+++ /dev/null
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.InterfaceUtil
-| Library | resources.libraries.python.honeycomb.HcAPIKwInterfaces.InterfaceKeywords
-| Library | resources.libraries.python.IPUtil
-| Library | resources.libraries.python.TrafficScriptExecutor
-
-*** Keywords ***
-| Honeycomb configures interface state
-| | [Documentation] | Uses Honeycomb API to change the admin state\
-| | ... | of the specified interface.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ... | - state - state to set on interface. Type:string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb configures interface state \| ${nodes['DUT1']} \
-| | ... | \| GigabitEthernet0/8/0 \| up \|
-| | [Arguments] | ${node} | ${interface} | ${state}
-| | Honeycomb Set Interface State | ${node} | ${interface} | ${state}
-
-| Interface state from Honeycomb should be
-| | [Documentation] | Retrieves interface admin state through Honeycomb and\
-| | ... | compares with state supplied in argument.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ... | - state - expected interface state. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Interface state from Honeycomb should be \| ${nodes['DUT1']} \
-| | ... | \| GigabitEthernet0/8/0 \| up \|
-| | [Arguments] | ${node} | ${interface} | ${state}
-| | ${api_data}= | Get interface oper data | ${node} | ${interface}
-| | ${api_state}= | Set Variable | ${api_data['admin-status']}
-| | Should be equal | ${api_state} | ${state}
-
-| Interface state from VAT should be
-| | [Documentation] | Retrieves interface admin state through VAT and compares\
-| | ... | with state supplied in argument.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ... | - state - expected interface state. Type: string
-| | ...
-| | ... | _NOTE:_ Vat returns state as int (1/0) instead of string (up/down).
-| | ... | This keyword also handles translation.
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Interface state from VAT should be \| ${nodes['DUT1']} \
-| | ... | \| GigabitEthernet0/8/0 \| up \|
-| | [Arguments] | ${node} | ${interface} | ${state}
-| | ${vat_data}= | VPP get interface data | ${node} | ${interface}
-| | ${vat_state}= | Set Variable if
-| | ... | ${vat_data['admin_up_down']} == 1 | up | down
-| | Should be equal | ${vat_state} | ${state}
-
-| Honeycomb sets interface IPv4 address
-| | [Documentation] | Uses Honeycomb API to change ipv4 address\
-| | ... | of the specified interface. Any existing addresses will be removed.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ... | - address - IP address to set. Type: string
-| | ... | - netmask - subnet mask to set. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb sets interface IPv4 address \| ${nodes['DUT1']} \
-| | ... | \| GigabitEthernet0/8/0 \| 192.168.0.2 \| 255.255.255.0 \|
-| | [Arguments] | ${node} | ${interface} | ${address} | ${netmask}
-| | Add first ipv4 address
-| | ... | ${node} | ${interface} | ${address} | ${netmask}
-
-| Honeycomb sets interface IPv4 address with prefix
-| | [Documentation] | Uses Honeycomb API to assign an ipv4 address to the\
-| | ... | specified interface. Any existing addresses will be removed.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ... | - address - IP address to set. Type: string
-| | ... | - prefix - length of address network prefix. Type: integer
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb sets interface IPv4 address with prefix \
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 192.168.0.2 \| 24 \|
-| | [Arguments] | ${node} | ${interface} | ${address} | ${prefix}
-| | Add first ipv4 address
-| | ... | ${node} | ${interface} | ${address} | ${prefix}
-
-| Honeycomb adds interface IPv4 address
-| | [Documentation] | Uses Honeycomb API to add an ipv4 address to the\
-| | ... | specified interface, without removing existing addresses.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ... | - address - IP address to set. Type: string
-| | ... | - prefix - length of address network prefix. Type: integer
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb adds interface IPv4 address \
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 192.168.0.2 \| 24 \|
-| | [Arguments] | ${node} | ${interface} | ${address} | ${prefix}
-| | Add ipv4 address
-| | ... | ${node} | ${interface} | ${address} | ${prefix}
-
-| Honeycomb fails to add interface IPv4 address
-| | [Documentation] | Uses Honeycomb API to add an ipv4 address to the\
-| | ... | specified interface, and expects to fail with code 500.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ... | - address - IP address to set. Type: string
-| | ... | - prefix - length of address network prefix. Type: integer
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb fails to add interface IPv4 address \
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 192.168.0.2 \| 24 \|
-| | [Arguments] | ${node} | ${interface} | ${address} | ${prefix}
-| | Run Keyword and Expect Error | *not successful. Status code: 500.
