| | ... | ${node} | ${super_interface} | ${identifier}
| | interfaceAPI.Compare Data Structures | ${api_data} | ${sub_if_settings}
+| Sub-interface configuration from Honeycomb should be empty
+| | [Documentation] | Retrieves sub-interface configuration through Honeycomb \
+| | ... | and expects no data.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - super_interface - Super-interface. Type: string
+| | ... | - identifier - Sub-interface ID. Type: integer or string
+| | ...
+| | ... | *Example:*
+| | ... | \| Sub-interface configuration from Honeycomb should be empty\
+| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \|
+| | ...
+| | [Arguments] | ${node} | ${super_interface} | ${identifier}
+| | ...
+| | Run keyword and expect error | *KeyError: 'vpp-vlan:sub-interfaces'*
+| | ... | interfaceAPI.Get sub interface oper data
+| | ... | ${node} | ${super_interface} | ${identifier}
+
+| Sub-interface state from Honeycomb should be
+| | [Documentation] | Retrieves sub-interface configuration through Honeycomb \
+| | ... | and checks the administrative and operational state.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - super_interface - Super-interface. Type: string
+| | ... | - identifier - Sub-interface ID. Type: integer or string
+| | ... | - admin_state - Required administrative state - up or down. \
+| | ... | Type: string
+| | ... | - oper_state - Required operational state - up or down. Type: string
+| | ...
+| | ... | *Example:*
+| | ... | \| Sub-interface state from Honeycomb should be\
+| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \| up \| up \|
+| | ...
+| | [Arguments] | ${node} | ${super_interface} | ${identifier}
+| | ... | ${admin_state} | ${oper_state}
+| | ...
+| | ${api_data}= | interfaceAPI.Get sub interface oper data
+| | ... | ${node} | ${super_interface} | ${identifier}
+| | Should be equal | ${api_data['admin-status']} | ${admin_state}
+| | Should be equal | ${api_data['oper-status']} | ${oper_state}
+
| Sub-interface configuration from VAT should be
| | [Documentation] | Retrieves sub-interface configuration through VAT and\
| | ... | compares it with settings supplied in argument.
| | ... | Should be equal as strings
| | ... | ${sub_interface_settings['oper-status']} | up
+| Sub-interface state from VAT should be
+| | [Documentation] | Retrieves sub-interface configuration through VAT and \
+| | ... | checks the administrative and operational state.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - sub_interface - Name of an sub-interface on the specified node. \
+| | ... | Type: string
+| | ... | - admin_state - Required administrative state - up or down. \
+| | ... | Type: string
+| | ... | - oper_state - Required operational state - up or down. Type: string
+| | ...
+| | ... | *Example:*
+| | ... | \| Sub-interface state from VAT should be \
+| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0.1 \| up \| up \|
+| | ...
+| | [Arguments] | ${node} | ${sub_interface} | ${admin_state} | ${oper_state}
+| | ...
+| | ${vat_data}= | InterfaceCLI.VPP get interface data
+| | ... | ${node} | ${sub_interface}
+| | Run keyword if | '${admin_state}' == 'down'
+| | ... | Should be equal as strings | ${vat_data['admin_up_down']} | 0
+| | Run keyword if | '${admin_state}' == 'up'
+| | ... | Should be equal as strings | ${vat_data['admin_up_down']} | 1
+| | Run keyword if | '${oper_state}' == 'down'
+| | ... | Should be equal as strings | ${vat_data['link_up_down']} | 0
+| | Run keyword if | '${oper_state}' == 'up'
+| | ... | Should be equal as strings | ${vat_data['link_up_down']} | 1
+
| Sub-interface indices from Honeycomb and VAT should correspond
| | [Documentation] | Uses VAT and Honeycomb to get operational data about the\
| | ... | given sub-interface and compares the interface indexes. The
| | [Arguments] | ${node} | ${super_if} | ${identifier} | ${settings}
| | ${api_data}= | interfaceAPI.Get tag rewrite oper data
| | ... | ${node} | ${super_if} | ${identifier}
-| | interfaceAPI.Compare Data Structures | ${api_data} | ${settings}
+| | interfaceAPI.Compare Data Structures
+| | ... | ${api_data} | ${settings}
| Rewrite tag from VAT should be
| | [Documentation] | Retrieves sub-interface configuration through VAT and\
| | ...
| | ${sw_if_index}= | interfaceCLI.Get sw if index | ${node} | ${sub_interface}
| | L2 tag rewrite | ${node} | ${sw_if_index} | disable
+
+| Honeycomb sets sub-interface ipv4 address
+| | [Documentation] | Uses Honeycomb API to configure an ipv4 address on the\
+| | ... | spcified sub-interface. Replaces any existing ipv4 addresses.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - super_if - Super-interface. Type: string
+| | ... | - identifier - Sub-interface ID. Type: integer or string
+| | ... | - address - IPv4 address to set. Type: string
+| | ... | - prefix - IPv4 network prefix length to set. Type: integer
+| | ...
