# limitations under the License.
*** Settings ***
-| Library | resources.libraries.python.InterfaceUtil
-| Library | resources.libraries.python.IPUtil
-| Library | resources.libraries.python.IPv6Util
+| Library | resources.libraries.python.Classify
| Library | resources.libraries.python.Policer
-| Library | resources.libraries.python.TrafficScriptExecutor
-| ...
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| ...
+|
| Documentation | Policer keywords
*** Keywords ***
-| Configure topology for IPv4 policer test
-| | [Documentation] | Setup topology for IPv4 policer testing.
-| | ...
-| | ... | _NOTE:_ This KW sets following test case variables:
-| | ... | - dut_to_tg_if1_ip - DUT first interface IP address. Type: string
-| | ... | - dut_to_tg_if2_ip - DUT second interface IP address. Type: string
-| | ... | - tg_to_dut_if1_ip - TG first interface IP address. Type: string
-| | ... | - tg_to_dut_if2_ip - TG second interface IP address. Type: string
-| | Configure path in 2-node circular topology | ${nodes['TG']}
-| | ... | ${nodes['DUT1']} | ${nodes['TG']}
-| | Set interfaces in 2-node circular topology up
-| | VPP Interface Set IP Address | ${dut_node} | ${dut_to_tg_if1}
-| | ... | ${dut_to_tg_if1_ip4} | ${ip4_plen}
-| | VPP Interface Set IP Address | ${dut_node} | ${dut_to_tg_if2}
-| | ... | ${dut_to_tg_if2_ip4} | ${ip4_plen}
-| | VPP Add IP Neighbor | ${dut_node} | ${dut_to_tg_if2} | ${tg_to_dut_if2_ip4}
-| | ... | ${tg_to_dut_if2_mac}
-| | Set Test Variable | ${dut_to_tg_if1_ip} | ${dut_to_tg_if1_ip4}
-| | Set Test Variable | ${dut_to_tg_if2_ip} | ${dut_to_tg_if2_ip4}
-| | Set Test Variable | ${tg_to_dut_if1_ip} | ${tg_to_dut_if1_ip4}
-| | Set Test Variable | ${tg_to_dut_if2_ip} | ${tg_to_dut_if2_ip4}
+| Initialize IPv4 policer 2r3c-${t} in circular topology
+| | [Documentation]
+| | ... | Setup of 2r3c color-aware or color-blind policer with dst IPv4 match
+| | ... | on all DUT nodes in 2-node / 3-node circular topology. Policer is
+| | ... | applied on links TG - DUTx.
+| |
+| | ${policer_index}= | Policer Set Configuration | ${dut1} | policer1 | ${cir}
+| | ... | ${eir} | ${cb} | ${eb} | pps | Closest | 2R3C_RFC_2698 | Transmit
+| | ... | Mark_and_Transmit | Transmit | ${t} | exceed_dscp=${dscp}
+| | ${table_idx} | ${skip_n} | ${match_n}= | Vpp Creates Classify Table L3
+| | ... | ${dut1} | ip4 | dst | 255.255.255.255
+| | ${pre_color}= | Policer Classify Get Precolor | exceed_color
+| | Vpp Configures Classify Session L3 | ${dut1} | permit | ${table_idx}
+| | ... | ${skip_n} | ${match_n} | ip4 | dst | 20.20.20.2
+| | ... | hit_next_index=${policer_index} | opaque_index=${pre_color}
+| | Policer Classify Set Interface | ${dut1} | ${dut1_if1}
+| | ... | ip4_table_index=${table_idx}
+| |
+| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error
+| | ... | Variable Should Exist | ${dut2}
+| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | Set Variable | ${dut2}
+| | ... | ELSE | Set Variable | ${dut1}
+| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | Set Variable | ${dut2_if2}
+| | ... | ELSE | Set Variable | ${dut1_if2}
+| |
+| | ${policer_index}= | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | Policer Set Configuration | ${dut} | policer2 | ${cir}
+| | ... | ${eir} | ${cb} | ${eb} | pps | Closest | 2R3C_RFC_2698 | Transmit
+| | ... | Mark_and_Transmit | Transmit | ${t} | exceed_dscp=${dscp}
+| | ... | ELSE | Set Variable | ${policer_index}
+| | ${table_idx} | ${skip_n} | ${match_n}=
+| | ... | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | Vpp Creates Classify Table L3 | ${dut} | ip4 | dst | 255.255.255.255
+| | ... | ELSE | Set Variable | ${table_idx} | ${skip_n} | ${match_n}
+| | Vpp Configures Classify Session L3 | ${dut} | permit | ${table_idx}
+| | ... | ${skip_n} | ${match_n} | ip4 | dst | 10.10.10.2
+| | ... | hit_next_index=${policer_index} | opaque_index=${pre_color}
+| | Policer Classify Set Interface | ${dut} | ${dut_if2}
+| | ... | ip4_table_index=${table_idx}
-| Configure topology for IPv6 policer test
-| | [Documentation] | Setup topology for IPv6 policer testing.