-| | ... | Honeycomb adds interface IPv4 address
-| | ... | ${node} | ${interface} | ${address} | ${prefix}
-
-| IPv4 address from Honeycomb should be
-| | [Documentation] | Retrieves interface ipv4 address through Honeycomb\
-| | ... | and compares with state supplied in argument.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ... | - address - IP address to expect. Type: string
-| | ... | - prefix - prefix length to expect. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| IPv4 address from Honeycomb should be \| ${nodes['DUT1']} \
-| | ... | \| GigabitEthernet0/8/0 \| 192.168.0.2 \| ${24} \|
-| | [Arguments] | ${node} | ${interface} | ${address} | ${prefix}
-| | ${api_data}= | Get interface oper data | ${node} | ${interface}
-| | ${settings}= | Create Dictionary
-| | ... | ip=${address} | prefix-length=${prefix}
-| | Should contain | ${api_data['ietf-ip:ipv4']['address']} | ${settings}
-
-| IPv4 address from VAT should be
-| | [Documentation] | Retrieves interface ipv4 address through VAT and\
-| | ... | compares with state supplied in argument.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ... | - address - IP address to expect. Type: string
-| | ... | - prefix - prefix length to expect. Type: string
-| | ... | - netmask - subnet mask to expect. Type: string
-| | ... | - sw_if_index - Index of interface. Type: integer
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| IPv4 address from VAT should be \| ${nodes['DUT1']} \
-| | ... | \| GigabitEthernet0/8/0 \| 192.168.0.2 \| ${24} \| 255.255.255.0 \|
-| | [Arguments] | ${node} | ${interface} | ${address} | ${prefix} | ${netmask}
-| | ${sw_if_index}= | Vpp Get Interface Sw Index | ${node} | ${interface}
-| | ${vpp_data}= | VPP get interface ip addresses
-| | ... | ${node} | ${interface} | ipv4
-| | ${settings}= | Create Dictionary
-| | ... | ip=${address} | netmask=${netmask} | sw_if_index=${sw_if_index}
-| | ... | prefix_length=${prefix} | is_ipv6=${0}
-| | Should contain | ${vpp_data} | ${settings}
-
-| Honeycomb removes interface IPv4 addresses
-| | [Documentation] | Removes all configured ipv4 addresses from the specified\
-| | ... | interface.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb removes interface IPv4 addresses \| ${nodes['DUT1']} \
-| | ... | \| GigabitEthernet0/8/0 \|
-| | [Arguments] | ${node} | ${interface}
-| | Remove all ipv4 addresses | ${node} | ${interface}
-
-| IPv4 address from Honeycomb should be empty
-| | [Documentation] | Retrieves interface ipv4 configuration through Honeycomb\
-| | ... | and expects to find no IPv4 addresses.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| IPv4 address from Honeycomb should be empty\| ${nodes['DUT1']} \
-| | ... | \| GigabitEthernet0/8/0 \|
-| | [Arguments] | ${node} | ${interface}
-| | ${api_data}= | Get interface oper data | ${node} | ${interface}
-| | Run keyword and expect error | *KeyError:*
-| | ... | Set Variable | ${api_data['ietf-ip:ipv4']['address']}
-
-| IPv4 address from VAT should be empty
-| | [Documentation] | Retrieves interface ipv4 configuration through VAT and\
-| | ... | and expects to find no ipv4 addresses.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| IPv4 config from VAT should be empty \| ${nodes['DUT1']} \
-| | ... | \| GigabitEthernet0/8/0 \|
-| | [Arguments] | ${node} | ${interface}
-| | ${data}= | VPP get interface ip addresses | ${node} | ${interface} | ipv4
-| | Should be empty | ${data}
-
-| Honeycomb adds interface IPv4 neighbor
-| | [Documentation] | Uses Honeycomb API to assign an ipv4 neighbor to the\
-| | ... | specified interface.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ... | - fib_address - IP address to add to fib table. Type: string
-| | ... | - fib_mac - MAC address to add to fib table. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb adds interface IPv4 neighbor \| ${nodes['DUT1']} \
-| | ... | \| GigabitEthernet0/8/0 \| 192.168.0.3 \| 08:00:27:c0:5d:37 \
-| | [Arguments] | ${node} | ${interface} | ${fib_address} | ${fib_mac}
