Remove everything related to TLDK

[csit.git] / resources / libraries / python / TLDK / UdpTest.py

diff --git a/resources/libraries/python/TLDK/UdpTest.py b/resources/libraries/python/TLDK/UdpTest.py
deleted file mode 100644 (file)
index 8973fe4..0000000
--- a/resources/libraries/python/TLDK/UdpTest.py
+++ /dev/null
@@ -1,125 +0,0 @@
-# Copyright (c) 2017 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-"""
-This module exists to provide the UDP test for TLDK on topology nodes.
-"""
-
-from scapy.utils import rdpcap
-from scapy.layers.inet import IP
-from scapy.layers.inet6 import IPv6
-
-from robot.libraries.BuiltIn import BuiltIn
-
-from resources.libraries.python.ssh import SSH
-from resources.libraries.python.TLDK.TLDKConstants import TLDKConstants as con
-from resources.libraries.python.topology import Topology
-
-class UdpTest:
-    """Test the TLDK UDP function."""
-
-    @staticmethod
-    def get_pcap_info(file_prefix):
-        """Get the Dest IP from the RX pcap file
-
-        :param file_prefix: the test case pcap file prefix
-        :type file_prefix: str
-        :returns: packet counts, dest ip, is or not ipv4
-        :rtype: tuple(int, str, bool).
-        """
-        exec_dir = BuiltIn().get_variable_value("${EXECDIR}")
-
-        rx_pcapfile = '{0}/{1}/{2}_rx.pcap' \
-            .format(exec_dir, con.TLDK_TESTCONFIG, file_prefix)
-        packets = rdpcap(rx_pcapfile)
-        count = len(packets)
-
-        ### the first packet
-        pkt = packets[0]
-        if pkt.type == 0x0800:
-            ### this is a IPv4 packet
-            dest_ip = pkt[IP].dst
-            is_ipv4 = True
-        elif pkt.type == 0x86dd:
-            ### this is a IPv6 packet
-            dest_ip = pkt[IPv6].dst
-            is_ipv4 = False
-
-        return count, dest_ip, is_ipv4
-
-    @staticmethod
-    def exec_the_udpfwd_test(dut_node, dut_if, file_prefix, \
-            dest_ip, is_ipv4=True):
-        """Execute the udpfwd on the dut_node.
-
-        :param dut_node: Will execute the udpfwd on this node.
-        :param dut_if: DUT interface name.
-        :param file_prefix: The test case config file prefix.
-        :param dest_ip: The UDP packet dest IP.
-        :param is_ipv4: Execute the IPv4 or IPv6 test.
-        :type dut_node: dict
-        :type dut_if: str
-        :type file_prefix: str
-        :type dest_ip: str
-        :type is_ipv4: bool
-        :raises RuntimeError: If failed to execute udpfwd test on the dut node.
-        """
-        pci_address = Topology.get_interface_pci_addr(dut_node, dut_if)
-        ssh = SSH()
-        ssh.connect(dut_node)
-        if is_ipv4:
-            cmd = 'cd {0}/{4} && ./run_tldk.sh {0}/{5}/{2}_rx.pcap ' \
-                '{0}/{5}/{2}_tx.pcap {1} {0}/{5}/{2}_fe.cfg ' \
-                '{0}/{5}/{2}_be.cfg {3} NONE' \
-                .format(con.REMOTE_FW_DIR, pci_address, file_prefix, \
-                dest_ip, con.TLDK_SCRIPTS, con.TLDK_TESTCONFIG)
-        else:
-            cmd = 'cd {0}/{4} && ./run_tldk.sh {0}/{5}/{2}_rx.pcap ' \
-                '{0}/{5}/{2}_tx.pcap {1} {0}/{5}/{2}_fe.cfg ' \
-                '{0}/{5}/{2}_be.cfg NONE {3}' \
-                .format(con.REMOTE_FW_DIR, pci_address, file_prefix, \
-                dest_ip, con.TLDK_SCRIPTS, con.TLDK_TESTCONFIG)
-
-        (ret_code, _, _) = ssh.exec_command(cmd, timeout=600)
-        if ret_code != 0:
-            raise RuntimeError('Failed to execute udpfwd test at node {0}'
-                               .format(dut_node['host']))
-
-    @staticmethod
-    def get_the_test_result(dut_node, file_prefix):
-        """
-        After execute the udpfwd cmd, use this to get the test result.
-
-        :param dut_node: will get the test result in this dut node
-        :param dut_if: the dut interface name
-        :param file_prefix: the test case output file prefix
-        :type dut_node: dice
-        :type dut_if: str
-        :type file_prefix: str
-        :returns: str.
-        :rtype: str
-        :raises RuntimeError: If failed to get the test result.
-        """
-        ssh = SSH()
-        ssh.connect(dut_node)
-        cmd = 'cd {0}; sudo /usr/sbin/tcpdump -nnnn -vvv -r ./{2}/{1}_tx.pcap' \
-              ' | grep \'udp sum ok\' | wc -l' \
-            .format(con.REMOTE_FW_DIR, file_prefix, con.TLDK_TESTCONFIG)
-
-        (ret_code, stdout, _) = ssh.exec_command(cmd, timeout=100)
-        if ret_code != 0:
-            raise RuntimeError('Failed to get test result at node {0}'
-                               .format(dut_node['host']))
-
-        return stdout