super(TGDropRateSearchImpl, self).__init__()
def measure_loss(self, rate, frame_size, loss_acceptance,
- loss_acceptance_type, traffic_type, skip_warmup=False):
+ loss_acceptance_type, traffic_profile, skip_warmup=False):
"""Runs the traffic and evaluate the measured results.
:param rate: Offered traffic load.
:param frame_size: Size of frame.
:param loss_acceptance: Permitted drop ratio or frames count.
:param loss_acceptance_type: Type of permitted loss.
- :param traffic_type: Module name as a traffic type identifier.
+ :param traffic_profile: Module name as a traffic profile identifier.
See resources/traffic_profiles/trex for implemented modules.
:param skip_warmup: Start TRex without warmup traffic if true.
:type rate: float
:type frame_size: str
:type loss_acceptance: float
:type loss_acceptance_type: LossAcceptanceType
- :type traffic_type: str
+ :type traffic_profile: str
:type skip_warmup: bool
:returns: Drop threshold exceeded? (True/False)
:rtype: bool
if skip_warmup:
tg_instance.trex_stl_start_remote_exec(self.get_duration(),
unit_rate, frame_size,
- traffic_type,
+ traffic_profile,
warmup_time=0.0)
else:
tg_instance.trex_stl_start_remote_exec(self.get_duration(),
unit_rate, frame_size,
- traffic_type)
+ traffic_profile)
loss = tg_instance.get_loss()
sent = tg_instance.get_sent()
if self.loss_acceptance_type_is_percentage():
self._ifaces_reordered = False
# Parameters not given by measure().
self.frame_size = None
- self.traffic_type = None
+ self.traffic_profile = None
self.warmup_time = None
@property
def initialize_traffic_generator(
self, tg_node, tg_if1, tg_if2, tg_if1_adj_node, tg_if1_adj_if,
- tg_if2_adj_node, tg_if2_adj_if, test_type, tg_if1_dst_mac=None,
+ tg_if2_adj_node, tg_if2_adj_if, osi_layer, tg_if1_dst_mac=None,
tg_if2_dst_mac=None):
"""TG initialization.
:param tg_if1_adj_if: TG if1 adjecent interface.
:param tg_if2_adj_node: TG if2 adjecent node.
:param tg_if2_adj_if: TG if2 adjecent interface.
- :param test_type: 'L2', 'L3' or 'L7' - OSI Layer testing type.
+ :param osi_layer: 'L2', 'L3' or 'L7' - OSI Layer testing type.
:param tg_if1_dst_mac: Interface 1 destination MAC address.
:param tg_if2_dst_mac: Interface 2 destination MAC address.
:type tg_node: dict
:type tg_if1_adj_if: str
:type tg_if2_adj_node: dict
:type tg_if2_adj_if: str
- :type test_type: str
+ :type osi_layer: str
:type tg_if1_dst_mac: str
:type tg_if2_dst_mac: str
:returns: nothing
if1_addr = Topology().get_interface_mac(tg_node, tg_if1)
if2_addr = Topology().get_interface_mac(tg_node, tg_if2)
- if test_type == 'L2':
+ if osi_layer == 'L2':
if1_adj_addr = if2_addr
if2_adj_addr = if1_addr
- elif test_type == 'L3':
+ elif osi_layer == 'L3':
if1_adj_addr = Topology().get_interface_mac(tg_if1_adj_node,
tg_if1_adj_if)
if2_adj_addr = Topology().get_interface_mac(tg_if2_adj_node,
tg_if2_adj_if)
- elif test_type == 'L7':
+ elif osi_layer == 'L7':
if1_addr = Topology().get_interface_ip4(tg_node, tg_if1)
if2_addr = Topology().get_interface_ip4(tg_node, tg_if2)
if1_adj_addr = Topology().get_interface_ip4(tg_if1_adj_node,
if1_adj_addr, if2_adj_addr = if2_adj_addr, if1_adj_addr
self._ifaces_reordered = True
- if test_type == 'L2' or test_type == 'L3':
+ if osi_layer == 'L2' or osi_layer == 'L3':
(ret, _, _) = ssh.exec_command(
"sudo sh -c 'cat << EOF > /etc/trex_cfg.yaml\n"
"- port_limit: 2\n"
"0x"+if1_addr.replace(":", ",0x"),
"0x"+if2_adj_addr.replace(":", ",0x"),
"0x"+if2_addr.replace(":", ",0x")))
- elif test_type == 'L7':
+ elif osi_layer == 'L7':
(ret, _, _) = ssh.exec_command(
"sudo sh -c 'cat << EOF > /etc/trex_cfg.yaml\n"
"- port_limit: 2\n"
raise RuntimeError('trex-cfg failed')
# start TRex
- if test_type == 'L2' or test_type == 'L3':
+ if osi_layer == 'L2' or osi_layer == 'L3':
(ret, _, _) = ssh.exec_command(
"sh -c 'cd {0}/scripts/ && "
"sudo nohup ./t-rex-64 -i -c 7 --iom 0 > /tmp/trex.log "
"2>&1 &' > /dev/null"\
.format(Constants.TREX_INSTALL_DIR))
- elif test_type == 'L7':
+ elif osi_layer == 'L7':
(ret, _, _) = ssh.exec_command(
"sh -c 'cd {0}/scripts/ && "
"sudo nohup ./t-rex-64 --astf -i -c 7 --iom 0 > "
raise RuntimeError('TRex stateless runtime error')
def trex_stl_start_remote_exec(
- self, duration, rate, framesize, traffic_type, async_call=False,
+ self, duration, rate, frame_size, traffic_profile, async_call=False,
latency=True, warmup_time=5.0, unidirection=False, tx_port=0,
rx_port=1):
"""Execute script on remote node over ssh to start traffic.