-| | Add ipv4 neighbor
-| | ... | ${node} | ${interface} | ${fib_address} | ${fib_mac}
-
-| IPv4 neighbor from Honeycomb should be
-| | [Documentation] | Retrieves ipv4 neighbor list through Honeycomb\
-| | ... | and checks if it contains address supplied in arguments.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ... | - ip_address - ipv4 address of expected neighbor entry. Type: string
-| | ... | - mac_address - MAC address of expected neighbor entry. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| IPv4 neighbor from Honeycomb should be \| ${nodes['DUT1']} \
-| | ... | \| GigabitEthernet0/8/0 \| 192.168.0.4 \| 08:00:27:60:26:ab \|
-| | [Arguments] | ${node} | ${interface} | ${ip_address} | ${mac_address}
-| | ${api_data}= | Get interface oper data | ${node} | ${interface}
-| | ${settings}= | Create Dictionary
-| | ... | ip=${ip_address} | link-layer-address=${mac_address} | origin=static
-| | Should contain | ${api_data['ietf-ip:ipv4']['neighbor']} | ${settings}
-
-| Honeycomb clears all interface IPv4 neighbors
-| | [Documentation] | Uses Honeycomb API to remove all ipv4 neighbors from the\
-| | ... | specified interface.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb clears all interface IPv4 neighbors \| ${nodes['DUT1']} \
-| | ... | \| GigabitEthernet0/8/0 \|
-| | [Arguments] | ${node} | ${interface}
-| | Remove all ipv4 neighbors | ${node} | ${interface}
-
-| IPv4 neighbor from Honeycomb should be empty
-| | [Documentation] | Retrieves ipv4 neighbor list through Honeycomb\
-| | ... | and expects to find no ipv4 neighbors.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| IPv4 neighbor from Honeycomb should be empty \| ${nodes['DUT1']} \
-| | ... | \| GigabitEthernet0/8/0 \|
-| | [Arguments] | ${node} | ${interface}
-| | ${api_data}= | Get interface oper data | ${node} | ${interface}
-| | Run keyword and expect error | *KeyError:*
-| | ... | Set Variable | ${api_data['ietf-ip:ipv4']['neighbor'][0]['ip']}
-
-| Honeycomb sets interface IPv6 address
-| | [Documentation] | Uses Honeycomb API to change ipv6 address\
-| | ... | of the specified interface. Existing IPv6 addresses will be removed,\
-| | ... | with the exception of self-configured link-layer IPv6.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ... | - address - IP address to set. Type: string
-| | ... | - prefix - length of subnet prefix to set. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb sets interface IPv6 address \| ${nodes['DUT1']} \
-| | ... | \| GigabitEthernet0/8/0 \| 10::10 \| 64 \|
-| | [Arguments] | ${node} | ${interface} | ${address} | ${prefix}
-| | Add first ipv6 address
-| | ... | ${node} | ${interface} | ${address} | ${prefix}
-
-| Honeycomb adds interface IPv6 address
-| | [Documentation] | Uses Honeycomb API to add an ipv6 address\
-| | ... | to the specified interface.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ... | - address - IP address to set. Type: string
-| | ... | - prefix - length of subnet prefix to set. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb adds interface IPv6 address \| ${nodes['DUT1']} \
-| | ... | \| GigabitEthernet0/8/0 \| 10::10 \| 64 \|
-| | [Arguments] | ${node} | ${interface} | ${address} | ${prefix}
-| | Add ipv6 address
-| | ... | ${node} | ${interface} | ${address} | ${prefix}
-
-| Honeycomb fails to add interface IPv6 address
-| | [Documentation] | Uses Honeycomb API to add an ipv6 address to the\
-| | ... | specified interface, and expects to fail with code 500.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ... | - address - IP address to set. Type: string
-| | ... | - prefix - length of address network prefix. Type:integer
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb fails to add interface IPv6 address \
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 10::10 \| 64 \|
-| | [Arguments] | ${node} | ${interface} | ${address} | ${prefix}
-| | Run Keyword and Expect Error | *not successful. Status code: 500.
