CSIT-427: Honeycomb ietf-ACL tests - L2

[csit.git] / resources / libraries / python / honeycomb / HcAPIKwInterfaces.py

diff --git a/resources/libraries/python/honeycomb/HcAPIKwInterfaces.py b/resources/libraries/python/honeycomb/HcAPIKwInterfaces.py
index 4eaef11..83267b5 100644 (file)
--- a/resources/libraries/python/honeycomb/HcAPIKwInterfaces.py
+++ b/resources/libraries/python/honeycomb/HcAPIKwInterfaces.py
@@ -16,7 +16,7 @@
 The keywords make possible to put and get configuration data and to get
 operational data.
 """
 The keywords make possible to put and get configuration data and to get
 operational data.
 """

-
+from resources.libraries.python.topology import Topology

 from resources.libraries.python.HTTPRequest import HTTPCodes
 from resources.libraries.python.honeycomb.HoneycombSetup import HoneycombError
 from resources.libraries.python.honeycomb.HoneycombUtil \
 from resources.libraries.python.HTTPRequest import HTTPCodes
 from resources.libraries.python.honeycomb.HoneycombSetup import HoneycombError
 from resources.libraries.python.honeycomb.HoneycombUtil \


@@ -222,7 +222,7 @@ class InterfaceKeywords(object):
         depending on the parameter "state".
 
         :param node: Honeycomb node.
         depending on the parameter "state".
 
         :param node: Honeycomb node.

-        :param interface: The name of interface.
+        :param interface: Interface name, key, link name or sw_if_index.

         :param state: The requested state, only "up" and "down" are valid
         values.
         :type node: dict
         :param state: The requested state, only "up" and "down" are valid
         values.
         :type node: dict


@@ -237,9 +237,29 @@ class InterfaceKeywords(object):
         intf_state = {"up": "true",
                       "down": "false"}
 
         intf_state = {"up": "true",
                       "down": "false"}
 

-        path = ("interfaces", ("interface", "name", str(interface)), "enabled")
-        return InterfaceKeywords._set_interface_properties(
-            node, interface, path, intf_state[state.lower()])
+        interface = Topology.convert_interface_reference(
+            node, interface, "name")
+
+        intf = interface.replace("/", "%2F")
+        path = "/interface/{0}".format(intf)
+
+        status_code, resp = HcUtil.\
+            get_honeycomb_data(node, "config_vpp_interfaces", path)
+        if status_code != HTTPCodes.OK:
+            raise HoneycombError(
+                "Not possible to get configuration information about the "
+                "interfaces. Status code: {0}.".format(status_code))
+
+        resp["interface"][0]["enabled"] = intf_state[state.lower()]
+
+        status_code, resp = HcUtil. \
+            put_honeycomb_data(node, "config_vpp_interfaces", resp, path,
+                               data_representation=DataRepresentation.JSON)
+        if status_code != HTTPCodes.OK:
+            raise HoneycombError(
+                "The configuration of interface '{0}' was not successful. "
+                "Status code: {1}.".format(interface, status_code))
+        return resp

 
     @staticmethod
     def set_interface_up(node, interface):
 
     @staticmethod
     def set_interface_up(node, interface):


@@ -275,7 +295,7 @@ class InterfaceKeywords(object):
         """Add a new bridge domain to an interface and set its parameters.
 
         :param node: Honeycomb node.
         """Add a new bridge domain to an interface and set its parameters.
 
         :param node: Honeycomb node.

-        :param interface: The name of interface.
+        :param interface: Interface name, key, link name or sw_if_index.

         :param bd_name: Bridge domain name.
         :param split_horizon_group: Split-horizon group name.
         :param bvi: The bridged virtual interface.
         :param bd_name: Bridge domain name.
         :param split_horizon_group: Split-horizon group name.
         :param bvi: The bridged virtual interface.