:param duration: Time expresed in seconds for how long to send traffic.
:param rate: Traffic rate expressed with units (pps, %)
- :param framesize: L2 frame size to send (without padding and IPG).
- :param traffic_type: Module name as a traffic type identifier.
+ :param frame_size: L2 frame size to send (without padding and IPG).
+ :param traffic_profile: Module name as a traffic profile identifier.
See resources/traffic_profiles/trex for implemented modules.
:param async_call: If enabled then don't wait for all incomming trafic.
:param latency: With latency measurement.
Default: 1
:type duration: float
:type rate: str
- :type framesize: str
- :type traffic_type: str
+ :type frame_size: str
+ :type traffic_profile: str
:type async_call: bool
:type latency: bool
:type warmup_time: float
ssh.connect(self._node)
reorder = self._ifaces_reordered # Just to make the next line fit.
p_0, p_1 = (rx_port, tx_port) if reorder else (tx_port, rx_port)
+ # Values from Robot can introduce type unicode,
+ # we need to encode them, so that repr() does not lead with 'u'.
+ if isinstance(rate, unicode):
+ rate = rate.encode("utf-8")
+ if isinstance(duration, unicode):
+ duration = duration.encode("utf-8")
+ if isinstance(warmup_time, unicode):
+ warmup_time = warmup_time.encode("utf-8")
command = (
"sh -c '{tool}/resources/tools/trex/trex_stateless_profile.py"
" --profile {prof}/resources/traffic_profiles/trex/{traffic}.py"
- " --duration {duration} --frame_size {framesize} --rate {rate}"
- " --warmup_time {warmup} --port_0 {p_0} --port_1 {p_1}").format(
+ " --duration {duration!r} --frame_size {frame_size} --rate {rate!r}"
+ " --warmup_time {warmup!r} --port_0 {p_0} --port_1 {p_1}").format(
tool=Constants.REMOTE_FW_DIR, prof=Constants.REMOTE_FW_DIR,
- traffic=traffic_type, duration=duration, framesize=framesize,
- rate=rate, warmup=warmup_time, p_0=p_0, p_1=p_1)
+ traffic=traffic_profile, duration=duration,
+ frame_size=frame_size, rate=rate, warmup=warmup_time, p_0=p_0,
+ p_1=p_1)
if async_call:
command += " --async"
if latency:
self.trex_stl_stop_remote_exec(self._node)
def send_traffic_on_tg(
- self, duration, rate, framesize, traffic_type, warmup_time=5,
+ self, duration, rate, frame_size, traffic_profile, warmup_time=5,
async_call=False, latency=True, unidirection=False, tx_port=0,
rx_port=1):
"""Send traffic from all configured interfaces on TG.
TODO: Is it better to have less descriptive argument names
just to make them less probable to be viewed as misleading or confusing?
- See https://gerrit.fd.io/r/#/c/17625/11/resources/libraries/python/TrafficGenerator.py@406
+ See https://gerrit.fd.io/r/#/c/17625/11/resources/libraries/python\
+ /TrafficGenerator.py@406
:param duration: Duration of test traffic generation in seconds.
:param rate: Offered load per interface (e.g. 1%, 3gbps, 4mpps, ...).
- :param framesize: Frame size (L2) in Bytes.
- :param traffic_type: Module name as a traffic type identifier.
+ :param frame_size: Frame size (L2) in Bytes.
+ :param traffic_profile: Module name as a traffic profile identifier.
See resources/traffic_profiles/trex for implemented modules.
:param warmup_time: Warmup phase in seconds.
:param async_call: Async mode.
