HONEYCOMB: Remove

[csit.git] / resources / libraries / robot / honeycomb / nat.robot

diff --git a/resources/libraries/robot/honeycomb/nat.robot b/resources/libraries/robot/honeycomb/nat.robot
deleted file mode 100644 (file)
index c02507f..0000000
--- a/resources/libraries/robot/honeycomb/nat.robot
+++ /dev/null
@@ -1,157 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.honeycomb.HcAPIKwInterfaces.InterfaceKeywords
-| Library | resources.libraries.python.honeycomb.NAT.NATKeywords
-| Documentation | Keywords used to test Honeycomb NAT node.
-
-*** Keywords ***
-| NAT Operational Data From Honeycomb Should Be empty
-| | [Documentation] | Uses Honeycomb API to retrieve NAT operational data\
-| | ... | and expects to find only default values.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - default_settings - NAT default settings. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| NAT Operational Data From Honeycomb Should Be empty \
-| | ... | \| ${nodes['DUT1']} \| ${default_settings} \|
-| | [Arguments] | ${node} | ${default_settings}
-| | ${data}= | Get NAT Oper data | ${node}
-| | Compare data structures | ${data} | ${default_settings}
-
-| Honeycomb configures NAT entry
-| | [Documentation] | Uses Honeycomb API to configure a static NAT entry.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - data - NAT entry to configure. Type: dictionary
-| | ... | - instance - NAT instance on VPP node. Type: integer
-| | ... | - index - Index of NAT entry. Type: integer
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb configures NAT entry \| ${nodes['DUT1']} \| ${data} \
-| | ... | \| ${0} \| ${1} \|
-| | [Arguments] | ${node} | ${data} | ${instance}=0 | ${index}=1
-| | Configure NAT entries | ${node} | ${data} | ${instance} | ${index}
-
-| NAT entries from Honeycomb should be
-| | [Documentation] | Uses Honeycomb API to retrieve NAT operational data\
-| | ... | and compares against expected settings.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - settings - NAT entry to expect. Type: dictionary
-| | ... | - instance - NAT instance on VPP node. Type: integer
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| NAT entries from Honeycomb should be \| ${nodes['DUT1']} \
-| | ... | \| ${settings} \| ${0} \|
-| | [Arguments] | ${node} | ${settings} | ${instance}=0
-| | ${data}= | Get NAT Oper data | ${node}
-| | ${data}= | Set Variable
-| | ... | ${data['instances']['instance'][${instance}]['mapping-table']}
-| | Compare data structures | ${data} | ${settings}
-
-| Honeycomb configures NAT on interface
-| | [Documentation] | Uses Honeycomb API to configure NAT on an interface.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the node. Type: string
-| | ... | - direction - NAT direction parameter, inbound or outbound.\
-| | ... | Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb configures NAT on interface \| ${nodes['DUT1']} \
-| | ... | \| GigabitEthernet0/8/0 \| outbound \|
-| | [Arguments] | ${node} | ${interface} | ${direction}
-| | Configure NAT on interface
-| | ... | ${node} | ${interface} | ${direction}
-
-| Honeycomb removes NAT interface configuration
-| | [Documentation] | Uses Honeycomb API to remove an existing NAT interface\
-| | ... | configuration.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the node. Type: string
-| | ... | - direction - NAT direction parameter, inbound or outbound.\
-| | ... | Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb removes NAT interface configuration \| ${nodes['DUT1']} \
-| | ... | \| GigabitEthernet0/8/0 \| outbound \|
-| | [Arguments] | ${node} | ${interface} | ${direction}
-| | Configure NAT on interface
-| | ... | ${node} | ${interface} | ${direction} | ${True}
-
-| NAT interface Operational Data From Honeycomb Should Be
-| | [Documentation] | Uses Honeycomb API to retrieve interface operational data\
-| | ... | and compares the NAT section against expected settings.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the node. Type: string
-| | ... | - direction - NAT direction parameter, inbound or outbound.\
-| | ... | Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| NAT interface Operational Data From Honeycomb Should Be \
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| outbound \|
-| | [Arguments] | ${node} | ${interface} | ${direction}
-| | ${data}= | Get interface oper data | ${node} | ${interface}
-| | Variable should exist | ${data['interface-nat:nat']['${direction}']}
-
-| NAT interface Operational Data From Honeycomb Should Be empty
-| | [Documentation] | Uses Honeycomb API to retrieve interface operational data\
-| | ... | and expects to find no data for the given direction.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the node. Type: string
-| | ... | - direction - NAT direction parameter, inbound or outbound.\
-| | ... | Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| NAT interface Operational Data From Honeycomb Should Be empty \
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| outbound \|
-| | [Arguments] | ${node} | ${interface} | ${direction}
-| | ${data}= | Get interface oper data | ${node} | ${interface}
-| | Variable should not exist | ${data['interface-nat:nat']['${direction}']}
-
-| NAT interface Operational Data From VAT Should Be
-| | [Documentation] | Uses Honeycomb API to retrieve NAT configured interfaces\
-| | ... | and compares with expected settings.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - settings - settings to expect. Type: dictionary
-| | ... | Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| NAT interface Operational Data From VAT Should Be \
-| | ... | \| ${nodes['DUT1']} \| ${settings} \|
-| | [Arguments] | ${node} | ${settings}
-| | ${data}= | VPP get NAT interfaces | ${node}
-| | Compare data structures | ${data} | ${settings}