--- /dev/null
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Library | resources.libraries.python.honeycomb.Lisp.LispGPEKeywords
+| Library | resources.libraries.python.LispUtil
+| Documentation | Keywords used to test Honeycomb Lisp GPE features.
+
+*** Keywords ***
+| Honeycomb enables LISP GPE
+| | [Documentation] | Uses Honeycomb API to enable LISP GPE.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Honeycomb enables LISP GPE \| ${nodes['DUT1']} \|
+| | ...
+| | [Arguments] | ${node}
+| | ...
+| | Set LISPGPE state | ${node} | ${TRUE}
+
+| Honeycomb disables LISP GPE
+| | [Documentation] | Uses Honeycomb API to disable LISP GPE.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Honeycomb disables LISP GPE \| ${nodes['DUT1']} \|
+| | ...
+| | [Arguments] | ${node}
+| | ...
+| | Set LISPGPE state | ${node} | ${FALSE}
+
+| Honeycomb adds first LISP GPE Mapping
+| | [Documentation] | Uses Honeycomb API to configure a LISP mapping. Removes
+| | ... | any existing mappings.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - data - LISP settings to use. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Honeycomb adds first LISP GPE Mapping \| ${nodes['DUT1']} \
+| | ... | \| ${data} \|
+| | ...
+| | [Arguments] | ${node} | ${data}
+| | ...
+| | Configure LISPGPE Mapping | ${node} | ${data}
+
+| Honeycomb adds LISP GPE Mapping
+| | [Documentation] | Uses Honeycomb API to configure a LISP mapping.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - data - LISP settings to use. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Honeycomb adds LISP GPE Mapping \| ${nodes['DUT1']} \| ${data} \|
+| | ...
+| | [Arguments] | ${node} | ${data}
+| | ...
+| | Add LISPGPE Mapping | ${node} | ${data['id']} | ${data}
+
+| Honeycomb removes LISP GPE mapping
+| | [Documentation] | Uses Honeycomb API to remove the specified mapping.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Honeycomb removes LISP GPE mapping \| ${nodes['DUT1']} \
+| | ... | \| map_name \|
+| | ...
+| | [Arguments] | ${node} | ${mapping}
+| | ...
+| | Delete LISPGPE mapping | ${node} | ${mapping}
+
+| LISP GPE should not be configured
+| | [Documentation] | Retrieves LISP GPE configuration from Honeycomb operational\
+| | ... | data, and expects an empty dictionary.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| LISP GPE should not be configured \| ${nodes['DUT1']} \|
+| | ...
+| | [Arguments] | ${node}
+| | ...
+| | ${data}= | Get LISP GPE operational data | ${node}
+| | Should be Equal
+| | ... | ${data['gpe-state']['gpe-feature-data']['enable']} | ${FALSE}
+
+| LISP GPE state from Honeycomb should be
+| | [Documentation] | Retrieves LISP GPE state from Honeycomb operational\
+| | ... | data, and compares LISP state with expected value.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - state - Expected LISP state. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| LISP GPE state from Honeycomb should be \| ${nodes['DUT1']} \
+| | ... | \| enabled \|
+| | ...
+| | [Arguments] | ${node} | ${state}
+| | ...
+| | ${data}= | Get LISPGPE operational data | ${node}
+| | Run keyword if | $state == 'enabled'
+| | ... | Should be equal as strings
+| | ... | ${data['gpe-state']['gpe-feature-data']['enable']} | ${True}
+| | Run keyword if | $state == 'disabled'
+| | ... | Should be equal as strings
+| | ... | ${data['gpe-state']['gpe-feature-data']['enable']} | ${False}
+
+| LISP GPE state from VAT should be
+| | [Documentation] | Retrieves LISP state from VAT,\
+| | ... | and compares LISP state with expected value.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - state - Expected LISP state. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| LISP state from VAT should be \| ${nodes['DUT1']} \| enabled \|
+| | ...
+| | [Arguments] | ${node} | ${state}
+| | ...
+| | ${status}= | VPP show LISP State | ${node}
+| | Should match | ${status['gpe_status']} | ${state}
+
+| LISP GPE mapping from Honeycomb should be
+| | [Documentation] | Retrieves LISP GPE mapping from Honeycomb operational\
+| | ... | data, and compares with expected data.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - settings - Expected LISP mapping data. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| LISP GPE mapping from Honeycomb should be \| ${nodes['DUT1']} \
+| | ... | \| ${settings} \|
+| | ...
