- @staticmethod
- def vpp_create_multiple_vxlan_ipv4_tunnels(
- node, node_vxlan_if, node_vlan_if, op_node, op_node_if,
- n_tunnels, vni_start, src_ip_start, dst_ip_start, ip_step, ip_limit,
- bd_id_start):
- """Create multiple VXLAN tunnel interfaces and VLAN sub-interfaces on
- VPP node.
-
- Put each pair of VXLAN tunnel interface and VLAN sub-interface to
- separate bridge-domain.
-
- :param node: VPP node to create VXLAN tunnel interfaces.
- :param node_vxlan_if: VPP node interface key to create VXLAN tunnel
- interfaces.
- :param node_vlan_if: VPP node interface key to create VLAN
- sub-interface.
- :param op_node: Opposite VPP node for VXLAN tunnel interfaces.
- :param op_node_if: Opposite VPP node interface key for VXLAN tunnel
- interfaces.
- :param n_tunnels: Number of tunnel interfaces to create.
- :param vni_start: VNI start ID.
- :param src_ip_start: VXLAN tunnel source IP address start.
- :param dst_ip_start: VXLAN tunnel destination IP address start.
- :param ip_step: IP address incremental step.
- :param ip_limit: IP address limit.
- :param bd_id_start: Bridge-domain ID start.
- :type node: dict
- :type node_vxlan_if: str
- :type node_vlan_if: str
- :type op_node: dict
- :type op_node_if: str
- :type n_tunnels: int
- :type vni_start: int
- :type src_ip_start: str
- :type dst_ip_start: str
- :type ip_step: int
- :type ip_limit: str
- :type bd_id_start: int
- """
- # configure IPs, create VXLAN interfaces and VLAN sub-interfaces
- vxlan_count = InterfaceUtil.vpp_create_vxlan_and_vlan_interfaces(
- node, node_vxlan_if, node_vlan_if, n_tunnels, vni_start,
- src_ip_start, dst_ip_start, ip_step, ip_limit)
-
- # update topology with VXLAN interfaces and VLAN sub-interfaces data
- # and put interfaces up
- InterfaceUtil.vpp_put_vxlan_and_vlan_interfaces_up(
- node, vxlan_count, node_vlan_if)
-
- # configure bridge domains, ARPs and routes
- InterfaceUtil.vpp_put_vxlan_and_vlan_interfaces_to_bridge_domain(
- node, node_vxlan_if, vxlan_count, op_node, op_node_if, dst_ip_start,
- ip_step, bd_id_start)
-
- @staticmethod
- def vpp_create_vxlan_and_vlan_interfaces(
- node, node_vxlan_if, node_vlan_if, vxlan_count, vni_start,
- src_ip_start, dst_ip_start, ip_step, ip_limit):
- """
- Configure IPs, create VXLAN interfaces and VLAN sub-interfaces on VPP
- node.
-
- :param node: VPP node.
- :param node_vxlan_if: VPP node interface key to create VXLAN tunnel
- interfaces.
- :param node_vlan_if: VPP node interface key to create VLAN
- sub-interface.
- :param vxlan_count: Number of tunnel interfaces to create.
- :param vni_start: VNI start ID.
- :param src_ip_start: VXLAN tunnel source IP address start.
- :param dst_ip_start: VXLAN tunnel destination IP address start.
- :param ip_step: IP address incremental step.
- :param ip_limit: IP address limit.
- :type node: dict
- :type node_vxlan_if: str
- :type node_vlan_if: str
- :type vxlan_count: int
- :type vni_start: int
- :type src_ip_start: str
- :type dst_ip_start: str
- :type ip_step: int
- :type ip_limit: str
- :returns: Number of created VXLAN interfaces.