-| | ...
-| | ... | _NOTE:_ This KW sets following test case variables:
-| | ... | - dut_to_tg_if1_ip - DUT first interface IP address. Type: string
-| | ... | - dut_to_tg_if2_ip - DUT second interface IP address. Type: string
-| | ... | - tg_to_dut_if1_ip - TG first interface IP address. Type: string
-| | ... | - tg_to_dut_if2_ip - TG second interface IP address. Type: string
-| | Configure path in 2-node circular topology | ${nodes['TG']}
-| | ... | ${nodes['DUT1']} | ${nodes['TG']}
-| | Set interfaces in 2-node circular topology up
-| | VPP Interface Set IP Address
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip6} | ${ip6_plen}
-| | VPP Interface Set IP Address
-| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip6} | ${ip6_plen}
-| | VPP Add IP Neighbor | ${dut_node} | ${dut_to_tg_if2} | ${tg_to_dut_if2_ip6}
-| | ... | ${tg_to_dut_if2_mac}
-| | Vpp All RA Suppress Link Layer | ${nodes}
-| | Set Test Variable | ${dut_to_tg_if1_ip} | ${dut_to_tg_if1_ip6}
-| | Set Test Variable | ${dut_to_tg_if2_ip} | ${dut_to_tg_if2_ip6}
-| | Set Test Variable | ${tg_to_dut_if1_ip} | ${tg_to_dut_if1_ip6}
-| | Set Test Variable | ${tg_to_dut_if2_ip} | ${tg_to_dut_if2_ip6}
+| Initialize IPv6 policer 2r3c-${t} in circular topology
+| | [Documentation]
+| | ... | Setup of 2r3c color-aware or color-blind policer with dst IPv6 match
+| | ... | on all DUT nodes in 2-node / 3-node circular topology. Policer is
+| | ... | applied on links TG - DUTx.