+| | [Arguments] | ${node} | ${settings}
+| | ...
+| | ${data}= | Get LISPGPE mapping | ${node} | ${settings['id']}
+| | Compare data structures | ${data} | ${settings}
+
+| LISP GPE mappings from Honeycomb should not exist
+| | [Documentation] | Retrieves LISP GPE mappings from operational\
+| | ... | data, and expects to find none.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| LISP GPE mappings from Honeycomb should not exist \
+| | ... | \| ${nodes['DUT1']} \|
+| | ...
+| | [Arguments] | ${node}
+| | ...
+| | ${data}= | Get LISPGPE operational data | ${node}
+| | Variable Should Not Exist
+| | ... | ${data['gpe-state']['gpe-feature-data']['gpe-entry']}
+
+| Honeycomb disables all LISP GPE features
+| | [Documentation] | Uses Honeycomb API to remove all LISP GPE configuration.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Honeycomb disables all LISP GPE features \| ${nodes['DUT1']} \|
+| | ...
+| | [Arguments] | ${node}
+| | ...
+| | Disable LISPGPE | ${node}
+
+| Send packet and verify LISP GPE encap
+| | [Documentation] | Send ICMP packet to DUT out one interface and receive\
+| | ... | a LISP-GPE encapsulated packet on the other interface.
+| | ...
+| | ... | *Arguments:*
+| | ...
+| | ... | _NOTE:_ Arguments are based on topology:
+| | ... | TG(if1)->(if1)DUT(if2)->TG(if2)
+| | ...
+| | ... | - tg_node - Node to execute scripts on (TG). Type: dictionary
+| | ... | - src_ip - IP of source interface (TG-if1). Type: string
+| | ... | - dst_ip - IP of destination interface (TG-if2). Type: string
+| | ... | - tx_src_port - Interface of TG-if1. Type: string
+| | ... | - tx_src_mac - MAC address of TG-if1. Type: string
+| | ... | - tx_dst_mac - MAC address of DUT-if1. Type: string
+| | ... | - rx_port - Interface of TG-if1. Type: string
+| | ... | - rx_src_mac - MAC address of DUT1-if2. Type: string
+| | ... | - rx_dst_mac - MAC address of TG-if2. Type: string
+| | ... | - src_rloc - configured RLOC source address. Type: string
+| | ... | - dst_rloc - configured RLOC destination address. Type: string
+| | ...
+| | ... | *Return:*
+| | ... | - No value returned
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Send packet and verify LISP GPE encap \| ${nodes['TG']} \
+| | ... | \| 10.0.0.1 \| 32.0.0.1 \|
+| | ... | \| eth2 \| 08:00:27:ee:fd:b3 \| 08:00:27:a2:52:5b \
+| | ... | \| eth3 \| 08:00:27:4d:ca:7a \| 08:00:27:7d:fd:10 \
+| | ... | \| 10.0.1.1 \| 10.0.1.2 \|
+| | ...
+| | [Arguments] | ${tg_node} | ${src_ip} | ${dst_ip} | ${tx_src_port} |
+| | ... | ${tx_src_mac} | ${tx_dst_mac} | ${rx_port} | ${rx_src_mac}
+| | ... | ${rx_dst_mac} | ${src_rloc} | ${dst_rloc}
+| | ...
+| | ${tx_port_name}= | Get interface name | ${tg_node} | ${tx_src_port}
+| | ${rx_port_name}= | Get interface name | ${tg_node} | ${rx_port}
+| | ${args}= | Catenate | --tg_src_mac | ${tx_src_mac} | --tg_dst_mac
+| | ... | ${rx_dst_mac} | --dut_if1_mac | ${tx_dst_mac} | --dut_if2_mac
+| | ... | ${rx_src_mac} | --src_ip | ${src_ip} | --dst_ip | ${dst_ip}
+| | ... | --tx_if | ${tx_port_name} | --rx_if | ${rx_port_name}
+| | ... | --src_rloc | ${src_rloc} | --dst_rloc | ${dst_rloc}
+| | Run Traffic Script On Node | lisp/lispgpe_check.py | ${tg_node}
+| | ... | ${args}
+
+| LISPGPE Functional Traffic Test Teardown
+| | [Documentation] | Teardown for LISP GPE functional traffic test.
+| | Show Packet Trace on all DUTs | ${nodes}
+| | VPP Show LISP EID Table | ${node}
+| | Disable LISPGPE | ${node}
Code Review / csit.git / blobdiff