) + tnl_incr} "
+ f"remote-ip {ip_address(if1_ip_addr) + tnl * addr_incr} "
f"remote-spi {spi_1 + tnl} "
f"crypto-alg {crypto_alg.alg_name} "
f"local-crypto-key {ckey} "
f"remote-crypto-key {ckey} "
- f"instance {i} "
+ f"instance {tnl // n_instances} "
f"salt 0x0 "
f"{integ}\n"
- f"set interface unnumbered ipip{i} use memif1/{cnf + 1}\n"
- f"set interface state ipip{i} up\n"
- f"ip route add {ip_address(raddr_ip1) + tnl}/32 via ipip{i}\n\n"
+ f"set interface unnumbered ipip{tnl // n_instances} "
+ f"use memif1/{cnf + 1}\n"
+ f"set interface state ipip{tnl // n_instances} up\n"
+ f"ip route add {ip_address(raddr_ip1) + tnl}/32 "
+ f"via ipip{tnl // n_instances}\n\n"
)
IPsecUtil._close_and_copy_ipsec_script_files(
:type interface2: str or int
:type n_tunnels: int
:type crypto_alg: CryptoAlg
- :type integ_alg: IntegAlg
+ :type integ_alg: Optional[IntegAlg]
:type tunnel_ip1: str
:type tunnel_ip2: str
:type raddr_ip1: string
:type node: dict
"""
PapiSocketExecutor.run_cli_cmd(node, u"show ipsec")
+
+ @staticmethod
+ def show_ipsec_security_association(node):
+ """Show IPSec security association.
+
+ :param node: DUT node.
+ :type node: dict
+ """
+ cmds = [
+ u"ipsec_sa_v2_dump"
+ ]
+ PapiSocketExecutor.dump_and_log(node, cmds)
Code Review / csit.git / blobdiff