-| | ... | Honeycomb adds interface IPv6 address
-| | ... | ${node} | ${interface} | ${address} | ${prefix}
-
-| IPv6 address from Honeycomb should contain
-| | [Documentation] | Retrieves interface ipv6 address through Honeycomb\
-| | ... | and compares with state supplied in argument.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ... | - address - IP address to expect. Type: string
-| | ... | - prefix - length of subnet prefix to expect. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| IPv6 address from Honeycomb should contain \| ${nodes['DUT1']} \
-| | ... | \| GigabitEthernet0/8/0 \| 10::10 \| 64 \|
-| | [Arguments] | ${node} | ${interface} | ${address} | ${prefix}
-| | ${api_data}= | Get interface oper data | ${node} | ${interface}
-| | ${settings}= | Create Dictionary
-| | ... | ip=${address} | prefix-length=${prefix}
-| | Should contain | ${api_data['ietf-ip:ipv6']['address']} | ${settings}
-
-| IPv6 address from VAT should contain
-| | [Documentation] | Retrieves interface ipv6 address through VAT and\
-| | ... | compares with state supplied in argument.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ... | - address - IP address to expect. Type: string
-| | ... | - prefix - length of subnet prefix to expect. Type: string
-| | ... | - sw_if_index - index of interface. Type: integer
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| IPv6 address from VAT should contain \| ${nodes['DUT1']} \
-| | ... | \| GigabitEthernet0/8/0 \| 10::10 \| 64 \|
-| | [Arguments] | ${node} | ${interface} | ${address} | ${prefix} | ${netmask}
-| | ${sw_if_index}= | Vpp Get Interface Sw Index | ${node} | ${interface}
-| | ${vpp_data}= | VPP get interface ip addresses
-| | ... | ${node} | ${interface} | ipv6
-| | ${settings}= | Create Dictionary
-| | ... | ip=${address} | netmask=${netmask} | sw_if_index=${sw_if_index}
-| | ... | prefix_length=${prefix} | is_ipv6=${1}
-| | Should contain | ${vpp_data} | ${settings}
-
-| Honeycomb removes interface IPv6 addresses
-| | [Documentation] | Removes all configured ipv6 addresses from the specified\
-| | ... | interface.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb removes interface IPv6 addresses \| ${nodes['DUT1']} \
-| | ... | \| GigabitEthernet0/8/0 \|
-| | [Arguments] | ${node} | ${interface}
-| | Remove all ipv6 addresses | ${node} | ${interface}
-
-| IPv6 address from Honeycomb should be empty
-| | [Documentation] | Retrieves interface ipv6 configuration through Honeycomb\
-| | ... | and expects to find no IPv6 addresses.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| IPv6 address from Honeycomb should be empty\| ${nodes['DUT1']} \
-| | ... | \| GigabitEthernet0/8/0 \|
-| | [Arguments] | ${node} | ${interface}
-| | ${api_data}= | Get interface oper data | ${node} | ${interface}
-| | Run keyword and expect error | *KeyError:*
-| | ... | Set Variable | ${api_data['ietf-ip:ipv6']['address']}
-
-| IPv6 address from VAT should be empty
-| | [Documentation] | Retrieves interface ipv6 configuration through VAT and\
-| | ... | expects to find no ipv6 addresses.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| IPv6 config from VAT should be empty \| ${nodes['DUT1']} \
-| | ... | \| GigabitEthernet0/8/0 \|
-| | [Arguments] | ${node} | ${interface}
-| | ${data}= | VPP get interface ip addresses | ${node} | ${interface} | ipv6
-| | Should be empty | ${data}
-
-| Honeycomb adds interface IPv6 neighbor
-| | [Documentation] | Uses Honeycomb API to assign an ipv6 neighbor to the\
-| | ... | specified interface.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ... | - fib_address - IP address to add to fib table. Type: string
-| | ... | - fib_mac - MAC address to add to fib table. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb adds interface IPv6 neighbor \| ${nodes['DUT1']} \
-| | ... | \| GigabitEthernet0/8/0 \| 192.168.0.3 \| 08:00:27:c0:5d:37 \|
-| | [Arguments] | ${node} | ${interface} | ${fib_address} | ${fib_mac}