@@ -289,6 +309,9 @@ class InterfaceKeywords(object):
         :raises HoneycombError: If the interface is not present on the node.
         """
 
         :raises HoneycombError: If the interface is not present on the node.
         """
 

+        interface = Topology.convert_interface_reference(
+            node, interface, "name")
+

         v3po_l2 = {"bridge-domain": str(bd_name)}
         if split_horizon_group:
             v3po_l2["split-horizon-group"] = str(split_horizon_group)
         v3po_l2 = {"bridge-domain": str(bd_name)}
         if split_horizon_group:
             v3po_l2["split-horizon-group"] = str(split_horizon_group)


@@ -300,6 +323,33 @@ class InterfaceKeywords(object):
         return InterfaceKeywords._set_interface_properties(
             node, interface, path, v3po_l2)
 
         return InterfaceKeywords._set_interface_properties(
             node, interface, path, v3po_l2)
 

+    @staticmethod
+    def remove_bridge_domain_from_interface(node, interface):
+        """Remove bridge domain assignment from interface.
+
+        :param node: Honeycomb node.
+        :param interface: Interface name, key, link name or sw_if_index.
+        :type node: dict
+        :type interface: str or int
+
+        :raises HoneycombError: If the operation fails.
+        """
+
+        interface = Topology.convert_interface_reference(
+            node, interface, "name")
+
+        intf = interface.replace("/", "%2F")
+
+        path = "/interface/{0}/v3po:l2".format(intf)
+
+        status_code, _ = HcUtil.delete_honeycomb_data(
+            node, "config_vpp_interfaces", path)
+
+        if status_code != HTTPCodes.OK:
+            raise HoneycombError(
+                "Could not remove bridge domain assignment from interface "
+                "'{0}'. Status code: {1}.".format(interface, status_code))
+

     @staticmethod
     def get_bd_oper_data_from_interface(node, interface):
         """Returns operational data about bridge domain settings in the
     @staticmethod
     def get_bd_oper_data_from_interface(node, interface):
         """Returns operational data about bridge domain settings in the


@@ -350,7 +400,7 @@ class InterfaceKeywords(object):
 
     @staticmethod
     def configure_interface_ipv4(node, interface, param, value):
 
     @staticmethod
     def configure_interface_ipv4(node, interface, param, value):

-        """Configure IPv4 parameters of interface
+        """Configure IPv4 parameters of interface.

 
         :param node: Honeycomb node.
         :param interface: The name of interface.
 
         :param node: Honeycomb node.
         :param interface: The name of interface.


@@ -366,6 +416,9 @@ class InterfaceKeywords(object):
         :raises HoneycombError: If the parameter is not valid.
         """
 
         :raises HoneycombError: If the parameter is not valid.
         """
 

+        interface = Topology.convert_interface_reference(
+            node, interface, "name")
+

         if param not in InterfaceKeywords.IPV4_PARAMS:
             raise HoneycombError("The parameter {0} is invalid.".format(param))
 
         if param not in InterfaceKeywords.IPV4_PARAMS:
             raise HoneycombError("The parameter {0} is invalid.".format(param))
 


@@ -393,6 +446,9 @@ class InterfaceKeywords(object):
         :raises HoneycombError: If the provided netmask or prefix is not valid.
         """
 
         :raises HoneycombError: If the provided netmask or prefix is not valid.
         """
 

+        interface = Topology.convert_interface_reference(
+            node, interface, "name")
+

         path = ("interfaces", ("interface", "name", interface), "ietf-ip:ipv4")
         if isinstance(network, basestring):
             address = {"address": [{"ip": ip_addr, "netmask": network}, ]}
         path = ("interfaces", ("interface", "name", interface), "ietf-ip:ipv4")
         if isinstance(network, basestring):
             address = {"address": [{"ip": ip_addr, "netmask": network}, ]}


@@ -421,6 +477,9 @@ class InterfaceKeywords(object):
         :raises HoneycombError: If the provided netmask or prefix is not valid.
         """
 