Default: 1
:type duration: str
:type rate: str
- :type framesize: str
- :type traffic_type: str
+ :type frame_size: str
+ :type traffic_profile: str
:type warmup_time: float
:type async_call: bool
:type latency: bool
raise RuntimeError('TG subtype not defined')
elif node['subtype'] == NodeSubTypeTG.TREX:
self.trex_stl_start_remote_exec(
- duration, rate, framesize, traffic_type, async_call, latency,
- warmup_time, unidirection, tx_port, rx_port)
+ duration, rate, frame_size, traffic_profile, async_call,
+ latency, warmup_time, unidirection, tx_port, rx_port)
else:
raise NotImplementedError("TG subtype not supported")
raise Exception("Traffic loss {} above loss acceptance: {}".format(
loss, loss_acceptance))
- def set_rate_provider_defaults(self, frame_size, traffic_type,
+ def set_rate_provider_defaults(self, frame_size, traffic_profile,
warmup_time=0.0):
"""Store values accessed by measure().
:param frame_size: Frame size identifier or value [B].
- :param traffic_type: Module name as a traffic type identifier.
+ :param traffic_profile: Module name as a traffic profile identifier.
See resources/traffic_profiles/trex for implemented modules.
:param warmup_time: Traffic duration before measurement starts [s].
:type frame_size: str or int
- :type traffic_type: str
+ :type traffic_profile: str
:type warmup_time: float
"""
self.frame_size = frame_size
- self.traffic_type = str(traffic_type)
+ self.traffic_profile = str(traffic_profile)
self.warmup_time = float(warmup_time)
def measure(self, duration, transmit_rate):
# Trex needs target Tr per stream, but reports aggregate Tx and Dx.
unit_rate = str(transmit_rate / 2.0) + "pps"
self.send_traffic_on_tg(
- duration, unit_rate, self.frame_size, self.traffic_type,
+ duration, unit_rate, self.frame_size, self.traffic_profile,
warmup_time=self.warmup_time, latency=True)
transmit_count = int(self.get_sent())
loss_count = int(self.get_loss())
@staticmethod
def perform_optimized_ndrpdr_search(
- frame_size, traffic_type, minimum_transmit_rate,
+ frame_size, traffic_profile, minimum_transmit_rate,
maximum_transmit_rate, packet_loss_ratio=0.005,
final_relative_width=0.005, final_trial_duration=30.0,
initial_trial_duration=1.0, number_of_intermediate_phases=2,
"""Setup initialized TG, perform optimized search, return intervals.
:param frame_size: Frame size identifier or value [B].
- :param traffic_type: Module name as a traffic type identifier.
+ :param traffic_profile: Module name as a traffic profile identifier.
See resources/traffic_profiles/trex for implemented modules.
:param minimum_transmit_rate: Minimal bidirectional
target transmit rate [pps].
Default 1 is suitable for fairly stable tests,
less stable tests might get better overal duration with 2 or more.
:type frame_size: str or int
- :type traffic_type: str
+ :type traffic_profile: str
:type minimum_transmit_rate: float
:type maximum_transmit_rate: float
:type packet_loss_ratio: float
# to be able to use trex_stl-*()
tg_instance = BuiltIn().get_library_instance(
'resources.libraries.python.TrafficGenerator')
- tg_instance.set_rate_provider_defaults(frame_size, traffic_type)
+ tg_instance.set_rate_provider_defaults(frame_size, traffic_profile)
algorithm = MultipleLossRatioSearch(
measurer=tg_instance, final_trial_duration=final_trial_duration,
final_relative_width=final_relative_width,
@staticmethod
def perform_soak_search(
- frame_size, traffic_type, minimum_transmit_rate,
- maximum_transmit_rate, plr_target=1e-7, tdpt=0.2,
- initial_count=50, timeout=1800.0):
+ frame_size, traffic_profile, minimum_transmit_rate,
+ maximum_transmit_rate, plr_target=1e-7, tdpt=0.1,
+ initial_count=50, timeout=1800.0, trace_enabled=False):
"""Setup initialized TG, perform soak search, return avg and stdev.
:param frame_size: Frame size identifier or value [B].
- :param traffic_type: Module name as a traffic type identifier.
+ :param traffic_profile: Module name as a traffic profile identifier.
See resources/traffic_profiles/trex for implemented modules.
:param minimum_transmit_rate: Minimal bidirectional
target transmit rate [pps].
takes significant time even without any trial results.
:param timeout: The search will stop after this overall time [s].
:type frame_size: str or int
- :type traffic_type: str
+ :type traffic_profile: str
:type minimum_transmit_rate: float
:type maximum_transmit_rate: float
:type plr_target: float
"""
tg_instance = BuiltIn().get_library_instance(
'resources.libraries.python.TrafficGenerator')
- tg_instance.set_rate_provider_defaults(frame_size, traffic_type)
+ tg_instance.set_rate_provider_defaults(frame_size, traffic_profile)
algorithm = PLRsearch(
measurer=tg_instance, trial_duration_per_trial=tdpt,
packet_loss_ratio_target=plr_target,
- trial_number_offset=initial_count, timeout=timeout)
+ trial_number_offset=initial_count, timeout=timeout,
+ trace_enabled=trace_enabled)
result = algorithm.search(minimum_transmit_rate, maximum_transmit_rate)
return result
Code Review / csit.git / blobdiff