-| | Add ipv6 neighbor
-| | ... | ${node} | ${interface} | ${fib_address} | ${fib_mac}
-
-| IPv6 neighbor from Honeycomb should be
-| | [Documentation] | Retrieves ipv6 neighbor list through Honeycomb\
-| | ... | and checks if it contains address supplied in arguments.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ... | - ip_address - ipv6 address of expected neighbor entry. Type: string
-| | ... | - mac_address - MAC address of expected neighbor entry. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| IPv6 neighbor from Honeycomb should be \| ${nodes['DUT1']} \
-| | ... | \| GigabitEthernet0/8/0 \| 192.168.0.4 \| 08:00:27:60:26:ab \|
-| | [Arguments] | ${node} | ${interface} | ${ip_address} | ${mac_address}
-| | ${api_data}= | Get interface oper data | ${node} | ${interface}
-| | ${settings}= | Create Dictionary
-| | ... | ip=${ip_address} | link-layer-address=${mac_address} | origin=static
-| | Should contain | ${api_data['ietf-ip:ipv6']['neighbor']} | ${settings}
-
-| Honeycomb clears all interface IPv6 neighbors
-| | [Documentation] | Uses Honeycomb API to remove all ipv6 neighbors from the\
-| | ... | specified interface.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb clears all interface IPv6 neighbors \| ${nodes['DUT1']} \
-| | ... | \| GigabitEthernet0/8/0 \|
-| | [Arguments] | ${node} | ${interface}
-| | Remove all ipv6 neighbors | ${node} | ${interface}
-
-| IPv6 neighbor from Honeycomb should be empty
-| | [Documentation] | Retrieves ipv6 neighbor list through Honeycomb\
-| | ... | and expects to find no ipv6 neighbors.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| IPv6 neighbor from Honeycomb should be empty \| ${nodes['DUT1']} \
-| | ... | \| GigabitEthernet0/8/0 \|
-| | [Arguments] | ${node} | ${interface}
-| | ${api_data}= | Get interface oper data | ${node} | ${interface}
-| | Run keyword and expect error | *KeyError:*
-| | ... | Set Variable | ${api_data['ietf-ip:ipv6']['neighbor'][0]['ip']}
-
-| Honeycomb sets interface ethernet configuration
-| | [Documentation] | Uses Honeycomb API to change interface ethernet\
-| | ... | configuration.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ... | - ethernet - interface ethernet settings. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb sets interface ethernet configuration \
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${{'mtu': 1500}} \
-| | [Arguments] | ${node} | ${interface} | ${ethernet}
-| | :FOR | ${key} | IN | @{ethernet.keys()}
-| | | Configure interface ethernet
-| | | ... | ${node} | ${interface} | ${key} | ${ethernet['${key}']}
-
-| Interface ethernet Operational Data From Honeycomb Should Be
-| | [Documentation] | Retrieves interface ethernet configuration\
-| | ... | through Honeycomb and compares with settings supplied in arguments.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ... | - ethernet - interface ethernet settings. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Interface ethernet Operational Data From Honeycomb Should Be \
-| | ... | should be \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \
-| | ... | \| ${{'mtu': 1500}} \|
-| | [Arguments] | ${node} | ${interface} | ${ethernet}
-| | ${api_data}= | Get interface oper data | ${node} | ${interface}
-| | :FOR | ${key} | IN | @{ethernet.keys()}
-| | | Should be equal
-| | | ... | ${api_data['v3po:ethernet']['${key}']} | ${ethernet['${key}']}
-
-| Interface ethernet Operational Data From VAT Should Be
-| | [Documentation] | Retrieves interface ethernet configuration\
-| | ... | through VAT and compares with settings supplied in arguments.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ... | - mtu - value of maximum transmission unit expected. Type: integer
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Interface ethernet Operational Data From VAT Should Be \
-| | ... | should be \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1500} \|
