-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2018 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
:param tg_if1_adj_if: TG if1 adjecent interface.
:param tg_if2_adj_node: TG if2 adjecent node.
:param tg_if2_adj_if: TG if2 adjecent interface.
- :param test_type: 'L2' or 'L3' - src/dst MAC address.
+ :param test_type: 'L2', 'L3' or 'L7' - OSI Layer testing type.
:param tg_if1_dst_mac: Interface 1 destination MAC address.
:param tg_if2_dst_mac: Interface 2 destination MAC address.
:type tg_node: dict
:returns: nothing
:raises: RuntimeError in case of issue during initialization.
"""
-
- topo = Topology()
-
if tg_node['type'] != NodeType.TG:
raise RuntimeError('Node type is not a TG')
self._node = tg_node
if tg_node['subtype'] == NodeSubTypeTG.TREX:
- trex_path = "/opt/trex-core-2.34"
-
ssh = SSH()
ssh.connect(tg_node)
if int(ret) != 0:
raise RuntimeError('TRex installation failed.')
- if1_pci = topo.get_interface_pci_addr(tg_node, tg_if1)
- if2_pci = topo.get_interface_pci_addr(tg_node, tg_if2)
- if1_mac = topo.get_interface_mac(tg_node, tg_if1)
- if2_mac = topo.get_interface_mac(tg_node, tg_if2)
+ if1_pci = Topology().get_interface_pci_addr(tg_node, tg_if1)
+ if2_pci = Topology().get_interface_pci_addr(tg_node, tg_if2)
+ if1_addr = Topology().get_interface_mac(tg_node, tg_if1)
+ if2_addr = Topology().get_interface_mac(tg_node, tg_if2)
if test_type == 'L2':
- if1_adj_mac = if2_mac
- if2_adj_mac = if1_mac
+ if1_adj_addr = if2_addr
+ if2_adj_addr = if1_addr
elif test_type == 'L3':
- if1_adj_mac = topo.get_interface_mac(tg_if1_adj_node,
- tg_if1_adj_if)
- if2_adj_mac = topo.get_interface_mac(tg_if2_adj_node,
- tg_if2_adj_if)
+ if1_adj_addr = Topology().get_interface_mac(tg_if1_adj_node,
+ tg_if1_adj_if)
+ if2_adj_addr = Topology().get_interface_mac(tg_if2_adj_node,
+ tg_if2_adj_if)
+ elif test_type == 'L7':
+ if1_addr = Topology().get_interface_ip4(tg_node, tg_if1)
+ if2_addr = Topology().get_interface_ip4(tg_node, tg_if2)
+ if1_adj_addr = Topology().get_interface_ip4(tg_if1_adj_node,
+ tg_if1_adj_if)
+ if2_adj_addr = Topology().get_interface_ip4(tg_if2_adj_node,
+ tg_if2_adj_if)
else:
- raise ValueError("test_type unknown")
+ raise ValueError("Unknown Test Type")
+ # in case of switched environment we can override MAC addresses
if tg_if1_dst_mac is not None and tg_if2_dst_mac is not None:
- if1_adj_mac = tg_if1_dst_mac
- if2_adj_mac = tg_if2_dst_mac
+ if1_adj_addr = tg_if1_dst_mac
+ if2_adj_addr = tg_if2_dst_mac
if min(if1_pci, if2_pci) != if1_pci:
- if1_mac, if2_mac = if2_mac, if1_mac
if1_pci, if2_pci = if2_pci, if1_pci
- if1_adj_mac, if2_adj_mac = if2_adj_mac, if1_adj_mac
+ if1_addr, if2_addr = if2_addr, if1_addr
+ if1_adj_addr, if2_adj_addr = if2_adj_addr, if1_adj_addr
self._ifaces_reordered = True
- if1_mac_hex = "0x"+if1_mac.replace(":", ",0x")
- if2_mac_hex = "0x"+if2_mac.replace(":", ",0x")
- if1_adj_mac_hex = "0x"+if1_adj_mac.replace(":", ",0x")
- if2_adj_mac_hex = "0x"+if2_adj_mac.replace(":", ",0x")
-
- (ret, _, _) = ssh.exec_command(
- "sudo sh -c 'cat << EOF > /etc/trex_cfg.yaml\n"
- "- port_limit : 2\n"
- " version : 2\n"
- " interfaces : [\"{}\",\"{}\"]\n"
- " port_info :\n"
- " - dest_mac : [{}]\n"
- " src_mac : [{}]\n"
- " - dest_mac : [{}]\n"
- " src_mac : [{}]\n"
- "EOF'"\
- .format(if1_pci, if2_pci,
- if1_adj_mac_hex, if1_mac_hex,
- if2_adj_mac_hex, if2_mac_hex))
+ if test_type == 'L2' or test_type == 'L3':
+ (ret, _, _) = ssh.exec_command(
+ "sudo sh -c 'cat << EOF > /etc/trex_cfg.yaml\n"
+ "- port_limit: 2\n"
+ " version: 2\n"
+ " interfaces: [\"{0}\",\"{1}\"]\n"
+ " port_info:\n"
+ " - dest_mac: [{2}]\n"
+ " src_mac: [{3}]\n"
+ " - dest_mac: [{4}]\n"