+| | ... | *Example:*
+| | ... | \| | Honeycomb sets sub-interface ipv4 address\
+| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \
+| | ... | \| 192.168.0.2 \| ${24} \|
+| | ...
+| | [Arguments] | ${node} | ${super_if} | ${identifier} | ${address} | ${prefix}
+| | Add ipv4 address to sub_interface
+| | ... | ${node} | ${super_if} | ${identifier} | ${address} | ${prefix}
+
+| Sub-interface ipv4 address from Honeycomb should be
+| | [Documentation] | Uses Honeycomb API to verify ipv4 address configuration\
+| | ... | on the specified sub-interface.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - super_if - Super-interface. Type: string
+| | ... | - identifier - Sub-interface ID. Type: integer or string
+| | ... | - address - IPv4 address to expect. Type: string
+| | ... | - prefix - IPv4 network prefix length to expect. Type: integer
+| | ...
+| | ... | *Example:*
+| | ... | \| sub-interface ipv4 address from Honeycomb should be\
+| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \
+| | ... | \| 192.168.0.2 \| ${24} \|
+| | ...
+| | [Arguments] | ${node} | ${super_if} | ${identifier} | ${address} | ${prefix}
+| | ${if_data}= | interfaceAPI.Get sub interface oper data
+| | ... | ${node} | ${super_if} | ${identifier}
+| | Should be equal
+| | ... | ${if_data['ipv4']['address'][0]['ip']} | ${address}
+| | Should be equal
+| | ... | ${if_data['ipv4']['address'][0]['prefix-length']} | ${prefix}
+
+| Sub-interface ipv4 address from VAT should be
+| | [Documentation] | Uses VAT to verify ipv4 address configuration\
+| | ... | on the specified sub-interface.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - sub_interface - Name of an sub-interface on the specified node.\
+| | ... | Type: string
+| | ... | - address - IPv4 address to expect. Type: string
+| | ... | - prefix - IPv4 network prefix length to expect. Type: integer
+| | ...
+| | ... | *Example:*
+| | ... | \| sub-interface ipv4 address from VAT should be\
+| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0.1 \|
+| | ...
+| | [Arguments] | ${node} | ${sub_interface} | ${address} | ${prefix}
+| | ${data}= | VPP get interface ip addresses
+| | ... | ${node} | ${sub_interface} | ipv4
+| | Should be equal | ${data[0]['ip']} | ${address}
+#TODO: update based on resolution of bug https://jira.fd.io/browse/VPP-132
+| | Should be equal | ${data[0]['prefix_length']} | ${prefix}
+
+| Honeycomb removes all sub-interface ipv4 addresses
+| | [Documentation] | Uses Honeycomb API to remove all configured ipv4\
+| | ... | addresses from the sub-interface.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - super_if - Super-interface. Type: string
+| | ... | - identifier - Sub-interface ID. Type: integer or string
+| | ...
+| | ... | *Example:*
+| | ... | \| Honeycomb removes all sub-interface ipv4 addresses\
+| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \|
+| | ...
+| | [Arguments] | ${node} | ${super_if} | ${identifier}
+| | Remove all ipv4 addresses from sub_interface
+| | ... | ${node} | ${super_if} | ${identifier}
+
+| Sub-interface ipv4 address from Honeycomb should be empty
+| | [Documentation] | Uses Honeycomb API to verify that ipv4 address\
+| | ... | configuration on the specified sub-interface is empty.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - super_if - Super-interface. Type: string
+| | ... | - identifier - Sub-interface ID. Type: integer or string
+| | ...
+| | ... | *Example:*
+| | ... | \| sub-interface ipv4 address from Honeycomb should be empty\
+| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \|
+| | ...
+| | [Arguments] | ${node} | ${super_if} | ${identifier}
+| | ${if_data}= | interfaceAPI.Get sub interface oper data
+| | ... | ${node} | ${super_if} | ${identifier}
+| | Run keyword and expect error | *KeyError: 'ipv4'*
+| | ... | Set Variable | ${if_data['ipv4']['address'][0]['ip']}
+
+| Sub-interface ipv4 address from VAT should be empty
+| | [Documentation] | Uses VAT to verify that ipv4 address\
+| | ... | configuration on the specified sub-interface is empty.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - sub_interface - Name of an sub-interface on the specified node.\
+| | ... | Type: string
+| | ...
+| | ... | *Example:*
+| | ... | \| sub-interface ipv4 address from VAT should be empty\
+| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0.1 \|
+| | ...
+| | [Arguments] | ${node} | ${sub_interface}
+| | Run keyword and expect error | *No JSON object could be decoded*
+| | ... | VPP get interface ip addresses | ${node} | ${sub_interface} | ipv4
Code Review / csit.git / blobdiff