-| | [Arguments] | ${node} | ${interface} | ${mtu}
-| | ${vat_data}= | VPP get interface data | ${node} | ${interface}
-| | Should be equal | ${vat_data['mtu']} | ${mtu}
-
-| Honeycomb sets interface VRF ID
-| | [Documentation] | Uses Honeycomb API to change interface vrf\
-| | ... | configuration.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ... | - vrf_id - vrf ID to configure. Type:integer
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb sets interface VRF ID \
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \| ipv4 \|
-| | [Arguments] | ${node} | ${interface} | ${vrf_id} | ${ip_version}
-| | Configure interface routing
-| | ... | ${node} | ${interface} | ${ip_version}-vrf-id | ${vrf_id}
-
-| Interface VRF ID from Honeycomb should be
-| | [Documentation] | Retrieves interface ethernet configuration\
-| | ... | through Honeycomb and compares with settings supplied in arguments.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ... | - vrf_id - vrf ID to expect. Type:integer
-| | ... | - ip_version - IP protocol version, ipv4 or ipv6. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Interface VRF ID from Honeycomb should be \
-| | ... | should be \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \
-| | ... | \| ipv4 \|
-| | [Arguments] | ${node} | ${interface} | ${vrf_id} | ${ip_version}
-| | ${api_data}= | Get interface oper data | ${node} | ${interface} |
-| | Should be equal
-| | ... | ${api_data['v3po:routing']['${ip_version}-vrf-id']} | ${vrf_id}
-
-| Interface VRF ID from VAT should be
-| | [Documentation] | Retrieves interface ethernet configuration\
-| | ... | through VAT and compares with settings supplied in arguments.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ... | - vrf_id - vrf ID to expect. Type:integer
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Interface VRF ID from VAT should be \
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \|
-| | [Arguments] | ${node} | ${interface} | ${vrf_id}
-| | ${vat_data}= | get interface vrf table
-| | ... | ${node} | ${interface}
-| | Should be equal | ${vat_data} | ${vrf_id}
-
-| Interface Operational Data From Honeycomb Should Be empty
-| | [Documentation] | Attempts to retrieve interface configuration through\
-| | ... | Honeycomb and expects to get empty dictionary.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of a interface on the specified node. Type:\
-| | ... | string
-| | ...
-| | ... | *Example:*
-| | ... | \| Interface Operational Data From Honeycomb Should Be empty\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \|
-| | ...
-| | [Arguments] | ${node} | ${interface}
-| | ${api_data}= | Get interface oper data | ${node} | ${interface}
-| | Should be empty | ${api_data}
-
-| Interface Operational Data From VAT Should Be empty
-| | [Documentation] | Attempts to retrieve Interface configuration through\
-| | ... | VAT and expects to get empty dictionary.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of a Interface on the specified node. Type:\
-| | ... | string
-| | ...
-| | ... | *Example:*
-| | ... | \| Interface Operational Data From VAT Should Be empty\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \|
-| | ...
-| | [Arguments] | ${node} | ${interface} |
-| | ${vat_data}= | VPP get interface data | ${node} | ${interface}
-| | Should be empty | ${vat_data}
-
-| Interface indices from Honeycomb and VAT should correspond
-| | [Documentation] | Uses VAT and Honeycomb to get operational data about the\
-| | ... | given interface and compares the interface indexes. The interface
-| | ... | index from Honeycomb should be greater than index from VAT by one.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of the interface to be checked. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Interface indices from Honeycomb and VAT should correspond \
-| | ... | \| ${nodes['DUT1']} \| vxlan_gpe_tunnel0 \|
-| | ...
-| | [Arguments] | ${node} | ${interface}
-| | ...