+ " src_mac: [{5}]\n"
+ "EOF'"\
+ .format(if1_pci, if2_pci,
+ "0x"+if1_adj_addr.replace(":", ",0x"),
+ "0x"+if1_addr.replace(":", ",0x"),
+ "0x"+if2_adj_addr.replace(":", ",0x"),
+ "0x"+if2_addr.replace(":", ",0x")))
+ elif test_type == 'L7':
+ (ret, _, _) = ssh.exec_command(
+ "sudo sh -c 'cat << EOF > /etc/trex_cfg.yaml\n"
+ "- port_limit: 2\n"
+ " version: 2\n"
+ " interfaces: [\"{0}\",\"{1}\"]\n"
+ " port_info:\n"
+ " - ip: [{2}]\n"
+ " default_gw: [{3}]\n"
+ " - ip: [{4}]\n"
+ " default_gw: [{5}]\n"
+ "EOF'"\
+ .format(if1_pci, if2_pci,
+ if1_addr, if1_adj_addr,
+ if2_addr, if2_adj_addr))
+ else:
+ raise ValueError("Unknown Test Type")
if int(ret) != 0:
- raise RuntimeError('trex config generation error')
+ raise RuntimeError('TRex config generation error')
- max_startup_retries = 3
- while max_startup_retries > 0:
- # kill T-rex only if it is already running
- (ret, _, _) = ssh.exec_command(
+ for _ in range(0, 3):
+ # kill TRex only if it is already running
+ ssh.exec_command(
"sh -c 'pgrep t-rex && sudo pkill t-rex && sleep 3'")
- # configure T-rex
+ # configure TRex
(ret, _, _) = ssh.exec_command(
"sh -c 'cd {0}/scripts/ && sudo ./trex-cfg'"\
- .format(trex_path))
+ .format(Constants.TREX_INSTALL_DIR))
if int(ret) != 0:
raise RuntimeError('trex-cfg failed')
- # start T-rex
- (ret, _, _) = ssh.exec_command(
- "sh -c 'cd {0}/scripts/ && "
- "sudo nohup ./t-rex-64 -i -c 7 --iom 0 > /tmp/trex.log "
- "2>&1 &' > /dev/null"\
- .format(trex_path))
+ # start TRex
+ if test_type == 'L2' or test_type == 'L3':
+ (ret, _, _) = ssh.exec_command(
+ "sh -c 'cd {0}/scripts/ && "
+ "sudo nohup ./t-rex-64 -i -c 7 --iom 0 > /tmp/trex.log "
+ "2>&1 &' > /dev/null"\
+ .format(Constants.TREX_INSTALL_DIR))
+ elif test_type == 'L7':
+ (ret, _, _) = ssh.exec_command(
+ "sh -c 'cd {0}/scripts/ && "
+ "sudo nohup ./t-rex-64 --astf -i -c 7 --iom 0 > "
+ "/tmp/trex.log 2>&1 &' > /dev/null"\
+ .format(Constants.TREX_INSTALL_DIR))
+ else:
+ raise ValueError("Unknown Test Type")
if int(ret) != 0:
ssh.exec_command("sh -c 'cat /tmp/trex.log'")
raise RuntimeError('t-rex-64 startup failed')
- # get T-rex server info
+ # get TRex server info
(ret, _, _) = ssh.exec_command(
"sh -c 'sleep 3; "
"{0}/resources/tools/trex/trex_server_info.py'"\
.format(Constants.REMOTE_FW_DIR),
timeout=120)
if int(ret) == 0:
- # If we get info T-rex is running
+ # If we get info TRex is running
return
- # try again
- max_startup_retries -= 1
- # after max retries T-rex is still not responding to API
+ # after max retries TRex is still not responding to API
# critical error occurred
raise RuntimeError('t-rex-64 startup failed')
:param node: Traffic generator node.
:type node: dict
:returns: nothing
- :raises: RuntimeError if T-rex teardown failed.
+ :raises: RuntimeError if TRex teardown failed.
:raises: RuntimeError if node type is not a TG.
"""
if node['type'] != NodeType.TG:
def trex_stl_stop_remote_exec(node):
"""Execute script on remote node over ssh to stop running traffic.
- :param node: T-REX generator node.
+ :param node: TRex generator node.
:type node: dict
:returns: Nothing
:raises: RuntimeError if stop traffic script fails.
"trex_stateless_stop.py'".format(Constants.REMOTE_FW_DIR))
if int(ret) != 0:
- raise RuntimeError('T-rex stateless runtime error')
+ raise RuntimeError('TRex stateless runtime error')
def trex_stl_start_remote_exec(self, duration, rate, framesize,
traffic_type, async_call=False,
timeout=int(duration) + 60)
if int(ret) != 0:
- raise RuntimeError('T-rex stateless runtime error')
+ raise RuntimeError('TRex stateless runtime error')
elif async_call:
#no result
self._received = None
Code Review / csit.git / blobdiff