         :raises HoneycombError: If the provided netmask or prefix is not valid.
         """
 

+        interface = Topology.convert_interface_reference(
+            node, interface, "name")
+

         path = ("interfaces", ("interface", "name", interface), "ietf-ip:ipv4",
                 "address")
         if isinstance(network, basestring):
         path = ("interfaces", ("interface", "name", interface), "ietf-ip:ipv4",
                 "address")
         if isinstance(network, basestring):


@@ -1380,3 +1439,82 @@ class InterfaceKeywords(object):
                 "The configuration of interface '{0}' was not successful. "
                 "Status code: {1}.".format(interface, status_code))
         return resp
                 "The configuration of interface '{0}' was not successful. "
                 "Status code: {1}.".format(interface, status_code))
         return resp

+
+    @staticmethod
+    def create_pbb_sub_interface(node, intf, sub_if_id, params):
+        """Creates a PBB sub-interface on the given interface and sets its
+        parameters.
+
+        :param node: Honeycomb node.
+        :param intf: The interface where PBB sub-interface will be configured.
+        :param sub_if_id: Sub-interface ID.
+        :param params: Configuration parameters of the sub-interface to be
+        created.
+        :type node: dict
+        :type intf: str
+        :type sub_if_id: str or int
+        :type params: dict
+        :return: Content of response.
+        :rtype: bytearray
+        :raises HoneycombError: If the configuration of sub-interface is not
+        successful.
+        """
+
+        interface = intf.replace("/", "%2F")
+        path = "/interface/{0}/sub-interfaces:sub-interfaces/sub-interface/" \
+               "{1}".format(interface, sub_if_id)
+        status_code, resp = HcUtil. \
+            put_honeycomb_data(node, "config_vpp_interfaces", params, path,
+                               data_representation=DataRepresentation.JSON)
+        if status_code != HTTPCodes.OK:
+            raise HoneycombError(
+                "The configuration of PBB sub-interface '{0}' was not "
+                "successful. Status code: {1}.".format(intf, status_code))
+        return resp
+
+    @staticmethod
+    def delete_pbb_sub_interface(node, intf, sub_if_id):
+        """Deletes the given PBB sub-interface.
+
+        :param node: Honeycomb node.
+        :param intf: The interface where PBB sub-interface will be deleted.
+        :param sub_if_id: ID of the PBB sub-interface to be deleted.
+        :type node: dict
+        :type intf: str
+        :type sub_if_id: str or int
+        :return: Content of response.
+        :rtype: bytearray
+        :raises HoneycombError: If the removal of sub-interface is not
+        successful.
+        """
+
+        interface = intf.replace("/", "%2F")
+        path = "/interface/{0}/sub-interfaces:sub-interfaces/sub-interface/" \
+               "{1}".format(interface, sub_if_id)
+
+        status_code, resp = HcUtil. \
+            delete_honeycomb_data(node, "config_vpp_interfaces", path)
+        if status_code != HTTPCodes.OK:
+            raise HoneycombError(
+                "The removal of pbb sub-interface '{0}' was not successful. "
+                "Status code: {1}.".format(intf, status_code))
+        return resp
+
+    @staticmethod
+    def get_pbb_sub_interface_oper_data(node, intf, sub_if_id):
+        """Retrieves PBB sub-interface operational data from Honeycomb.
+
+        :param node: Honeycomb node.
+        :param intf: The interface where PBB sub-interface is located.
+        :param sub_if_id: ID of the PBB sub-interface.
+        :type node: dict
+        :type intf: str
+        :type sub_if_id: str or int
+        :return: PBB sub-interface operational data.
+        :rtype: dict
+        :raises HoneycombError: If the removal of sub-interface is not
+        successful.
+        """
+
+        interface = "{0}.{1}".format(intf, sub_if_id)
+        return InterfaceKeywords.get_interface_oper_data(node, interface)