- :rtype: int
- """
-
- try:
- src_address_start = IPv6Address(unicode(src_ip_start))
- dst_address_start = IPv6Address(unicode(dst_ip_start))
- ip_address_limit = IPv6Address(unicode(ip_limit))
- af_inet = AF_INET6
- is_ipv6 = 1
- except (AddressValueError, NetmaskValueError):
- src_address_start = IPv4Address(unicode(src_ip_start))
- dst_address_start = IPv4Address(unicode(dst_ip_start))
- ip_address_limit = IPv4Address(unicode(ip_limit))
- af_inet = AF_INET
- is_ipv6 = 0
-
- with PapiExecutor(node) as papi_exec:
- for i in xrange(0, vxlan_count):
- src_ip = src_address_start + i * ip_step
- dst_ip = dst_address_start + i * ip_step
- if src_ip > ip_address_limit or dst_ip > ip_address_limit:
- logger.warn("Can't do more iterations - IP address limit "
- "has been reached.")
- vxlan_count = i
- break
- cmd = 'sw_interface_add_del_address'
- args = dict(
- sw_if_index=InterfaceUtil.get_interface_index(
- node, node_vxlan_if),
- is_add=1,
- is_ipv6=0,
- del_all=0,
- address_length=128 if is_ipv6 else 32,
- address=inet_pton(af_inet, str(src_ip)))
- papi_exec.add(cmd, **args)
- cmd = 'vxlan_add_del_tunnel'
- args = dict(
- is_add=1,
- is_ipv6=0,
- instance=Constants.BITWISE_NON_ZERO,
- src_address=inet_pton(af_inet, str(src_ip)),
- dst_address=inet_pton(af_inet, str(dst_ip)),
- mcast_sw_if_index=Constants.BITWISE_NON_ZERO,
- encap_vrf_id=0,
- decap_next_index=Constants.BITWISE_NON_ZERO,
- vni=int(vni_start)+i)
- papi_exec.add(cmd, **args)
- cmd = 'create_vlan_subif'
- args = dict(
- sw_if_index=InterfaceUtil.get_interface_index(
- node, node_vlan_if),
- vlan_id=i+1)
- papi_exec.add(cmd, **args)
- papi_exec.get_replies().verify_replies()
-
- return vxlan_count
-
- @staticmethod
- def vpp_put_vxlan_and_vlan_interfaces_up(node, vxlan_count, node_vlan_if):
- """
- Update topology with VXLAN interfaces and VLAN sub-interfaces data
- and put interfaces up.
-
- :param node: VPP node.
- :param vxlan_count: Number of tunnel interfaces.
- :param node_vlan_if: VPP node interface key where VLAN sub-interfaces
- have been created.
- :type node: dict
- :type vxlan_count: int
- :type node_vlan_if: str
- """
-
- if_data = InterfaceUtil.vpp_get_interface_data(node)
-
- with PapiExecutor(node) as papi_exec:
- for i in xrange(0, vxlan_count):
- vxlan_subif_key = Topology.add_new_port(node, 'vxlan_tunnel')
- vxlan_subif_name = 'vxlan_tunnel{nr}'.format(nr=i)
- vxlan_found = False
- vxlan_subif_idx = None
- vlan_subif_key = Topology.add_new_port(node, 'vlan_subif')
- vlan_subif_name = '{if_name}.{vlan}'.format(
- if_name=Topology.get_interface_name(
- node, node_vlan_if), vlan=i+1)
- vlan_found = False
- vlan_idx = None
- for data in if_data:
- if not vxlan_found \
- and data['interface_name'] == vxlan_subif_name:
- vxlan_subif_idx = data['sw_if_index']
- vxlan_found = True
- elif not vlan_found \
- and data['interface_name'] == vlan_subif_name:
- vlan_idx = data['sw_if_index']
- vlan_found = True
- if vxlan_found and vlan_found:
- break
- Topology.update_interface_sw_if_index(
- node, vxlan_subif_key, vxlan_subif_idx)
- Topology.update_interface_name(
- node, vxlan_subif_key, vxlan_subif_name)
- cmd = 'sw_interface_set_flags'
- args1 = dict(sw_if_index=vxlan_subif_idx,
- admin_up_down=1)
- Topology.update_interface_sw_if_index(
- node, vlan_subif_key, vlan_idx)
- Topology.update_interface_name(
- node, vlan_subif_key, vlan_subif_name)
- args2 = dict(sw_if_index=vlan_idx,
- admin_up_down=1)
- papi_exec.add(cmd, **args1).add(cmd, **args2)
- papi_exec.get_replies().verify_replies()
-
- @staticmethod
- def vpp_put_vxlan_and_vlan_interfaces_to_bridge_domain(
- node, node_vxlan_if, vxlan_count, op_node, op_node_if, dst_ip_start,
- ip_step, bd_id_start):
- """
- Configure ARPs and routes for VXLAN interfaces and put each pair of
- VXLAN tunnel interface and VLAN sub-interface to separate bridge-domain.