+| |
+| | ${policer_index}= | Policer Set Configuration | ${dut1} | policer1 | ${cir}
+| | ... | ${eir} | ${cb} | ${eb} | pps | Closest | 2R3C_RFC_2698 | Transmit
+| | ... | Mark_and_Transmit | Transmit | ${t} | exceed_dscp=${dscp}
+| | ${table_idx} | ${skip_n} | ${match_n}= | Vpp Creates Classify Table L3
+| | ... | ${dut1} | ip6 | dst | ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
+| | ${pre_color}= | Policer Classify Get Precolor | exceed_color
+| | Vpp Configures Classify Session L3 | ${dut1} | permit | ${table_idx}
+| | ... | ${skip_n} | ${match_n} | ip6 | dst | 2001:2::2
+| | ... | hit_next_index=${policer_index} | opaque_index=${pre_color}
+| | Policer Classify Set Interface | ${dut1} | ${dut1_if1}
+| | ... | ip6_table_index=${table_idx}
+| |
+| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error
+| | ... | Variable Should Exist | ${dut2}
+| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | Set Variable | ${dut2}
+| | ... | ELSE | Set Variable | ${dut1}
+| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | Set Variable | ${dut2_if2}
+| | ... | ELSE | Set Variable | ${dut1_if2}
+| |
+| | ${policer_index}= | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | Policer Set Configuration | ${dut} | policer2 | ${cir}
+| | ... | ${eir} | ${cb} | ${eb} | pps | Closest | 2R3C_RFC_2698 | Transmit
+| | ... | Mark_and_Transmit | Transmit | ${t} | exceed_dscp=${dscp}
+| | ... | ELSE | Set Variable | ${policer_index}
+| | ${table_idx} | ${skip_n} | ${match_n}=
+| | ... | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | Vpp Creates Classify Table L3
+| | ... | ${dut} | ip6 | dst | ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
+| | ... | ELSE | Set Variable | ${table_idx} | ${skip_n} | ${match_n}
+| | Vpp Configures Classify Session L3 | ${dut} | permit | ${table_idx}
+| | ... | ${skip_n} | ${match_n} | ip6 | dst | 2001:1::2
+| | ... | hit_next_index=${policer_index} | opaque_index=${pre_color}
+| | Policer Classify Set Interface | ${dut} | ${dut_if2}
+| | ... | ip6_table_index=${table_idx}
-| Send packet and verify marking
-| | [Documentation] | Send packet and verify DSCP of the received packet.
-| | ...
+| Show Classify Tables Verbose on all DUTs
+| | [Documentation] | Show classify tables verbose on all DUT nodes in topology.
+| |
| | ... | *Arguments:*
-| | ... | - node - TG node. Type: dictionary
-| | ... | - tx_if - TG transmit interface. Type: string
-| | ... | - rx_if - TG receive interface. Type: string
-| | ... | - src_mac - Packet source MAC. Type: string
-| | ... | - dst_mac - Packet destination MAC. Type: string
-| | ... | - src_ip - Packet source IP address. Type: string
-| | ... | - dst_ip - Packet destination IP address. Type: string
-| | ... | - dscp - DSCP value to verify. Type: enum
-| | ...
+| | ... | - nodes - Topology. Type: dictionary
+| |
| | ... | *Example:*
-| | ... | \| ${dscp}= \| DSCP AF22 \|
-| | ... | \| Send packet and verify marking \| ${nodes['TG']} \| eth1 \| eth2 \
-| | ... | \| 08:00:27:87:4d:f7 \| 52:54:00:d4:d8:22 \| 192.168.122.2 \
-| | ... | \| 192.168.122.1 \| ${dscp} \|
-| | [Arguments] | ${node} | ${tx_if} | ${rx_if} | ${src_mac} | ${dst_mac}
-| | ... | ${src_ip} | ${dst_ip} | ${dscp}
-| | ${tx_if_name}= | Get Interface Name | ${node} | ${tx_if}
-| | ${rx_if_name}= | Get Interface Name | ${node} | ${rx_if}
-| | ${args}= | Traffic Script Gen Arg | ${rx_if_name} | ${tx_if_name}
-| | ... | ${src_mac} | ${dst_mac} | ${src_ip} | ${dst_ip}
-| | ${dscp_num}= | Get DSCP Num Value | ${dscp}
-| | ${args}= | Set Variable | ${args} --dscp ${dscp_num}
-| | Run Traffic Script On Node | policer.py | ${node} | ${args}
+| |
+| | ... | \| Show Classify Tables Verbose on all DUTs \| ${nodes} \|
+| |
+| | [Arguments] | ${nodes}
+| |
+| | ${duts}= | Get Matches | ${nodes} | DUT*
+| | FOR | ${dut} | IN | @{duts}
+| | | Show Classify Tables Verbose | ${nodes['${dut}']}
+| | END
Code Review / csit.git / blobdiff