-| | ${api_data}= | Get interface oper data | ${node} | ${interface}
-| | ${vat_data}= | VPP get interface data | ${node} | ${interface}
-| | ${sw_if_index}= | EVALUATE | ${vat_data['sw_if_index']} + 1
-| | Should be equal as strings
-| | ... | ${api_data['if-index']} | ${sw_if_index}
-
-| Get interface index from oper data
-| | [Documentation] | Retrieves interface operational data and returns\
-| | ... | if-index of the specified interface.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of the interface. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Get interface index from oper data \| ${nodes['DUT1']} \| local0 \|
-| | [Arguments] | ${node} | ${interface}
-| | ${data}= | Get interface oper data | ${node} | ${interface}
-| | Return from keyword | ${data['if-index']}
-
-| Honeycomb should show disabled interface in oper data
-| | [Documentation] | Retrieves list of disabled interfaces\
-| | ... | and verifies that there is at least one.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - index - index of the interface to be checked. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb should show disabled interface in oper data \
-| | ... | \| ${nodes['DUT1']} \| ${vx_interface} \|
-| | [Arguments] | ${node} | ${index}
-| | check disabled interface | ${node} | ${index}
-
-| Honeycomb should not show disabled interface in oper data
-| | [Documentation] | Retrieves list of disabled interfaces\
-| | ... | and expects to fail with a 404 - not found.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - index - index of the interface to be checked. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb should not show disabled interface in oper data \
-| | ... | \| ${nodes['DUT1']} \| ${vx_interface} \|
-| | [Arguments] | ${node} | ${index}
-| | Run keyword and expect error | *
-| | ... | Honeycomb should show disabled interface in oper data
-| | ... | ${node} | ${index}
-
-| Ping and verify IP address
-| | [Documentation] | Sends ICMP packet from IP (with source mac) to IP
-| | ... | (with dest mac), then waits for ICMP reply.
-| | ...
-| | ... | *Arguments:*
-| | ...
-| | ... | _NOTE:_ Arguments are based on topology:
-| | ... | TG(if1)->(if1)DUT(if2)->TG(if2)
-| | ...
-| | ... | - tg_node - Node to execute scripts on (TG). Type: dictionary
-| | ... | - src_ip - IP of source interface (TG-if1). Type: integer
-| | ... | - dst_ip - IP of destination interface (TG-if2). Type: integer
-| | ... | - tx_port - Source interface (TG-if1). Type: string
-| | ... | - tx_mac - MAC address of source interface (TG-if1). Type: string
-| | ... | - rx_port - Destionation interface (TG-if1). Type: string
-| | ... | - rx_mac - MAC address of destination interface (TG-if1). Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Ping verify IP address \| ${nodes['TG']} \
-| | ... | \| 16.0.0.1 \| 32.0.0.1 \| eth2 \| 08:00:27:cc:4f:54 \
-| | ... | \| eth4 \| 08:00:27:c9:6a:d5 \|
-| | ...
-| | [Arguments] | ${tg_node} | ${src_ip} | ${dst_ip} | ${tx_port} |
-| | ... | ${tx_mac} | ${rx_port} | ${rx_mac}
-| | ${tx_port_name}= | Get interface name | ${tg_node} | ${tx_port}
-| | ${rx_port_name}= | Get interface name | ${tg_node} | ${rx_port}
-| | ${args}= | Catenate | --src_mac | ${tx_mac}
-| | ... | --dst_mac | ${rx_mac}
-| | ... | --src_ip | ${src_ip}
-| | ... | --dst_ip | ${dst_ip}
-| | ... | --tx_if | ${tx_port_name}
-| | ... | --rx_if | ${rx_port_name}
-| | ... | --timeout | ${5}
-| | Run Traffic Script On Node | send_icmp_wait_for_reply.py
-| | ... | ${tg_node} | ${args}
-
-| Honeycomb adds unnumbered configuration to interface
-| | [Documentation] | Adds unnumbered configuration to interface, borrowing IP
-| | ... | address from the other specified interface.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - Name of the interface to be configured. Type: string
-| | ... | - interface_src - Name of the interface to borrow IP address from.\
-| | ... | Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb adds unnumbered configuration to interface \
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| GigabitEthernet0/9/0 \|
-| | ...
-| | [Arguments] | ${node} | ${Interface} | ${interface_src}
-| | Configure interface unnumbered | ${node} | ${interface} | ${interface_src}
-
-| Honeycomb removes unnumbered configuration from interface
-| | [Documentation] | Removes unnumbered configuration from the specified
-| | ... | interface.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - Name of the interface to be configured. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb adds unnumbered configuration to interface \
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \|
-| | ...
-| | [Arguments] | ${node} | ${Interface}
-| | Configure interface unnumbered | ${node} | ${interface}
Code Review / csit.git / blobdiff