-
- :param node: VPP node.
- :param node_vxlan_if: VPP node interface key where VXLAN tunnel
- interfaces have been created.
- :param vxlan_count: Number of tunnel interfaces.
- :param op_node: Opposite VPP node for VXLAN tunnel interfaces.
- :param op_node_if: Opposite VPP node interface key for VXLAN tunnel
- interfaces.
- :param dst_ip_start: VXLAN tunnel destination IP address start.
- :param ip_step: IP address incremental step.
- :param bd_id_start: Bridge-domain ID start.
- :type node: dict
- :type node_vxlan_if: str
- :type vxlan_count: int
- :type op_node: dict
- :type op_node_if:
- :type dst_ip_start: str
- :type ip_step: int
- :type bd_id_start: int
- """
-
- try:
- dst_address_start = IPv6Address(unicode(dst_ip_start))
- af_inet = AF_INET6
- is_ipv6 = 1
- except (AddressValueError, NetmaskValueError):
- dst_address_start = IPv4Address(unicode(dst_ip_start))
- af_inet = AF_INET
- is_ipv6 = 0
-
- with PapiExecutor(node) as papi_exec:
- for i in xrange(0, vxlan_count):
- dst_ip = dst_address_start + i * ip_step
- neighbor = dict(
- sw_if_index=Topology.get_interface_sw_index(
- node, node_vxlan_if),
- flags=0,
- mac_address=str(
- Topology.get_interface_mac(op_node, op_node_if)),
- ip_address=str(dst_ip))
- cmd = 'ip_neighbor_add_del'
- args = dict(
- is_add=1,
- neighbor=neighbor)
- papi_exec.add(cmd, **args)
- cmd = 'ip_add_del_route'
- args = dict(
- next_hop_sw_if_index=Topology.get_interface_sw_index(
- node, node_vxlan_if),
- table_id=0,
- is_add=1,
- is_ipv6=is_ipv6,
- next_hop_weight=1,
- next_hop_proto=1 if is_ipv6 else 0,
- dst_address_length=128 if is_ipv6 else 32,
- dst_address=inet_pton(af_inet, str(dst_ip)),
- next_hop_address=inet_pton(af_inet, str(dst_ip)))
- papi_exec.add(cmd, **args)
- cmd = 'sw_interface_set_l2_bridge'
- args = dict(
- rx_sw_if_index=Topology.get_interface_sw_index(
- node, 'vxlan_tunnel{nr}'.format(nr=i+1)),
- bd_id=int(bd_id_start+i),
- shg=0,
- port_type=0,
- enable=1)
- papi_exec.add(cmd, **args)
- args = dict(
- rx_sw_if_index=Topology.get_interface_sw_index(
- node, 'vlan_subif{nr}'.format(nr=i+1)),
- bd_id=int(bd_id_start+i),
- shg=0,
- port_type=0,
- enable=1)
- papi_exec.add(cmd, **args)
- papi_exec.get_replies().verify_replies()
-
Code Review / csit.git / blobdiff